diff options
Diffstat (limited to 'tools/schedsim/rtems/sched_cpu')
-rw-r--r-- | tools/schedsim/rtems/sched_cpu/cpu.c | 169 | ||||
-rw-r--r-- | tools/schedsim/rtems/sched_cpu/cpu_asm.c | 188 | ||||
-rw-r--r-- | tools/schedsim/rtems/sched_cpu/rtems/asm.h | 127 | ||||
-rw-r--r-- | tools/schedsim/rtems/sched_cpu/rtems/score/cpu.h | 1269 | ||||
-rw-r--r-- | tools/schedsim/rtems/sched_cpu/rtems/score/cpu_asm.h | 74 | ||||
-rw-r--r-- | tools/schedsim/rtems/sched_cpu/rtems/score/cpuopts.h | 72 | ||||
-rw-r--r-- | tools/schedsim/rtems/sched_cpu/rtems/score/no_cpu.h | 59 | ||||
-rw-r--r-- | tools/schedsim/rtems/sched_cpu/rtems/score/types.h | 51 | ||||
-rw-r--r-- | tools/schedsim/rtems/sched_cpu/rtems/stringto.h | 1 |
9 files changed, 0 insertions, 2010 deletions
diff --git a/tools/schedsim/rtems/sched_cpu/cpu.c b/tools/schedsim/rtems/sched_cpu/cpu.c deleted file mode 100644 index 0d2e6f6206..0000000000 --- a/tools/schedsim/rtems/sched_cpu/cpu.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * XXX CPU Dependent Source - * - * BASED UPON SOURCE IN RTEMS, MODIFIED FOR SIMULATOR - * - * COPYRIGHT (c) 1989-2010. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include <rtems/system.h> -#include <rtems/score/isr.h> -#include <rtems/score/wkspace.h> - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: NONE - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -void _CPU_Initialize(void) -{ - /* - * If there is not an easy way to initialize the FP context - * during Context_Initialize, then it is usually easier to - * save an "uninitialized" FP context here and copy it to - * the task's during Context_Initialize. - */ - - /* FP context initialization support goes here */ -} - -/*PAGE - * - * _CPU_ISR_Get_level - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -uint32_t _CPU_ISR_Get_level( void ) -{ - /* - * This routine returns the current interrupt level. - */ - - return 0; -} - -/*PAGE - * - * _CPU_ISR_install_raw_handler - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -void _CPU_ISR_install_raw_handler( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - /* - * This is where we install the interrupt handler into the "raw" interrupt - * table used by the CPU to dispatch interrupt handlers. - */ -} - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -void _CPU_ISR_install_vector( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - *old_handler = _ISR_Vector_table[ vector ]; - - /* - * If the interrupt vector table is a table of pointer to isr entry - * points, then we need to install the appropriate RTEMS interrupt - * handler for this vector number. - */ - - _CPU_ISR_install_raw_handler( vector, new_handler, old_handler ); - - /* - * We put the actual user ISR address in '_ISR_vector_table'. This will - * be used by the _ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ vector ] = new_handler; -} - -/*PAGE - * - * _CPU_Install_interrupt_stack - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -void _CPU_Install_interrupt_stack( void ) -{ -} - -/*PAGE - * - * _CPU_Thread_Idle_body - * - * NOTES: - * - * 1. This is the same as the regular CPU independent algorithm. - * - * 2. If you implement this using a "halt", "idle", or "shutdown" - * instruction, then don't forget to put it in an infinite loop. - * - * 3. Be warned. Some processors with onboard DMA have been known - * to stop the DMA if the CPU were put in IDLE mode. This might - * also be a problem with other on-chip peripherals. So use this - * hook with caution. - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -void *_CPU_Thread_Idle_body( uintptr_t ignored ) -{ - - for( ; ; ) - /* insert your "halt" instruction here */ ; -} diff --git a/tools/schedsim/rtems/sched_cpu/cpu_asm.c b/tools/schedsim/rtems/sched_cpu/cpu_asm.c deleted file mode 100644 index e31c980a25..0000000000 --- a/tools/schedsim/rtems/sched_cpu/cpu_asm.c +++ /dev/null @@ -1,188 +0,0 @@ -/* cpu_asm.c ===> cpu_asm.S or cpu_asm.s - * BASED UPON SOURCE IN RTEMS, MODIFIED FOR SIMULATOR - * - * - * This file contains the basic algorithms for all assembly code used - * in an specific CPU port of RTEMS. These algorithms must be implemented - * in assembly language - * - * NOTE: This is supposed to be a .S or .s file NOT a C file. - * - * COPYRIGHT (c) 1989-2010. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - */ - -/* - * This is supposed to be an assembly file. This means that system.h - * and cpu.h should not be included in a "real" cpu_asm file. An - * implementation in assembly should include "cpu_asm.h> - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include <rtems/system.h> -#include <rtems/score/cpu.h> -/* #include "cpu_asm.h> */ - -/* - * _CPU_Context_save_fp_context - * - * This routine is responsible for saving the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -void _CPU_Context_save_fp( - Context_Control_fp **fp_context_ptr -) -{ -} - -/* - * _CPU_Context_restore_fp_context - * - * This routine is responsible for restoring the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -void _CPU_Context_restore_fp( - Context_Control_fp **fp_context_ptr -) -{ -} - -/* _CPU_Context_switch - * - * This routine performs a normal non-FP context switch. - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -) -{ -} - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -void _CPU_Context_restore( - Context_Control *new_context -) -{ -} - -/* void __ISR_Handler() - * - * This routine provides the RTEMS interrupt management. - * - * NO_CPU Specific Information: - * - * XXX document implementation including references if appropriate - */ - -void _ISR_Handler(void) -{ - /* - * This discussion ignores a lot of the ugly details in a real - * implementation such as saving enough registers/state to be - * able to do something real. Keep in mind that the goal is - * to invoke a user's ISR handler which is written in C and - * uses a certain set of registers. - * - * Also note that the exact order is to a large extent flexible. - * Hardware will dictate a sequence for a certain subset of - * _ISR_Handler while requirements for setting - */ - - /* - * At entry to "common" _ISR_Handler, the vector number must be - * available. On some CPUs the hardware puts either the vector - * number or the offset into the vector table for this ISR in a - * known place. If the hardware does not give us this information, - * then the assembly portion of RTEMS for this port will contain - * a set of distinct interrupt entry points which somehow place - * the vector number in a known place (which is safe if another - * interrupt nests this one) and branches to _ISR_Handler. - * - * save some or all context on stack - * may need to save some special interrupt information for exit - * - * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - * if ( _ISR_Nest_level == 0 ) - * switch to software interrupt stack - * #endif - * - * _ISR_Nest_level++; - * - * _Thread_Dispatch_disable_level++; - * - * (*_ISR_Vector_table[ vector ])( vector ); - * - * _Thread_Dispatch_disable_level--; - * - * --_ISR_Nest_level; - * - * if ( _ISR_Nest_level ) - * goto the label "exit interrupt (simple case)" - * - * if ( _Thread_Dispatch_disable_level ) - * _ISR_Signals_to_thread_executing = FALSE; - * goto the label "exit interrupt (simple case)" - * - * if ( _Context_Switch_necessary || _ISR_Signals_to_thread_executing ) { - * _ISR_Signals_to_thread_executing = FALSE; - * call _Thread_Dispatch() or prepare to return to _ISR_Dispatch - * prepare to get out of interrupt - * return from interrupt (maybe to _ISR_Dispatch) - * - * LABEL "exit interrupt (simple case): - * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - * if outermost interrupt - * restore stack - * #endif - * prepare to get out of interrupt - * return from interrupt - */ -} diff --git a/tools/schedsim/rtems/sched_cpu/rtems/asm.h b/tools/schedsim/rtems/sched_cpu/rtems/asm.h deleted file mode 100644 index 8ad1d57032..0000000000 --- a/tools/schedsim/rtems/sched_cpu/rtems/asm.h +++ /dev/null @@ -1,127 +0,0 @@ -/** - * @file rtems/asm.h - * - * BASED UPON SOURCE IN RTEMS, MODIFIED FOR SIMULATOR - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - */ - -/* - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * COPYRIGHT (c) 1994-2010. - * On-Line Applications Research Corporation (OAR). - * - * $Id$ - */ - -#ifndef _RTEMS_ASM_H -#define _RTEMS_ASM_H - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif -#include <rtems/score/cpuopts.h> -#include <rtems/score/no_cpu.h> - -#ifndef __USER_LABEL_PREFIX__ -/** - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - * - * This symbol is prefixed to all C program symbols. - */ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -/** - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - * - * This symbol is prefixed to all register names. - */ -#define __REGISTER_PREFIX__ -#endif - -#include <rtems/concat.h> - -/** Use the right prefix for global labels. */ -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/** Use the right prefix for registers. */ -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -/* - * define macros for all of the registers on this CPU - * - * EXAMPLE: #define d0 REG (d0) - */ - -/* - * Define macros to handle section beginning and ends. - */ - - -/** This macro is used to denote the beginning of a code declaration. */ -#define BEGIN_CODE_DCL .text -/** This macro is used to denote the end of a code declaration. */ -#define END_CODE_DCL -/** This macro is used to denote the beginning of a data declaration section. */ -#define BEGIN_DATA_DCL .data -/** This macro is used to denote the end of a data declaration section. */ -#define END_DATA_DCL -/** This macro is used to denote the beginning of a code section. */ -#define BEGIN_CODE .text -/** This macro is used to denote the end of a code section. */ -#define END_CODE -/** This macro is used to denote the beginning of a data section. */ -#define BEGIN_DATA -/** This macro is used to denote the end of a data section. */ -#define END_DATA -/** This macro is used to denote the beginning of the - * unitialized data section. - */ -#define BEGIN_BSS -/** This macro is used to denote the end of the unitialized data section. */ -#define END_BSS -/** This macro is used to denote the end of the assembly file. */ -#define END - -/** - * This macro is used to declare a public global symbol. - * - * @note This must be tailored for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ -#define PUBLIC(sym) .globl SYM (sym) - -/** - * This macro is used to prototype a public global symbol. - * - * @note This must be tailored for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ -#define EXTERN(sym) .globl SYM (sym) - -#endif diff --git a/tools/schedsim/rtems/sched_cpu/rtems/score/cpu.h b/tools/schedsim/rtems/sched_cpu/rtems/score/cpu.h deleted file mode 100644 index f47c8c3005..0000000000 --- a/tools/schedsim/rtems/sched_cpu/rtems/score/cpu.h +++ /dev/null @@ -1,1269 +0,0 @@ -/** - * @file rtems/score/cpu.h - */ - -/* - * BASED UPON SOURCE IN RTEMS, MODIFIED FOR SIMULATOR - * - * This include file contains information pertaining to the XXX - * processor. - * - * @note This file is part of a porting template that is intended - * to be used as the starting point when porting RTEMS to a new - * CPU family. The following needs to be done when using this as - * the starting point for a new port: - * - * + Anywhere there is an XXX, it should be replaced - * with information about the CPU family being ported to. - * - * + At the end of each comment section, there is a heading which - * says "Port Specific Information:". When porting to RTEMS, - * add CPU family specific information in this section - */ - -/* - * COPYRIGHT (c) 1989-2010. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - */ - -#ifndef _RTEMS_SCORE_CPU_H -#define _RTEMS_SCORE_CPU_H - -#ifdef __cplusplus -extern "C" { -#endif - -#include <stdio.h> /* fprintf */ -#include <stdlib.h> /* exit */ - -#include <rtems/score/no_cpu.h> /* pick up machine definitions */ -#ifndef ASM -#include <rtems/score/types.h> -#endif - -/* conditional compilation parameters */ - -/** - * Should the calls to @ref _Thread_Enable_dispatch be inlined? - * - * If TRUE, then they are inlined. - * If FALSE, then a subroutine call is made. - * - * This conditional is an example of the classic trade-off of size - * versus speed. Inlining the call (TRUE) typically increases the - * size of RTEMS while speeding up the enabling of dispatching. - * - * @note In general, the @ref _Thread_Dispatch_disable_level will - * only be 0 or 1 unless you are in an interrupt handler and that - * interrupt handler invokes the executive.] When not inlined - * something calls @ref _Thread_Enable_dispatch which in turns calls - * @ref _Thread_Dispatch. If the enable dispatch is inlined, then - * one subroutine call is avoided entirely. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_INLINE_ENABLE_DISPATCH TRUE - -/** - * Should the body of the search loops in _Thread_queue_Enqueue_priority - * be unrolled one time? In unrolled each iteration of the loop examines - * two "nodes" on the chain being searched. Otherwise, only one node - * is examined per iteration. - * - * If TRUE, then the loops are unrolled. - * If FALSE, then the loops are not unrolled. - * - * The primary factor in making this decision is the cost of disabling - * and enabling interrupts (_ISR_Flash) versus the cost of rest of the - * body of the loop. On some CPUs, the flash is more expensive than - * one iteration of the loop body. In this case, it might be desirable - * to unroll the loop. It is important to note that on some CPUs, this - * code is the longest interrupt disable period in RTEMS. So it is - * necessary to strike a balance when setting this parameter. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_UNROLL_ENQUEUE_PRIORITY TRUE - -/** - * Does RTEMS manage a dedicated interrupt stack in software? - * - * If TRUE, then a stack is allocated in @ref _ISR_Handler_initialization. - * If FALSE, nothing is done. - * - * If the CPU supports a dedicated interrupt stack in hardware, - * then it is generally the responsibility of the BSP to allocate it - * and set it up. - * - * If the CPU does not support a dedicated interrupt stack, then - * the porter has two options: (1) execute interrupts on the - * stack of the interrupted task, and (2) have RTEMS manage a dedicated - * interrupt stack. - * - * If this is TRUE, @ref CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * @ref CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE - -/** - * Does the CPU follow the simple vectored interrupt model? - * - * If TRUE, then RTEMS allocates the vector table it internally manages. - * If FALSE, then the BSP is assumed to allocate and manage the vector - * table - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_SIMPLE_VECTORED_INTERRUPTS TRUE - -/** - * Does this CPU have hardware support for a dedicated interrupt stack? - * - * If TRUE, then it must be installed during initialization. - * If FALSE, then no installation is performed. - * - * If this is TRUE, @ref CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * @ref CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_HAS_HARDWARE_INTERRUPT_STACK TRUE - -/** - * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? - * - * If TRUE, then the memory is allocated during initialization. - * If FALSE, then the memory is allocated during initialization. - * - * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_ALLOCATE_INTERRUPT_STACK TRUE - -/** - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/** - * @def CPU_HARDWARE_FP - * - * Does the CPU have hardware floating point? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. - * - * If there is a FP coprocessor such as the i387 or mc68881, then - * the answer is TRUE. - * - * The macro name "NO_CPU_HAS_FPU" should be made CPU specific. - * It indicates whether or not this CPU model has FP support. For - * example, it would be possible to have an i386_nofp CPU model - * which set this to false to indicate that you have an i386 without - * an i387 and wish to leave floating point support out of RTEMS. - */ - -/** - * @def CPU_SOFTWARE_FP - * - * Does the CPU have no hardware floating point and GCC provides a - * software floating point implementation which must be context - * switched? - * - * This feature conditional is used to indicate whether or not there - * is software implemented floating point that must be context - * switched. The determination of whether or not this applies - * is very tool specific and the state saved/restored is also - * compiler specific. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#if ( NO_CPU_HAS_FPU == 1 ) -#define CPU_HARDWARE_FP TRUE -#else -#define CPU_HARDWARE_FP FALSE -#endif -#define CPU_SOFTWARE_FP FALSE - -/** - * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. - * - * So far, the only CPUs in which this option has been used are the - * HP PA-RISC and PowerPC. On the PA-RISC, The HP C compiler and - * gcc both implicitly used the floating point registers to perform - * integer multiplies. Similarly, the PowerPC port of gcc has been - * seen to allocate floating point local variables and touch the FPU - * even when the flow through a subroutine (like vfprintf()) might - * not use floating point formats. - * - * If a function which you would not think utilize the FP unit DOES, - * then one can not easily predict which tasks will use the FP hardware. - * In this case, this option should be TRUE. - * - * If @ref CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_ALL_TASKS_ARE_FP TRUE - -/** - * Should the IDLE task have a floating point context? - * - * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. - * - * Setting this to TRUE negatively impacts the time required to preempt - * the IDLE task from an interrupt because the floating point context - * must be saved as part of the preemption. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_IDLE_TASK_IS_FP FALSE - -/** - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? - * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. - * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. - * - * If the floating point context does NOT have to be saved as part of - * interrupt dispatching, then it should be safe to set this to TRUE. - * - * Setting this flag to TRUE results in using a different algorithm - * for deciding when to save and restore the floating point context. - * The deferred FP switch algorithm minimizes the number of times - * the FP context is saved and restored. The FP context is not saved - * until a context switch is made to another, different FP task. - * Thus in a system with only one FP task, the FP context will never - * be saved or restored. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -/** - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine @ref _CPU_Thread_Idle_body - * must be provided and is the default IDLE thread body instead of - * @ref _CPU_Thread_Idle_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - * - * This is intended to allow for supporting processors which have - * a low power or idle mode. When the IDLE thread is executed, then - * the CPU can be powered down. - * - * The order of precedence for selecting the IDLE thread body is: - * - * -# BSP provided - * -# CPU dependent (if provided) - * -# generic (if no BSP and no CPU dependent) - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_PROVIDES_IDLE_THREAD_BODY TRUE - -/** - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? - * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_STACK_GROWS_UP TRUE - -/** - * The following is the variable attribute used to force alignment - * of critical RTEMS structures. On some processors it may make - * sense to have these aligned on tighter boundaries than - * the minimum requirements of the compiler in order to have as - * much of the critical data area as possible in a cache line. - * - * The placement of this macro in the declaration of the variables - * is based on the syntactically requirements of the GNU C - * "__attribute__" extension. For example with GNU C, use - * the following to force a structures to a 32 byte boundary. - * - * __attribute__ ((aligned (32))) - * - * @note Currently only the Priority Bit Map table uses this feature. - * To benefit from using this, the data must be heavily - * used so it will stay in the cache and used frequently enough - * in the executive to justify turning this on. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_STRUCTURE_ALIGNMENT - -/** - * @defgroup CPUEndian Processor Dependent Endianness Support - * - * This group assists in issues related to processor endianness. - */ - -/** - * @ingroup CPUEndian - * Define what is required to specify how the network to host conversion - * routines are handled. - * - * @note @a CPU_BIG_ENDIAN and @a CPU_LITTLE_ENDIAN should NOT have the - * same values. - * - * @see CPU_LITTLE_ENDIAN - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_BIG_ENDIAN TRUE - -/** - * @ingroup CPUEndian - * Define what is required to specify how the network to host conversion - * routines are handled. - * - * @note @ref CPU_BIG_ENDIAN and @ref CPU_LITTLE_ENDIAN should NOT have the - * same values. - * - * @see CPU_BIG_ENDIAN - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_LITTLE_ENDIAN FALSE - -/** - * @ingroup CPUInterrupt - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine @ref _CPU_ISR_Set_level. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_MODES_INTERRUPT_MASK 0x00000001 - -/* - * Processor defined structures required for cpukit/score. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ - -/* may need to put some structures here. */ - -/** - * @defgroup CPUContext Processor Dependent Context Management - * - * From the highest level viewpoint, there are 2 types of context to save. - * - * -# Interrupt registers to save - * -# Task level registers to save - * - * Since RTEMS handles integer and floating point contexts separately, this - * means we have the following 3 context items: - * - * -# task level context stuff:: Context_Control - * -# floating point task stuff:: Context_Control_fp - * -# special interrupt level context :: CPU_Interrupt_frame - * - * On some processors, it is cost-effective to save only the callee - * preserved registers during a task context switch. This means - * that the ISR code needs to save those registers which do not - * persist across function calls. It is not mandatory to make this - * distinctions between the caller/callee saves registers for the - * purpose of minimizing context saved during task switch and on interrupts. - * If the cost of saving extra registers is minimal, simplicity is the - * choice. Save the same context on interrupt entry as for tasks in - * this case. - * - * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then - * care should be used in designing the context area. - * - * On some CPUs with hardware floating point support, the Context_Control_fp - * structure will not be used or it simply consist of an array of a - * fixed number of bytes. This is done when the floating point context - * is dumped by a "FP save context" type instruction and the format - * is not really defined by the CPU. In this case, there is no need - * to figure out the exact format -- only the size. Of course, although - * this is enough information for RTEMS, it is probably not enough for - * a debugger such as gdb. But that is another problem. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ - -/** - * @ingroup CPUContext Management - * This defines the minimal set of integer and processor state registers - * that must be saved during a voluntary context switch from one thread - * to another. - */ -typedef struct { - /** This field is a hint that a port will have a number of integer - * registers that need to be saved at a context switch. - */ - uint32_t some_integer_register; - /** This field is a hint that a port will have a number of system - * registers that need to be saved at a context switch. - */ - uint32_t some_system_register; - - /** This field is a hint that a port will have a register that - * is the stack pointer. - */ - uint32_t stack_pointer; -} Context_Control; - -/** - * @ingroup CPUContext Management - * - * This macro returns the stack pointer associated with @a _context. - * - * @param[in] _context is the thread context area to access - * - * @return This method returns the stack pointer. - */ -#define _CPU_Context_Get_SP( _context ) \ - (_context)->stack_pointer - -/** - * @ingroup CPUContext Management - * This defines the complete set of floating point registers that must - * be saved during any context switch from one thread to another. - */ -typedef struct { - /** FPU registers are listed here */ - double some_float_register; -} Context_Control_fp; - -/** - * @ingroup CPUContext Management - * This defines the set of integer and processor state registers that must - * be saved during an interrupt. This set does not include any which are - * in @ref Context_Control. - */ -typedef struct { - /** This field is a hint that a port will have a number of integer - * registers that need to be saved when an interrupt occurs or - * when a context switch occurs at the end of an ISR. - */ - uint32_t special_interrupt_register; -} CPU_Interrupt_frame; - -/** - * This variable is optional. It is used on CPUs on which it is difficult - * to generate an "uninitialized" FP context. It is filled in by - * @ref _CPU_Initialize and copied into the task's FP context area during - * @ref _CPU_Context_Initialize. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; - -/** - * @defgroup CPUInterrupt Processor Dependent Interrupt Management - * - * On some CPUs, RTEMS supports a software managed interrupt stack. - * This stack is allocated by the Interrupt Manager and the switch - * is performed in @ref _ISR_Handler. These variables contain pointers - * to the lowest and highest addresses in the chunk of memory allocated - * for the interrupt stack. Since it is unknown whether the stack - * grows up or down (in general), this give the CPU dependent - * code the option of picking the version it wants to use. - * - * @note These two variables are required if the macro - * @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ - -/** - * @ingroup CPUInterrupt - * This variable points to the lowest physical address of the interrupt - * stack. - */ -SCORE_EXTERN void *_CPU_Interrupt_stack_low; - -/** - * @ingroup CPUInterrupt - * This variable points to the lowest physical address of the interrupt - * stack. - */ -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -/* - * Nothing prevents the porter from declaring more CPU specific variables. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ - -/* XXX: if needed, put more variables here */ - -/** - * @ingroup CPUContext - * The size of the floating point context area. On some CPUs this - * will not be a "sizeof" because the format of the floating point - * area is not defined -- only the size is. This is usually on - * CPUs with a "floating point save context" instruction. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/** - * Amount of extra stack (above minimum stack size) required by - * MPCI receive server thread. Remember that in a multiprocessor - * system this thread must exist and be able to process all directives. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 - -/** - * @ingroup CPUInterrupt - * This defines the number of entries in the @ref _ISR_Vector_table managed - * by RTEMS. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 32 - -/** - * @ingroup CPUInterrupt - * This defines the highest interrupt vector number for this port. - */ -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/** - * @ingroup CPUInterrupt - * This is defined if the port has a special way to report the ISR nesting - * level. Most ports maintain the variable @a _ISR_Nest_level. - */ -#define CPU_PROVIDES_ISR_IS_IN_PROGRESS FALSE - -/** - * @ingroup CPUContext - * Should be large enough to run all RTEMS tests. This ensures - * that a "reasonable" small application should not have any problems. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_STACK_MINIMUM_SIZE (1024*4) - -/** - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_ALIGNMENT 8 - -/** - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by @ref CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * @ref CPU_ALIGNMENT. If the @ref CPU_ALIGNMENT is strict enough for - * the heap, then this should be set to @ref CPU_ALIGNMENT. - * - * @note This does not have to be a power of 2 although it should be - * a multiple of 2 greater than or equal to 2. The requirement - * to be a multiple of 2 is because the heap uses the least - * significant field of the front and back flags to indicate - * that a block is in use or free. So you do not want any odd - * length blocks really putting length data in that bit. - * - * On byte oriented architectures, @ref CPU_HEAP_ALIGNMENT normally will - * have to be greater or equal to than @ref CPU_ALIGNMENT to ensure that - * elements allocated from the heap meet all restrictions. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT - -/** - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * @ref CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as @ref CPU_ALIGNMENT. If the @ref CPU_ALIGNMENT is - * strict enough for the partition, then this should be set to - * @ref CPU_ALIGNMENT. - * - * @note This does not have to be a power of 2. It does have to - * be greater or equal to than @ref CPU_ALIGNMENT. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/** - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by @ref CPU_ALIGNMENT. If the - * @ref CPU_ALIGNMENT is strict enough for the stack, then this should be - * set to 0. - * - * @note This must be a power of 2 either 0 or greater than @ref CPU_ALIGNMENT. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_STACK_ALIGNMENT 0 - -/* - * ISR handler macros - */ - -/** - * @ingroup CPUInterrupt - * Support routine to initialize the RTEMS vector table after it is allocated. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_Initialize_vectors() - -/** - * @ingroup CPUInterrupt - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in @a _isr_cookie. - * - * @param[out] _isr_cookie will contain the previous level cookie - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_ISR_Disable( _isr_cookie ) \ - { \ - (_isr_cookie) = 0; /* do something to prevent warnings */ \ - } - -/** - * @ingroup CPUInterrupt - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * @a _isr_cookie is not modified. - * - * @param[in] _isr_cookie contain the previous level cookie - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_ISR_Enable( _isr_cookie ) \ - { \ - } - -/** - * @ingroup CPUInterrupt - * This temporarily restores the interrupt to @a _isr_cookie before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter @a _isr_cookie is not - * modified. - * - * @param[in] _isr_cookie contain the previous level cookie - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_ISR_Flash( _isr_cookie ) \ - { \ - } - -/** - * @ingroup CPUInterrupt - * - * This routine and @ref _CPU_ISR_Get_level - * Map the interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a generic fashion are undefined. Someday, - * it would be nice if these were "mapped" by the application - * via a callout. For example, m68k has 8 levels 0 - 7, levels - * 8 - 255 would be available for bsp/application specific meaning. - * This could be used to manage a programmable interrupt controller - * via the rtems_task_mode directive. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_ISR_Set_level( new_level ) \ - { \ - } - -/** - * @ingroup CPUInterrupt - * Return the current interrupt disable level for this task in - * the format used by the interrupt level portion of the task mode. - * - * @note This routine usually must be implemented as a subroutine. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -uint32_t _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/* Context handler macros */ - -/** - * @ingroup CPUContext - * Initialize the context to a state suitable for starting a - * task after a context restore operation. Generally, this - * involves: - * - * - setting a starting address - * - preparing the stack - * - preparing the stack and frame pointers - * - setting the proper interrupt level in the context - * - initializing the floating point context - * - * This routine generally does not set any unnecessary register - * in the context. The state of the "general data" registers is - * undefined at task start time. - * - * @param[in] _the_context is the context structure to be initialized - * @param[in] _stack_base is the lowest physical address of this task's stack - * @param[in] _size is the size of this task's stack - * @param[in] _isr is the interrupt disable level - * @param[in] _entry_point is the thread's entry point. This is - * always @a _Thread_Handler - * @param[in] _is_fp is TRUE if the thread is to be a floating - * point thread. This is typically only used on CPUs where the - * FPU may be easily disabled by software such as on the SPARC - * where the PSR contains an enable FPU bit. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ - _isr, _entry_point, _is_fp ) \ - { \ - } - -/** - * This routine is responsible for somehow restarting the currently - * executing task. If you are lucky, then all that is necessary - * is restoring the context. Otherwise, there will need to be - * a special assembly routine which does something special in this - * case. For many ports, simply adding a label to the restore path - * of @ref _CPU_Context_switch will work. On other ports, it may be - * possibly to load a few arguments and jump to the restore path. It will - * not work if restarting self conflicts with the stack frame - * assumptions of restoring a context. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -/** - * @ingroup CPUContext - * The purpose of this macro is to allow the initial pointer into - * a floating point context area (used to save the floating point - * context) to be at an arbitrary place in the floating point - * context area. - * - * This is necessary because some FP units are designed to have - * their context saved as a stack which grows into lower addresses. - * Other FP units can be saved by simply moving registers into offsets - * from the base of the context area. Finally some FP units provide - * a "dump context" instruction which could fill in from high to low - * or low to high based on the whim of the CPU designers. - * - * @param[in] _base is the lowest physical address of the floating point - * context area - * @param[in] _offset is the offset into the floating point area - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) - -/** - * This routine initializes the FP context area passed to it to. - * There are a few standard ways in which to initialize the - * floating point context. The code included for this macro assumes - * that this is a CPU in which a "initial" FP context was saved into - * @a _CPU_Null_fp_context and it simply copies it to the destination - * context passed to it. - * - * Other floating point context save/restore models include: - * -# not doing anything, and - * -# putting a "null FP status word" in the correct place in the FP context. - * - * @param[in] _destination is the floating point context area - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_Context_Initialize_fp( _destination ) \ - { \ - *(*(_destination)) = _CPU_Null_fp_context; \ - } - -/* end of Context handler macros */ - -/* Fatal Error manager macros */ - -/** - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * halts/stops the CPU. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_Fatal_halt( _error ) \ - { \ - fprintf( stderr, "FATAL ERROR!!\n" ); \ - exit( -1 ); \ - } - -/* end of Fatal Error manager macros */ - -/* Bitfield handler macros */ - -/** - * @defgroup CPUBitfield Processor Dependent Bitfield Manipulation - * - * This set of routines are used to implement fast searches for - * the most important ready task. - */ - -/** - * @ingroup CPUBitfield - * This definition is set to TRUE if the port uses the generic bitfield - * manipulation implementation. - */ -#define CPU_USE_GENERIC_BITFIELD_CODE TRUE - -/** - * @ingroup CPUBitfield - * This definition is set to TRUE if the port uses the data tables provided - * by the generic bitfield manipulation implementation. - * This can occur when actually using the generic bitfield manipulation - * implementation or when implementing the same algorithm in assembly - * language for improved performance. It is unlikely that a port will use - * the data if it has a bitfield scan instruction. - */ -#define CPU_USE_GENERIC_BITFIELD_DATA TRUE - -/** - * @ingroup CPUBitfield - * This routine sets @a _output to the bit number of the first bit - * set in @a _value. @a _value is of CPU dependent type - * @a Priority_Bit_map_control. This type may be either 16 or 32 bits - * wide although only the 16 least significant bits will be used. - * - * There are a number of variables in using a "find first bit" type - * instruction. - * - * -# What happens when run on a value of zero? - * -# Bits may be numbered from MSB to LSB or vice-versa. - * -# The numbering may be zero or one based. - * -# The "find first bit" instruction may search from MSB or LSB. - * - * RTEMS guarantees that (1) will never happen so it is not a concern. - * (2),(3), (4) are handled by the macros @ref _CPU_Priority_Mask and - * @ref _CPU_Priority_bits_index. These three form a set of routines - * which must logically operate together. Bits in the _value are - * set and cleared based on masks built by @ref _CPU_Priority_Mask. - * The basic major and minor values calculated by @ref _Priority_Major - * and @ref _Priority_Minor are "massaged" by @ref _CPU_Priority_bits_index - * to properly range between the values returned by the "find first bit" - * instruction. This makes it possible for @ref _Priority_Get_highest to - * calculate the major and directly index into the minor table. - * This mapping is necessary to ensure that 0 (a high priority major/minor) - * is the first bit found. - * - * This entire "find first bit" and mapping process depends heavily - * on the manner in which a priority is broken into a major and minor - * components with the major being the 4 MSB of a priority and minor - * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest - * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next - * to the lowest priority. - * - * If your CPU does not have a "find first bit" instruction, then - * there are ways to make do without it. Here are a handful of ways - * to implement this in software: - * -@verbatim - - a series of 16 bit test instructions - - a "binary search using if's" - - _number = 0 - if _value > 0x00ff - _value >>=8 - _number = 8; - - if _value > 0x0000f - _value >=8 - _number += 4 - - _number += bit_set_table[ _value ] -@endverbatim - - * where bit_set_table[ 16 ] has values which indicate the first - * bit set - * - * @param[in] _value is the value to be scanned - * @param[in] _output is the first bit set - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - (_output) = 0; /* do something to prevent warnings */ \ - } -#endif - -/* end of Bitfield handler macros */ - -/** - * This routine builds the mask which corresponds to the bit fields - * as searched by @ref _CPU_Bitfield_Find_first_bit. See the discussion - * for that routine. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 1 << (_bit_number) ) - -#endif - -/** - * @ingroup CPUBitfield - * This routine translates the bit numbers returned by - * @ref _CPU_Bitfield_Find_first_bit into something suitable for use as - * a major or minor component of a priority. See the discussion - * for that routine. - * - * @param[in] _priority is the major or minor number to translate - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_bits_index( _priority ) \ - (_priority) - -#endif - -/* end of Priority handler macros */ - -/* functions */ - -/** - * This routine performs CPU dependent initialization. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Initialize(void); - -/** - * @ingroup CPUInterrupt - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - * - * @param[in] vector is the vector number - * @param[in] new_handler is the raw ISR handler to install - * @param[in] old_handler is the previously installed ISR Handler - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_ISR_install_raw_handler( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/** - * @ingroup CPUInterrupt - * This routine installs an interrupt vector. - * - * @param[in] vector is the vector number - * @param[in] new_handler is the RTEMS ISR handler to install - * @param[in] old_handler is the previously installed ISR Handler - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_ISR_install_vector( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/** - * @ingroup CPUInterrupt - * This routine installs the hardware interrupt stack pointer. - * - * @note It need only be provided if @ref CPU_HAS_HARDWARE_INTERRUPT_STACK - * is TRUE. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Install_interrupt_stack( void ); - -/** - * This routine is the CPU dependent IDLE thread body. - * - * @note It need only be provided if @ref CPU_PROVIDES_IDLE_THREAD_BODY - * is TRUE. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void *_CPU_Thread_Idle_body( uintptr_t ignored ); - -/** - * @ingroup CPUContext - * This routine switches from the run context to the heir context. - * - * @param[in] run points to the context of the currently executing task - * @param[in] heir points to the context of the heir task - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/** - * @ingroup CPUContext - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in @ref _CPU_Context_switch. - * - * @param[in] new_context points to the context to be restored. - * - * @note May be unnecessary to reload some registers. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Context_restore( - Context_Control *new_context -); - -/** - * @ingroup CPUContext - * This routine saves the floating point context passed to it. - * - * @param[in] fp_context_ptr is a pointer to a pointer to a floating - * point context area - * - * @return on output @a *fp_context_ptr will contain the address that - * should be used with @ref _CPU_Context_restore_fp to restore this context. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Context_save_fp( - Context_Control_fp **fp_context_ptr -); - -/** - * @ingroup CPUContext - * This routine restores the floating point context passed to it. - * - * @param[in] fp_context_ptr is a pointer to a pointer to a floating - * point context area to restore - * - * @return on output @a *fp_context_ptr will contain the address that - * should be used with @ref _CPU_Context_save_fp to save this context. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Context_restore_fp( - Context_Control_fp **fp_context_ptr -); - -/** - * @ingroup CPUEndian - * The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version will work on any processor, but if there is a better - * way for your CPU PLEASE use it. The most common way to do this is to: - * - * swap least significant two bytes with 16-bit rotate - * swap upper and lower 16-bits - * swap most significant two bytes with 16-bit rotate - * - * Some CPUs have special instructions which swap a 32-bit quantity in - * a single instruction (e.g. i486). It is probably best to avoid - * an "endian swapping control bit" in the CPU. One good reason is - * that interrupts would probably have to be disabled to ensure that - * an interrupt does not try to access the same "chunk" with the wrong - * endian. Another good reason is that on some CPUs, the endian bit - * endianness for ALL fetches -- both code and data -- so the code - * will be fetched incorrectly. - * - * @param[in] value is the value to be swapped - * @return the value after being endian swapped - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -static inline uint32_t CPU_swap_u32( - uint32_t value -) -{ - uint32_t byte1, byte2, byte3, byte4, swapped; - - byte4 = (value >> 24) & 0xff; - byte3 = (value >> 16) & 0xff; - byte2 = (value >> 8) & 0xff; - byte1 = value & 0xff; - - swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4; - return swapped; -} - -/** - * @ingroup CPUEndian - * This routine swaps a 16 bir quantity. - * - * @param[in] value is the value to be swapped - * @return the value after being endian swapped - */ -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/tools/schedsim/rtems/sched_cpu/rtems/score/cpu_asm.h b/tools/schedsim/rtems/sched_cpu/rtems/score/cpu_asm.h deleted file mode 100644 index 7c80adbfd8..0000000000 --- a/tools/schedsim/rtems/sched_cpu/rtems/score/cpu_asm.h +++ /dev/null @@ -1,74 +0,0 @@ -/** - * @file rtems/score/cpu_asm.h - */ - -/* - * BASED UPON SOURCE IN RTEMS, MODIFIED FOR SIMULATOR - * - * Very loose template for an include file for the cpu_asm.? file - * if it is implemented as a ".S" file (preprocessed by cpp) instead - * of a ".s" file (preprocessed by gm4 or gasp). - * - * COPYRIGHT (c) 1989-2010. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - * - */ - -#ifndef _RTEMS_SCORE_CPU_ASM_H -#define _RTEMS_SCORE_CPU_ASM_H - -/* pull in the generated offsets */ - -#include <rtems/score/offsets.h> - -/* - * Hardware General Registers - */ - -/* put something here */ - -/* - * Hardware Floating Point Registers - */ - -/* put something here */ - -/* - * Hardware Control Registers - */ - -/* put something here */ - -/* - * Calling Convention - */ - -/* put something here */ - -/* - * Temporary registers - */ - -/* put something here */ - -/* - * Floating Point Registers - SW Conventions - */ - -/* put something here */ - -/* - * Temporary floating point registers - */ - -/* put something here */ - -#endif - -/* end of file */ diff --git a/tools/schedsim/rtems/sched_cpu/rtems/score/cpuopts.h b/tools/schedsim/rtems/sched_cpu/rtems/score/cpuopts.h deleted file mode 100644 index 1db8d43ff5..0000000000 --- a/tools/schedsim/rtems/sched_cpu/rtems/score/cpuopts.h +++ /dev/null @@ -1,72 +0,0 @@ -/** - * @file rtems/score/cpuopts.h - */ - -/* BASED UPON SOURCE IN RTEMS, MODIFIED FOR SIMULATOR */ - -/* target cpu dependent options file */ -/* automatically generated -- DO NOT EDIT!! */ -#ifndef _RTEMS_SCORE_CPUOPTS_H -#define _RTEMS_SCORE_CPUOPTS_H - -/* This is added by hand to indicate we are on the RTEMS Scheduler Simulator */ -#define RTEMS_SCHEDSIM - -/* if RTEMS_DEBUG is enabled */ -/* #undef RTEMS_DEBUG */ - -/* if itron api is supported */ -/* #undef RTEMS_ITRON_API */ - -/* if multiprocessing is enabled */ -/* #undef RTEMS_MULTIPROCESSING */ - -/* if using newlib */ -#define RTEMS_NEWLIB 1 - -/* if posix api is supported */ -/* #undef RTEMS_POSIX_API */ - -/* if networking is enabled */ -#define RTEMS_NETWORKING 1 - -/* if RTEMS uses tar.h */ -#define RTEMS_USES_TAR_H 1 - -/* RTEMS version string */ -#define RTEMS_VERSION "4.10.99.0" - -/* disable nanosecond granularity for statistics */ -/* #undef __RTEMS_USE_TICKS_FOR_STATISTICS__ */ - -/* disable nanosecond granularity for cpu usage statistics */ -/* #undef __RTEMS_USE_TICKS_CPU_USAGE_STATISTICS__ */ - -/* disable nanosecond granularity for period statistics */ -/* #undef __RTEMS_USE_TICKS_RATE_MONOTONIC_STATISTICS__ */ - -/* disable inlining _Thread_Enable_dispatch */ -/* #undef __RTEMS_DO_NOT_INLINE_THREAD_ENABLE_DISPATCH__ */ - -/* disable inlining _Thread_Enable_dispatch */ -/* #undef __RTEMS_DO_NOT_INLINE_CORE_MUTEX_SEIZE__ */ - -/* disable inlining _Thread_queue_Enqueue_priority */ -/* #undef __RTEMS_DO_NOT_UNROLL_THREADQ_ENQUEUE_PRIORITY__ */ - -/* disable strict order mutex */ -/* #undef __RTEMS_STRICT_ORDER_MUTEX__ */ - -/* Define to 1 if ada/gnat bindings are built-in */ -#define __RTEMS_ADA__ 1 - -/* major version portion of an RTEMS release */ -#define __RTEMS_MAJOR__ 4 - -/* minor version portion of an RTEMS release */ -#define __RTEMS_MINOR__ 10 - -/* revision version portion of an RTEMS release */ -#define __RTEMS_REVISION__ 99 - -#endif /* _RTEMS_SCORE_CPUOPTS_H */ diff --git a/tools/schedsim/rtems/sched_cpu/rtems/score/no_cpu.h b/tools/schedsim/rtems/sched_cpu/rtems/score/no_cpu.h deleted file mode 100644 index bb0706fd76..0000000000 --- a/tools/schedsim/rtems/sched_cpu/rtems/score/no_cpu.h +++ /dev/null @@ -1,59 +0,0 @@ -/* no_cpu.h - * - * BASED UPON SOURCE IN RTEMS, MODIFIED FOR SIMULATOR - * - * This file sets up basic CPU dependency settings based on - * compiler settings. For example, it can determine if - * floating point is available. This particular implementation - * is specified to the NO CPU port. - * - * - * COPYRIGHT (c) 1989-2010. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - * - */ - -#ifndef _RTEMS_SCORE_NO_CPU_H -#define _RTEMS_SCORE_NO_CPU_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This file contains the information required to build - * RTEMS for a particular member of the NO CPU family. - * It does this by setting variables to indicate which - * implementation dependent features are present in a particular - * member of the family. - * - * This is a good place to list all the known CPU models - * that this port supports and which RTEMS CPU model they correspond - * to. - */ - -/* - * Figure out all CPU Model Feature Flags based upon compiler - * predefines. - */ - -#define CPU_MODEL_NAME "" -#define NOCPU_HAS_FPU 1 - -/* - * Define the name of the CPU family. - */ - -#define CPU_NAME "RTEMS Sheduler Simulator" - -#ifdef __cplusplus -} -#endif - -#endif /* _RTEMS_SCORE_NO_CPU_H */ diff --git a/tools/schedsim/rtems/sched_cpu/rtems/score/types.h b/tools/schedsim/rtems/sched_cpu/rtems/score/types.h deleted file mode 100644 index 10e4f03e70..0000000000 --- a/tools/schedsim/rtems/sched_cpu/rtems/score/types.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * @file rtems/score/types.h - */ - -/* - * BASED UPON SOURCE IN RTEMS, MODIFIED FOR SIMULATOR - * - * This include file contains type definitions pertaining to the Intel - * no_cpu processor family. - * - * COPYRIGHT (c) 1989-2010. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.com/license/LICENSE. - * - * $Id$ - */ - -#ifndef _RTEMS_SCORE_TYPES_H -#define _RTEMS_SCORE_TYPES_H - -#include <rtems/score/basedefs.h> - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -/** This defines the type for a priority bit map entry. */ -typedef uint16_t Priority_bit_map_Control; - -/** This defines the return type for an ISR entry point. */ -typedef void no_cpu_isr; - -/** This defines the prototype for an ISR entry point. */ -typedef no_cpu_isr ( *no_cpu_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif diff --git a/tools/schedsim/rtems/sched_cpu/rtems/stringto.h b/tools/schedsim/rtems/sched_cpu/rtems/stringto.h deleted file mode 100644 index 9201f5bc0d..0000000000 --- a/tools/schedsim/rtems/sched_cpu/rtems/stringto.h +++ /dev/null @@ -1 +0,0 @@ -#include <stringto.h> |