| Commit message (Collapse) | Author | Age | Files | Lines |
| |
|
| |
|
|
|
|
| |
Update #4372
|
|
|
|
| |
Updates #4321
|
|
|
|
|
| |
Detects the SOC type using FDT and also replaces the ti_cpuid.h
header in FreeBSD with custom one.
|
| |
|
|
|
|
| |
Updates #4320
|
| |
|
|
|
|
|
|
| |
AArch64 on hardware is often started at EL2 instead of EL1 from either
u-boot or a first stage bootloader. This allows RTEMS to drop from EL2
execution to EL1 to operate as normal.
|
| |
|
|
|
|
| |
Update #4267.
|
|
|
|
| |
Use the Python sorted() function to sort the "source" lists.
|
| |
|
|
|
|
|
| |
Move the Freescale EDMA driver to it's own object and build it only for
the BSP that is currently using it.
|
|
|
|
|
|
|
|
| |
This allows an application to get the registers of the LPSPI. That is
usefull for applications that want to use DMA for a very specialized and
highly optimized communication.
Update #4180
|
|
|
|
|
|
|
|
|
|
| |
Note: The changes have been done with portability in mind. The driver
should (in theory) be able to replace the original one in the MPC BSPs
too. For full compatibility an adaption layer and especially a test
would be necessary. Because both are missing, don't integrate it into
the MPC BSP now.
Update #4180
|
|
|
|
|
|
|
| |
This allows applications to individually provide configuration
structures.
Update #4209.
|
|
|
|
|
|
|
| |
This allows applications to individually provide configuration
structures.
Update #4209.
|
|
|
|
|
|
|
|
| |
This BSP supports the Arm Fixed Virtual Platform. Only the Cortex-R52
processor configuration is supported by the BSP. It should be easy to
add support for other variants if needed.
Update #4202.
|
|
|
|
|
|
| |
This avoids a function call overhead in the interrupt dispatching.
Update #4202.
|
|
|
|
|
|
|
|
|
|
| |
Set the VBAR to the vector table in the start section before
bsp_start_hook_0() is called to earlier handle exceptions in RTEMS.
Set the VBAR to the normal vector table in start.S for the main
processor. Secondary processors set it in bsp_start_hook_0().
Update #4202.
|
|
|
|
|
|
|
| |
When moving the headers from the imx BSP to the shared area, the wrong
directory has been selected. This patch fixes that problem.
Update #4180
|
|
|
|
|
|
| |
This allows simpler creation of own dts files for custom boards.
Update #4180
|
| |
|
|
|
|
|
|
|
| |
- Disabled by default
- Enable using ARM_MMU_USE_SMALL_PAGES option
Close 4192.
|
|
|
|
|
|
| |
Clarify documentation.
Update #4202.
|
|
|
|
| |
Update #4202.
|
|
|
|
| |
Update #4202.
|
|
|
|
|
|
|
| |
Currently, zynq-uart code is always built and has some requirements for
BSPs that use it. Instead of making all BSPs satisfy that requirement or
working around it by setting defaults, this moves the zynq-uart code
into its own spec build object so it can be included if needed.
|
|
|
|
|
|
|
|
| |
This adds a BSP family that runs on the Xilinx Ultrascale+ MPSOC
(ZynqMP) family of chips. It is configured to be usable on the Qemu
ZCU102 machine definition and should be almost trivially portable to
ZynqMP development boards and custom hardware. It is also configured to
be usable with libbsd.
|
|
|
|
|
| |
This moves the ARM GICv2 driver to bsps/shared to be usable by AArch64
code.
|
|
|
|
|
| |
This moves the zynq-uart driver from bsps/arm/shared to bsps/shared to
accomodate use by AArch64 BSPs.
|
|
|
|
| |
Update #4180
|
|
|
|
|
|
|
| |
Modify the MPU functions of the stm32h7 BSP to be table based and
available for all ARMV7M BSPs.
Update #4180
|
|
|
|
| |
Update #4180
|
|
|
|
| |
Update #4180
|
| |
|
|
|
|
| |
Update #3910.
|
| |
|
| |
|
| |
|
| |
|
|
|
|
|
| |
This breaks out AArch32-specific code so that the shared GICv3 code can
be reused by other architectures.
|
|
|
|
|
|
| |
This breaks AArch32-specific portions of the ARM GPT driver into their
own file so that the generic code can be moved for reuse by other
architectures.
|
|
|
|
| |
This UART driver is now needed for BSPs other than ARM.
|
|
|
|
| |
Close #4121.
|
|
Update #3818.
|