1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
|
/* SPDX-License-Identifier: BSD-2-Clause */
/*
* This routine does the bulk of the system initialization.
*/
/*
* The MPC860 specific stuff was written by Jay Monkman (jmonkman@frasca.com)
*
* Modified for the MPC8260ADS board by Andy Dachs <a.dachs@sstl.co.uk>
* Surrey Satellite Technology Limited, 2001
* A 40MHz system clock is assumed.
* The PON. RST.CONF. Dip switches (DS1) are
* 1 - Off
* 2 - On
* 3 - Off
* 4 - On
* 5 - Off
* 6 - Off
* 7 - Off
* 8 - Off
* Dip switches on DS2 and DS3 are all set to ON
* The LEDs on the board are used to signal panic and fatal_error
* conditions.
* The mmu is unused at this time.
*
* COPYRIGHT (c) 1989-2007.
* On-Line Applications Research Corporation (OAR).
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <bsp.h>
#include <bsp/bootcard.h>
/*
#include <mmu.h>
*/
#include <mpc8260.h>
#include <rtems/score/thread.h>
#include <rtems/powerpc/powerpc.h>
#include <rtems/bspIo.h>
#include <rtems/counter.h>
#include <bsp/irq.h>
#include <libcpu/cpuIdent.h>
#include <libcpu/spr.h>
#include <string.h>
#define UART1_E 0x02000002 /* bit 6 of BCSR1 */
#define UART2_E 0x01000001 /* bit 7 of BCSR1 */
#define GP0_LED 0x02000002 /* bit 6 of BCSR0 */
#define GP1_LED 0x01000001 /* bit 7 of BCSR0 */
SPR_RW(SPRG1)
/*
* Driver configuration parameters
*/
uint32_t bsp_clock_speed;
uint32_t bsp_time_base_frequency;
uint32_t bsp_clicks_per_usec;
uint32_t bsp_serial_per_sec; /* Serial clocks per second */
bool bsp_serial_external_clock;
bool bsp_serial_xon_xoff;
bool bsp_serial_cts_rts;
uint32_t bsp_serial_rate;
/* leave in case needed in future */
#if 0
static void _BSP_GPLED0_on(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr0 &= ~GP0_LED; /* Turn on GP0 LED */
}
#endif
static void _BSP_GPLED0_off(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr0 |= GP0_LED; /* Turn off GP0 LED */
}
/* leave in case needed in future */
#if 0
static void _BSP_GPLED1_on(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr0 &= ~GP1_LED; /* Turn on GP1 LED */
}
#endif
static void _BSP_GPLED1_off(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr0 |= GP1_LED; /* Turn off GP1 LED */
}
static void _BSP_Uart1_enable(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr1 &= ~UART1_E; /* Enable Uart1 */
}
static void _BSP_Uart2_enable(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr1 &= ~UART2_E; /* Enable Uart2 */
}
uint32_t _CPU_Counter_frequency(void)
{
return bsp_clock_speed;
}
void bsp_start(void)
{
/* Set MPC8260ADS board LEDS and Uart enable lines */
_BSP_GPLED0_off();
_BSP_GPLED1_off();
_BSP_Uart1_enable();
_BSP_Uart2_enable();
/*
* Get CPU identification dynamically. Note that the get_ppc_cpu_type()
* function stores the result in global variables so that it can be used
* later...
*/
get_ppc_cpu_type();
get_ppc_cpu_revision();
cpu_init();
/*
mmu_init();
*/
ppc_exc_initialize();
bsp_interrupt_initialize();
/*
mmu_init();
*/
/*
* Enable instruction and data caches. Do not force writethrough mode.
*/
#if BSP_INSTRUCTION_CACHE_ENABLED
rtems_cache_enable_instruction();
#endif
#if BSP_DATA_CACHE_ENABLED
rtems_cache_enable_data();
#endif
/*
* initialize the device driver parameters
*/
bsp_time_base_frequency = 10000000;
bsp_clicks_per_usec = 10; /* for 40MHz extclk */
bsp_serial_per_sec = 40000000;
bsp_serial_external_clock = 0;
bsp_serial_xon_xoff = 0;
bsp_serial_cts_rts = 0;
bsp_serial_rate = 9600;
bsp_clock_speed = 40000000;
#ifdef REV_0_2
/* set up some board specific registers */
m8260.siumcr &= 0xF3FFFFFF; /* set TBEN ** BUG FIX ** */
m8260.siumcr |= 0x08000000;
#endif
/* use BRG1 to generate 32kHz timebase */
/*
m8260.brgc1 = M8260_BRG_EN + (uint32_t)(((uint16_t)((40016384)/(32768)) - 1) << 1) + 0;
*/
#ifdef SHOW_MORE_INIT_SETTINGS
printk("Exit from bspstart\n");
#endif
}
|
