diff options
Diffstat (limited to 'doc/bsp_howto/clock.t')
-rw-r--r-- | doc/bsp_howto/clock.t | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/doc/bsp_howto/clock.t b/doc/bsp_howto/clock.t index ee80ed228b..24a6812d4c 100644 --- a/doc/bsp_howto/clock.t +++ b/doc/bsp_howto/clock.t @@ -59,9 +59,9 @@ used as the source of the clock tick. The device should be programmed such that an interrupt is generated every @i{m} microseconds, where @i{m} is equal to -@code{BSP_Configuration.microseconds_per_tick}. Sometimes the periodic interval -timer can use a prescaler so you have to look carefully at your user's -manual to determine the correct value. +@code{rtems_configuration_get_microseconds_per_tick()}. Sometimes +the periodic interval timer can use a prescaler so you have to look +carefully at your user's manual to determine the correct value. You must use the RTEMS primitive @code{rtems_interrupt_catch} to install your clock interrupt service routine: |