1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
|
/**
* @file
*
* @brief Driver for Exar XR17D15x Multiport UARTs
*
* This driver supports 2, 4 or 8 port Exar parts which are NS16550
* compatible.
*/
/*
* COPYRIGHT (c) 1989-2012.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#include <bsp.h>
#include <termios.h>
#include <stdio.h>
#include <stdlib.h>
#include <rtems/termiostypes.h>
#include <libchip/serial.h>
#include <libchip/ns16550.h>
#include <rtems/bspIo.h>
#include <rtems/pci.h>
#include <bsp/exar17d15x.h>
#include "../../shared/dev/serial/legacy-console.h"
#define MAX_BOARDS 4
/*
* This is the rate for the clock internal to the parts.
*/
#define EXAR_CLOCK_RATE (921600*16)
/*
* Supported PCI Ids
*/
#define PCI_VENDOR_ID_EXAR 0x13A8
#define PCI_VENDOR_ID_EXAR_XR17D158 0x0158
#define PCI_VENDOR_ID_EXAR_XR17D154 0x0154
#define PCI_VENDOR_ID_EXAR_XR17D152 0x0152
/*
* Structure to manage each instance found.
*/
typedef struct {
uint16_t vendor;
uint16_t device;
uint8_t ports;
} exar_parts_t;
static exar_parts_t Supported[] = {
{ PCI_VENDOR_ID_EXAR, PCI_VENDOR_ID_EXAR_XR17D158, 8 },
{ PCI_VENDOR_ID_EXAR, PCI_VENDOR_ID_EXAR_XR17D154, 4 },
{ PCI_VENDOR_ID_EXAR, PCI_VENDOR_ID_EXAR_XR17D152, 2 },
{ 0, 0, 0 }
};
/*
* Information saved from PCI scan
*/
typedef struct {
bool found;
uint32_t base;
uint8_t irq;
uint8_t bus;
uint8_t slot;
uint8_t ports;
} exar17d15x_conf_t;
/*
* Register Access Routines
*/
static uint8_t xr17d15x_get_register(uint32_t addr, uint8_t i)
{
uint8_t val = 0;
volatile uint8_t *reg = (volatile uint8_t *)(addr + i);
val = *reg;
// printk( "RD %p -> 0x%02x\n", reg, val );
return val;
}
static void xr17d15x_set_register(uint32_t addr, uint8_t i, uint8_t val)
{
volatile uint8_t *reg = (volatile uint8_t *)(addr + i);
// printk( "WR %p <- 0x%02x\n", reg, val );
*reg = val;
}
rtems_device_driver exar17d15x_initialize(
rtems_device_major_number major,
rtems_device_minor_number minor_arg,
void *arg
)
{
// int pbus, pdev, pfun;
exar17d15x_conf_t conf[MAX_BOARDS];
int boards = 0;
int b = 0;
int p;
console_tbl *ports;
console_tbl *port_p;
int pbus;
int pdev;
int pfun;
int status;
int instance;
int i;
int total_ports = 0;
for ( b=0 ; b<MAX_BOARDS ; b++ ) {
conf[b].found = false;
}
/*
* Scan for Serial port boards
*
* NOTE: There appear to be Exar parts with 2 and 4 ports which would
* be easy to support. Just change the hard-coded 8 ports per
* board to variable and adjust.
*
* NOTE: There are likely other board vendors which could be supported
* by this.
*/
for ( instance=0 ; instance < MAX_BOARDS ; instance++ ) {
for ( i=0 ; Supported[i].ports != 0 ; i++ ) {
status = pci_find_device(
Supported[i].vendor,
Supported[i].device,
instance,
&pbus,
&pdev,
&pfun
);
if ( status == PCIB_ERR_SUCCESS ) {
boards++;
conf[instance].found = true;
conf[instance].ports = Supported[i].ports;
total_ports += conf[instance].ports;
break;
}
}
if ( status != PCIB_ERR_SUCCESS )
continue;
pci_read_config_byte(
pbus,
pdev,
pfun,
PCI_INTERRUPT_LINE,
&conf[instance].irq
);
pci_read_config_dword(
pbus,
pdev,
pfun,
PCI_BASE_ADDRESS_0,
&conf[instance].base
);
printk(
"Found Exar 17D15x %d at 0x%08lx IRQ %d with %d ports\n",
instance,
conf[instance].base,
conf[instance].irq,
conf[instance].ports
);
}
/*
* Now allocate array of device structures and fill them in
*/
ports = calloc( total_ports, sizeof( console_tbl ) );
port_p = ports;
for ( b=0 ; b<MAX_BOARDS ; b++ ) {
if ( conf[b].found == false )
continue;
for ( p=0 ; p<conf[b].ports ; p++ ) {
char name[32];
sprintf( name, "/dev/exar17d15x_%d_%d", b, p );
//printk("Found %s\n", name );
port_p->sDeviceName = strdup( name );
port_p->deviceType = SERIAL_NS16550;
#if 1
port_p->pDeviceFns = &ns16550_fns_polled;
#else
port_p->pDeviceFns = &ns16550_fns;
#endif
port_p->deviceProbe = NULL;
port_p->pDeviceFlow = NULL;
port_p->ulMargin = 16;
port_p->ulHysteresis = 8;
port_p->pDeviceParams = (void *) 9600;
port_p->ulCtrlPort1 = conf[b].base + (p * 0x0200);
port_p->ulCtrlPort2 = 0; /* NA */
port_p->ulDataPort = 0; /* NA */
port_p->getRegister = xr17d15x_get_register;
port_p->setRegister = xr17d15x_set_register;
port_p->getData = NULL; /* NA */
port_p->setData = NULL; /* NA */
port_p->ulClock = EXAR_CLOCK_RATE;
port_p->ulIntVector = conf[b].irq;
port_p++;
} /* end ports */
} /* end boards */
/*
* Register the devices
*/
if ( boards )
console_register_devices( ports, total_ports );
return RTEMS_SUCCESSFUL;
}
|