1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
|
;
; $Id$
;
;#{
;# SCCS INFORMATION:
;# SID = @(#)sa29200.lnk 4.1; DLU=95/09/14-11:05:57
;# Q = @(#) Copyright (C) 1995 Advanced Micro Devices, Inc.
;# Module Type = @(#) OSBOOT/DBG_CORE absolute liker file (AMD-EPD-29K, AMIR)
;# SCCS Path = %P\%
;# SCCS File = %F\%
;# FileName = sa29200.lnk
;# SCCS ID = 4.1
;# Date Update = 14 Sep 1995, (DLU=95/09/14-11:05:57)
;# Date Extract = 12 Oct 1995, (DLE=95/10/12-16:27:31)
;#}
; @(#)sa29200.lnk 3.6 94/08/22 11:58:54, Srini, AMD.
; This is the linker command file used to bind the inrementally linked
; osboot.o module to a memory map. This also defines some link-time constants
; used in the code. These constants are genral for all 29K family members.
; You only need to customize, if necessary, the definitions that affect
; your target processor, and leave the rest alone.
; The default values in this file are for binding osboot.o for use with
; SA29200 stand-alone board with the -29200/-29205 option.
;
; Order the code segments according to the memory map structure.
; The defaul OSBOOT has only .text and .bss sections. You need to ORDER
; other sections of your applications that are not included below.
; We use separate ORDER statements below to distinguish the two memory
; regions used. The text section is bound to ROM memory region, and the
; data region to RAM memory space.
; MAKE SURE to order the BSS section at the very end. This is because the
; BSS section size could get adjusted after linking with raminit.o (produced
; by romcoff utility) or other initialization routines. This change in size
; could affect the offsets used by the program to refer to the remaining data
; sections that follow BSS.
ALIGN ProcInit=16
ORDER Reset=0x0
ORDER ProcInit,OsbText,.text,!text
ORDER .lit,!lit
ORDER vectable=0x40000000
ORDER msg_data=0x40000400
ORDER .data,!data
ORDER OsbBss,dbg_030,dbg_bss,cfg_bss,.bss,!bss
ORDER HeapBase
ORDER .comment
; For Stand-Alone application out of ROM use the ORDER statements below:
; For Stand-Alone application out of RAM use the ORDER statement below:
;ORDER Reset=0x40010000,ProcInit,OsbText,.text,!text,.lit,!lit,.data,!data,msg_data,dbg_dat,.bss,!bss,HeapBase,.comment
;
; definitions of link time constants used in code.
;
; Definition of the initial value of CPS register.
; The value below is for an Am29200 processor. It sets TU, SM,DI, DA,IM fields
; bits in the register. You may modify it to suit your target environment.
; Like, changing the IM field for instance. IM is 0x11 by default enabling
; all INTR[0-3] lines.
;public _init_CPS=0x87F
public _init_CPS=0x20813
;public _init_CPS=0x2081F
;public _init_CPS=0x081F
; Define the memory map in general values. The code - except for simulators -
; configures the external RAM at run-time and updates the DMemSize value.
; DMemStart and DMemSize are the most important values below. DMemStart is
; used to initialize the vector base address register (VAB). And DMemSize
; is used to find the highest addressable data memory to place the register
; and memory stacks. Remember, DMemSize is configured at run-time for hardware
; targets and updated.
public VectorBaseAddress=0x40000000
public IMemStart=0x0000000
public IMemSize=0xfffff
public DMemStart=0x40000000
#public DMemStart=0x100000
public DMemSize=0xfffff
#public DMemSize=0x17ffff
#public DMemSize=0x3fffffff
public RMemStart=0x0
public RMemSize=0xfffff
public EnableDRAMSizing=1
;
; For the 29K Microcontrollers, you need to define the ROM Control register
; value (RMCT_VALUE), the ROM Configuration register value (RMCF_VALUE), and
; the DRAM Control register value (DRCT_VALUE) based on DMemSize specified
; above. This could be overwritten in software targets such as the simulator.
; ROM and RAM Control registers. ROM COnfiguration. (not valid for Am2900X,
; Am29050, and Am2903X processors)
; The DRAM REFRATE value (in DRCT) must be specified here. To disable
; DRAM refreshing (on a system with no DRAM), set REFRATE field in DRCT
; to zero. Otherwise, set it to the desired frequency. The default is 0xFF
; The default values in this file are for Am2920X processors.
;public RMCT_VALUE=0x03030303
;public DRCT_VALUE=0x888800FF
;public RMCF_VALUE=0x00f8f8f8
;
public RMCT_VALUE=0x4a424300
public DRCT_VALUE=0xccc000f0
public RMCF_VALUE=0x011121ff
;
;
; Execute trap handlers from ROM? If your trap handlers are in ROM space,
; then set _TRAPINROM to TWO (0x2). It is used to modify the tarp vector
; address installed to set the R bit when fetched. If the trap handlers in
; ROM or if there is no ROM-space (no RE bit in CPS), set _TRAPINROM to ZERO.
; The default in this file is for SA29200 board and _TRAPINROM is set to ZERO.
public _TRAPINROM=0
;
; Define the processor clock frequencies. These values are used by the HIF
; kernel to provide some HIF services.
public TicksPerMillisecond=16000
public ClockFrequency=16000000
;
; There are some C functions which are not leaf functions. However, they are
; no expected to spill or fill registers. We ensure that by setting up a
; pseudo register stack before calling those functions. The code generated
; for those functions however do have the prologue and epilogue which refer
; to the symbols V_SPILL and V_FILL. The linker does not know about these
; symbols. So we define it here so that it does not complain.
; If you use the hc29 compiler driver to link the objects it will warn that
; the definitions here are already internally defined. You
; can use hc29 with -nocrt0 option to do the linking for linear memory spaces.
; public V_SPILL=64
; public V_FILL=65
;
; Set the UART debug/monitor port serial communications baud rate.
;
public UCLK=32000000
; INITBAUD defines the cold start baud rate. This is the baud rate
; the monitor would use when powered up. This can be overridden by
; defining BAUDRATE on the assembler/compiler command line.
public INITBAUD=9600
;
; Is there a SCC 8530 on the target?
; If there is an 8530 SC on target, define the symbols below appropriately.
; The routines in scc8530.s use these values to access the registers of
; SCC and program it. The default values are for EZ030 target.
; Baudrate can be specified on the command-line to override the default
; baud rate defined in scc8530.s.
; scc channel A control
;public SCC8530_CHA_CONTROL=0xC0000007
; scc channel B control
;public SCC8530_CHB_CONTROL=0xC0000003
; scc channel A data
;public SCC8530_CHA_DATA=0xC000000F
; scc channel B data
;public SCC8530_CHB_DATA=0xC000000B
; scc baud clock generator
;public SCC8530_BAUD_CLK_ENBL=3
|
