| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
| |
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* 3c509/Makefile.am: Dito.
* console/Makefile.am: Dito.
* include/bsp.h: Include bspopts.h.
|
|
|
|
|
| |
* console/vt.c: Added include of <rtems.h> so _CPU_ISR_disable
would be visible.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* console/inch.c, console/keyboard.c, console/pc_keyb.c,
console/vt.c, include/bsp.h: Correct incorrect interrupt level
handling in new keyboard management code. Correct
BSP_poll_char initialization routine.
* start/start.S, startup/bspstart.c: Correct when the video is
initialized.
* timer/timer.c (Calibrate_1ms_loop): Address problem where this
did not work correctly on all PC speeds. The new calibrate routine
has been tested on Pentium 166, pentium II 200, pentium III
300 Mhz and does work as expected.
|
|
|
|
|
| |
* pc386/console/console.c, pc386/console/serial_mouse.c,
pc386/console/vgainit.c, shared/comm/tty_drv.c: Remove warnings.
|
|
|
|
| |
* console/serial_mouse.c: Fixed typos introduced by removal of CR/LF.
|
|
|
|
| |
* console/serial_mouse.c: Added support for changing serial parameters.
|
|
|
|
|
|
| |
* console/console.c, console/serial_mouse.c, include/bsp.h:
Add the ability to set parity, number of data bits and
number of stop bits to the existing i386 serial drivers.
|
|
|
|
|
|
|
| |
* 3c509/Makefile.am, clock/Makefile.am, console/Makefile.am,
ne2000/Makefile.am, start/Makefile.am, startup/Makefile.am,
timer/Makefile.am, wd8003/Makefile.am, wrapup/Makefile.am: Include
compile.am
|
|
|
|
|
| |
* console/keyboard.h: Changed numerous routines from extern inline
to static inline.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Major rework of the "/dev/console" driver.
* Added termios support for stdin ( keyboard ).
* Added ioctls() to support modes similar to Linux( XLATE,
RAW, MEDIUMRAW ).
* Added Keyboard mapping and handling of the keyboard's leds.
* Added Micro FrameBuffer driver ( "/dev/fb0" ) for bare VGA
controller ( 16 colors ).
* Added PS/2 and Serial mouse support for PC386 BSP.
* console/defkeymap.c: New file.
* console/fb_vga.c: New file.
* console/fb_vga.h: New file.
* console/i386kbd.h: New file.
* console/kd.h: New file.
* console/keyboard.c: New file.
* console/keyboard.h: New file.
* console/mouse_parser.c: New file.
* console/mouse_parser.h: New file.
* console/pc_keyb.c: New file.
* console/ps2_drv.h: New file.
* console/ps2_mouse.c: New file.
* console/ps2_mouse.h: New file.
* console/serial_mouse.c: New file.
* console/serial_mouse.h: New file.
* console/vgainit.c: New file.
* console/vt.c: New file.
* console/Makefile.am: Reflect new files.
* console/console.c, console/inch.c, console/outch.c: Console
functionality modifications.
* startup/Makefile.am: Pick up tty_drv.c and gdb_glue.c
|
|
|
|
| |
location in libc.
|
| |
|
|
|
|
| |
adds .cvsignore.
|
|
|
|
|
|
|
|
|
|
| |
Ralf Corsepius <corsepiu@faw.uni-ulm.de> that contain:
* Modifications, (minor) corrections, cleanups to most existing
Makefile.ams
* Adds automake support to all remaining BSPs which have not yet been
converted to automake.
* Makefile.am for all remaining wrapup/Makefile.ams
|
|
|
|
| |
that converts the libbsp/i386 subdirectory to full automake.
|
|
|
|
|
|
|
|
| |
that converts the i386 directory to automake.
NOTE: Ralf is unable to build any i386 BSPs. This was true before and
after this patch and appears (to Joel) to be a tool issue unrelated since
others can build i386 BSPs.
|
| |
|
| |
|
|
|
|
|
| |
to convert the libc directory to automake and "dozens of
small fixes for Makefile.ins/configure.ins below c/src/lib."
|
| |
|
|
|
|
|
|
| |
increase ease of application configuration of the pc386 BSP. This
patch allows switching the printk console to a serial port and
overriding bsp_start by making it a weak alias.
|
|
|
|
|
| |
Ralf Corsepius <corsepiu@faw.uni-ulm.de> which converted many
Makefile.in's to Makefile.am's. This added a lot of files.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A bug in acpolish made it into rtems-rc-19990709-0.diff, which
unfortunately affects all Makefile.ins:
* The maintainer mode conditional was erroniously applied to the
dependencies of "Makefile".
In case you already checked in rtems-rc-19990709-0.diff to CVS you have
to check in all Makefile.ins again after applying the patch below :).
Please apply the patch below as follows:
patch -p1 < rtems-rc-19990709-1.diff
tools/update/rtems-polish.sh -ac
Note: There is no need to rerun your tests if you have used
--enable-maintainer-mode to configure RTEMS, because this patch converts
all Makefile.ins to the same settings as used for
--enable-maintainer-mode.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
to move RTEMS more to automake/autoconf and GNU compliance.
Finally, here they are: the "big-patch" patches - merged into one big
patch (~1.5MB).
Sorry for the delay, but testing took much more time than I had expected
- esp. reworking the acpolish script triggered many more tiny issues
than I had expected (cf. below).
At least, now you've got something to spend your weekend with :-.
WARNINGS:
* I've gone a little (??) further than I had announced before.
* Several directories have been moved.
* Several files have been added and removed
* I have tested it with many BSPs/CPUs and a variety of permutiations of
configuration flags, but not with all.
* Most parts of the patch are automatically generated, however there are
many tiny manual modifications.
APPLYING THE PATCH:
./autogen -c
mkdir tools
mv c/src/exec/score/tools tools/cpu
mv c/build-tools tools/build
mv c/update-tools tools/update
patch -p1 -E < rtems-rc-19990709-0.diff
./autogen
If the patch doesn't apply to rtems-cvs, I would suggest that you should
try to apply it brute-force and then to run tools/update/rtems-polish.sh
-ac -am afterwards. A recursive diff between rtems-19990709 + patch and
rtems-cvs + patch then should report only a few dozen significant
changes to configuration files which need to be merged manually (IIRC, I
did not change any source files).
*** Attention: There are files to be removed, moved, copied and added
in/to CVS!
NEWS/CHANGES:
1. Configuration takes place in 3 stages: 1. per host (toplevel
configure script), 2. per target (c/configure), 3. per bsp
c/src/configure automatically triggered from ./configure and
c/Makefile.am.
2. Building of subdirectory c/ takes place in c/$(target_alias) for
cross-targets in c/ for native targets
3. Building of subdirectory c/src takes place in c/${target_alias}/<bsp>
for cross-targets, c/<bsp> for native targets
4. c/build-tools moved to tools/build
5. c/src/exec/score/cpu/tools moved to tools/cpu (=cpu-tools split out)
6. c/update-tools moved to tools/update
7. New subdirectory c/src/make, handles files from make/ on a per BSP
basis
8. Maintainer mode support: Ie. if configuring with
--enable-maintainer-mode disabled (the default), then tracking of many
dependencies will be disabled in Makefiles. Esp. many dependencies for
auto* generated files will be switched off in Makefiles. Ie. if not
using "--enable-maintainer-mode" many auto* generated files will not be
updated automatically, i.e. normal users should not be required to have
auto* tools anymore (untested).
9. Independent configuration scripts for / (toplevel), tools/build,
tools/cpu, tools/update, c/, c/src/, c/src/exec, c/src/lib, c/src/tests,
c/src/make
10. Automake support for all directories above and besides c/src
11. "preinstall" now is implemented as depth-first recursive make target
12. host compiled tools (exception bsp-tools) are accessed in location
in the build tree instead of inside the build-tree when building RTEMS.
13. RTEMS_ROOT and PROJECT_ROOT now point to directories inside the
build-tree - many tiny changes as consequence from this.
14. --with-cross-host support removed (offically announced obsolete by
cygnus)
15. Changing the order of building libraries below c/src/lib/
16. Former toplevel configure script broken into aclocal/*.m4 macros
17. Newlib now detected by configure macros, RTEMS_HAS_NEWLIB removed
from *cfg.
18. sptables.h now generated by autoconf
19. Rules for "mkinstalldirs temporary installation tree" moved from
c/Makefile to subdirectories.
20. Cpu-tools do not get installed.
21. FIX: Use ACLOCAL_AMFLAGS instead of ACLOCAL = -I ... in Makefile.ams
which are in directories with own configure scripts.
22. Hardcoding BSP names into libbsp/.../tools to avoid RTEMS_BSP get
overridden from the environment.
22. FIX: Handling of MP_PIECES in various Makefiles
23. FIX: Removing "::" rules from some Makefile.ins
24. FIX: File permission chaos: (-m 444 and -m 555 vs. -m 644 and -m
755) - Now all include files use -m 644.
25. Removed many gnumake-conditionals in Makefile.ins - Partially
replaced with automake-conditional, partially replaced with
conditionalized Makefile variables (... _yes_V)
26. Massively reworked acpolish: acpolish now parses Makefile.ins and
interprets parts of the Makefile.ins.
27. FIX: Some $(wildcard $(srcdir)/*.h) macros removed / replaced with
explicit lists of files in Makefile.ins.
28. FIX: Replacing MKLIB with RANLIB in Makefile.ins
29. HACK: Add preinstallation for pc386 specific
$(PROJECT_RELEASE)/BootImgs directory
... many more details, I can't recall
KNOWN BUGS:
1. make [debug|profile]_install do not do what they are promissing.
"make [debug|profile] install" does what "make [debug|profile]_install"
has been doing. Proposal: remove [debug|profile]_install
2. Dependencies between temporary installation tree and source tree are
not yet handled correctly.
3. Dependencies between temporary installation tree and source tree are
handled ineffencently (Using INSTALL_CHANGE instead of make
dependencies)
4. RTEMS_ROOT, PROJECT_ROOT, top_builddir, RTEMS_TOPdir now are
redundant.
5. The new configure scripts still are in their infancy. They contain
redundant checks and might still contain bugs, too.
6. RTEMS autoconf Makefile.ins use a mixture of configuration
information gathered in c/$(target_alias)/<bsp>/make and of information
collected from their configure scripts.
7. make dist is not fully functional
8. Subdirectory host-/build-/target- configure options (--target,
--host, --build) do not conform to Cygnus/GNU conventions.
9. Some RTEMS autoconf Makefile.in's makefile targets are not supported
in automake Makefile.ams/ins (e.g. get, clobber).
10. Some automake standard targets are not propagated from toplevel and
c/Makefile.am to autoconf subdirectories (eg. make dist).
11. rpcgen generated files are not part of the source-tree (Automake
conventions favor supplying generated files inside the source-tree,
however there is no support for rpcgen generated files in automake, cf.
yacc/lex support in automake).
12. RTEMS_HAS_RDBG handling is flaky. make/*.cfg use RTEMS_HAS_RDBG per
CPU, while librdb's sources can only be built per BSP. Raises the more
general question whether librdbg located correctly in the source-tree.
13. All make/*cfg files are configured per cpu, currently there is no
location to store per-bsp configuration information --> bsp.cfg, per
aconfig.h?
14. "make install" without having run "make all" beforehand does not
work.
15. handling of --enable-multiprocessing seems to be broken in
make/custom/*
16. Makefile.ins still exploit many gmake features.
17. File permisson chaos on libraries (no explict -m for
libraries/rels/etc).
18. mcp750 Makefiles are broken (Note: I *do* mean buggy - I am not
talking about "not-conforming to conventions", here :-).
19. Dependencies between configure scripts are not handled, eg. aborting
"make RTEMS_BSP=<bsp>" can leave the build-tree in an unusable state.
20. "make clean" does not delete <build-tree>/<bsp>. This is intentional
for now, because rerunning "make" after "make clean" requires an
explicit "make preinstall" afterwards now. This should be done
automatically, but doesn't work in this case for now. To work around
this problem <build-tree>/<bsp> is kept during "make clean" for now
(HACK).
TODO:
1. split out host-compiled bsp-tools
2. Use Cygnus/GNU standards for cross-compiling target-subdir
(CC=CC_FOR_TARGET .. configure --host=${target_alias}
--build=`config.guess'}), to be added to toplevel configure script after
splitting out bsp-tools.
3. Exploit per cpu support directory (c/src/<cpu>)- Splitting out
per-cpu libraries - Are there any?
4. Further automake support
5. Converting subdirectories into standalone / self-contained
subdirectories (Esp. moving their headers to the same common root as
their sources, eg. mv lib/include/rtems++
lib/librtems++/include/rtems++) - This is the main obstacle which
prevents moving further towards automake.
6. Propagating values from *.cfg into Makefiles instead of propagating
them at make time via Makefile-fragments (i.e. try to avoid using
*.cfg).
7. Testing on cygwin host (I *do* expect cygwin specific problems).
8. The ARCH in o-$(ARCH)-$(VARIANT) build-subdirectories is not needed
anymore.
GENERAL ISSUES:
1. Temporary installation tree -- Ian and I seem to disagree basically.
Though I think that I understand his argumentation, I do not share it.
IMO, his way of using the buildtree is mis-using the build-tree, relying
on an inofficial feature of RTEMS's current implementation, which
doesn't even work correctly in the current build-tree, though it
attempts hard to do so. From my very POV, it unnecessarily complicates
the structures of the source- and build-trees. It is not supported by
automake (No automatic generation for the necessary rules) and
complicates the transition to automake significantly (Generating the
rules with an enhanced version of acpolish could be possible).
As Ian correctly pointed out, here a management decision is needed -
though I don't see the need to draw this decision in short terms.
2. preinstallation generally is a sure means to spoil the structure of
the source tree, IMHO (No ranting intended, I am completly serious about
this one). eg. through tree dependencies. The worst problem related to
this I have found in the meantime is bsp_specs. bsp_specs is part of
libbsp, ie. there is *no* way to build *any* part of the source tree
*without* having a BSP *preinstalled*.
Note: This issue is related to issue 1., but is not identical - The
difference is the change of the order make rules have to be triggered.
While preinstallation triggers rules spread all over the source tree
before a "make all" can be run, a temporary installation tree could also
be installed by post "make all" hooks (all-local:, to be run after make
all in a directory is completed) if the directories' dependencies would
be a tree,
3. Stuctural dependencies between subdirectories.
4. Depth of the source tree (Prevents multilibbing and introduces many
unnecessary configure scripts).
5. per cpu vs. per bsp configuration (There are no real per-cpu parts
yets :-).
6. automake does not support $makefiles in AC_OUTPUT. Unlike before, we
now should try to avoid RTEMS_CHECK_MAKEFILE and to hard-code as much
paths to Makefiles as possible.
7. General redesign of the source tree
8. Main installation point - Changing it to ${prefix}/${target_alias}. ?
Besides item 8. (which is a must, IMHO), as far as I see most of them
can not be solved soon and will remain issues in the mid- to long-term
:-.
REMARKS:
* You (as the maintainer) should always use --enable-maintainer-mode
when building RTEMS to ensure that maintainer mode generated files (esp.
those in c/src/make) will be updated when make/* files have changed.
* Use @RTEMS_BSP@ in Makefile.ins and Makefile.ams below c/src/,
$(RTEMS_BSP) or ${RTEMS_BSP} will be overridden from environment
variables when using make RTEMS_BSP="....".
* c/src/make is a temporary cludge until configuration issues are
solved. At the moment it is configured per bsp, but contains
per-target/cpu info only. Its main purpose now is to circumvent
modifying make/*.cfg files, because I consider make/* to be frozen for
backward compatibilty.
* This patch should only affect configuration files. At least I do not
remember having touched any source files.
* To build the bare bsp you now need to mention it in --enable-rtemsbsp.
Example: building gensh1 and sh1/bare simultaneously:
../rtems-rc-19990709-1/configure --target=sh-rtems \
--enable-rtemsbsp="bare gensh1" \
--prefix=/tmp/rtems \
--enable-bare-cpu-cflags='-DMHZ=20 -m1
-DCPU_CONSOLE_DEVNAME=\"/dev/null\"' \
--enable-bare-cpu-model=sh7032 \
--enable-maintainer-mode \
--enable-cxx
make
make install
* The next steps in development would be to split out bsp-tools and then
to change to Cygnus/GNU canonicalization conventions for building the c/
subdirectory afterwards (i.e. many standard AC_*.m4 macros could be used
instead of customized versions)
FINAL REMARK:
The issues mentioned in the lists above sound much worser than the
situation actually is. Most of them are not specific to this patch, but
are also valid for the snapshot. I just wrote down what I came across
when working on the patch over the last few weeks.
I wouldn't be too surprised if you don't like the patch at the current
point in development. I am willing to discuss details and problems, I
also have no problem if you would post-pone applying this patch to times
after 4.1, but rejecting it as a whole for all times would be a false
management decision, IMHO.
Therefore I would suggest that you, if your time constaints allow it,
should at least play a little while with this patch to understand what
is going on and before drawing a decision on how to handle this
proposal. I know this patch is neither perfect nor complete, but I
consider it to be a major breakthrough. Don't be anxious because of the
size of the patch, the core of the patch is rather small, the size is
mainly the side effect of some systematic cleanups inside the Makefiles
(result of acpolish).
Feel free to ask if you encounter problems, if you don't understand
something or if you meet bugs - I am far from being perfect and am
prepared to answer them.
Ralf.
--
Ralf Corsepius
Forschungsinstitut fuer Anwendungsorientierte Wissensverarbeitung (FAW)
Helmholtzstr. 16, 89081 Ulm, Germany Tel: +49/731/501-8690
mailto:corsepiu@faw.uni-ulm.de FAX: +49/731/501-999
http://www.faw.uni-ulm.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This one is an enhancement to acpolish.
It replaces some Makefile variables by others variable in Makefile.ins
(tries to use unique name for some variables). It therefore eases
parsing Makefile.ins for further automatic Makefile.in conversions in
future.
To apply:
cd <rtems-source-tree>
sh <path-to>/rtems-rc-19990407-8.sh
./autogen
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is the most scary of all proposals I've been mailing to you
this week until now.
It consists of 3 parts:
1. a patch
2. a perl script (acpolish)
3. a shell script wrapper to invoke the perl-script.
The perl-script reads in each Makefile.in and modifies them
("polishes/beautifies" them :-).
These modifications are not easy to describe:
Basically, it hard-codes some automake Makefile-variables and rules into
RTEMS autoconf-Makefile.ins (Note: autoconf vs. automake!!) and converts
some settings/variables to configure scripts' requirements (Yes,
plural).
E.g. it adds the automake standard variables $top_builddir and $subdir,
adds dependency rules for automatic re-generation of Makefiles from
Makefile.in, adds support variables for relative paths to multiple
configure scripts etc.
The patch is a one-line patch to enable the support of the new features
added by acpolish.
The shell script is a wrapper which pokes around inside of the source
tree for Makefile.ins and invokes acpolish on all autoconf-Makefile.ins.
acpolish is designed to be able to run several times on the same
Makefile.in and may once become a more general tool to convert RTEMS
Makefile.in to automake. Therefore, I'd like to keep it inside of source
tree. (e.g. as contrib/acpolish or c/update-tools/acpolish). However, it
doesn't make sense to export it outside of RTEMS.
To apply this:
cd <source-tree>
patch -p1 -E < <path-to-patch>/rtems-rc-19990318-1.diff
tar xzvf <path-to>/rtems-rc-polish.tar.gz
./rtems-polish.sh
./autogen
Note: The path contrib/acpolish is hard-coded into rtems-polish.sh, if
you decide to put it in an alternative place, please modify
rtems-polish.sh to reflect this change.
Later:
cvs rm make/rtems.cfg (It isn't used anymore)
cvs add contrib
cvs add contrib/acpolish
cvs commit
I've tested this intensively, but naturally I can't exclude bugs.
Ralf.
PS.: Most probably, this is the last "Towards automake" patch. The next
one probably will be a real automake patch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
> 5) rtems-rc-19990202-1.diff/reorg-install.sh
>
> reorg-install.sh fixes a Makefile variable name clash of RTEMS
> configuration files and automake/autoconf standards.
> Until now, RTEMS used $(INSTALL) for install-if-change. Automake and
> autoconf use $(INSTALL) for a bsd-compatible install. As
> install-if-change and bsd-install are not compatible, I renamed all
> references to install-if-changed to $(INSTALL_CHANGED) and used
> $(INSTALL) for bsd-install (==automake/autoconf standard). When
> automake will be introduced install-if-change will probably be replaced
> by $(INSTALL) and therefore will slowly vanish. For the moment, this
> patch fixes a very nasty problem which prevents adding any automake file
> until now (There are still more).
|
| |
|
|
|
|
|
| |
.s files to .S in conformance with GNU conventions. This is a
minor step along the way to supporting automake.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
moves pieces of the pc386 bsp up to a shared level for all i386 BSPs
and modifies the i386ex BSP to use those shared pieces. Serial remote
debugging is included for both targets. Erik's notes:
There are several workarounds in it:
1) #define NEXT_GAS is hardcoded in pc386/start/start.s
2) #define NEXT_GAS is hardcoded in i386ex/start/start.s
3) #define NEW_GAS is hardcoded in pc386/start16.s
4) #undef __assert and redeclare _assert hardcoded in console.c for
both pc386 and i386ex due to my egcs1.1b ~ newlib problem. Should have
modified t-rtems.cfg ( no time )
I've tested pc386 with both video and serial consoles and GDB remote.
All work fine, except that GDB acts weird. ( re: other posting)
I hope this will work for you. It took quite some time to locate the
autoconf error. The remainder was just grunt work.
Unfortunately, I think I've unwound the removal of the IBMPCInitVideo
stuff. Sorry. I REALLY can't spend more time... I've been at this
conversion to 4.0 locally and updating the release since Sept. 8th, and
have yet to compile my network driver.... This is as much as I can do
right now.
I look forward to the next patch to really test i368ex. I did make sure
that the sample tests worked for pc386.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
1. Finally fixes raw interrupts for pc386
2. Makes some minor cleanup in console and startup
3. Makes rtems_termios_dequeue_characters() to return count of
outstanding chars - it allows to simplify console isrs a little
bit.
4. pc386 uart modified to be friendlier to termios parameter changes,
to have minor performance improvement and to take advantage of
of above termios modification.
|
|
|
|
|
| |
Compiled and booted without problem. However console was set on COM2.
At least for 4.0 it should be video :-)
|
|
|
|
|
|
|
|
|
|
|
|
| |
in a previous patch. Comments from Eric:
patch_com2 was before your own fixes of raw IDT vector management
routine.
It mainly use human readable constants for the serial line driver code
+ the patch you gave me for com2 write routine.
I applied your patch for raw IDT mngt on top of that. Then made minor
cleaning in patch_idt_mngt. I hope this helps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Eric> NB : there is still a bug on PC386 serial line : exit does not
Eric> flush the remaining output queue. As this is not a bug in the
Eric> driver itself but somewhere in PC386 initialization/termios
Eric> relationship it will be part of another patch.
Eric> NB2 : As Emmanuel excerced the exception hanlder code, while
Eric> porting the SMC driver to the new BSD stack, we found a bug
Eric> in the exception handler : it shall not delete the current
Eric> thread in case we are running at interrupt level. This will
Eric> be part of another patch...
So here is the patch. This patch fixes the two problems mentionned above
+ it use vpath mechanism intead of copying the irq related files in
the right directory. This avoid to compile them each time and is
more homogenous with other Makefiles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Here is a brief description of the attached patch :
1) There was a bug in the code for the COM2 serial line driver. Aleksey
gave me a fix that fixes the driver code itself. I would like to thank
him again publicly,
2) I introduced constants in the serial driver code because I had a hard
time reading the meanning of hexadecimal values in the NS data book :)
3)You can now mix printk and printf on serial line (tested on COM2).
There is a #ifdef PRINTK_ON_SERIAL in console.c that enables to have
printk on console while printf on serial line,
4) Removed call to displayCpuInfo because anyway if was at the wrong
place for serial line console (too early). It can anyway be called at
application level,
5) The original printk was unable to display negative integer values
and was also recursive. It now works corectly,
All the modifications have been tested here on the COM2 port from
a PC running RTEMS to a PC running linux,
NB : there is still a bug on PC386 serial line : exit does not flush the
remaining output queue. As this is not a bug in the driver itself but
somewhere in PC386 initialization/termios relationship it will be part
of another patch.
NB2 : As Emmanuel excerced the exception hanlder code, while porting the
SMC driver to the new BSD stack, we found a bug in the exception
handler : it shall not delete the current thread in case we are running
at interrupt level. This will be part of another patch...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Celso Labinaz <labinaz@tin.it> pointed to me thatthe console on serial
line was not working. After spending quite a time to find the right
cable and software, I confirm this.
I'm going to debug this in the next days because I want to use the
serial line for debugging. In the meantime, in order to be sure that
this was a driver initialization/bug, I made printk work on the serial
line in order to be sure the receiver part and configuration was OK.
Here is the for printk on serial line. BTW, does anyone else use the
serial line facilities for PC? printf seems to output nothing (hello.exe
output everything that has a printk but application printf seems to be
broken).
|
|
|
|
|
|
| |
It fixes netboot build problem, KA9Q configuration
for pc386, some compiler wardning, it also removed some stuff
ifdef'ed with '#if 0'.
|
|
|
|
| |
inline with the new IRQ structure.
|
|
|
|
| |
Enabled on the pc386.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Here is a enhanced version of my previous patch. This patch enables
to potentially share the new interrupt management code for all Intel targets
(pc386, go32 and force386) bsp.
Note : this patch is complete only for pc386. It still needs to
be completed for go32 and force386. I carrefully checked
that anything needed is in for force386 (only some function
name changes for IDT manipulation and GDT segment
manipulation). But anyway I will not be able to test any
of theses targets...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
c/src/lib/libbsp/i386/pc386/console/console.c
__assert() modified so it prints on selected console instead of
PC console
c/src/lib/libbsp/i386/pc386/console/inch.c
inch_sleep() modified, so it does not depend upon tmacros.h
c/src/lib/libbsp/i386/pc386/pc386dev/GDB.HOWTO
description updated
c/src/lib/libbsp/i386/pc386/startup/exit.c
last output before call to exit() will be printed properly on
serial console
c/src/lib/libbsp/i386/pc386/startup/irq.c
re-submitted bug fix for problem in irqs over 7.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
<qqi@world.std.com>). Unfortunately after merging these,
the pc386 will not boot using grub for for. It still does not
work using netboot for me. Here is his summary of changes:
rtems/c/src/lib/libbsp/i386/pc386/Makefile.in
Added support for new sub-directory
rtems/c/src/lib/libbsp/i386/pc386/bsp_specs
Made possible to build COFF image
rtems/c/src/lib/libbsp/i386/pc386/console/console.c
Added support for serial consoles, selectable by patching
binary image, added __assert(), use _IBMPC_inch_sleep()
instaed of _IMBPC_inch()
rtems/c/src/lib/libbsp/i386/pc386/console/inch.c
Added _IMBPC_inch_sleep()
rtems/c/src/lib/libbsp/i386/pc386/console/outch.c
Oops - just formatting
rtems/c/src/lib/libbsp/i386/pc386/include/Makefile.in
Added support for new files
rtems/c/src/lib/libbsp/i386/pc386/include/bsp.h
Added support for new features
rtems/c/src/lib/libbsp/i386/pc386/include/pc386uart.h
New file: definitions for serial ports
rtems/c/src/lib/libbsp/i386/pc386/include/pcibios.h
New file: definitions for PCI BIOS
rtems/c/src/lib/libbsp/i386/pc386/pc386dev/Makefile.in
New file: makefile in new directory
rtems/c/src/lib/libbsp/i386/pc386/pc386dev/i386-stub-glue.c
New file: i386-stub interface
rtems/c/src/lib/libbsp/i386/pc386/pc386dev/i386-stub.c
New file: i386-stub itself
rtems/c/src/lib/libbsp/i386/pc386/pc386dev/pc386uart.c
New file: serial ports
rtems/c/src/lib/libbsp/i386/pc386/pc386dev/pcibios.c
New file: PCI BIOS support
rtems/c/src/lib/libbsp/i386/pc386/start/start.s
Commented out DEBUG_EARLY stuff, everything is working fine
rtems/c/src/lib/libbsp/i386/pc386/start/start16.s
Cleaned up
rtems/c/src/lib/libbsp/i386/pc386/startup/bspstart.c
Added call to console_resereve_resources
rtems/c/src/lib/libbsp/i386/pc386/startup/exit.c
Added support for serial console
rtems/c/src/lib/libbsp/i386/pc386/startup/ldsegs.s
Fixed typo in comments
rtems/c/src/lib/libbsp/i386/pc386/tools/Makefile.in
Changed to reflect cnages in code
rtems/c/src/lib/libbsp/i386/pc386/tools/bin2boot.c
Trivialized, problem - I do not know how to make patch
remove obsolete files - there are a lot of them there
rtems/c/src/lib/libbsp/i386/pc386/tools/binpatch.c
New file: utility to do binary patches
rtems/c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in
Added support for new directory
rtems/make/custom/pc386.cfg
Add COFF image building
|
| |
|
|
|
|
| |
necessary because a patch did not apply cleanly.
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The breakdown:
* CC_FOR_TARGET and CXX_FOR_TARGET were not correctly re-read
from autoconf's configuration cache (config.cache)
* If <target>-[gcc|g++] was not found while running configure,
the config macros tried to use other (wrong) compilers (e.g. cc).
Changes:
* New RTEMS_PROG_CC macro (aclocal/prog-cc.m4).
* New RTEMS_PROG_CXX macro (aclocal/prog-cxx.m4)
* Moved a shell script fragment from configure.in to a
new m4-autoconf macro (New file: aclocal/tool-prefix.m4)
* Minor changes to configure.in
I tested it with linux/posix (native gcc/primary libc) and
sh-rtems/gensh1 on a linux host and didn't notice any bugs
related to the problems mentioned above. There seem to be
more bugs with the posix bsp, but I consider them minor as
the build run completed successfully. It is just too late
for me to attempt to fix them now.
|
| |
|
| |
|