1 files changed, 0 insertions, 46 deletions
diff --git a/doc/bsp_howto/clock.t b/doc/bsp_howto/clock.t
deleted file mode 100644
index 918f6331b2..0000000000
--- a/doc/bsp_howto/clock.t
+++ /dev/null
@@ -1,46 +0,0 @@
-@c
-@c  COPYRIGHT (c) 1988-1998.
-@c  On-Line Applications Research Corporation (OAR).
-@c  All rights reserved.
-@c
-@c  $Id$
-@c
-
-@chapter Clock Driver
-
-@section Introduction
-
-The clock driver aims at giving a steady time basis to the kernel, so that
-the RTEMS primitives that need a clock tick work properly. <insert a link
-to the Clock Driver defs>
-
-The clock driver is located in the clock directory of the BSP. 
-
-@section Primitives
-
-@subsection Initialization
-
-The major and minor numbers of the clock driver can be made available to
-the others, such as the Shared Memory Driver. 
-
-Then you have to program your integrated processor periodic interval timer
-so that an interrupt is generated every m microseconds, where m =
-BSP_Configuration.microseconds_per_tick. Sometimes the periodic interval
-timer can use a prescaler so you have to look carefully at your user's
-manual to determine the correct value. 
-
-You must use the RTEMS primitive to put your clock interrupt routine in
-the VBR: 
-
-@example
-rtems_interrupt_catch (InterruptHandler, CONSOLE_VECTOR, &old_handler); 
-@end example
-
-@subsection The Clock Interrupt Subroutine
-
-It only has to inform the kernel that a ticker has elapsed, so call : 
-
-@example
-rtems_clock_tick(); 
-@end example
-