diff options
Diffstat (limited to 'testsuites/validation/tc-signal-catch.c')
| -rw-r--r-- | testsuites/validation/tc-signal-catch.c | 101 |
1 files changed, 48 insertions, 53 deletions
diff --git a/testsuites/validation/tc-signal-catch.c b/testsuites/validation/tc-signal-catch.c index 7c3292ba71..acca855ede 100644 --- a/testsuites/validation/tc-signal-catch.c +++ b/testsuites/validation/tc-signal-catch.c @@ -279,8 +279,7 @@ static void RtemsSignalReqCatch_Pre_Preempt_Prepare( switch ( state ) { case RtemsSignalReqCatch_Pre_Preempt_Yes: { /* - * The ``mode_set`` parameter shall specify that - * preemption is enabled. + * The ``mode_set`` parameter shall specify that preemption is enabled. */ #if defined(RTEMS_SMP) if ( rtems_configuration_get_maximum_processors() == 1 ) { @@ -294,8 +293,7 @@ static void RtemsSignalReqCatch_Pre_Preempt_Prepare( case RtemsSignalReqCatch_Pre_Preempt_No: { /* - * The ``mode_set`` parameter shall specify that - * preemption is disabled. + * The ``mode_set`` parameter shall specify that preemption is disabled. */ ctx->mode |= RTEMS_NO_PREEMPT; break; @@ -314,8 +312,7 @@ static void RtemsSignalReqCatch_Pre_Timeslice_Prepare( switch ( state ) { case RtemsSignalReqCatch_Pre_Timeslice_Yes: { /* - * The ``mode_set`` parameter shall specify that - * timeslicing is enabled. + * The ``mode_set`` parameter shall specify that timeslicing is enabled. */ ctx->mode |= RTEMS_TIMESLICE; break; @@ -323,8 +320,7 @@ static void RtemsSignalReqCatch_Pre_Timeslice_Prepare( case RtemsSignalReqCatch_Pre_Timeslice_No: { /* - * The ``mode_set`` parameter shall specify that - * timeslicing is disabled. + * The ``mode_set`` parameter shall specify that timeslicing is disabled. */ ctx->normal_mode |= RTEMS_TIMESLICE; break; @@ -343,8 +339,8 @@ static void RtemsSignalReqCatch_Pre_ASR_Prepare( switch ( state ) { case RtemsSignalReqCatch_Pre_ASR_Yes: { /* - * The ``mode_set`` parameter shall specify that - * ASR processing is enabled. + * The ``mode_set`` parameter shall specify that ASR processing is + * enabled. */ /* We cannot disable ASR processing at normal task level for this test */ break; @@ -352,8 +348,8 @@ static void RtemsSignalReqCatch_Pre_ASR_Prepare( case RtemsSignalReqCatch_Pre_ASR_No: { /* - * The ``mode_set`` parameter shall specify that - * ASR processing is disabled. + * The ``mode_set`` parameter shall specify that ASR processing is + * disabled. */ ctx->mode |= RTEMS_NO_ASR; break; @@ -372,8 +368,7 @@ static void RtemsSignalReqCatch_Pre_IntLvl_Prepare( switch ( state ) { case RtemsSignalReqCatch_Pre_IntLvl_Zero: { /* - * The ``mode_set`` parameter shall specify an interrupt - * level of zero. + * The ``mode_set`` parameter shall specify an interrupt level of zero. */ #if !defined(RTEMS_SMP) && CPU_ENABLE_ROBUST_THREAD_DISPATCH == FALSE ctx->normal_mode |= RTEMS_INTERRUPT_LEVEL( 1 ); @@ -383,8 +378,7 @@ static void RtemsSignalReqCatch_Pre_IntLvl_Prepare( case RtemsSignalReqCatch_Pre_IntLvl_Positive: { /* - * The ``mode_set`` parameter shall specify a positive - * interrupt level. + * The ``mode_set`` parameter shall specify a positive interrupt level. */ ctx->mode |= RTEMS_INTERRUPT_LEVEL( 1 ); break; @@ -403,8 +397,7 @@ static void RtemsSignalReqCatch_Post_Status_Check( switch ( state ) { case RtemsSignalReqCatch_Post_Status_Ok: { /* - * The return status of rtems_signal_catch() shall be - * RTEMS_SUCCESSFUL. + * The return status of rtems_signal_catch() shall be RTEMS_SUCCESSFUL. */ T_rsc_success( ctx->catch_status ); break; @@ -414,8 +407,8 @@ static void RtemsSignalReqCatch_Post_Status_Check( /* * Where the system is configured with SMP support, if the scheduler does * not support the no-preempt mode, then the return status of - * rtems_signal_catch() shall be RTEMS_NOT_IMPLEMENTED, - * otherwise the return status shall be RTEMS_SUCCESSFUL. + * rtems_signal_catch() shall be RTEMS_NOT_IMPLEMENTED, otherwise the + * return status shall be RTEMS_SUCCESSFUL. */ #if defined(RTEMS_SMP) if ( rtems_configuration_get_maximum_processors() > 1 ) { @@ -434,8 +427,8 @@ static void RtemsSignalReqCatch_Post_Status_Check( * Where the system is configured with SMP support and the configured * processor maximum is greater than one, or the CPU port enabled robust * thread dispatching, the return status of rtems_signal_catch() shall be - * RTEMS_NOT_IMPLEMENTED, otherwise the return status - * shall be RTEMS_SUCCESSFUL. + * RTEMS_NOT_IMPLEMENTED, otherwise the return status shall be + * RTEMS_SUCCESSFUL. */ #if CPU_ENABLE_ROBUST_THREAD_DISPATCH == TRUE T_rsc( ctx->catch_status, RTEMS_NOT_IMPLEMENTED ); @@ -464,9 +457,10 @@ static void RtemsSignalReqCatch_Post_Send_Check( switch ( state ) { case RtemsSignalReqCatch_Post_Send_New: { /* - * When a signal set is sent to the caller of rtems_signal_catch() and the - * call was successful, the ASR processing shall be done with the specified - * handler, otherwise the ASR information of the caller shall be unchanged. + * When a signal set is sent to the caller of rtems_signal_catch() and + * the call was successful, the ASR processing shall be done with the + * specified handler, otherwise the ASR information of the caller shall + * be unchanged. */ T_rsc_success( ctx->send_status ); @@ -484,10 +478,10 @@ static void RtemsSignalReqCatch_Post_Send_Check( case RtemsSignalReqCatch_Post_Send_NotDef: { /* - * When a signal set is sent to the caller of rtems_signal_catch() and the - * call was successful, the ASR processing shall be deactivated and all - * pending signals shall be cleared, otherwise the ASR information of the - * caller shall be unchanged. + * When a signal set is sent to the caller of rtems_signal_catch() and + * the call was successful, the ASR processing shall be deactivated and + * all pending signals shall be cleared, otherwise the ASR information of + * the caller shall be unchanged. */ if ( ctx->catch_status == RTEMS_SUCCESSFUL ) { T_rsc( ctx->send_status, RTEMS_NOT_DEFINED ); @@ -516,9 +510,9 @@ static void RtemsSignalReqCatch_Post_Preempt_Check( switch ( state ) { case RtemsSignalReqCatch_Post_Preempt_Yes: { /* - * When a signal set is sent to the caller of rtems_signal_catch() and the - * call with a valid handler was successful, the ASR processing shall be - * done with preemption enabled. + * When a signal set is sent to the caller of rtems_signal_catch() and + * the call with a valid handler was successful, the ASR processing shall + * be done with preemption enabled. */ CheckHandlerMode( ctx, RTEMS_PREEMPT_MASK, RTEMS_PREEMPT ); break; @@ -526,9 +520,9 @@ static void RtemsSignalReqCatch_Post_Preempt_Check( case RtemsSignalReqCatch_Post_Preempt_No: { /* - * When a signal set is sent to the caller of rtems_signal_catch() and the - * call with a valid handler was successful, the ASR processing shall be - * done with preemption disabled. + * When a signal set is sent to the caller of rtems_signal_catch() and + * the call with a valid handler was successful, the ASR processing shall + * be done with preemption disabled. */ CheckHandlerMode( ctx, RTEMS_PREEMPT_MASK, RTEMS_NO_PREEMPT ); break; @@ -547,9 +541,9 @@ static void RtemsSignalReqCatch_Post_Timeslice_Check( switch ( state ) { case RtemsSignalReqCatch_Post_Timeslice_Yes: { /* - * When a signal set is sent to the caller of rtems_signal_catch() and the - * call with a valid handler was successful, the ASR processing shall be - * done with timeslicing enabled. + * When a signal set is sent to the caller of rtems_signal_catch() and + * the call with a valid handler was successful, the ASR processing shall + * be done with timeslicing enabled. */ CheckHandlerMode( ctx, RTEMS_TIMESLICE_MASK, RTEMS_TIMESLICE ); break; @@ -557,9 +551,9 @@ static void RtemsSignalReqCatch_Post_Timeslice_Check( case RtemsSignalReqCatch_Post_Timeslice_No: { /* - * When a signal set is sent to the caller of rtems_signal_catch() and the - * call with a valid handler was successful, the ASR processing shall be - * done with timeslicing disabled. + * When a signal set is sent to the caller of rtems_signal_catch() and + * the call with a valid handler was successful, the ASR processing shall + * be done with timeslicing disabled. */ CheckHandlerMode( ctx, RTEMS_TIMESLICE_MASK, RTEMS_NO_TIMESLICE ); break; @@ -578,9 +572,9 @@ static void RtemsSignalReqCatch_Post_ASR_Check( switch ( state ) { case RtemsSignalReqCatch_Post_ASR_Yes: { /* - * When a signal set is sent to the caller of rtems_signal_catch() and the - * call with a valid handler was successful, the ASR processing shall be - * done with ASR processing enabled. + * When a signal set is sent to the caller of rtems_signal_catch() and + * the call with a valid handler was successful, the ASR processing shall + * be done with ASR processing enabled. */ CheckHandlerMode( ctx, RTEMS_ASR_MASK, RTEMS_ASR ); break; @@ -588,9 +582,9 @@ static void RtemsSignalReqCatch_Post_ASR_Check( case RtemsSignalReqCatch_Post_ASR_No: { /* - * When a signal set is sent to the caller of rtems_signal_catch() and the - * call with a valid handler was successful, the ASR processing shall be - * done with ASR processing disabled. + * When a signal set is sent to the caller of rtems_signal_catch() and + * the call with a valid handler was successful, the ASR processing shall + * be done with ASR processing disabled. */ CheckHandlerMode( ctx, RTEMS_ASR_MASK, RTEMS_NO_ASR ); break; @@ -609,9 +603,9 @@ static void RtemsSignalReqCatch_Post_IntLvl_Check( switch ( state ) { case RtemsSignalReqCatch_Post_IntLvl_Zero: { /* - * When a signal set is sent to the caller of rtems_signal_catch() and the - * call with a valid handler was successful, the ASR processing shall be - * done with interrupts enabled. + * When a signal set is sent to the caller of rtems_signal_catch() and + * the call with a valid handler was successful, the ASR processing shall + * be done with interrupts enabled. */ CheckHandlerMode( ctx, RTEMS_INTERRUPT_MASK, RTEMS_INTERRUPT_LEVEL( 0 ) ); break; @@ -619,9 +613,10 @@ static void RtemsSignalReqCatch_Post_IntLvl_Check( case RtemsSignalReqCatch_Post_IntLvl_Positive: { /* - * When a signal set is sent to the caller of rtems_signal_catch() and the - * call with a valid handler was successful, the ASR processing shall be - * done with interrupts disabled according to the specified interrupt level. + * When a signal set is sent to the caller of rtems_signal_catch() and + * the call with a valid handler was successful, the ASR processing shall + * be done with interrupts disabled according to the specified interrupt + * level. */ CheckHandlerMode( ctx, RTEMS_INTERRUPT_MASK, RTEMS_INTERRUPT_LEVEL( 1 ) ); break; |