diff options
Diffstat (limited to 'doc/tools/pdl2texi/t1.d')
-rw-r--r-- | doc/tools/pdl2texi/t1.d | 52 |
1 files changed, 0 insertions, 52 deletions
diff --git a/doc/tools/pdl2texi/t1.d b/doc/tools/pdl2texi/t1.d deleted file mode 100644 index 4f54e74738..0000000000 --- a/doc/tools/pdl2texi/t1.d +++ /dev/null @@ -1,52 +0,0 @@ -OBJECT: Drive - DESCRIPTION: - This object provides an interface to the elevation/azimuth - drive system(ECA). - THEORY OF OPERATION: - This object encapsulates the turret drive. The object provides - an interface to control the turret drive. A method is provided - to set the azimuth and elevation rate of the drive. Methods are - provided to request the drive to run in stabilized or power mode - and set the drive speed to high or low. A method is also provided - to allow for drift adjust. - - This object also tracks drive system on hours. It gets the hours - from the EEPROM data, allows the hours to be set, updates the - hours via the activation and deactivation of the drive, and - provides access to the hours. - - The object also provides methods to access azimuth and elevation - displacement, and methods to process changes in the hardware - discretes drive on, stabilized mode, thermal fault and fault. - - The object also provides methods to enable and disable - both the remote and turret power interlocks which determine if - the drive can be driven by the remote or turret handstation - respectively. - -ATTRIBUTE DESCRIPTIONS: - - -ATTRIBUTE: Azimuth_displacement - DESCRIPTION: - This attribute represents the current azimuth displacement - of the turret. - TYPE: float constant - RANGE: 0-0 - UNITS: degrees - REQUIREMENTS: - AFS 8.2.11 Receive Azimuth Displacement and Elevation Displacement - AIS 5.2.6 Azimuth Displacement analog - - -ASSOCIATION DESCRIPTIONS: none - -ABSTRACT TYPE DESCRIPTIONS: none - -DATA ITEM DESCRIPTIONS: none - -METHOD DESCRIPTIONS: none - -TASK DESCRIPTIONS: none - -END OBJECT: Drive |