diff options
Diffstat (limited to 'cpukit/score/cpu/lm32/rtems/score/cpu.h')
| -rw-r--r-- | cpukit/score/cpu/lm32/rtems/score/cpu.h | 1035 |
1 files changed, 0 insertions, 1035 deletions
diff --git a/cpukit/score/cpu/lm32/rtems/score/cpu.h b/cpukit/score/cpu/lm32/rtems/score/cpu.h deleted file mode 100644 index 9d229948aa..0000000000 --- a/cpukit/score/cpu/lm32/rtems/score/cpu.h +++ /dev/null @@ -1,1035 +0,0 @@ -/** - * @file - * - * @brief LM32 CPU Department Source - * - * This include file contains information pertaining to the LM32 - * processor. - */ - -/* - * COPYRIGHT (c) 1989-2008. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef _RTEMS_SCORE_CPU_H -#define _RTEMS_SCORE_CPU_H - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/types.h> -#include <rtems/score/lm32.h> - -/* conditional compilation parameters */ - -/** - * Does RTEMS manage a dedicated interrupt stack in software? - * - * If TRUE, then a stack is allocated in @ref _ISR_Handler_initialization. - * If FALSE, nothing is done. - * - * If the CPU supports a dedicated interrupt stack in hardware, - * then it is generally the responsibility of the BSP to allocate it - * and set it up. - * - * If the CPU does not support a dedicated interrupt stack, then - * the porter has two options: (1) execute interrupts on the - * stack of the interrupted task, and (2) have RTEMS manage a dedicated - * interrupt stack. - * - * If this is TRUE, @ref CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * @ref CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK TRUE - -/** - * Does the CPU follow the simple vectored interrupt model? - * - * If TRUE, then RTEMS allocates the vector table it internally manages. - * If FALSE, then the BSP is assumed to allocate and manage the vector - * table - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_SIMPLE_VECTORED_INTERRUPTS TRUE - -/** - * Does this CPU have hardware support for a dedicated interrupt stack? - * - * If TRUE, then it must be installed during initialization. - * If FALSE, then no installation is performed. - * - * If this is TRUE, @ref CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * @ref CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_HAS_HARDWARE_INTERRUPT_STACK FALSE - -/** - * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? - * - * If TRUE, then the memory is allocated during initialization. - * If FALSE, then the memory is allocated during initialization. - * - * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_ALLOCATE_INTERRUPT_STACK TRUE - -/** - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_ISR_PASSES_FRAME_POINTER TRUE - -/** - * @def CPU_HARDWARE_FP - * - * Does the CPU have hardware floating point? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. - * - * If there is a FP coprocessor such as the i387 or mc68881, then - * the answer is TRUE. - * - * The macro name "NO_CPU_HAS_FPU" should be made CPU specific. - * It indicates whether or not this CPU model has FP support. For - * example, it would be possible to have an i386_nofp CPU model - * which set this to false to indicate that you have an i386 without - * an i387 and wish to leave floating point support out of RTEMS. - */ - -/** - * @def CPU_SOFTWARE_FP - * - * Does the CPU have no hardware floating point and GCC provides a - * software floating point implementation which must be context - * switched? - * - * This feature conditional is used to indicate whether or not there - * is software implemented floating point that must be context - * switched. The determination of whether or not this applies - * is very tool specific and the state saved/restored is also - * compiler specific. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_HARDWARE_FP FALSE -#define CPU_SOFTWARE_FP FALSE - -/** - * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. - * - * So far, the only CPUs in which this option has been used are the - * HP PA-RISC and PowerPC. On the PA-RISC, The HP C compiler and - * gcc both implicitly used the floating point registers to perform - * integer multiplies. Similarly, the PowerPC port of gcc has been - * seen to allocate floating point local variables and touch the FPU - * even when the flow through a subroutine (like vfprintf()) might - * not use floating point formats. - * - * If a function which you would not think utilize the FP unit DOES, - * then one can not easily predict which tasks will use the FP hardware. - * In this case, this option should be TRUE. - * - * If @ref CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_ALL_TASKS_ARE_FP FALSE - -/** - * Should the IDLE task have a floating point context? - * - * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. - * - * Setting this to TRUE negatively impacts the time required to preempt - * the IDLE task from an interrupt because the floating point context - * must be saved as part of the preemption. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_IDLE_TASK_IS_FP FALSE - -/** - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? - * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. - * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. - * - * If the floating point context does NOT have to be saved as part of - * interrupt dispatching, then it should be safe to set this to TRUE. - * - * Setting this flag to TRUE results in using a different algorithm - * for deciding when to save and restore the floating point context. - * The deferred FP switch algorithm minimizes the number of times - * the FP context is saved and restored. The FP context is not saved - * until a context switch is made to another, different FP task. - * Thus in a system with only one FP task, the FP context will never - * be saved or restored. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -#define CPU_ENABLE_ROBUST_THREAD_DISPATCH FALSE - -/** - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine @ref _CPU_Thread_Idle_body - * must be provided and is the default IDLE thread body instead of - * @ref _CPU_Thread_Idle_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - * - * This is intended to allow for supporting processors which have - * a low power or idle mode. When the IDLE thread is executed, then - * the CPU can be powered down. - * - * The order of precedence for selecting the IDLE thread body is: - * - * -# BSP provided - * -# CPU dependent (if provided) - * -# generic (if no BSP and no CPU dependent) - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_PROVIDES_IDLE_THREAD_BODY TRUE - -/** - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? - * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_STACK_GROWS_UP FALSE - -/* L2 cache lines are 32 bytes in Milkymist SoC */ -#define CPU_CACHE_LINE_BYTES 32 - -#define CPU_STRUCTURE_ALIGNMENT RTEMS_ALIGNED( CPU_CACHE_LINE_BYTES ) - -/** - * @ingroup CPUInterrupt - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine @ref _CPU_ISR_Set_level. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_MODES_INTERRUPT_MASK 0x00000001 - -#define CPU_MAXIMUM_PROCESSORS 32 - -/* - * Processor defined structures required for cpukit/score. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ - -/* may need to put some structures here. */ - -/** - * @defgroup CPUContext Processor Dependent Context Management - * - * From the highest level viewpoint, there are 2 types of context to save. - * - * -# Interrupt registers to save - * -# Task level registers to save - * - * Since RTEMS handles integer and floating point contexts separately, this - * means we have the following 3 context items: - * - * -# task level context stuff:: Context_Control - * -# floating point task stuff:: Context_Control_fp - * -# special interrupt level context :: CPU_Interrupt_frame - * - * On some processors, it is cost-effective to save only the callee - * preserved registers during a task context switch. This means - * that the ISR code needs to save those registers which do not - * persist across function calls. It is not mandatory to make this - * distinctions between the caller/callee saves registers for the - * purpose of minimizing context saved during task switch and on interrupts. - * If the cost of saving extra registers is minimal, simplicity is the - * choice. Save the same context on interrupt entry as for tasks in - * this case. - * - * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then - * care should be used in designing the context area. - * - * On some CPUs with hardware floating point support, the Context_Control_fp - * structure will not be used or it simply consist of an array of a - * fixed number of bytes. This is done when the floating point context - * is dumped by a "FP save context" type instruction and the format - * is not really defined by the CPU. In this case, there is no need - * to figure out the exact format -- only the size. Of course, although - * this is enough information for RTEMS, it is probably not enough for - * a debugger such as gdb. But that is another problem. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -/**@{**/ - -/** - * This defines the minimal set of integer and processor state registers - * that must be saved during a voluntary context switch from one thread - * to another. - */ -typedef struct { - uint32_t r11; - uint32_t r12; - uint32_t r13; - uint32_t r14; - uint32_t r15; - uint32_t r16; - uint32_t r17; - uint32_t r18; - uint32_t r19; - uint32_t r20; - uint32_t r21; - uint32_t r22; - uint32_t r23; - uint32_t r24; - uint32_t r25; - uint32_t gp; - uint32_t fp; - uint32_t sp; - uint32_t ra; - uint32_t ie; - uint32_t epc; -} Context_Control; - -/** - * - * This macro returns the stack pointer associated with @a _context. - * - * @param[in] _context is the thread context area to access - * - * @return This method returns the stack pointer. - */ -#define _CPU_Context_Get_SP( _context ) \ - (_context)->sp - -/** - * This defines the complete set of floating point registers that must - * be saved during any context switch from one thread to another. - */ -typedef struct { -} Context_Control_fp; - -/** - * This defines the set of integer and processor state registers that must - * be saved during an interrupt. This set does not include any which are - * in @ref Context_Control. - */ -typedef struct { - uint32_t r1; - uint32_t r2; - uint32_t r3; - uint32_t r4; - uint32_t r5; - uint32_t r6; - uint32_t r7; - uint32_t r8; - uint32_t r9; - uint32_t r10; - uint32_t ra; - uint32_t ba; - uint32_t ea; -} CPU_Interrupt_frame; - -/** - * This variable is optional. It is used on CPUs on which it is difficult - * to generate an "uninitialized" FP context. It is filled in by - * @ref _CPU_Initialize and copied into the task's FP context area during - * @ref _CPU_Context_Initialize. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#if 0 -extern Context_Control_fp _CPU_Null_fp_context; -#endif - -/** @} */ - -/** - * @defgroup CPUInterrupt Processor Dependent Interrupt Management - * - * On some CPUs, RTEMS supports a software managed interrupt stack. - * This stack is allocated by the Interrupt Manager and the switch - * is performed in @ref _ISR_Handler. These variables contain pointers - * to the lowest and highest addresses in the chunk of memory allocated - * for the interrupt stack. Since it is unknown whether the stack - * grows up or down (in general), this give the CPU dependent - * code the option of picking the version it wants to use. - * - * NOTE: These two variables are required if the macro - * @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -/**@{**/ - -/* - * Nothing prevents the porter from declaring more CPU specific variables. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ - -/* XXX: if needed, put more variables here */ - -/** - * @ingroup CPUContext - * The size of the floating point context area. On some CPUs this - * will not be a "sizeof" because the format of the floating point - * area is not defined -- only the size is. This is usually on - * CPUs with a "floating point save context" instruction. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/** - * Amount of extra stack (above minimum stack size) required by - * MPCI receive server thread. Remember that in a multiprocessor - * system this thread must exist and be able to process all directives. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 - -/** - * This defines the number of entries in the @ref _ISR_Vector_table managed - * by RTEMS. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 32 - -/** - * This defines the highest interrupt vector number for this port. - */ -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/** - * This is defined if the port has a special way to report the ISR nesting - * level. Most ports maintain the variable @a _ISR_Nest_level. - */ -#define CPU_PROVIDES_ISR_IS_IN_PROGRESS FALSE - -/** @} */ - -/** - * @ingroup CPUContext - * Should be large enough to run all RTEMS tests. This ensures - * that a "reasonable" small application should not have any problems. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_STACK_MINIMUM_SIZE (1024*4) - -#define CPU_SIZEOF_POINTER 4 - -/** - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. - * - * Port Specific Information: - * The LM32 architecture manual simply states: "All memory accesses must be - * aligned to the size of the access", and there is no hardware support - * whatsoever for 64-bit numbers. - * (lm32_archman.pdf, July 2009, p. 15) - */ -#define CPU_ALIGNMENT 4 - -/** - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by @ref CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * @ref CPU_ALIGNMENT. If the @ref CPU_ALIGNMENT is strict enough for - * the heap, then this should be set to @ref CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2 although it should be - * a multiple of 2 greater than or equal to 2. The requirement - * to be a multiple of 2 is because the heap uses the least - * significant field of the front and back flags to indicate - * that a block is in use or free. So you do not want any odd - * length blocks really putting length data in that bit. - * - * On byte oriented architectures, @ref CPU_HEAP_ALIGNMENT normally will - * have to be greater or equal to than @ref CPU_ALIGNMENT to ensure that - * elements allocated from the heap meet all restrictions. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT - -/** - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * @ref CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as @ref CPU_ALIGNMENT. If the @ref CPU_ALIGNMENT is - * strict enough for the partition, then this should be set to - * @ref CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than @ref CPU_ALIGNMENT. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/** - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by @ref CPU_ALIGNMENT. - * - * - * Port Specific Information: - * - * Stack is software-managed - */ -#define CPU_STACK_ALIGNMENT CPU_ALIGNMENT - -/* - * ISR handler macros - */ - -/** - * @addtogroup CPUInterrupt - */ -/**@{**/ - -/** - * Support routine to initialize the RTEMS vector table after it is allocated. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_Initialize_vectors() - -/** - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in @a _isr_cookie. - * - * @param[out] _isr_cookie will contain the previous level cookie - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_ISR_Disable( _isr_cookie ) \ - lm32_disable_interrupts( _isr_cookie ); - -/** - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * @a _isr_cookie is not modified. - * - * @param[in] _isr_cookie contain the previous level cookie - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_ISR_Enable( _isr_cookie ) \ - lm32_enable_interrupts( _isr_cookie ); - -/** - * This temporarily restores the interrupt to @a _isr_cookie before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter @a _isr_cookie is not - * modified. - * - * @param[in] _isr_cookie contain the previous level cookie - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_ISR_Flash( _isr_cookie ) \ - lm32_flash_interrupts( _isr_cookie ); - -RTEMS_INLINE_ROUTINE bool _CPU_ISR_Is_enabled( uint32_t level ) -{ - return ( level & 0x0001 ) != 0; -} - -/** - * This routine and @ref _CPU_ISR_Get_level - * Map the interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a generic fashion are undefined. Someday, - * it would be nice if these were "mapped" by the application - * via a callout. For example, m68k has 8 levels 0 - 7, levels - * 8 - 255 would be available for bsp/application specific meaning. - * This could be used to manage a programmable interrupt controller - * via the rtems_task_mode directive. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_ISR_Set_level( new_level ) \ - { \ - _CPU_ISR_Enable( ( new_level==0 ) ? 1 : 0 ); \ - } - -/** - * Return the current interrupt disable level for this task in - * the format used by the interrupt level portion of the task mode. - * - * NOTE: This routine usually must be implemented as a subroutine. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -uint32_t _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/** @} */ - -/* Context handler macros */ - -/** - * @ingroup CPUContext - * Initialize the context to a state suitable for starting a - * task after a context restore operation. Generally, this - * involves: - * - * - setting a starting address - * - preparing the stack - * - preparing the stack and frame pointers - * - setting the proper interrupt level in the context - * - initializing the floating point context - * - * This routine generally does not set any unnecessary register - * in the context. The state of the "general data" registers is - * undefined at task start time. - * - * @param[in] _the_context is the context structure to be initialized - * @param[in] _stack_base is the lowest physical address of this task's stack - * @param[in] _size is the size of this task's stack - * @param[in] _isr is the interrupt disable level - * @param[in] _entry_point is the thread's entry point. This is - * always @a _Thread_Handler - * @param[in] _is_fp is TRUE if the thread is to be a floating - * point thread. This is typically only used on CPUs where the - * FPU may be easily disabled by software such as on the SPARC - * where the PSR contains an enable FPU bit. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -extern char _gp[]; - -#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ - _isr, _entry_point, _is_fp, _tls_area ) \ - do { \ - uint32_t _stack = (uint32_t)(_stack_base) + (_size) - 4; \ - \ - (void) _is_fp; /* avoid warning for being unused */ \ - (void) _isr; /* avoid warning for being unused */ \ - (_the_context)->gp = (uint32_t)_gp; \ - (_the_context)->fp = (uint32_t)_stack; \ - (_the_context)->sp = (uint32_t)_stack; \ - (_the_context)->ra = (uint32_t)(_entry_point); \ - } while ( 0 ) - -/** - * This routine is responsible for somehow restarting the currently - * executing task. If you are lucky, then all that is necessary - * is restoring the context. Otherwise, there will need to be - * a special assembly routine which does something special in this - * case. For many ports, simply adding a label to the restore path - * of @ref _CPU_Context_switch will work. On other ports, it may be - * possibly to load a few arguments and jump to the restore path. It will - * not work if restarting self conflicts with the stack frame - * assumptions of restoring a context. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -/** - * This routine initializes the FP context area passed to it to. - * There are a few standard ways in which to initialize the - * floating point context. The code included for this macro assumes - * that this is a CPU in which a "initial" FP context was saved into - * @a _CPU_Null_fp_context and it simply copies it to the destination - * context passed to it. - * - * Other floating point context save/restore models include: - * -# not doing anything, and - * -# putting a "null FP status word" in the correct place in the FP context. - * - * @param[in] _destination is the floating point context area - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_Context_Initialize_fp( _destination ) -#if 0 - { \ - *(*(_destination)) = _CPU_Null_fp_context; \ - } -#endif - -/* end of Context handler macros */ - -/* Fatal Error manager macros */ - -/** - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * halts/stops the CPU. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define _CPU_Fatal_halt( _source, _error ) \ - { \ - } - -/* end of Fatal Error manager macros */ - -#define CPU_USE_GENERIC_BITFIELD_CODE TRUE - -/* functions */ - -/** - * This routine performs CPU dependent initialization. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Initialize(void); - -/** - * @addtogroup CPUInterrupt - */ -/**@{**/ - -/** - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - * - * @param[in] vector is the vector number - * @param[in] new_handler is the raw ISR handler to install - * @param[in] old_handler is the previously installed ISR Handler - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_ISR_install_raw_handler( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/** - * This routine installs an interrupt vector. - * - * @param[in] vector is the vector number - * @param[in] new_handler is the RTEMS ISR handler to install - * @param[in] old_handler is the previously installed ISR Handler - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_ISR_install_vector( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/** - * This routine installs the hardware interrupt stack pointer. - * - * NOTE: It need only be provided if @ref CPU_HAS_HARDWARE_INTERRUPT_STACK - * is TRUE. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Install_interrupt_stack( void ); - -/** @} */ - -/** - * This routine is the CPU dependent IDLE thread body. - * - * NOTE: It need only be provided if @ref CPU_PROVIDES_IDLE_THREAD_BODY - * is TRUE. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void *_CPU_Thread_Idle_body( uintptr_t ignored ); - -/** - * @ingroup CPUContext - * This routine switches from the run context to the heir context. - * - * @param[in] run points to the context of the currently executing task - * @param[in] heir points to the context of the heir task - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/** - * @addtogroup CPUContext - */ -/**@{**/ - -/** - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in @ref _CPU_Context_switch. - * - * @param[in] new_context points to the context to be restored. - * - * NOTE: May be unnecessary to reload some registers. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Context_restore( - Context_Control *new_context -) RTEMS_NO_RETURN; - -/** - * This routine saves the floating point context passed to it. - * - * @param[in] fp_context_ptr is a pointer to a pointer to a floating - * point context area - * - * @return on output @a *fp_context_ptr will contain the address that - * should be used with @ref _CPU_Context_restore_fp to restore this context. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Context_save_fp( - Context_Control_fp **fp_context_ptr -); - -/** - * This routine restores the floating point context passed to it. - * - * @param[in] fp_context_ptr is a pointer to a pointer to a floating - * point context area to restore - * - * @return on output @a *fp_context_ptr will contain the address that - * should be used with @ref _CPU_Context_save_fp to save this context. - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -void _CPU_Context_restore_fp( - Context_Control_fp **fp_context_ptr -); - -static inline void _CPU_Context_volatile_clobber( uintptr_t pattern ) -{ - /* TODO */ -} - -static inline void _CPU_Context_validate( uintptr_t pattern ) -{ - while (1) { - /* TODO */ - } -} - -/** @} */ - -/* FIXME */ -typedef CPU_Interrupt_frame CPU_Exception_frame; - -void _CPU_Exception_frame_print( const CPU_Exception_frame *frame ); - -/** - * @ingroup CPUEndian - * The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version will work on any processor, but if there is a better - * way for your CPU PLEASE use it. The most common way to do this is to: - * - * swap least significant two bytes with 16-bit rotate - * swap upper and lower 16-bits - * swap most significant two bytes with 16-bit rotate - * - * Some CPUs have special instructions which swap a 32-bit quantity in - * a single instruction (e.g. i486). It is probably best to avoid - * an "endian swapping control bit" in the CPU. One good reason is - * that interrupts would probably have to be disabled to ensure that - * an interrupt does not try to access the same "chunk" with the wrong - * endian. Another good reason is that on some CPUs, the endian bit - * endianness for ALL fetches -- both code and data -- so the code - * will be fetched incorrectly. - * - * @param[in] value is the value to be swapped - * @return the value after being endian swapped - * - * Port Specific Information: - * - * XXX document implementation including references if appropriate - */ -static inline uint32_t CPU_swap_u32( - uint32_t value -) -{ - uint32_t byte1, byte2, byte3, byte4, swapped; - - byte4 = (value >> 24) & 0xff; - byte3 = (value >> 16) & 0xff; - byte2 = (value >> 8) & 0xff; - byte1 = value & 0xff; - - swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4; - return swapped; -} - -/** - * @ingroup CPUEndian - * This routine swaps a 16 bir quantity. - * - * @param[in] value is the value to be swapped - * @return the value after being endian swapped - */ -static inline uint16_t CPU_swap_u16(uint16_t v) -{ - return v << 8 | v >> 8; -} - -typedef uint32_t CPU_Counter_ticks; - -CPU_Counter_ticks _CPU_Counter_read( void ); - -static inline CPU_Counter_ticks _CPU_Counter_difference( - CPU_Counter_ticks second, - CPU_Counter_ticks first -) -{ - return second - first; -} - -#ifdef __cplusplus -} -#endif - -#endif |