1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
|
/* Timer_init()
*
* This routine initializes the timer on the IBM 386.
*
* Input parameters: NONE
*
* Output parameters: NONE
*
* NOTE: It is important that the timer start/stop overhead be
* determined when porting or modifying this code.
*
* COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
* On-Line Applications Research Corporation (OAR).
* All rights assigned to U.S. Government, 1994.
*
* This material may be reproduced by or for the U.S. Government pursuant
* to the copyright license under the clause at DFARS 252.227-7013. This
* notice must appear in all copies of this file and its derivatives.
*
* $Id$
*/
#include <rtems.h>
#include <cpu.h>
#include <bsp.h>
volatile rtems_unsigned32 Ttimer_val;
rtems_boolean Timer_driver_Find_average_overhead;
#if defined(pentium)
static inline unsigned long long rdtsc( void )
{
/* Return the value of the on-chip cycle counter. */
unsigned long long result;
__asm __volatile( ".byte 0x0F, 0x31" : "=A" (result) );
return result;
}
#else /* pentium */
rtems_isr timerisr();
#endif /* pentium */
void Timer_initialize()
{
#if defined(pentium)
Ttimer_val = rdtsc();
#else /* pentium */
static int First = 1;
if ( First ) {
/* install ISR */
set_vector( timerisr, 0x8, 0 );
/* Wait for ISR to be called at least once */
Ttimer_val = 0;
while ( Ttimer_val == 0 )
continue;
/* load timer for 250 microsecond period */
outport_byte( TIMER_MODE, TIMER_SEL0|TIMER_16BIT|TIMER_RATEGEN );
outport_byte( TIMER_CNTR0, US_TO_TICK(250) >> 0 & 0xff);
outport_byte( TIMER_CNTR0, US_TO_TICK(250) >> 8 & 0xff);
First = 0;
}
Ttimer_val = 0; /* clear timer ISR count */
#endif /* PENTIUM */
}
#define AVG_OVERHEAD 0 /* 0.1 microseconds to start/stop timer. */
#define LEAST_VALID 1 /* Don't trust a value lower than this */
int Read_timer()
{
register rtems_unsigned32 total;
#if defined(pentium)
total = rdtsc() - Ttimer_val;
#else /* pentium */
register rtems_unsigned8 lsb, msb;
register rtems_unsigned32 clicks;
outport_byte( TIMER_MODE, TIMER_SEL0|TIMER_LATCH );
inport_byte( TIMER_CNTR0, lsb );
inport_byte( TIMER_CNTR0, msb );
clicks = msb << 8 | lsb;
total = Ttimer_val + 250 - TICK_TO_US( clicks );
#endif /* pentium */
if ( Timer_driver_Find_average_overhead == 1 )
return total;
else if ( total < LEAST_VALID )
return 0; /* below timer resolution */
else
return total - AVG_OVERHEAD;
}
rtems_status_code Empty_function( void )
{
return RTEMS_SUCCESSFUL;
}
void Set_find_average_overhead(
rtems_boolean find_flag
)
{
Timer_driver_Find_average_overhead = find_flag;
}
|
