diff options
Diffstat (limited to 'make/custom')
-rw-r--r-- | make/custom/force386.cfg | 74 | ||||
-rw-r--r-- | make/custom/go32.cfg | 110 | ||||
-rw-r--r-- | make/custom/go32_p5.cfg | 15 |
3 files changed, 0 insertions, 199 deletions
diff --git a/make/custom/force386.cfg b/make/custom/force386.cfg deleted file mode 100644 index 33d790a117..0000000000 --- a/make/custom/force386.cfg +++ /dev/null @@ -1,74 +0,0 @@ -# -# Config file for the force386 BSP -# -# $Id$ -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=i386 -RTEMS_CPU_MODEL=i386_fp - -# This is the actual bsp directory used during the build process. -RTEMS_BSP_FAMILY=force386 - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = - -# optimize flag: typically -0, could use -O4 or -fast -# -O4 is ok for RTEMS -# -fomit-frame-pointer breaks debugging and C++ exceptions -CFLAGS_OPTIMIZE_V=-O4 - -# This section makes the target dependent options file. - -# NDEBUG (C library) -# if defined asserts do not generate code. This is commonly used -# as a command line option. -# -# RTEMS_TEST_NO_PAUSE (RTEMS tests) -# do not pause between screens of output in the rtems tests -# -# RTEMS_DEBUG (RTEMS) -# If defined, debug checks in RTEMS and support library code are enabled. - -define make-target-options - @echo "/* #define NDEBUG 1 */ " >>$@ - @echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@ - @echo "/* #define RTEMS_DEBUG 1 */" >>$@ -endef - -# Here is the rule to actually build a $(ARCH)/foo.exe -# It also builds $(ARCH)/foo.sr and $(ARCH)/foo.nm -# Usage ref: src/tests/sptest/sp1/Makefile - -# The following are definitions of make-exe which will work using ld as -# is currently required. It is expected that as of gcc 2.8, the end user -# will be able to override parts of the compilers specs and link using gcc. - -ifeq ($(RTEMS_USE_GCC272),yes) -define make-exe - $(LD) $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).nxe \ - $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group - $(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i - $(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \ - $(PACKHEX) > $(basename $@).exe - $(NM) -g -n $(basename $@).nxe > $(basename $@).num - $(SIZE) $(basename $@).nxe -endef -else -define make-exe - $(CC) $(CPPFLAGS) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).nxe \ - $(LINK_OBJS) $(LINK_LIBS) - $(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i - $(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \ - $(PACKHEX) > $(basename $@).exe - $(NM) -g -n $(basename $@).nxe > $(basename $@).num - $(SIZE) $(basename $@).nxe -endef -endif - -# Miscellaneous additions go here - diff --git a/make/custom/go32.cfg b/make/custom/go32.cfg deleted file mode 100644 index 16e1caa5ff..0000000000 --- a/make/custom/go32.cfg +++ /dev/null @@ -1,110 +0,0 @@ -# -# Config file for the go32 BSP .. CPU model defaults to an i486DX -# unless set otherwise by a custom configuration file which overrides. -# -# $Id$ -# - -# default to i486dx as cpu -ifeq ($(RTEMS_GO32_CPU_MODEL),) -TARGET_ARCH=o-go32 -RTEMS_CPU_MODEL=i486dx -else -ifeq ($(RTEMS_GO32_CPU_MODEL),pentium) -TARGET_ARCH=o-go32_p5 -RTEMS_CPU_MODEL=pentium -endif # pentium -endif # i486dx - -include $(RTEMS_ROOT)/make/custom/default.cfg - -# Sharing a single bsp among multiple cpu models results in us having to -# explicitly set some values normally taken care of in the defaults.cfg -# file. - -RTEMS_CPU=i386 - -# This is the actual bsp directory used during the build process. -RTEMS_BSP_FAMILY=go32 - -## Target compiler config file, if any -CONFIG.$(TARGET_ARCH).CC = $(RTEMS_ROOT)/make/compilers/gcc-target-default.cfg - -# We may install in a CPU model based directory but this is still -# a go32 based bsp. -RTEMS_BSP=go32 - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -# NOTE: As gcc grows to include more options, this section should also grow. -# -ifeq ($(RTEMS_CPU_MODEL),i486dx) -CPU_CFLAGS = -m486 -else -ifeq ($(RTEMS_CPU_MODEL),pentium) -CPU_CFLAGS = -m486 -else -CPU_CFLAGS = -endif # pentium -endif # i486dx - -# optimize flag: typically -0, could use -O4 or -fast -# -O4 is ok for RTEMS -# -fomit-frame-pointer breaks debugging and C++ exceptions -CFLAGS_OPTIMIZE_V=-O4 - -# Base name of start file -# go32 does not use the rtems start file -START_BASE= - -# This section makes the target dependent options file. - -# NDEBUG (C library) -# if defined asserts do not generate code. This is commonly used -# as a command line option. -# -# RTEMS_TEST_NO_PAUSE (RTEMS tests) -# do not pause between screens of output in the rtems tests -# -# RTEMS_DEBUG (RTEMS) -# If defined, debug checks in RTEMS and support library code are enabled. - -define make-target-options - @echo "/* #define NDEBUG 1 */ " >>$@ - @echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@ - @echo "/* #define RTEMS_DEBUG 1 */" >>$@ -endef - -# Ultimately, it would be nice to do this when in a cross environment: -# $(COFF2EXE) $(basename $@).out - -# The following are definitions of make-exe which will work using ld as -# is currently required. It is expected that as of gcc 2.8, the end user -# will be able to override parts of the compilers specs and link using gcc. - -# may need to reference libpc.a - -ifeq ($(RTEMS_USE_GCC272),yes) -define make-exe - $(LD) $(LDFLAGS) -N -o $(basename $@).exe \ - $(shell $(CC) $(CPU_CFLAGS) -print-file-name=crt0.o) \ - $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group \ - $(shell $(CC) $(CPU_CFLAGS) -print-file-name=libcgo32.a $(GCCSED)) \ - $(shell $(CC) $(CPU_CFLAGS) -print-file-name=libpc.a $(GCCSED)) - $(NM) -g -n $(basename $@).exe > $(basename $@).num - $(SIZE) $(basename $@).exe -endef - -else -define make-exe - $(CC) $(CPPFLAGS) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).exe \ - $(LINK_OBJS) $(LINK_LIBS) - $(NM) -g -n $(basename $@).exe > $(basename $@).num - $(SIZE) $(basename $@).exe -endef - -endif - - -# Miscellaneous additions go here diff --git a/make/custom/go32_p5.cfg b/make/custom/go32_p5.cfg deleted file mode 100644 index 45668dfaa4..0000000000 --- a/make/custom/go32_p5.cfg +++ /dev/null @@ -1,15 +0,0 @@ -# -# Configuration file for a Pentium using the go32 BSP -# -# $Id$ -# - -# -# All go32 configurations share the same base file, only the cpu model -# differs. -# - -RTEMS_GO32_CPU_MODEL=pentium - -include $(RTEMS_ROOT)/make/custom/go32.cfg - |