1 files changed, 0 insertions, 134 deletions
diff --git a/cpukit/score/cpu/m32c/rtems/score/cpu.h b/cpukit/score/cpu/m32c/rtems/score/cpu.h
index de0ead55f4..f980abc256 100644
--- a/cpukit/score/cpu/m32c/rtems/score/cpu.h
+++ b/cpukit/score/cpu/m32c/rtems/score/cpu.h
@@ -869,144 +869,10 @@ void _CPU_Context_Restart_self(
 
 /* end of Fatal Error manager macros */
 
-/* Bitfield handler macros */
-
-/**
- * @defgroup CPUBitfield Processor Dependent Bitfield Manipulation
- *
- * This set of routines are used to implement fast searches for
- * the most important ready task.
- */
-/**@{**/
-
-/**
- * This definition is set to TRUE if the port uses the generic bitfield
- * manipulation implementation.
- */
 #define CPU_USE_GENERIC_BITFIELD_CODE TRUE
 
-/**
- * This definition is set to TRUE if the port uses the data tables provided
- * by the generic bitfield manipulation implementation.
- * This can occur when actually using the generic bitfield manipulation
- * implementation or when implementing the same algorithm in assembly
- * language for improved performance.  It is unlikely that a port will use
- * the data if it has a bitfield scan instruction.
- */
 #define CPU_USE_GENERIC_BITFIELD_DATA TRUE
 
-/**
- * This routine sets @a _output to the bit number of the first bit
- * set in @a _value.  @a _value is of CPU dependent type
- * @a Priority_bit_map_Word.  This type may be either 16 or 32 bits
- * wide although only the 16 least significant bits will be used.
- *
- * There are a number of variables in using a "find first bit" type
- * instruction.
- *
- *   -# What happens when run on a value of zero?
- *   -# Bits may be numbered from MSB to LSB or vice-versa.
- *   -# The numbering may be zero or one based.
- *   -# The "find first bit" instruction may search from MSB or LSB.
- *
- * RTEMS guarantees that (1) will never happen so it is not a concern.
- * (2),(3), (4) are handled by the macros @ref _CPU_Priority_Mask and
- * @ref _CPU_Priority_bits_index.  These three form a set of routines
- * which must logically operate together.  Bits in the _value are
- * set and cleared based on masks built by @ref _CPU_Priority_Mask.
- * The basic major and minor values calculated by @ref _Priority_Major
- * and @ref _Priority_Minor are "massaged" by @ref _CPU_Priority_bits_index
- * to properly range between the values returned by the "find first bit"
- * instruction.  This makes it possible for @ref _Priority_Get_highest to
- * calculate the major and directly index into the minor table.
- * This mapping is necessary to ensure that 0 (a high priority major/minor)
- * is the first bit found.
- *
- * This entire "find first bit" and mapping process depends heavily
- * on the manner in which a priority is broken into a major and minor
- * components with the major being the 4 MSB of a priority and minor
- * the 4 LSB.  Thus (0 << 4) + 0 corresponds to priority 0 -- the highest
- * priority.  And (15 << 4) + 14 corresponds to priority 254 -- the next
- * to the lowest priority.
- *
- * If your CPU does not have a "find first bit" instruction, then
- * there are ways to make do without it.  Here are a handful of ways
- * to implement this in software:
- *
-@verbatim
-      - a series of 16 bit test instructions
-      - a "binary search using if's"
-      - _number = 0
-        if _value > 0x00ff
-          _value >>=8
-          _number = 8;
-
-        if _value > 0x0000f
-          _value >=8
-          _number += 4
-
-        _number += bit_set_table[ _value ]
-@endverbatim
-
- *   where bit_set_table[ 16 ] has values which indicate the first
- *     bit set
- *
- * @param[in] _value is the value to be scanned
- * @param[in] _output is the first bit set
- *
- * Port Specific Information:
- *
- * XXX document implementation including references if appropriate
- */
-
-#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE)
-#define _CPU_Bitfield_Find_first_bit( _value, _output ) \
-  { \
-    (_output) = 0;   /* do something to prevent warnings */ \
-  }
-#endif
-
-/* end of Bitfield handler macros */
-
-/**
- * This routine builds the mask which corresponds to the bit fields
- * as searched by @ref _CPU_Bitfield_Find_first_bit.  See the discussion
- * for that routine.
- *
- * Port Specific Information:
- *
- * XXX document implementation including references if appropriate
- */
-#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE)
-
-#define _CPU_Priority_Mask( _bit_number ) \
-  ( 1 << (_bit_number) )
-
-#endif
-
-/**
- * This routine translates the bit numbers returned by
- * @ref _CPU_Bitfield_Find_first_bit into something suitable for use as
- * a major or minor component of a priority.  See the discussion
- * for that routine.
- *
- * @param[in] _priority is the major or minor number to translate
- *
- * Port Specific Information:
- *
- * XXX document implementation including references if appropriate
- */
-#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE)
-
-#define _CPU_Priority_bits_index( _priority ) \
-  (_priority)
-
-#endif
-
-/** @} */
-
-/* end of Priority handler macros */
-
 /* functions */
 
 /**