diff options
Diffstat (limited to 'make/custom/dmv177.cfg')
| -rw-r--r-- | make/custom/dmv177.cfg | 117 |
1 files changed, 0 insertions, 117 deletions
diff --git a/make/custom/dmv177.cfg b/make/custom/dmv177.cfg deleted file mode 100644 index 006f81968b..0000000000 --- a/make/custom/dmv177.cfg +++ /dev/null @@ -1,117 +0,0 @@ -# -# Config file for a PowerPC 603e based DY-4 VMEbus Single Board Computer. -# This BSP should work with the following models: -# -# + SVME-171/DMV-171 -# + SVME-176/DMV-176 -# -# $Id$ -# - -include $(RTEMS_ROOT)/make/custom/default.cfg - -RTEMS_CPU=powerpc -RTEMS_CPU_MODEL=ppc603e - -# This is the actual bsp directory used during the build process. -RTEMS_BSP_FAMILY=dmv177 - -# This section makes the target dependent options file. - -# NDEBUG (C library) -# if defined asserts do not generate code. This is commonly used -# as a command line option. -# -# RTEMS_TEST_NO_PAUSE (RTEMS tests) -# do not pause between screens of output in the rtems tests -# -# RTEMS_DEBUG (RTEMS) -# If defined, debug checks in RTEMS and support library code are enabled. -# -# CONSOLE_USE_POLLED (psim_bsp) -# CONSOLE_USE_INTERRUPTS (psim_bsp) -# The psim console driver has the structure to operate in either -# polled or interrupt mode. However both modes only trap to the -# monitor currently. -# -# PPC_VECTOR_FILE_BASE (ppc) -# This defines the base address of the exception table. -# NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100 -# -# PPC_ABI (ppc) -# This defines the calling convention (Application Binary Interface) -# used in this configuration. EABI is the only one supported. -# -# PPC_ASM (ppc) -# This defines the assembly language format used in this configuration. -# ELF is the only one supported. -# -# PPC_USE_SPRG (RTEMS PowerPC port) -# If defined, then the PowerPC specific code in RTEMS will use some -# of the special purpose registers to slightly optimize interrupt -# response time. The use of these registers can conflict with -# other tools like debuggers. -# -# PPC_USE_DATA_CACHE (RTEMS PowerPC port) -# If defined, then the PowerPC specific code in RTEMS will use -# data cache instructions to optimize the context switch code. -# This code can conflict with debuggers or emulators. - -define make-target-options - @echo "/* #define NDEBUG 1 */ " >>$@ - @echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@ - @echo "/* #define RTEMS_DEBUG 1 */" >>$@ - @echo "#define CONSOLE_USE_INTERRUPTS 0" >>$@ - @echo "#define CONSOLE_USE_POLLED ~CONSOLE_USE_INTERRUPTS" >>$@ - @echo "#define PPC_VECTOR_FILE_BASE 0x0100" >>$@ - @echo "#define PPC_ABI PPC_ABI_EABI" >>$@ - @echo "#define PPC_ASM PPC_ASM_ELF" >>$@ - @echo "#define PPC_USE_SPRG 0" >>$@ - @echo "#define PPC_USE_DATA_CACHE 0" >>$@ -endef - -# This contains the compiler options necessary to select the CPU model -# and (hopefully) optimize for it. -# -CPU_CFLAGS = -mcpu=603 - -# optimize flag: typically -0, could use -O4 or -fast -# -O4 is ok for RTEMS -# NOTE: some level of -O may be actually required by inline assembler -CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions - -# Define this to yes if this target supports multiprocessor environments. -HAS_MP=no - -# Define this to yes if this target supports a real-time clock. -HAS_RTC=yes - -# The following is a ld command file which works without using the -# -specs system in gcc 2.8. IT HAS NEVER BEEN TESTED WITH THIS BSP!!! -# $(LD) $(XLDFLAGS) -T $(LINKCMDS) \ -# -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES) -# $(LD) $(XLDFLAGS) -Ttext 0x20000 \ -# -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES) - -# $(CC) -mmvme -mrtems -nostartfiles -mcpu=603 \ -# -o $(basename $@).exe -L $(PROJECT_RELEASE)/lib \ -# $(START_FILE) $(LINK_OBJS) \ -# $(LD_LIBS) \ -# -Wl,-\( -Wl,-lc -Wl,-lrtemsall -Wl,-lgcc -Wl,-\) -define make-exe - $(CC) $(CFLAGS) -o $(basename $@).nxe $(LINK_OBJS) $(LINK_LIBS) - $(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i - $(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \ - $(PROJECT_TOOLS)/packhex > $(basename $@).exe - $(NM) -g -n $(basename $@).nxe > $(basename $@).num - $(SIZE) $(basename $@).nxe - $(STRIP) $(basename $@).nxe -endef - -# Miscellaneous additions go here - -# No start file -START_BASE= - -# Let the HWAPI know which set of drivers to build -DRIVER_ARCHITECTURE=vmebus |