diff options
Diffstat (limited to 'spec/build/bsps/powerpc/mpc8260ads/optuartsiomode.yml')
-rw-r--r-- | spec/build/bsps/powerpc/mpc8260ads/optuartsiomode.yml | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/spec/build/bsps/powerpc/mpc8260ads/optuartsiomode.yml b/spec/build/bsps/powerpc/mpc8260ads/optuartsiomode.yml index eb0d9d8bda..d8bfb0fc83 100644 --- a/spec/build/bsps/powerpc/mpc8260ads/optuartsiomode.yml +++ b/spec/build/bsps/powerpc/mpc8260ads/optuartsiomode.yml @@ -4,9 +4,10 @@ actions: - define-condition: null build-type: option copyrights: -- Copyright (C) 2020 embedded brains GmbH (http://www.embedded-brains.de) -default: false -default-by-variant: [] +- Copyright (C) 2020 embedded brains GmbH & Co. KG +default: +- enabled-by: true + value: false description: | (BSP--console driver) Define to 0 or 1 if you want polled I/O performed by RTEMS. Define to 1 if you want interrupt-driven performed by RTEMS. Define to 2 if you want polled I/O performed by EPPCBug. There is no provision to have a mix of interrupt-driven and polled I/O ports, except that the printk port may use a different mode from the other ports. If this is done, do not open the printk port from an RTEMS application. With EPPCBug 1.1, if mode 2 is selected, CONSOLE_MINOR must be set to SMC1_MINOR. This is a deficiency of the firmware: it does not perform serial I/O on any port other than its default debug port, which must be SMC1. enabled-by: true |