| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
| |
With my most recent automake patch (automake II) we could even simplify more
files below make/, because the host-compiler related parts of those files
aren't used anymore :-.
Whatsoever, the patch below should fix this problem.
Note: This is a mere bug fix, it doesn't move any of the variables involved
to target.cfg nor does it try to eliminate any variable.
|
|
|
|
| |
interface naming convention.
|
| |
|
|
|
|
| |
parsing of interface names.
|
|
|
|
| |
by Jiri Gaisler <jgais@ws.estec.esa.nl>.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
fix some problems encountered when reusing this driver on
a SPARC ERC32 based Tharsys board. He eliminted the need
for TX interrupts and added code that can optionally ensure that
the IP address is 32-bit aligned. He also fixed a handful of
problems that only occured because the 8 Mhz ERC32 was
enough slower than the 100 Mhz PPC603e that timing
issues in this driver were magnified.
|
|
|
|
|
| |
network interface names. This change does not introduce any
compatibility problems.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
description follows:
Description:
* automake for *all* tool subdirectories (Makefile.am, configure.in etc.)
* autogen now also considers CONFIG_HEADER (generates stamp-h.ins and
config.h.ins)
* c/src/tests/tools/generic/difftest and
c/src/tests/tools/generic/sorttimes generated by configure scripts
* c/update-tools/ampolish, beautifier for Makefile.ams, similar to
acpolish
* rtems-polish.sh added to c/update-tools/ + ampolish support
* New subdirectory ./automake, contains automake -Makefile fragments to
support RTEMS make "debug, debug_install, profile, profile_install" for
native Makefile.ams (== ignore these make targets).
* aclocal/rtems-top.m4's RTEMS_TOP now reads the automake makefile
variable VERSION from RTEMS ./VERSION file.
* ./configure.in uses the macros from aclocal + support for the tools'
configure scripts
Remarks:
* To run rtems-polish.sh, "cd <rtems-source-tree>;
./c/update-tools/rtems-polish.sh"
* AFAIS, now all native subdirectories are converted to automake (Please
drop me a note, if I forgot something).
* Unless you notice something fatal, IMO the time has come for a public
try (== snapshot). I do not intend to send more automake related patches
within, say 2 weeks, to give these patches time to settle and to give me
some time to think on how to continue.
* The patch assumes installation to the new main installation directory
[$(prefix)].
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is the first real automake patch.
It adds automake support to c/build-tools and cleans up a few minor
issues.
I consider this to be a testing probe to examine problems with automake.
Therefore, this patch is just a more or less harmless replacement of the
former RTEMS Makefiles and I expect it not last for long. If you want to
give automake Makefiles a public try and if you want/need to learn about
problems with it, then it's about time for a new snapshot, IMO. I may
have screwed up something not directly related to automake, but I expect
very few (none to be precise) problems with automake. However, somebody
should at least try building on Cygwin. If you feel a bit more
adventureous, then I also can continue to submit more patches.
[FYI: I still have a couple of automake files laying around, but they
need some cleanup before being submitted as patches. Now, that I am just
into it, I'll perhaps submit another one tonight :-]
After applying this patch (patch -p1 -E <
<path-to>/rtems-rc-19990318-0), first run the "autogen" script from the
toplevel source directory, before committing to CVS. Be careful about
dependencies between Makefile.am and Makefile.ins when cutting tarballs
from CVS. Makefile.ins are required to be newer than Makefile.ams,
otherwise users would need to have automake, autoconf and perl. Some
people recommend to "touch" all Makefile.in after checkout from cvs (cf.
egcs/contrib/egcs_update).
ATTENTION:
* This patch adds a number of new files.
* remove aclocal/exeext.m4 and aclocal/cygwin.m4 from CVS, They are now
covered by autoconf-2.13`s AC_EXEEXT.
Some features/side-effects which are probably interesting for you:
In a configured build-tree "cd c/build-tools", then try
* "make RTEMS_BSP=<bsp> install"
* "make RTEMS_BSP=<bsp> dist"
|
|
|
|
|
| |
2 lines of code that did not get included when Joel tried to manually
add a rejected patch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is the most scary of all proposals I've been mailing to you
this week until now.
It consists of 3 parts:
1. a patch
2. a perl script (acpolish)
3. a shell script wrapper to invoke the perl-script.
The perl-script reads in each Makefile.in and modifies them
("polishes/beautifies" them :-).
These modifications are not easy to describe:
Basically, it hard-codes some automake Makefile-variables and rules into
RTEMS autoconf-Makefile.ins (Note: autoconf vs. automake!!) and converts
some settings/variables to configure scripts' requirements (Yes,
plural).
E.g. it adds the automake standard variables $top_builddir and $subdir,
adds dependency rules for automatic re-generation of Makefiles from
Makefile.in, adds support variables for relative paths to multiple
configure scripts etc.
The patch is a one-line patch to enable the support of the new features
added by acpolish.
The shell script is a wrapper which pokes around inside of the source
tree for Makefile.ins and invokes acpolish on all autoconf-Makefile.ins.
acpolish is designed to be able to run several times on the same
Makefile.in and may once become a more general tool to convert RTEMS
Makefile.in to automake. Therefore, I'd like to keep it inside of source
tree. (e.g. as contrib/acpolish or c/update-tools/acpolish). However, it
doesn't make sense to export it outside of RTEMS.
To apply this:
cd <source-tree>
patch -p1 -E < <path-to-patch>/rtems-rc-19990318-1.diff
tar xzvf <path-to>/rtems-rc-polish.tar.gz
./rtems-polish.sh
./autogen
Note: The path contrib/acpolish is hard-coded into rtems-polish.sh, if
you decide to put it in an alternative place, please modify
rtems-polish.sh to reflect this change.
Later:
cvs rm make/rtems.cfg (It isn't used anymore)
cvs add contrib
cvs add contrib/acpolish
cvs commit
I've tested this intensively, but naturally I can't exclude bugs.
Ralf.
PS.: Most probably, this is the last "Towards automake" patch. The next
one probably will be a real automake patch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This one once again changes the scheme to preinstall bsp_specs.
It moves generating PROJECT_ROOT/lib/bsp_specs to
libbsp/<cpu>/<bsp>/wrapup/Makefile.in.
I.e. it decentralizes generation of bsp_specs to a bsp-dependent
directory, because preinstalling bsp_specs in a centralized Makefile
like it has been done until now does not harmonize well with spliting
the toplevel configure script in cpu and bsp-dependent configure scripts
and automake.
First apply the patch (rtems-rc-19990318-0.diff) below, then run the
reorg-bsp_specs.sh script.
IMO, this one is comparatively harmless and eases automake support
significantly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is the next step towards automake:
* Two scripts for the toplevel directory:
a) "autogen" (Idea borrowed from libtool and gnome) A helper script to
recursively regenerate autoconf/automake/aclocal generated files
(Still not perfect but sufficient).
b) "missing" (from automake-cvs archive). This file normally is
automatically generated by automake, but we have to manually add
it until we add automake support to the toplevel configure script.
"chmod 755 missing autogen" after applying the patch.
* Changing the toplevel installation directory [ I can hear you
falling off the chair ;-]
Until now rtems installed itself to $(prefix)/rtems. This is in
contradiction to automake and GNU/FSF/Cygnus conventions.
With this patch applied, rtems installs into $(prefix).
To achieve the old behaviour simply configure with
--prefix=<install-dir>/rtems instead of --prefix=<install-dir>
This is a widely visible change and I can understand if you don't
like it at the present point. It enables us to use automake's
default installation paths instead of having to set up installation
paths manually. At the moment this doesn't help much, but in the not
so far future this would enable us to mix cpu-only dependent libraries
into the host's cross-compiler library and header files into
newlib's include directories, tools into the toolchain directories etc.
I would recommend to change the main installation directory, however it's
up to you to draw the final design decision.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
OK, I 've made up my mind to cut a big chunk of my automake-patches (:-).
Below you can find a drop-in replacement of the aclocal directory. It
contains a lot of new macro files, most of them are directly cut from rtems
top-level configure script, some are new some are identical to former
versions. The motivation behind these files is to reuse parts from rtems
current top-level configure.in script in up-coming subdirectory configure.in
scripts.
I'd like to ask you to untar the archive ontop of the source tree and to
add/commit these files to CVS. Adding these files should not have any
influence on RTEMS momentary configuration (except of you are required to
run aclocal -I aclocal && autoconf afterwards), because most of them
currently are not used at all.
---------
BTW: Please upgrade to autoconf-2.13 and automake-2.4, if you havn't done
this already (egcs/CVS require them, too). My upcoming automake files
require automake-2.4 which requires autoconf-2.13 or later.
|
|
|
|
| |
fcntl support and an external fcntl handler for sockets.
|
|
|
|
|
| |
Moves some configure.in fragments to new macro files below aclocal/
(Motivation: Prepare splitting the toplevel configure.in script)
|
|
|
|
|
|
| |
Erik Ivanenko pointed out a problem in the ne2000.c driver I
submitted: it did not work correctly with bootp. Here is a patch,
based on a patch he sent me.
|
| |
|
|
|
|
| |
about the enable rdbg configure option.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
First, the unlimited patch. I have compiled the unlmited patch for the
Linux posix BSP only and it seems to work cleanly. I would like a really
major application run on this change before commiting as the changes are
very core and significant. I am currently building all the tests to run.
I have no targets suitable to test on at the moment.
I have tested the patch for inline functions and macros.
Turning macros on has found some core bugs. I have fixed these but have
not run all the tests. Please review the patch for these changes. They
are:
1) The conditional compilation for MP support broke the core messages
code. You cannot embed a conditional macro in another macro. The Send
and Urgent Send calls are macros.
2) User extensions handler initialisation now has two parameters. I have
updated the macros to support the extra parameter.
The patch also contains the gcc-target-default.cfg fix required to build
the kernel. More of a by product than a fix for you.
|
|
|
|
| |
<ccj@acm.org>.
|
|
|
|
| |
are build issues with it.
|
|
|
|
|
|
|
|
|
|
|
| |
problems that prevented the 19990302 snapshot from running on
the efi332.
I'm happy to report that rtems-19990302 is running on the efi332
board. I have enclosed a few minor patches below to the efi332 bsp. All
patches are within that library but one. make/custom/efi332.cfg has a
patch to select the right CPU_CFLAGS (at one time -m68332 was a
problem... -mcpu32 or -m68332 work fine now).
|
| |
|
| |
|
| |
|
| |
|
|
|
|
|
| |
by Jiri Gaisler <jgais@ws.estec.esa.nl> when using this
driver on a SPARC.
|
| |
|
| |
|
|
|
|
| |
calculated.
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
| |
patch.
|
|
|
|
|
|
|
|
| |
would work. At the same time, the initial implementation of F_SETFL
was added. A support routine was added to convert internal libio
flags back to the POSIX style. Eventually the internal representation
should be eliminated in the interest of simplicity and code reduction.
This problem was reported by Jake Janovetz <janovetz@tempest.ece.uiuc.edu>.
|
| |
|
| |
|
|
|
|
| |
that shows up if the BSP uses memory near address 0.
|
| |
|
| |
|
|
|
|
| |
in the eth_comm BSP documentation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Comments follow:
Please find attached, the updated network driver. I have verified
that it is working as expected, by timestamping the error messages
generated from the ISR.
If you've taken a look inside, the network driver has a reset thread
in addition to the RX and TX threads. It is possible to avoid the
additional reset thread by allowing the TX driver to time out and then
checking status bits set by the ISR. However, this approach demands
that a transmission is necessary for the NIC to be reset.
Due to Eric V's ISR handling, I suppose that the reset routine could
be called from the "ISR" itself, due to the 8259 interrupt mode, and
that the interrupt is acknowledged prior to running the "ISR".
(Providing that no NIC interrupts are generated during reset -- I
worry about re-entrancy. )
This would be a minor improvement, but you know, I don't want to make
this driver my lifes work.
----------------------------------------------------------------------
----------------------------------------------------------------------
|
|
|
|
|
| |
IO handlers scheme that was implemented originally just to support
sockets. The file system IO switch is more general and works fine.
|