summaryrefslogtreecommitdiffstats
path: root/make/custom
diff options
context:
space:
mode:
authorJoel Sherrill <joel.sherrill@OARcorp.com>1999-10-05 18:39:56 +0000
committerJoel Sherrill <joel.sherrill@OARcorp.com>1999-10-05 18:39:56 +0000
commit977623bbb1b801b77589dc85bb28121364858654 (patch)
treef37ed048301c480abb9615bb013c8b38261edb05 /make/custom
parentModified to remove reference to Force CPU386. Actually this was a misnamed (diff)
downloadrtems-977623bbb1b801b77589dc85bb28121364858654.tar.bz2
Removed targets and configurations that are no longer functional
and not likely to become so. Comments on each configuration are below. + Force CPU386 - This BSP was developed as part of the initial port of RTEMS to the i386. This board has been unavailable for a long time now. + GO32 - This BSP and some CPU code supported djgpp v1.x. This version is now quite old. No one has stepped forward to update the code to v2.x which may be technically impossible anyway. More importantly, go32 has been superceded by the pc386 BSP.
Diffstat (limited to 'make/custom')
-rw-r--r--make/custom/force386.cfg74
-rw-r--r--make/custom/go32.cfg110
-rw-r--r--make/custom/go32_p5.cfg15
3 files changed, 0 insertions, 199 deletions
diff --git a/make/custom/force386.cfg b/make/custom/force386.cfg
deleted file mode 100644
index 33d790a117..0000000000
--- a/make/custom/force386.cfg
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-# Config file for the force386 BSP
-#
-# $Id$
-#
-
-include $(RTEMS_ROOT)/make/custom/default.cfg
-
-RTEMS_CPU=i386
-RTEMS_CPU_MODEL=i386_fp
-
-# This is the actual bsp directory used during the build process.
-RTEMS_BSP_FAMILY=force386
-
-# This contains the compiler options necessary to select the CPU model
-# and (hopefully) optimize for it.
-#
-CPU_CFLAGS =
-
-# optimize flag: typically -0, could use -O4 or -fast
-# -O4 is ok for RTEMS
-# -fomit-frame-pointer breaks debugging and C++ exceptions
-CFLAGS_OPTIMIZE_V=-O4
-
-# This section makes the target dependent options file.
-
-# NDEBUG (C library)
-# if defined asserts do not generate code. This is commonly used
-# as a command line option.
-#
-# RTEMS_TEST_NO_PAUSE (RTEMS tests)
-# do not pause between screens of output in the rtems tests
-#
-# RTEMS_DEBUG (RTEMS)
-# If defined, debug checks in RTEMS and support library code are enabled.
-
-define make-target-options
- @echo "/* #define NDEBUG 1 */ " >>$@
- @echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@
- @echo "/* #define RTEMS_DEBUG 1 */" >>$@
-endef
-
-# Here is the rule to actually build a $(ARCH)/foo.exe
-# It also builds $(ARCH)/foo.sr and $(ARCH)/foo.nm
-# Usage ref: src/tests/sptest/sp1/Makefile
-
-# The following are definitions of make-exe which will work using ld as
-# is currently required. It is expected that as of gcc 2.8, the end user
-# will be able to override parts of the compilers specs and link using gcc.
-
-ifeq ($(RTEMS_USE_GCC272),yes)
-define make-exe
- $(LD) $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).nxe \
- $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
- $(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i
- $(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \
- $(PACKHEX) > $(basename $@).exe
- $(NM) -g -n $(basename $@).nxe > $(basename $@).num
- $(SIZE) $(basename $@).nxe
-endef
-else
-define make-exe
- $(CC) $(CPPFLAGS) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).nxe \
- $(LINK_OBJS) $(LINK_LIBS)
- $(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i
- $(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \
- $(PACKHEX) > $(basename $@).exe
- $(NM) -g -n $(basename $@).nxe > $(basename $@).num
- $(SIZE) $(basename $@).nxe
-endef
-endif
-
-# Miscellaneous additions go here
-
diff --git a/make/custom/go32.cfg b/make/custom/go32.cfg
deleted file mode 100644
index 16e1caa5ff..0000000000
--- a/make/custom/go32.cfg
+++ /dev/null
@@ -1,110 +0,0 @@
-#
-# Config file for the go32 BSP .. CPU model defaults to an i486DX
-# unless set otherwise by a custom configuration file which overrides.
-#
-# $Id$
-#
-
-# default to i486dx as cpu
-ifeq ($(RTEMS_GO32_CPU_MODEL),)
-TARGET_ARCH=o-go32
-RTEMS_CPU_MODEL=i486dx
-else
-ifeq ($(RTEMS_GO32_CPU_MODEL),pentium)
-TARGET_ARCH=o-go32_p5
-RTEMS_CPU_MODEL=pentium
-endif # pentium
-endif # i486dx
-
-include $(RTEMS_ROOT)/make/custom/default.cfg
-
-# Sharing a single bsp among multiple cpu models results in us having to
-# explicitly set some values normally taken care of in the defaults.cfg
-# file.
-
-RTEMS_CPU=i386
-
-# This is the actual bsp directory used during the build process.
-RTEMS_BSP_FAMILY=go32
-
-## Target compiler config file, if any
-CONFIG.$(TARGET_ARCH).CC = $(RTEMS_ROOT)/make/compilers/gcc-target-default.cfg
-
-# We may install in a CPU model based directory but this is still
-# a go32 based bsp.
-RTEMS_BSP=go32
-
-# This contains the compiler options necessary to select the CPU model
-# and (hopefully) optimize for it.
-#
-# NOTE: As gcc grows to include more options, this section should also grow.
-#
-ifeq ($(RTEMS_CPU_MODEL),i486dx)
-CPU_CFLAGS = -m486
-else
-ifeq ($(RTEMS_CPU_MODEL),pentium)
-CPU_CFLAGS = -m486
-else
-CPU_CFLAGS =
-endif # pentium
-endif # i486dx
-
-# optimize flag: typically -0, could use -O4 or -fast
-# -O4 is ok for RTEMS
-# -fomit-frame-pointer breaks debugging and C++ exceptions
-CFLAGS_OPTIMIZE_V=-O4
-
-# Base name of start file
-# go32 does not use the rtems start file
-START_BASE=
-
-# This section makes the target dependent options file.
-
-# NDEBUG (C library)
-# if defined asserts do not generate code. This is commonly used
-# as a command line option.
-#
-# RTEMS_TEST_NO_PAUSE (RTEMS tests)
-# do not pause between screens of output in the rtems tests
-#
-# RTEMS_DEBUG (RTEMS)
-# If defined, debug checks in RTEMS and support library code are enabled.
-
-define make-target-options
- @echo "/* #define NDEBUG 1 */ " >>$@
- @echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@
- @echo "/* #define RTEMS_DEBUG 1 */" >>$@
-endef
-
-# Ultimately, it would be nice to do this when in a cross environment:
-# $(COFF2EXE) $(basename $@).out
-
-# The following are definitions of make-exe which will work using ld as
-# is currently required. It is expected that as of gcc 2.8, the end user
-# will be able to override parts of the compilers specs and link using gcc.
-
-# may need to reference libpc.a
-
-ifeq ($(RTEMS_USE_GCC272),yes)
-define make-exe
- $(LD) $(LDFLAGS) -N -o $(basename $@).exe \
- $(shell $(CC) $(CPU_CFLAGS) -print-file-name=crt0.o) \
- $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group \
- $(shell $(CC) $(CPU_CFLAGS) -print-file-name=libcgo32.a $(GCCSED)) \
- $(shell $(CC) $(CPU_CFLAGS) -print-file-name=libpc.a $(GCCSED))
- $(NM) -g -n $(basename $@).exe > $(basename $@).num
- $(SIZE) $(basename $@).exe
-endef
-
-else
-define make-exe
- $(CC) $(CPPFLAGS) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).exe \
- $(LINK_OBJS) $(LINK_LIBS)
- $(NM) -g -n $(basename $@).exe > $(basename $@).num
- $(SIZE) $(basename $@).exe
-endef
-
-endif
-
-
-# Miscellaneous additions go here
diff --git a/make/custom/go32_p5.cfg b/make/custom/go32_p5.cfg
deleted file mode 100644
index 45668dfaa4..0000000000
--- a/make/custom/go32_p5.cfg
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Configuration file for a Pentium using the go32 BSP
-#
-# $Id$
-#
-
-#
-# All go32 configurations share the same base file, only the cpu model
-# differs.
-#
-
-RTEMS_GO32_CPU_MODEL=pentium
-
-include $(RTEMS_ROOT)/make/custom/go32.cfg
-