summaryrefslogtreecommitdiffstats
path: root/cpukit/dev
diff options
context:
space:
mode:
Diffstat (limited to 'cpukit/dev')
-rw-r--r--cpukit/dev/Makefile.am34
-rw-r--r--cpukit/dev/include/dev/i2c/eeprom.h58
-rw-r--r--cpukit/dev/include/dev/i2c/fpga-i2c-slave.h25
-rw-r--r--cpukit/dev/include/dev/i2c/gpio-nxp-pca9535.h123
-rw-r--r--cpukit/dev/include/dev/i2c/i2c.h432
-rw-r--r--cpukit/dev/include/dev/i2c/sensor-lm75a.h125
-rw-r--r--cpukit/dev/include/dev/i2c/switch-nxp-pca9548a.h68
-rw-r--r--cpukit/dev/include/dev/i2c/ti-ads-16bit-adc.h203
-rw-r--r--cpukit/dev/include/dev/i2c/ti-lm25066a.h190
-rw-r--r--cpukit/dev/include/dev/i2c/ti-tmp112.h109
-rw-r--r--cpukit/dev/include/dev/i2c/xilinx-axi-i2c.h86
-rw-r--r--cpukit/dev/include/dev/serial/sc16is752.h262
-rw-r--r--cpukit/dev/include/dev/spi/spi.h216
-rw-r--r--cpukit/dev/include/linux/i2c-dev.h137
-rw-r--r--cpukit/dev/include/linux/i2c.h275
-rw-r--r--cpukit/dev/include/linux/spi/spidev.h268
-rw-r--r--cpukit/dev/preinstall.am105
17 files changed, 0 insertions, 2716 deletions
diff --git a/cpukit/dev/Makefile.am b/cpukit/dev/Makefile.am
index b60e035fdb..f499bbb948 100644
--- a/cpukit/dev/Makefile.am
+++ b/cpukit/dev/Makefile.am
@@ -1,39 +1,6 @@
include $(top_srcdir)/automake/compile.am
include $(top_srcdir)/automake/multilib.am
-include_devdir = $(includedir)/dev
-include_dev_HEADERS =
-
-include_dev_i2cdir = $(includedir)/dev/i2c
-include_dev_i2c_HEADERS =
-include_dev_i2c_HEADERS += include/dev/i2c/eeprom.h
-include_dev_i2c_HEADERS += include/dev/i2c/fpga-i2c-slave.h
-include_dev_i2c_HEADERS += include/dev/i2c/gpio-nxp-pca9535.h
-include_dev_i2c_HEADERS += include/dev/i2c/i2c.h
-include_dev_i2c_HEADERS += include/dev/i2c/sensor-lm75a.h
-include_dev_i2c_HEADERS += include/dev/i2c/switch-nxp-pca9548a.h
-include_dev_i2c_HEADERS += include/dev/i2c/xilinx-axi-i2c.h
-include_dev_i2c_HEADERS += include/dev/i2c/ti-ads-16bit-adc.h
-include_dev_i2c_HEADERS += include/dev/i2c/ti-lm25066a.h
-include_dev_i2c_HEADERS += include/dev/i2c/ti-tmp112.h
-
-include_dev_spidir = $(includedir)/dev/spi
-include_dev_spi_HEADERS =
-include_dev_spi_HEADERS += include/dev/spi/spi.h
-
-include_dev_serialdir = $(includedir)/dev/serial
-include_dev_serial_HEADERS =
-include_dev_serial_HEADERS += include/dev/serial/sc16is752.h
-
-include_linuxdir = $(includedir)/linux
-include_linux_HEADERS =
-include_linux_HEADERS += include/linux/i2c.h
-include_linux_HEADERS += include/linux/i2c-dev.h
-
-include_linux_spidir = $(includedir)/linux/spi
-include_linux_spi_HEADERS =
-include_linux_spi_HEADERS += include/linux/spi/spidev.h
-
noinst_LIBRARIES = libdev.a
libdev_a_SOURCES =
@@ -53,5 +20,4 @@ libdev_a_SOURCES += serial/sc16is752.c
libdev_a_SOURCES += serial/sc16is752-spi.c
libdev_a_SOURCES += serial/sc16is752-regs.h
-include $(srcdir)/preinstall.am
include $(top_srcdir)/automake/local.am
diff --git a/cpukit/dev/include/dev/i2c/eeprom.h b/cpukit/dev/include/dev/i2c/eeprom.h
deleted file mode 100644
index 73df5ad9f4..0000000000
--- a/cpukit/dev/include/dev/i2c/eeprom.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/**
- * @file
- *
- * @brief EEPROM Driver API
- *
- * @ingroup I2CEEPROM
- */
-
-/*
- * Copyright (c) 2014 embedded brains GmbH. All rights reserved.
- *
- * embedded brains GmbH
- * Dornierstr. 4
- * 82178 Puchheim
- * Germany
- * <rtems@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _DEV_I2C_EEPROM_H
-#define _DEV_I2C_EEPROM_H
-
-#include <dev/i2c/i2c.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/**
- * @defgroup I2CEEPROM EEPROM Driver
- *
- * @ingroup I2CDevice
- *
- * @brief Driver for EEPROM device.
- *
- * @{
- */
-
-int i2c_dev_register_eeprom(
- const char *bus_path,
- const char *dev_path,
- uint16_t i2c_address,
- uint16_t address_bytes,
- uint16_t page_size_in_bytes,
- uint32_t size_in_bytes,
- uint32_t program_timeout_in_ms
-);
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* _DEV_I2C_EEPROM_H */
diff --git a/cpukit/dev/include/dev/i2c/fpga-i2c-slave.h b/cpukit/dev/include/dev/i2c/fpga-i2c-slave.h
deleted file mode 100644
index c10b26ac5b..0000000000
--- a/cpukit/dev/include/dev/i2c/fpga-i2c-slave.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2016-2017 Chris Johns <chrisj@rtems.org>
- * All rights reserved.
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-/*
- * I2C slave for testing:
- * https://github.com/oetr/FPGA-I2C-Slave
- */
-
-#ifndef FPGA_I2C_SLAVE_H
-#define FPGA_I2C_SLAVE_H
-
-#include <dev/i2c/i2c.h>
-
-int i2c_dev_register_fpga_i2c_slave(const char* bus_path,
- const char* dev_path,
- uint16_t address,
- size_t size);
-
-#endif
diff --git a/cpukit/dev/include/dev/i2c/gpio-nxp-pca9535.h b/cpukit/dev/include/dev/i2c/gpio-nxp-pca9535.h
deleted file mode 100644
index 1ebc1a3d4d..0000000000
--- a/cpukit/dev/include/dev/i2c/gpio-nxp-pca9535.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/**
- * @file
- *
- * @brief GPIO NXP PCA9535 Driver API
- *
- * @ingroup I2CGPIONXPPCA9535
- */
-
-/*
- * Copyright (c) 2014 embedded brains GmbH. All rights reserved.
- *
- * embedded brains GmbH
- * Dornierstr. 4
- * 82178 Puchheim
- * Germany
- * <rtems@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _DEV_I2C_GPIO_NXP_PCA9539_H
-#define _DEV_I2C_GPIO_NXP_PCA9539_H
-
-#include <dev/i2c/i2c.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/**
- * @defgroup I2CGPIONXPPCA9535 GPIO NXP PCA9535 Driver
- *
- * @ingroup I2CDevice
- *
- * @brief Driver for NXP PCA9535 16-bit GPIO device.
- *
- * @{
- */
-
-int i2c_dev_register_gpio_nxp_pca9535(
- const char *bus_path,
- const char *dev_path,
- uint16_t address
-);
-
-#define GPIO_NXP_PCA9535_GET_INPUT (I2C_DEV_IO_CONTROL + 0)
-
-#define GPIO_NXP_PCA9535_GET_OUTPUT (I2C_DEV_IO_CONTROL + 1)
-
-#define GPIO_NXP_PCA9535_SET_OUTPUT (I2C_DEV_IO_CONTROL + 2)
-
-#define GPIO_NXP_PCA9535_CLEAR_AND_SET_OUTPUT (I2C_DEV_IO_CONTROL + 3)
-
-#define GPIO_NXP_PCA9535_GET_POL_INV (I2C_DEV_IO_CONTROL + 4)
-
-#define GPIO_NXP_PCA9535_SET_POL_INV (I2C_DEV_IO_CONTROL + 5)
-
-#define GPIO_NXP_PCA9535_GET_CONFIG (I2C_DEV_IO_CONTROL + 6)
-
-#define GPIO_NXP_PCA9535_SET_CONFIG (I2C_DEV_IO_CONTROL + 7)
-
-static inline int gpio_nxp_pca9535_get_input(int fd, uint16_t *val)
-{
- return ioctl(fd, GPIO_NXP_PCA9535_GET_INPUT, val);
-}
-
-static inline int gpio_nxp_pca9535_get_output(int fd, uint16_t *val)
-{
- return ioctl(fd, GPIO_NXP_PCA9535_GET_OUTPUT, val);
-}
-
-static inline int gpio_nxp_pca9535_set_output(int fd, uint16_t val)
-{
- return ioctl(fd, GPIO_NXP_PCA9535_SET_OUTPUT, (void *)(uintptr_t) val);
-}
-
-static inline int gpio_nxp_pca9535_clear_and_set_output(
- int fd,
- uint16_t clear,
- uint16_t set
-)
-{
- uint32_t clear_and_set = ((uint32_t) set << 16) | (uint32_t) clear;
-
- return ioctl(
- fd,
- GPIO_NXP_PCA9535_CLEAR_AND_SET_OUTPUT,
- (void *)(uintptr_t) clear_and_set
- );
-}
-
-static inline int gpio_nxp_pca9535_get_polarity_inversion(
- int fd,
- uint16_t *val
-)
-{
- return ioctl(fd, GPIO_NXP_PCA9535_GET_POL_INV, val);
-}
-
-static inline int gpio_nxp_pca9535_set_polarity_inversion(int fd, uint16_t val)
-{
- return ioctl(fd, GPIO_NXP_PCA9535_SET_POL_INV, (void *)(uintptr_t) val);
-}
-
-static inline int gpio_nxp_pca9535_get_config(int fd, uint16_t *val)
-{
- return ioctl(fd, GPIO_NXP_PCA9535_GET_CONFIG, val);
-}
-
-static inline int gpio_nxp_pca9535_set_config(int fd, uint16_t val)
-{
- return ioctl(fd, GPIO_NXP_PCA9535_SET_CONFIG, (void *)(uintptr_t) val);
-}
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* _DEV_I2C_GPIO_NXP_PCA9539_H */
diff --git a/cpukit/dev/include/dev/i2c/i2c.h b/cpukit/dev/include/dev/i2c/i2c.h
deleted file mode 100644
index 2ace4fcf64..0000000000
--- a/cpukit/dev/include/dev/i2c/i2c.h
+++ /dev/null
@@ -1,432 +0,0 @@
-/**
- * @file
- *
- * @brief Inter-Integrated Circuit (I2C) Driver API
- *
- * @ingroup I2C
- */
-
-/*
- * Copyright (c) 2014 embedded brains GmbH. All rights reserved.
- *
- * embedded brains GmbH
- * Dornierstr. 4
- * 82178 Puchheim
- * Germany
- * <rtems@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _DEV_I2C_I2C_H
-#define _DEV_I2C_I2C_H
-
-#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
-
-#include <rtems.h>
-#include <rtems/seterr.h>
-
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-typedef struct i2c_msg i2c_msg;
-
-typedef struct i2c_bus i2c_bus;
-
-typedef struct i2c_dev i2c_dev;
-
-typedef struct i2c_rdwr_ioctl_data i2c_rdwr_ioctl_data;
-
-/**
- * @defgroup I2C Inter-Integrated Circuit (I2C) Driver
- *
- * @brief Inter-Integrated Circuit (I2C) bus and device driver support.
- *
- * @{
- */
-
-/**
- * @defgroup I2CBus I2C Bus Driver
- *
- * @ingroup I2C
- *
- * @{
- */
-
-/**
- * @name I2C IO Control Commands
- *
- * @{
- */
-
-/**
- * @brief Obtains the bus.
- *
- * This command has no argument.
- */
-#define I2C_BUS_OBTAIN 0x800
-
-/**
- * @brief Releases the bus.
- *
- * This command has no argument.
- */
-#define I2C_BUS_RELEASE 0x801
-
-/**
- * @brief Gets the bus control.
- *
- * The argument type is a pointer to i2c_bus pointer.
- */
-#define I2C_BUS_GET_CONTROL 0x802
-
-/**
- * @brief Sets the bus clock in Hz.
- *
- * The argument type is unsigned long.
- */
-#define I2C_BUS_SET_CLOCK 0x803
-
-/** @} */
-
-/**
- * @brief Default I2C bus clock in Hz.
- */
-#define I2C_BUS_CLOCK_DEFAULT 100000
-
-/**
- * @brief I2C bus control.
- */
-struct i2c_bus {
- /**
- * @brief Transfers I2C messages.
- *
- * @param[in] bus The bus control.
- * @param[in] msgs The messages to transfer.
- * @param[in] msg_count The count of messages to transfer. It must be
- * positive.
- *
- * @retval 0 Successful operation.
- * @retval negative Negative error number in case of an error.
- */
- int (*transfer)(i2c_bus *bus, i2c_msg *msgs, uint32_t msg_count);
-
- /**
- * @brief Sets the bus clock.
- *
- * @param[in] bus The bus control.
- * @param[in] clock The desired bus clock in Hz.
- *
- * @retval 0 Successful operation.
- * @retval negative Negative error number in case of an error.
- */
- int (*set_clock)(i2c_bus *bus, unsigned long clock);
-
- /**
- * @brief Destroys the bus.
- *
- * @param[in] bus The bus control.
- */
- void (*destroy)(i2c_bus *bus);
-
- /**
- * @brief Mutex to protect the bus access.
- */
- rtems_id mutex;
-
- /**
- * @brief Default slave device address.
- */
- uint16_t default_address;
-
- /**
- * @brief Use 10-bit addresses.
- */
- bool ten_bit_address;
-
- /**
- * @brief Use SMBus PEC.
- */
- bool use_pec;
-
- /**
- * @brief Transfer retry count.
- */
- unsigned long retries;
-
- /**
- * @brief Transaction timeout in ticks.
- */
- rtems_interval timeout;
-
- /**
- * @brief Controller functionality.
- */
- unsigned long functionality;
-};
-
-/**
- * @brief Initializes a bus control.
- *
- * After a sucessful initialization the bus control must be destroyed via
- * i2c_bus_destroy(). A registered bus control will be automatically destroyed
- * in case the device file is unlinked. Make sure to call i2c_bus_destroy() in
- * a custom destruction handler.
- *
- * @param[in] bus The bus control.
- *
- * @retval 0 Successful operation.
- * @retval -1 An error occurred. The errno is set to indicate the error.
- *
- * @see i2c_bus_register()
- */
-int i2c_bus_init(i2c_bus *bus);
-
-/**
- * @brief Allocates a bus control from the heap and initializes it.
- *
- * After a sucessful allocation and initialization the bus control must be
- * destroyed via i2c_bus_destroy_and_free(). A registered bus control will be
- * automatically destroyed in case the device file is unlinked. Make sure to
- * call i2c_bus_destroy_and_free() in a custom destruction handler.
- *
- * @param[in] size The size of the bus control. This enables the addition of
- * bus controller specific data to the base bus control. The bus control is
- * zero initialized.
- *
- * @retval non-NULL The new bus control.
- * @retval NULL An error occurred. The errno is set to indicate the error.
- *
- * @see i2c_bus_register()
- */
-i2c_bus *i2c_bus_alloc_and_init(size_t size);
-
-/**
- * @brief Destroys a bus control.
- *
- * @param[in] bus The bus control.
- */
-void i2c_bus_destroy(i2c_bus *bus);
-
-/**
- * @brief Destroys a bus control and frees its memory.
- *
- * @param[in] bus The bus control.
- */
-void i2c_bus_destroy_and_free(i2c_bus *bus);
-
-/**
- * @brief Registers a bus control.
- *
- * This function claims ownership of the bus control regardless if the
- * registration is successful or not.
- *
- * @param[in] bus The bus control.
- * @param[in] bus_path The path to the bus device file.
- *
- * @retval 0 Successful operation.
- * @retval -1 An error occurred. The errno is set to indicate the error.
- */
-int i2c_bus_register(
- i2c_bus *bus,
- const char *bus_path
-);
-
-/**
- * @brief Obtains the bus.
- *
- * @param[in] bus The bus control.
- */
-void i2c_bus_obtain(i2c_bus *bus);
-
-/**
- * @brief Releases the bus.
- *
- * @param[in] bus The bus control.
- */
-void i2c_bus_release(i2c_bus *bus);
-
-/**
- * @brief Transfers I2C messages.
- *
- * The bus is obtained before the transfer and released afterwards.
- *
- * @param[in] bus The bus control.
- * @param[in] msgs The messages to transfer.
- * @param[in] msg_count The count of messages to transfer. It must be
- * positive.
- *
- * @retval 0 Successful operation.
- * @retval negative Negative error number in case of an error.
- */
-int i2c_bus_transfer(i2c_bus *bus, i2c_msg *msgs, uint32_t msg_count);
-
-/** @} */
-
-/**
- * @defgroup I2CDevice I2C Device Driver
- *
- * @ingroup I2C
- *
- * @{
- */
-
-/**
- * @brief Base number for device IO control commands.
- */
-#define I2C_DEV_IO_CONTROL 0x900
-
-/**
- * @brief I2C slave device control.
- */
-struct i2c_dev {
- /**
- * @brief Reads from the device.
- *
- * @retval non-negative Bytes transferred from device.
- * @retval negative Negative error number in case of an error.
- */
- ssize_t (*read)(i2c_dev *dev, void *buf, size_t n, off_t offset);
-
- /**
- * @brief Writes to the device.
- *
- * @retval non-negative Bytes transferred to device.
- * @retval negative Negative error number in case of an error.
- */
- ssize_t (*write)(i2c_dev *dev, const void *buf, size_t n, off_t offset);
-
- /**
- * @brief Device IO control.
- *
- * @retval 0 Successful operation.
- * @retval negative Negative error number in case of an error.
- */
- int (*ioctl)(i2c_dev *dev, ioctl_command_t command, void *arg);
-
- /**
- * @brief Gets the file size.
- */
- off_t (*get_size)(i2c_dev *dev);
-
- /**
- * @brief Gets the file block size.
- */
- blksize_t (*get_block_size)(i2c_dev *dev);
-
- /**
- * @brief Destroys the device.
- */
- void (*destroy)(i2c_dev *dev);
-
- /**
- * @brief The bus control.
- */
- i2c_bus *bus;
-
- /**
- * @brief The device address.
- */
- uint16_t address;
-
- /**
- * @brief File descriptor of the bus.
- *
- * This prevents destruction of the bus since we hold a reference to it with
- * this.
- */
- int bus_fd;
-};
-
-
-/**
- * @brief Initializes a device control.
- *
- * After a sucessful initialization the device control must be destroyed via
- * i2c_dev_destroy(). A registered device control will be automatically
- * destroyed in case the device file is unlinked. Make sure to call
- * i2c_dev_destroy_and_free() in a custom destruction handler.
- *
- * @param[in] device The device control.
- * @param[in] bus_path The path to the bus device file.
- * @param[in] address The address of the device.
- *
- * @retval 0 Successful operation.
- * @retval -1 An error occurred. The errno is set to indicate the error.
- *
- * @see i2c_dev_register()
- */
-int i2c_dev_init(i2c_dev *dev, const char *bus_path, uint16_t address);
-
-/**
- * @brief Allocates a device control from the heap and initializes it.
- *
- * After a sucessful allocation and initialization the device control must be
- * destroyed via i2c_dev_destroy_and_free(). A registered device control will
- * be automatically destroyed in case the device file is unlinked. Make sure
- * to call i2c_dev_destroy_and_free() in a custom destruction handler.
- *
- * @param[in] size The size of the device control. This enables the addition
- * of device specific data to the base device control. The device control is
- * zero initialized.
- * @param[in] bus_path The path to the bus device file.
- * @param[in] address The address of the device.
- *
- * @retval non-NULL The new device control.
- * @retval NULL An error occurred. The errno is set to indicate the error.
- *
- * @see i2c_dev_register()
- */
-i2c_dev *i2c_dev_alloc_and_init(
- size_t size,
- const char *bus_path,
- uint16_t address
-);
-
-/**
- * @brief Destroys a device control.
- *
- * @param[in] dev The device control.
- */
-void i2c_dev_destroy(i2c_dev *dev);
-
-/**
- * @brief Destroys a device control and frees its memory.
- *
- * @param[in] dev The device control.
- */
-void i2c_dev_destroy_and_free(i2c_dev *dev);
-
-/**
- * @brief Registers a device control.
- *
- * This function claims ownership of the device control regardless if the
- * registration is successful or not.
- *
- * @param[in] dev The dev control.
- * @param[in] dev_path The path to the device file of the device.
- *
- * @retval 0 Successful operation.
- * @retval -1 An error occurred. The errno is set to indicate the error.
- */
-int i2c_dev_register(
- i2c_dev *dev,
- const char *dev_path
-);
-
-/** @} */ /* end of i2c device driver */
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* _DEV_I2C_I2C_H */
diff --git a/cpukit/dev/include/dev/i2c/sensor-lm75a.h b/cpukit/dev/include/dev/i2c/sensor-lm75a.h
deleted file mode 100644
index e1957dad19..0000000000
--- a/cpukit/dev/include/dev/i2c/sensor-lm75a.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/**
- * @file
- *
- * @brief Temperature Sensor LM75A Driver API
- *
- * @ingroup I2CSensorLM75A
- */
-
-/*
- * Copyright (c) 2017 embedded brains GmbH. All rights reserved.
- *
- * embedded brains GmbH
- * Dornierstr. 4
- * 82178 Puchheim
- * Germany
- * <rtems@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _DEV_I2C_SENSOR_LM75A_H
-#define _DEV_I2C_SENSOR_LM75A_H
-
-#include <dev/i2c/i2c.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/**
- * @defgroup I2CSensorLM75A Temperature Sensor LM75A Driver
- *
- * @ingroup I2CDevice
- *
- * @brief Driver for NXP or Texas Instruments LM75A temperature sensor.
- *
- * @{
- */
-
-int i2c_dev_register_sensor_lm75a(
- const char *bus_path,
- const char *dev_path,
- uint16_t address
-);
-
-typedef enum {
- SENSOR_LM75A_GET_CONF = I2C_DEV_IO_CONTROL,
- SENSOR_LM75A_SET_CONF,
- SENSOR_LM75A_CLEAR_AND_SET_CONF,
- SENSOR_LM75A_GET_TEMP,
- SENSOR_LM75A_GET_TOS,
- SENSOR_LM75A_SET_TOS,
- SENSOR_LM75A_GET_THYST,
- SENSOR_LM75A_SET_THYST
-} sensor_lm75a_command;
-
-static inline int sensor_lm75a_get_conf(int fd, uint8_t *val)
-{
- return ioctl(fd, SENSOR_LM75A_GET_CONF, val);
-}
-
-static inline int sensor_lm75a_set_conf(int fd, uint8_t val)
-{
- return ioctl(fd, SENSOR_LM75A_SET_CONF, (void *)(uintptr_t) val);
-}
-
-static inline int sensor_lm75a_clear_and_set_conf(
- int fd,
- uint8_t clear,
- uint8_t set
-)
-{
- uint16_t clear_and_set = (uint16_t) (((uint16_t) set << 8) | clear);
-
- return ioctl(
- fd,
- SENSOR_LM75A_CLEAR_AND_SET_CONF,
- (void *)(uintptr_t) clear_and_set
- );
-}
-
-static inline int sensor_lm75a_get_temp(int fd, int16_t *val)
-{
- return ioctl(fd, SENSOR_LM75A_GET_TEMP, val);
-}
-
-static inline int sensor_lm75a_get_temp_celsius(int fd, double *celsius)
-{
- int rv;
- int16_t val;
-
- rv = ioctl(fd, SENSOR_LM75A_GET_TEMP, &val);
- *celsius = (((int) val) >> 5) * 0.125;
- return rv;
-}
-
-static inline int sensor_lm75a_get_tos(int fd, uint16_t *val)
-{
- return ioctl(fd, SENSOR_LM75A_GET_TOS, val);
-}
-
-static inline int sensor_lm75a_set_tos(int fd, uint16_t val)
-{
- return ioctl(fd, SENSOR_LM75A_SET_TOS, (void *)(uintptr_t) val);
-}
-
-static inline int sensor_lm75a_get_thyst(int fd, uint16_t *val)
-{
- return ioctl(fd, SENSOR_LM75A_GET_THYST, val);
-}
-
-static inline int sensor_lm75a_set_thyst(int fd, uint16_t val)
-{
- return ioctl(fd, SENSOR_LM75A_SET_THYST, (void *)(uintptr_t) val);
-}
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* _DEV_I2C_SENSOR_LM75A_H */
diff --git a/cpukit/dev/include/dev/i2c/switch-nxp-pca9548a.h b/cpukit/dev/include/dev/i2c/switch-nxp-pca9548a.h
deleted file mode 100644
index ce8ef2c809..0000000000
--- a/cpukit/dev/include/dev/i2c/switch-nxp-pca9548a.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/**
- * @file
- *
- * @brief Switch NXP PCA9548A Driver API
- *
- * @ingroup I2CSWITCHNXPPCA9548A
- */
-
-/*
- * Copyright (c) 2014 embedded brains GmbH. All rights reserved.
- *
- * embedded brains GmbH
- * Dornierstr. 4
- * 82178 Puchheim
- * Germany
- * <rtems@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _DEV_I2C_SWITCH_NXP_PCA9548A_H
-#define _DEV_I2C_SWITCH_NXP_PCA9548A_H
-
-#include <dev/i2c/i2c.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/**
- * @defgroup I2CSWITCHNXPPCA9548A Switch NXP PCA9535 Driver
- *
- * @ingroup I2CDevice
- *
- * @brief Driver for NXP PCA9548A 8-channel switch device.
- *
- * @{
- */
-
-int i2c_dev_register_switch_nxp_pca9548a(
- const char *bus_path,
- const char *dev_path,
- uint16_t address
-);
-
-#define SWITCH_NXP_PCA9548A_GET_CONTROL (I2C_DEV_IO_CONTROL + 0)
-
-#define SWITCH_NXP_PCA9548A_SET_CONTROL (I2C_DEV_IO_CONTROL + 1)
-
-static inline int switch_nxp_pca9548a_get_control(int fd, uint8_t *val)
-{
- return ioctl(fd, SWITCH_NXP_PCA9548A_GET_CONTROL, val);
-}
-
-static inline int switch_nxp_pca9548a_set_control(int fd, uint8_t val)
-{
- return ioctl(fd, SWITCH_NXP_PCA9548A_SET_CONTROL, (void *)(uintptr_t) val);
-}
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* _DEV_I2C_SWITCH_NXP_PCA9548A_H */
diff --git a/cpukit/dev/include/dev/i2c/ti-ads-16bit-adc.h b/cpukit/dev/include/dev/i2c/ti-ads-16bit-adc.h
deleted file mode 100644
index 40d680da88..0000000000
--- a/cpukit/dev/include/dev/i2c/ti-ads-16bit-adc.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright (c) 2016-2017 Chris Johns <chrisj@rtems.org>
- * All rights reserved.
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-/*
- * TI ADS1113 and ADS1115.
- * http://www.ti.com/product/ads1113/description
- */
-
-#ifndef TI_ADS1113_ADS1115_H
-#define TI_ADS1113_ADS1115_H
-
-#include <dev/i2c/i2c.h>
-
-/*
- * Supported devices. Please others once tested.
- */
-typedef enum {
- TI_ADS1113,
- TI_ADS1114,
- TI_ADS1115
-} ti_ads_adc;
-
-/*
- * Multiplexer interface. Avalable on ADS1115.
- */
-typedef enum {
- TI_ADS_MUX_ApA0_AnA1 = 0, /* default */
- TI_ADS_MUX_ApA0_AnA3 = 1,
- TI_ADS_MUX_ApA1_AnA3 = 2,
- TI_ADS_MUX_ApA2_AnA3 = 3,
- TI_ADS_MUX_ApA0_AnGND = 4,
- TI_ADS_MUX_ApA1_AnGND = 5,
- TI_ADS_MUX_ApA2_AnGND = 6,
- TI_ADS_MUX_ApA3_AnGND = 7
-} ti_ads_adc_mux;
-
-/*
- * Programmable Gain Amplifier. Avalable on ADS1114 and ADS1115.
- */
-typedef enum {
- TI_ADS_PGA_FS_6_144V = 0,
- TI_ADS_PGA_FS_4_096V = 1,
- TI_ADS_PGA_FS_2_048V = 2, /* default */
- TI_ADS_PGA_FS_1_024V = 3,
- TI_ADS_PGA_FS_0_512V = 4,
- TI_ADS_PGA_FS_0_256V = 5,
- TI_ADS_PGA_FS_0_256V_2 = 6,
- TI_ADS_PGA_FS_0_256V_3 = 7,
-} ti_ads_adc_pga;
-
-/*
- * Mode.
- */
-typedef enum {
- TI_ADS_MODE_CONTINUOUS = 0,
- TI_ADS_MODE_SINGLE_SHOT = 1, /* default */
-} ti_ads_adc_mode;
-
-/*
- * Data rate.
- */
-typedef enum {
- TI_ADS_DATARATE_8SPS = 0,
- TI_ADS_DATARATE_16SPS = 1,
- TI_ADS_DATARATE_32SPS = 2,
- TI_ADS_DATARATE_64SPS = 3,
- TI_ADS_DATARATE_128SPS = 4, /* default */
- TI_ADS_DATARATE_250SPS = 5,
- TI_ADS_DATARATE_475SPS = 6,
- TI_ADS_DATARATE_860SPS = 7,
-} ti_ads_adc_data_rate;
-
-/*
- * Comparitor interface. Avalable on ADS1114 and ADS1115.
- *
- * Create a value to write.
- */
-#define TI_ADS_COMP_MODE_HYSTERESIS (0 << 4) /* default */
-#define TI_ADS_COMP_MODE_WINDOW (1 << 4)
-#define TI_ADS_COMP_POL_ACTIVE_LOW (0 << 3) /* default */
-#define TI_ADS_COMP_POL_ACTIVE_HIGH (1 << 3)
-#define TI_ADS_COMP_LAT_NON_LATCHING (0 << 2) /* default */
-#define TI_ADS_COMP_LAT_LATCHING (1 << 2)
-#define TI_ADS_COMP_QUE_DISABLE_COMP (3 << 0) /* default */
-#define TI_ADS_COMP_QUE_AFTER_4 (2 << 0)
-#define TI_ADS_COMP_QUE_AFTER_2 (1 << 0)
-#define TI_ADS_COMP_QUE_AFTER_1 (0 << 0)
-
-/*
- * IO control interface.
- *
- * Note: if in Power-down single-shot mode (default) a conversion requires the
- * device to power up and perform a conversion and this can take
- * while. The TI_ADS_ADC_GET_CONV_WAIT call sets the micro-seconds to
- * wait between polls. The actual rate will depend on the system tick.
- */
-#define TI_ADS_ADC_GET_CONVERSION (I2C_DEV_IO_CONTROL + 0)
-#define TI_ADS_ADC_SET_MUX (I2C_DEV_IO_CONTROL + 1)
-#define TI_ADS_ADC_SET_PGA (I2C_DEV_IO_CONTROL + 2)
-#define TI_ADS_ADC_SET_MODE (I2C_DEV_IO_CONTROL + 3)
-#define TI_ADS_ADC_SET_DATA_RATE (I2C_DEV_IO_CONTROL + 4)
-#define TI_ADS_ADC_SET_COMP (I2C_DEV_IO_CONTROL + 5)
-#define TI_ADS_ADC_SET_LO_THRESH (I2C_DEV_IO_CONTROL + 6)
-#define TI_ADS_ADC_SET_HI_THRESH (I2C_DEV_IO_CONTROL + 7)
-#define TI_ADS_ADC_SET_CONV_WAIT (I2C_DEV_IO_CONTROL + 8)
-
-/*
- * Register the device.
- */
-int i2c_dev_register_ti_ads_adc(const char* bus_path,
- const char* dev_path,
- uint16_t address,
- ti_ads_adc device);
-
-/*
- * Perform a conversion. If the mode is single shot a single shot conversion is
- * started and the call waits for the conversion to complete.
- */
-static inline int
-ti_ads_adc_convert(int fd, uint16_t* sample)
-{
- return ioctl(fd, TI_ADS_ADC_GET_CONVERSION, sample);
-}
-
-/*
- * Set the multipler.
- */
-static inline int
-ti_ads_adc_set_mux(int fd, ti_ads_adc_mux mux)
-{
- return ioctl(fd, TI_ADS_ADC_SET_MUX, (void *)(uintptr_t) mux);
-}
-
-/*
- * Set the PGA.
- */
-static inline int
-ti_ads_adc_set_pga(int fd, ti_ads_adc_pga pga)
-{
- return ioctl(fd, TI_ADS_ADC_SET_PGA, (void *)(uintptr_t) pga);
-}
-
-/*
- * Set the mode.
- */
-static inline int
-ti_ads_adc_set_mode(int fd, ti_ads_adc_mode mode)
-{
- return ioctl(fd, TI_ADS_ADC_SET_MODE, (void *)(uintptr_t) mode);
-}
-
-/*
- * Set the data rate.
- */
-static inline int
-ti_ads_adc_set_data_rate(int fd, ti_ads_adc_data_rate rate)
-{
- return ioctl(fd, TI_ADS_ADC_SET_DATA_RATE, (void *)(uintptr_t) rate);
-}
-
-/*
- * Configure the comparator.
- */
-static inline int
-ti_ads_adc_set_comparator(int fd, uint16_t comp)
-{
- return ioctl(fd, TI_ADS_ADC_SET_COMP, (void *)(uintptr_t) comp);
-}
-
-/*
- * Set the lower threshold.
- */
-static inline int
-ti_ads_adc_set_low_threshold(int fd, uint16_t level)
-{
- return ioctl(fd, TI_ADS_ADC_SET_LO_THRESH, (void *)(uintptr_t) level);
-}
-
-/*
- * Set the upper threshold.
- */
-static inline int
-ti_ads_adc_set_high_threshold(int fd, uint16_t level)
-{
- return ioctl(fd, TI_ADS_ADC_SET_HI_THRESH, (void *)(uintptr_t) level);
-}
-
-/*
- * Set the conversion poll wait period.
- */
-static inline int
-ti_ads_adc_set_conversion_poll_wait(int fd, uint32_t micro_seconds)
-{
- return ioctl(fd, TI_ADS_ADC_SET_CONV_WAIT, (void *)(uintptr_t) micro_seconds);
-}
-
-#endif
diff --git a/cpukit/dev/include/dev/i2c/ti-lm25066a.h b/cpukit/dev/include/dev/i2c/ti-lm25066a.h
deleted file mode 100644
index 4429f0fc70..0000000000
--- a/cpukit/dev/include/dev/i2c/ti-lm25066a.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright (c) 2016-2017 Chris Johns <chrisj@rtems.org>
- * All rights reserved.
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-/*
- * TI LM25066A
- * http://www.ti.com/product/LM25066A
- */
-
-#ifndef TI_LM25066A_H
-#define TI_LM25066A_H
-
-#include <dev/i2c/i2c.h>
-
-/*
- * PM Bus Command interface.
- *
- * The keys are:
- * IO : IO direction R=read W=write
- * SZ : Size in bytes.
- */
-typedef enum
-{ /* IO SZ Name */
- TI_LM25066A_OPERATION = 0, /* R 1 PMBus */
- TI_LM25066A_CLEAR_FAULTS = 1, /* W 0 PMBus */
- TI_LM25066A_CAPABILITY = 2, /* R 1 PMBus */
- TI_LM25066A_VOUT_UV_WARN_LIMIT = 3, /* RW 2 PMBus */
- TI_LM25066A_OT_FAULT_LIMIT = 4, /* RW 2 PMBus */
- TI_LM25066A_OT_WARN_LIMIT = 5, /* RW 2 PMBus */
- TI_LM25066A_VIN_OV_WARN_LIMIT = 6, /* RW 2 PMBus */
- TI_LM25066A_VIN_UV_WARN_LIMIT = 7, /* RW 2 PMBus */
- TI_LM25066A_STATUS_BYTE = 8, /* R 1 PMBus */
- TI_LM25066A_STATUS_WORD = 9, /* R 2 PMBus */
- TI_LM25066A_STATUS_VOUT = 10, /* R 1 PMBus */
- TI_LM25066A_STATUS_INPUT = 11, /* R 1 PMBus */
- TI_LM25066A_STATUS_TEMPERATURE = 12, /* R 1 PMBus */
- TI_LM25066A_STATUS_CML = 13, /* R 1 PMBus */
- TI_LM25066A_STATUS_MFR_SPECIFIC = 14, /* R 1 PMBus */
- TI_LM25066A_READ_VIN = 15, /* R 2 PMBus */
- TI_LM25066A_READ_VOUT = 16, /* R 2 PMBus */
- TI_LM25066A_READ_TEMPERATURE_1 = 17, /* R 2 PMBus */
- TI_LM25066A_MFR_ID = 18, /* R 3 PMBus */
- TI_LM25066A_MFR_MODEL = 19, /* R 8 PMBus */
- TI_LM25066A_MFR_REVISION = 20, /* R 2 PMBus */
- TI_LM25066A_MFR_READ_VAUX = 21, /* R 2 MFR_SPECIFIC_00 */
- TI_LM25066A_MFR_READ_IIN = 22, /* R 2 MFR_SPECIFIC_01 */
- TI_LM25066A_MFR_READ_PIN = 23, /* R 2 MFR_SPECIFIC_02 */
- TI_LM25066A_MFR_IIN_OC_WARN_LIMIT = 24, /* RW 2 MFR_SPECIFIC_03 */
- TI_LM25066A_MFR_PIN_OP_WARN_LIMIT = 25, /* RW 2 MFR_SPECIFIC_04 */
- TI_LM25066A_MFR_PIN_PEAK = 26, /* R 2 MFR_SPECIFIC_05 */
- TI_LM25066A_MFR_CLEAR_PIN_PEAK = 27, /* W 0 MFR_SPECIFIC_06 */
- TI_LM25066A_MFR_GATE_MASK = 28, /* RW 1 MFR_SPECIFIC_07 */
- TI_LM25066A_MFR_ALERT_MASK = 29, /* RW 2 MFR_SPECIFIC_08 */
- TI_LM25066A_MFR_DEVICE_SETUP = 30, /* RW 1 MFR_SPECIFIC_09 */
- TI_LM25066A_MFR_BLOCK_READ = 31, /* R 12 MFR_SPECIFIC_10 */
- TI_LM25066A_MFR_SAMPLES_FOR_AVG = 32, /* RW 1 MFR_SPECIFIC_11 */
- TI_LM25066A_MFR_READ_AVG_VIN = 33, /* R 2 MFR_SPECIFIC_12 */
- TI_LM25066A_MFR_READ_AVG_VOUT = 34, /* R 2 MFR_SPECIFIC_13 */
- TI_LM25066A_MFR_READ_AVG_IIN = 35, /* R 2 MFR_SPECIFIC_14 */
- TI_LM25066A_MFR_READ_AVG_PIN = 36, /* R 2 MFR_SPECIFIC_15 */
- TI_LM25066A_MFR_BLACK_BOX_READ = 37, /* R 12 MFR_SPECIFIC_16 */
- TI_LM25066A_MFR_DIAGNOSTIC_WORD_READ = 38, /* R 2 MFR_SPECIFIC_17 */
- TI_LM25066A_MFR_AVG_BLOCK_READ = 39, /* R 12 MFR_SPECIFIC_18 */
-} ti_lm25066a_cmd;
-
-/*
- * Real world converters. Page 46 of the datasheet discusses reading and
- * writing telemtry data and obtaining the real world values. There are 8
- * separate conversions using the same formula.
- *
- * The formula is:
- *
- * 1 -R
- * X = - (Y x 10 - b)
- * m
- *
- * X: the calculated "real world" value (volts, amps, watt, etc.)
- * m: the slope coefficient
- * Y: a two byte two's complement integer received from device
- * b: the offset, a two byte two's complement integer
- * R: the exponent, a one byte two's complement integer
- *
- * R in the table is inverted because we cannot store 0.01 in an int. This
- * makes the equation:
- *
- * 1 Y
- * X = - (- - b)
- * m R
- *
- * The R value lets the integer result have decimal places.
- *
- * There are 8 conversion table entries listed in Table 41 of the
- * data sheet. They are:
- *
- * 1. READ_VIN, READ_AVG_VIN, VIN_OV_WARN_LIMIT, VIN_UV_WARN_LIMIT
- * 2. READ_VOUT, READ_AVG_VOUT, VOUT_UV_WARN_LIMIT
- * 3. READ_VAUX
- * 4.GND READ_IIN, READ_AVG_IIN, MFR_IIN_OC_WARN_LIMIT
- * 4.VDD READ_IIN, READ_AVG_IIN, MFR_IIN_OC_WARN_LIMIT
- * 5.GND READ_PIN, READ_AVG_PIN, READ_PIN_PEAK, MFR_PIN_OP_WARN_LIMIT
- * 5.VCC READ_PIN, READ_AVG_PIN, READ_PIN_PEAK, MFR_PIN_OP_WARN_LIMIT
- * 6. READ_TEMPERATURE_1, OT_WARN_LIMIT, OT_FAULT_LIMIT
- *
- * You need to provide 6 sets of conversion factors. Row 4 and 5 depend on how
- * the device is wired. The driver will use the matching table row to convert
- * the 2-complement 12 bit to a real world value.
- */
-#define TI_LM25066A_CONVERSION_SIZE (6)
-typedef struct
-{
- int m; /* The slope coefficient */
- int b; /* The offset */
- int R; /* The inverted power of 10 of -R */
-} ti_lm25066a_conversion;
-
-/*
- * IO control interface.
- */
-#define TI_LM25066A_GET (I2C_DEV_IO_CONTROL + 0)
-#define TI_LM25066A_SET (I2C_DEV_IO_CONTROL + 1)
-
-/*
- * IO data types.
- */
-typedef enum
-{
- TI_LM25066A_8BIT = 0,
- TI_LM25066A_16BIT = 1,
- TI_LM25066A_VALUE = 2,
- TI_LM25066A_VALUES = 3,
- TI_LM25066A_STRING = 4,
- TI_LM25066A_RAW = 5
-} ti_lm25066a_data;
-
-/*
- * Struct to move data into and out of the driver.
- */
-typedef struct
-{
- ti_lm25066a_cmd cmd;
- ti_lm25066a_data type;
- union {
- uint8_t u8;
- uint16_t u16;
- int value;
- int values[6];
- char string[9];
- uint8_t* raw;
- } data;
-} ti_lm25066a_io;
-
-/*
- * Register the device.
- *
- * The conversions table has 6 columns.
- *
- * The values are an integer so the decimal_point value scales the value so it
- * can fit in an integer with the required number of decimal points.
- */
-int i2c_dev_register_ti_lm25066a(const char* bus_path,
- const char* dev_path,
- uint16_t address,
- const ti_lm25066a_conversion* const conversions,
- const int decimal_points);
-
-/*
- * Get.
- */
-static inline int
-ti_lm25066a_get(int fd, ti_lm25066a_io* io)
-{
- return ioctl(fd, TI_LM25066A_GET, io);
-}
-
-/*
- * Set.
- */
-static inline int
-ti_lm25066a_set(int fd, ti_lm25066a_io* io)
-{
- return ioctl(fd, TI_LM25066A_SET, io);
-}
-
-
-#endif
diff --git a/cpukit/dev/include/dev/i2c/ti-tmp112.h b/cpukit/dev/include/dev/i2c/ti-tmp112.h
deleted file mode 100644
index 1b80fa6994..0000000000
--- a/cpukit/dev/include/dev/i2c/ti-tmp112.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (c) 2016-2017 Chris Johns <chrisj@rtems.org>
- * All rights reserved.
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-/*
- * TI TMP112
- * http://www.ti.com/product/TMP112
- */
-
-#ifndef TI_TMP112_H
-#define TI_TMP112_H
-
-#include <dev/i2c/i2c.h>
-
-/*
- * Confirguration.
- */
-#define TI_TMP112_CR_0_25Hz (0 << 6)
-#define TI_TMP112_CR_1Hz (1 << 6)
-#define TI_TMP112_CR_4Hz (2 << 6) /* default */
-#define TI_TMP112_CR_8Hz (3 << 6)
-#define TI_TMP112_EM_NORMAL (0 << 4) /* default */
-#define TI_TMP112_EM_EXTENDED (1 << 4)
-#define TI_TMP112_SD_ON (0 << 8) /* default */
-#define TI_TMP112_SD_SHUTDOWN (1 << 8)
-#define TI_TMP112_TM_COMPARATOR (0 << 9) /* default */
-#define TI_TMP112_TM_INTERRUPT (1 << 9)
-#define TI_TMP112_POL_ALERT_LOW (0 << 10) /* default */
-#define TI_TMP112_POL_ALERT_HIGH (1 << 10)
-#define TI_TMP112_FQL_1 (0 << 11) /* default */
-#define TI_TMP112_FQL_2 (1 << 11)
-#define TI_TMP112_FQL_4 (2 << 11)
-#define TI_TMP112_FQL_6 (3 << 11)
-
-/*
- * IO control interface.
- */
-#define TI_TMP112_GET_TEMP (I2C_DEV_IO_CONTROL + 0)
-#define TI_TMP112_GET_TEMP_RAW (I2C_DEV_IO_CONTROL + 1)
-#define TI_TMP112_SET_CONFIG (I2C_DEV_IO_CONTROL + 2)
-#define TI_TMP112_SET_LOW_TEMP (I2C_DEV_IO_CONTROL + 3)
-#define TI_TMP112_SET_HIGH_TEMP (I2C_DEV_IO_CONTROL + 4)
-
-/*
- * Register the device.
- */
-int i2c_dev_register_ti_tmp112(const char* bus_path,
- const char* dev_path,
- uint16_t address);
-
-/*
- * Get the temperature in degrees C x 10000. To print you would so:
- *
- * printf("Temperature is %3d.%04d\n", temp / 10000, temp % 10000);
- *
- * If the device is shutdown a single conversion is made waiting for the
- * conversion to complete.
- */
-static inline int
-ti_tmp112_get_temperature(int fd, int* temp)
-{
- return ioctl(fd, TI_TMP112_GET_TEMP, temp);
-}
-
-/*
- * Get the temperature as the raw register value.
- *
- * If the device is shutdown a single conversion is made waiting for the
- * conversion to complete.
- */
-static inline int
-ti_tmp112_get_temperature_raw(int fd, unsigned int* temp)
-{
- return ioctl(fd, TI_TMP112_GET_TEMP_RAW, temp);
-}
-
-/*
- * Set the configuration.
- */
-static inline int
-ti_tmp112_adc_set_config(int fd, uint16_t config)
-{
- return ioctl(fd, TI_TMP112_SET_CONFIG, (void *)(uintptr_t) config);
-}
-
-/*
- * Set the low temperature.
- */
-static inline int
-ti_tmp112_set_low_temperator(int fd, uint16_t temp)
-{
- return ioctl(fd, TI_TMP112_SET_LOW_TEMP, (void *)(uintptr_t) temp);
-}
-
-/*
- * Set the high temperature.
- */
-static inline int
-ti_tmp112_adc_set_high_threshold(int fd, uint16_t level)
-{
- return ioctl(fd, TI_TMP112_SET_HIGH_TEMP, (void *)(uintptr_t) level);
-}
-
-#endif
diff --git a/cpukit/dev/include/dev/i2c/xilinx-axi-i2c.h b/cpukit/dev/include/dev/i2c/xilinx-axi-i2c.h
deleted file mode 100644
index fafac346ec..0000000000
--- a/cpukit/dev/include/dev/i2c/xilinx-axi-i2c.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright (c) 2016-2017 Chris Johns <chrisj@rtems.org> All rights reserved.
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-/*
- * Xilinx AXI IIC Interface v2.0. See PG090.pdf.
- *
- * Note, only master support is provided and no dynamic mode by design.
- *
- * The clock set up is to be handled by the IP integrator. There are too many
- * factors handling this in software.
- */
-
-
-#ifndef XILINX_AXI_I2C_H
-#define XILINX_AXI_I2C_H
-
-#include <dev/i2c/i2c.h>
-
-/*
- * The PL integrator controls the timing. This interface allows software to
- * override those settings. It pays to check the timing with ChipScope.
- *
- * If you set the AXI bus frequency you can use the clock speed ioctl call to
- * change the speed dymanically. The ioctl call overrides the defaults passed
- * in.
- *
- * Set the valid mask to the values that are to be set.
- */
-#define XILINX_AIX_I2C_AXI_CLOCK (1 << 0)
-#define XILINX_AIX_I2C_TSUSTA (1 << 1)
-#define XILINX_AIX_I2C_TSUSTO (1 << 2)
-#define XILINX_AIX_I2C_THDSTA (1 << 3)
-#define XILINX_AIX_I2C_TSUDAT (1 << 4)
-#define XILINX_AIX_I2C_TBUF (1 << 5)
-#define XILINX_AIX_I2C_THIGH (1 << 6)
-#define XILINX_AIX_I2C_TLOW (1 << 7)
-#define XILINX_AIX_I2C_THDDAT (1 << 8)
-#define XILINX_AIX_I2C_ALL_REGS (XILINX_AIX_I2C_TSUSTA | \
- XILINX_AIX_I2C_TSUSTO | \
- XILINX_AIX_I2C_THDSTA | \
- XILINX_AIX_I2C_TSUDAT | \
- XILINX_AIX_I2C_TBUF | \
- XILINX_AIX_I2C_THIGH | \
- XILINX_AIX_I2C_TLOW | \
- XILINX_AIX_I2C_THDDAT)
-typedef struct
-{
- uint32_t valid_mask;
- uint32_t AXI_CLOCK;
- uint32_t SCL_INERTIAL_DELAY;
- uint32_t TSUSTA;
- uint32_t TSUSTO;
- uint32_t THDSTA;
- uint32_t TSUDAT;
- uint32_t TBUF;
- uint32_t THIGH;
- uint32_t TLOW;
- uint32_t THDDAT;
-} xilinx_aix_i2c_timing;
-
-/*
- * Register the driver.
- *
- * The driver can multipex a number of I2C buses (in master mode only) using
- * the GPO port. The PL designer can use the output pins to select a bus. This
- * is useful if connecting a number of slave devices that have limit selectable
- * addresses.
- *
- * @param bus_path The driver's device path.
- * @param register_base AXI base address.
- * @param irq AXI FPGA interrupt.
- * @param gpio_address Bits 12:15 of a slave address it written to the GPO.
- * @param timing Override the default timing. NULL means no changes.
- */
-int i2c_bus_register_xilinx_aix_i2c(const char* bus_path,
- uintptr_t register_base,
- rtems_vector_number irq,
- bool ten_gpio,
- const xilinx_aix_i2c_timing* timing);
-
-#endif
diff --git a/cpukit/dev/include/dev/serial/sc16is752.h b/cpukit/dev/include/dev/serial/sc16is752.h
deleted file mode 100644
index 7e5b47aaa2..0000000000
--- a/cpukit/dev/include/dev/serial/sc16is752.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright (c) 2016 embedded brains GmbH. All rights reserved.
- *
- * embedded brains GmbH
- * Dornierstr. 4
- * 82178 Puchheim
- * Germany
- * <info@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _DEV_SERIAL_SC16IS752_H
-#define _DEV_SERIAL_SC16IS752_H
-
-#include <sys/ioccom.h>
-
-#include <rtems/termiostypes.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/**
- * @defgroup SC16IS752 SC16IS752 Serial Device Driver
- *
- * @ingroup TermiostypesSupport
- */
-
-typedef enum {
- SC16IS752_MODE_RS232,
- SC16IS752_MODE_RS485
-} sc16is752_mode;
-
-typedef struct sc16is752_context sc16is752_context;
-
-/**
- * @brief SC16IS752 device context.
- */
-struct sc16is752_context {
- rtems_termios_device_context base;
-
- /**
- * @brief Writes a register.
- *
- * Internal handler.
- */
- int (*write_reg)(
- sc16is752_context *ctx,
- uint8_t addr,
- const uint8_t *data,
- size_t len
- );
-
- /**
- * @brief Reads a register.
- *
- * Internal handler.
- */
- int (*read_reg)(
- sc16is752_context *ctx,
- uint8_t addr,
- uint8_t *data,
- size_t len
- );
-
- /**
- * @brief Reads two registers.
- *
- * Internal handler.
- */
- int (*read_2_reg)(
- sc16is752_context *ctx,
- uint8_t addr_0,
- uint8_t addr_1,
- uint8_t data[2]
- );
-
- /**
- * @brief First open.
- *
- * Internal handler.
- */
- bool (*first_open)(sc16is752_context *ctx);
-
- /**
- * @brief Last close.
- *
- * Internal handler.
- */
- void (*last_close)(sc16is752_context *ctx);
-
- /**
- * @brief Shall install the interrupt handler.
- *
- * Must be initialized by the user before the device creation.
- */
- bool (*install_irq)(sc16is752_context *ctx);
-
- /**
- * @brief Shall remove the interrupt handler.
- *
- * Must be initialized by the user before the device creation.
- */
- void (*remove_irq)(sc16is752_context *ctx);
-
- /**
- * @brief Device mode.
- *
- * Must be initialized by the user before the device creation.
- */
- sc16is752_mode mode;
-
- /**
- * @brief Input frequency in Hertz (dependent on crystal, see XTAL1 and XTAL2
- * pins).
- *
- * Must be initialized by the user before the device creation.
- */
- uint32_t input_frequency;
-
- /**
- * @brief Corresponding Termios structure.
- *
- * Internal variable.
- */
- rtems_termios_tty *tty;
-
- /**
- * @brief Shadow Interrupt Enable Register (IER).
- *
- * Internal variable.
- */
- uint8_t ier;
-
- /**
- * @brief Characters placed into transmit FIFO.
- *
- * Internal variable.
- */
- uint8_t tx_in_progress;
-
- /**
- * @brief Count of free characters in the transmit FIFO.
- *
- * Internal variable.
- */
- uint8_t tx_fifo_free;
-
- /**
- * @brief Shadow Line Control Register (LCR).
- *
- * Internal variable.
- */
- uint8_t lcr;
-
- /**
- * @brief Shadow Extra Features Control Register (EFCR).
- *
- * Internal variable.
- */
- uint8_t efcr;
-};
-
-/**
- * @brief SC16IS752 SPI context.
- */
-typedef struct {
- sc16is752_context base;
-
- /**
- * @brief The SPI bus device file descriptor.
- *
- * Internal variable.
- */
- int fd;
-
- /**
- * @brief The SPI device chip select.
- *
- * Must be initialized by the user before the call to sc16is752_spi_create().
- */
- uint8_t cs;
-
- /**
- * @brief The SPI bus speed in Hertz.
- *
- * Must be initialized by the user before the call to sc16is752_spi_create().
- */
- uint32_t speed_hz;
-
- /**
- * @brief The SPI bus device path.
- *
- * Must be initialized by the user before the call to sc16is752_spi_create().
- */
- const char *spi_path;
-} sc16is752_spi_context;
-
-/**
- * @brief SC16IS752 I2C context.
- */
-typedef struct {
- sc16is752_context base;
-
- /**
- * @brief The I2C bus device file descriptor.
- *
- * Internal variable.
- */
- int fd;
-
- /**
- * @brief The I2C bus device path.
- *
- * Must be initialized before the call to sc16is752_i2c_create().
- */
- const char *bus_path;
-} sc16is752_i2c_context;
-
-const rtems_termios_device_handler sc16is752_termios_handler;
-
-/**
- * @brief The interrupt handler for receive and transmit operations.
- *
- * @param[in] arg The device context.
- */
-void sc16is752_interrupt_handler(void *arg);
-
-/**
- * @brief Creates an SPI connected SC16IS752 device.
- *
- * @param[in] ctx The SPI SC16IS752 device context.
- * @param[in] device_path The device file path for the new device.
- *
- * @retval RTEMS_SUCCESSFUL Successful operation.
- * @retval other See rtems_termios_device_install().
- */
-rtems_status_code sc16is752_spi_create(
- sc16is752_spi_context *ctx,
- const char *device_path
-);
-
-/**
- * @brief Enables the sleep mode if non-zero, otherwise disables it.
- *
- * The sleep mode is disabled by default.
- */
-#define SC16IS752_SET_SLEEP_MODE _IOW('d', 0, int)
-
-/**
- * @brief Returns non-zero in case the sleep mode is enabled, otherwise zero.
- */
-#define SC16IS752_GET_SLEEP_MODE _IOR('d', 0, int)
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* _DEV_SERIAL_SC16IS752_H */
diff --git a/cpukit/dev/include/dev/spi/spi.h b/cpukit/dev/include/dev/spi/spi.h
deleted file mode 100644
index 66bbac2427..0000000000
--- a/cpukit/dev/include/dev/spi/spi.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/**
- * @file
- *
- * @brief Serial Peripheral Interface (SPI) Driver API
- *
- * @ingroup SPI
- */
-
-/*
- * Copyright (c) 2016 embedded brains GmbH. All rights reserved.
- *
- * embedded brains GmbH
- * Dornierstr. 4
- * 82178 Puchheim
- * Germany
- * <rtems@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _DEV_SPI_SPI_H
-#define _DEV_SPI_SPI_H
-
-#include <linux/spi/spidev.h>
-
-#include <rtems.h>
-#include <rtems/seterr.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-typedef struct spi_ioc_transfer spi_ioc_transfer;
-
-typedef struct spi_bus spi_bus;
-
-/**
- * @defgroup SPI Serial Peripheral Interface (SPI) Driver
- *
- * @brief Serial Peripheral Interface (SPI) bus driver support.
- *
- * @{
- */
-
-/**
- * @brief Obtains the bus.
- *
- * This command has no argument.
- */
-#define SPI_BUS_OBTAIN _IO(SPI_IOC_MAGIC, 13)
-
-/**
- * @brief Releases the bus.
- *
- * This command has no argument.
- */
-#define SPI_BUS_RELEASE _IO(SPI_IOC_MAGIC, 23)
-
-/**
- * @brief SPI bus control.
- */
-struct spi_bus {
- /**
- * @brief Transfers SPI messages.
- *
- * @param[in] bus The bus control.
- * @param[in] msgs The messages to transfer.
- * @param[in] msg_count The count of messages to transfer. It must be
- * positive.
- *
- * @retval 0 Successful operation.
- * @retval negative Negative error number in case of an error.
- */
- int (*transfer)(spi_bus *bus, const spi_ioc_transfer *msgs, uint32_t msg_count);
-
- /**
- * @brief Checks if maximum speed and bits per word are in a valid range
- * for the device
- *
- * @param[in] bus The bus control.
- *
- * @retval 0 Successful operation.
- * @retval negative Negative error number in case of an error.
- */
- int (*setup)(spi_bus *bus);
-
- /**
- * @brief Destroys the bus.
- *
- * @param[in] bus The bus control.
- */
- void (*destroy)(spi_bus *bus);
-
- /**
- * @brief Mutex to protect the bus access.
- */
- rtems_id mutex;
-
- /**
- * @brief Maximum Speed in Hz
- */
- uint32_t max_speed_hz;
-
- /**
- * @brief Indicates the speed of the current device message.
- */
- uint32_t speed_hz;
-
- /**
- * @brief Indicates if chip select must be set high after transfer.
- */
- bool cs_change;
-
- /**
- * @brief Indicates which device is selected by chip select
- */
- uint8_t cs;
-
- /**
- * @brief Indicates the bits per word used on the device.
- */
- uint8_t bits_per_word;
-
- /**
- * @brief Indicates if LSB is supposed to be transmitted first.
- */
- bool lsb_first;
-
- /**
- * @brief Current mode.
- */
- uint32_t mode;
-
- /**
- * @brief Indicates the delay between transfers on different chip select
- * devices.
- */
- uint16_t delay_usecs;
-};
-
-/**
- * @brief Initializes a bus control.
- *
- * After a sucessful initialization the bus control must be destroyed via
- * spi_bus_destroy(). A registered bus control will be automatically destroyed
- * in case the device file is unlinked. Make sure to call spi_bus_destroy() in
- * a custom destruction handler.
- *
- * @param[in] bus The bus control.
- *
- * @retval 0 Successful operation.
- * @retval -1 An error occurred. The errno is set to indicate the error.
- *
- * @see spi_bus_register()
- */
-int spi_bus_init(spi_bus *bus);
-
-/**
- * @brief Allocates a bus control from the heap and initializes it.
- *
- * After a sucessful allocation and initialization the bus control must be
- * destroyed via spi_bus_destroy_and_free(). A registered bus control will be
- * automatically destroyed in case the device file is unlinked. Make sure to
- * call spi_bus_destroy_and_free() in a custom destruction handler.
- *
- * @param[in] size The size of the bus control. This enables the addition of
- * bus controller specific data to the base bus control. The bus control is
- * zero initialized.
- *
- * @retval non-NULL The new bus control.
- * @retval NULL An error occurred. The errno is set to indicate the error.
- *
- * @see spi_bus_register()
- */
-spi_bus *spi_bus_alloc_and_init(size_t size);
-
-/**
- * @brief Destroys a bus control.
- *
- * @param[in] bus The bus control.
- */
-void spi_bus_destroy(spi_bus *bus);
-
-/**
- * @brief Destroys a bus control and frees its memory.
- *
- * @param[in] bus The bus control.
- */
-void spi_bus_destroy_and_free(spi_bus *bus);
-
-/**
- * @brief Registers a bus control.
- *
- * This function claims ownership of the bus control regardless if the
- * registration is successful or not.
- *
- * @param[in] bus The bus control.
- * @param[in] bus_path The path to the bus device file.
- *
- * @retval 0 Successful operation.
- * @retval -1 An error occurred. The errno is set to indicate the error.
- */
-int spi_bus_register(
- spi_bus *bus,
- const char *bus_path
-);
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* _DEV_SPI_SPI_H */
diff --git a/cpukit/dev/include/linux/i2c-dev.h b/cpukit/dev/include/linux/i2c-dev.h
deleted file mode 100644
index c0db3fe06c..0000000000
--- a/cpukit/dev/include/linux/i2c-dev.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/**
- * @file
- *
- * @brief RTEMS Port of Linux I2C Device API
- *
- * @ingroup I2CLinux
- */
-
-/*
- * Copyright (c) 2014 embedded brains GmbH. All rights reserved.
- *
- * embedded brains GmbH
- * Dornierstr. 4
- * 82178 Puchheim
- * Germany
- * <rtems@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _UAPI_LINUX_I2C_DEV_H
-#define _UAPI_LINUX_I2C_DEV_H
-
-#include <stdint.h>
-
-/**
- * @addtogroup I2CLinux
- *
- * @{
- */
-
-/**
- * @name I2C IO Control Commands
- *
- * @{
- */
-
-/**
- * @brief Sets the count of transfer retries in case a slave
- * device does not acknowledge a transaction.
- *
- * The argument type is unsigned long.
- */
-#define I2C_RETRIES 0x701
-
-/**
- * @brief Sets the transfer timeout in 10ms units.
- *
- * The argument type is unsigned long.
- */
-#define I2C_TIMEOUT 0x702
-
-/**
- * @brief Sets the slave address.
- *
- * It is an error to set a slave address already used by another slave device.
- *
- * The argument type is unsigned long.
- */
-#define I2C_SLAVE 0x703
-
-/**
- * @brief Forces setting the slave address.
- *
- * The argument type is unsigned long.
- */
-#define I2C_SLAVE_FORCE 0x706
-
-/**
- * @brief Enables 10-bit addresses if argument is non-zero, otherwise
- * disables 10-bit addresses.
- *
- * The argument type is unsigned long.
- */
-#define I2C_TENBIT 0x704
-
-/**
- * @brief Gets the I2C controller functionality information.
- *
- * The argument type is a pointer to an unsigned long.
- */
-#define I2C_FUNCS 0x705
-
-/**
- * @brief Performs a combined read/write transfer.
- *
- * Only one stop condition is signalled.
- *
- * The argument type is a pointer to struct i2c_rdwr_ioctl_data.
- */
-#define I2C_RDWR 0x707
-
-/**
- * @brief Enables System Management Bus (SMBus) Packet Error Checking (PEC)
- * if argument is non-zero, otherwise disables PEC.
- *
- * The argument type is unsigned long.
- */
-#define I2C_PEC 0x708
-
-/**
- * @brief Performs an SMBus transfer.
- *
- * The argument type is a pointer to struct i2c_smbus_ioctl_data.
- */
-#define I2C_SMBUS 0x720
-
-/** @} */
-
-/**
- * @brief Argument type for I2C_SMBUS IO control call.
- */
-struct i2c_smbus_ioctl_data {
- uint8_t read_write;
- uint8_t command;
- uint32_t size;
- union i2c_smbus_data *data;
-};
-
-/**
- * @brief Argument type for I2C_RDWR IO control call.
- */
-struct i2c_rdwr_ioctl_data {
- struct i2c_msg *msgs;
- uint32_t nmsgs;
-};
-
-/**
- * @brief Maximum count of messages for one IO control call.
- */
-#define I2C_RDRW_IOCTL_MAX_MSGS 42
-
-/** @} */
-
-#endif /* _UAPI_LINUX_I2C_DEV_H */
diff --git a/cpukit/dev/include/linux/i2c.h b/cpukit/dev/include/linux/i2c.h
deleted file mode 100644
index b113545cce..0000000000
--- a/cpukit/dev/include/linux/i2c.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/**
- * @file
- *
- * @brief RTEMS Port of Linux I2C API
- *
- * @ingroup I2CLinux
- */
-
-/*
- * Copyright (c) 2014 embedded brains GmbH. All rights reserved.
- *
- * embedded brains GmbH
- * Dornierstr. 4
- * 82178 Puchheim
- * Germany
- * <rtems@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _UAPI_LINUX_I2C_H
-#define _UAPI_LINUX_I2C_H
-
-#include <stdint.h>
-
-/**
- * @defgroup I2CLinux Linux I2C User-Space API
- *
- * @ingroup I2C
- *
- * @brief RTEMS port of Linux I2C user-space API.
- *
- * Additional documentation is available through the Linux sources, see:
- *
- * - /usr/src/linux/include/uapi/linux/i2c.h,
- * - /usr/src/linux/include/uapi/linux/i2c-dev.h
- * - https://www.kernel.org/doc/Documentation/i2c/i2c-protocol
- * - https://www.kernel.org/doc/Documentation/i2c/dev-interface
- *
- * @{
- */
-
-/**
- * @name I2C Message Flags
- *
- * @{
- */
-
-/**
- * @brief I2C message flag to indicate a 10-bit address.
- *
- * The controller must support this as indicated by the I2C_FUNC_10BIT_ADDR
- * functionality.
- *
- * @see i2c_msg.
- */
-#define I2C_M_TEN 0x0010
-
-/**
- * @brief I2C message flag to indicate a read transfer (from slave to master).
- *
- * @see i2c_msg.
- */
-#define I2C_M_RD 0x0001
-
-/**
- * @brief I2C message flag to signal a stop condition even if this is not the
- * last message.
- *
- * The controller must support this as indicated by the
- * @ref I2C_FUNC_PROTOCOL_MANGLING functionality.
- *
- * @see i2c_msg.
- */
-#define I2C_M_STOP 0x8000
-
-/**
- * @brief I2C message flag to omit start condition and slave address.
- *
- * The controller must support this as indicated by the
- * @ref I2C_FUNC_NOSTART functionality.
- *
- * @see i2c_msg.
- */
-#define I2C_M_NOSTART 0x4000
-
-/**
- * @brief I2C message flag to reverse the direction flag.
- *
- * The controller must support this as indicated by the
- * @ref I2C_FUNC_PROTOCOL_MANGLING functionality.
- *
- * @see i2c_msg.
- */
-#define I2C_M_REV_DIR_ADDR 0x2000
-
-/**
- * @brief I2C message flag to ignore a non-acknowledge.
- *
- * The controller must support this as indicated by the
- * @ref I2C_FUNC_PROTOCOL_MANGLING functionality.
- *
- * @see i2c_msg.
- */
-#define I2C_M_IGNORE_NAK 0x1000
-
-/**
- * @brief I2C message flag to omit a master acknowledge/non-acknowledge in a
- * read transfer.
- *
- * The controller must support this as indicated by the
- * @ref I2C_FUNC_PROTOCOL_MANGLING functionality.
- *
- * @see i2c_msg.
- */
-#define I2C_M_NO_RD_ACK 0x0800
-
-/**
- * @brief I2C message flag to indicate that the message data length is the
- * first received byte.
- *
- * The message data buffer must be large enough to store up to 32 bytes, the
- * initial length byte and the SMBus PEC (if used). Initialize the message
- * length to one. The message length is incremented by the count of received
- * data bytes.
- *
- * @see i2c_msg.
- */
-#define I2C_M_RECV_LEN 0x0400
-
-/** @} */
-
-/**
- * @brief I2C transfer message.
- */
-struct i2c_msg {
- /**
- * @brief The slave address.
- *
- * In case the @ref I2C_M_TEN flag is set, then this is a 10-bit address,
- * otherwise it is a 7-bit address.
- */
- uint16_t addr;
-
- /**
- * @brief The message flags.
- *
- * Valid flags are
- * - @ref I2C_M_TEN,
- * - @ref I2C_M_RD,
- * - @ref I2C_M_STOP,
- * - @ref I2C_M_NOSTART,
- * - @ref I2C_M_REV_DIR_ADDR,
- * - @ref I2C_M_IGNORE_NAK,
- * - @ref I2C_M_NO_RD_ACK, and
- * - @ref I2C_M_RECV_LEN.
- */
- uint16_t flags;
-
- /**
- * @brief The message data length in bytes.
- */
- uint16_t len;
-
- /**
- * @brief Pointer to the message data.
- */
- uint8_t *buf;
-};
-
-/**
- * @name I2C Controller Functionality
- *
- * @{
- */
-
-#define I2C_FUNC_I2C 0x00000001
-#define I2C_FUNC_10BIT_ADDR 0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004
-#define I2C_FUNC_SMBUS_PEC 0x00000008
-#define I2C_FUNC_NOSTART 0x00000010
-#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000
-#define I2C_FUNC_SMBUS_QUICK 0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
-#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000
-#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000
-
-#define I2C_FUNC_SMBUS_BYTE \
- (I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE)
-
-#define I2C_FUNC_SMBUS_BYTE_DATA \
- (I2C_FUNC_SMBUS_READ_BYTE_DATA | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
-
-#define I2C_FUNC_SMBUS_WORD_DATA \
- (I2C_FUNC_SMBUS_READ_WORD_DATA | I2C_FUNC_SMBUS_WRITE_WORD_DATA)
-
-#define I2C_FUNC_SMBUS_BLOCK_DATA \
- (I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
-
-#define I2C_FUNC_SMBUS_I2C_BLOCK \
- (I2C_FUNC_SMBUS_READ_I2C_BLOCK | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
-
-#define I2C_FUNC_SMBUS_EMUL \
- (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA \
- | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL \
- | I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | I2C_FUNC_SMBUS_I2C_BLOCK \
- | I2C_FUNC_SMBUS_PEC)
-
-/** @} */
-
-/**
- * @brief Maximum SMBus data block count.
- */
-#define I2C_SMBUS_BLOCK_MAX 32
-
-/**
- * @brief SMBus data.
- */
-union i2c_smbus_data {
- uint8_t byte;
- uint16_t word;
- uint8_t block[I2C_SMBUS_BLOCK_MAX + 2];
-};
-
-/**
- * @name SMBus Transfer Read and Write Markers
- *
- * @{
- */
-
-#define I2C_SMBUS_READ 1
-
-#define I2C_SMBUS_WRITE 0
-
-/** @} */
-
-/**
- * @name SMBus Transaction Types
- *
- * @{
- */
-
-#define I2C_SMBUS_QUICK 0
-
-#define I2C_SMBUS_BYTE 1
-
-#define I2C_SMBUS_BYTE_DATA 2
-
-#define I2C_SMBUS_WORD_DATA 3
-
-#define I2C_SMBUS_PROC_CALL 4
-
-#define I2C_SMBUS_BLOCK_DATA 5
-
-#define I2C_SMBUS_I2C_BLOCK_BROKEN 6
-
-#define I2C_SMBUS_BLOCK_PROC_CALL 7
-
-#define I2C_SMBUS_I2C_BLOCK_DATA 8
-
-/** @} */
-
-/** @} */
-
-#endif /* _UAPI_LINUX_I2C_H */
diff --git a/cpukit/dev/include/linux/spi/spidev.h b/cpukit/dev/include/linux/spi/spidev.h
deleted file mode 100644
index e2fdb4b7e1..0000000000
--- a/cpukit/dev/include/linux/spi/spidev.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/**
- * @file
- *
- * @brief RTEMS Port of Linux SPI API
- *
- * @ingroup SPILinux
- */
-
-/*
- * Copyright (c) 2016 embedded brains GmbH. All rights reserved.
- *
- * embedded brains GmbH
- * Dornierstr. 4
- * 82178 Puchheim
- * Germany
- * <rtems@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _UAPI_LINUX_SPI_H
-#define _UAPI_LINUX_SPI_H
-
-#include <sys/ioccom.h>
-#include <stddef.h>
-#include <stdint.h>
-
-/**
- * @defgroup SPILinux Linux SPI User-Space API
- *
- * @ingroup SPI
- *
- * @brief RTEMS port of Linux SPI user-space API.
- *
- * Additional documentation is available through the Linux sources, see
- *
- * /usr/src/linux/include/uapi/linux/spidev.h.
- *
- * @{
- */
-
-/**
- * @name SPI Transfer Flags
- *
- * @{
- */
-
-/**
- * @brief SPI transfer flag which sets the clock phase.
- */
-#define SPI_CPHA 0x01
-
-/**
- * @brief SPI transfer flag which sets the clock polarity.
- */
-#define SPI_CPOL 0x02
-
-/**
- * @brief SPI transfer flag which sets SPI Mode 0 (clock starts low, sample on
- * leading edge).
- */
-#define SPI_MODE_0 0
-
-/**
- * @brief SPI transfer flag which sets SPI Mode 0 (clock starts low, sample on
- * trailing edge).
- */
-#define SPI_MODE_1 SPI_CPHA
-
-/**
- * @brief SPI transfer flag which sets SPI Mode 0 (clock starts high, sample on
- * leading edge).
- */
-#define SPI_MODE_2 SPI_CPOL
-
-/**
- * @brief SPI transfer flag which sets SPI Mode 0 (clock starts high, sample on
- * trailing edge).
- */
-#define SPI_MODE_3 (SPI_CPOL | SPI_CPHA)
-
-/**
- * @brief SPI transfer flag which selects the device by setting the chip select
- * line.
- */
-#define SPI_CS_HIGH 0x04
-
-/**
- * @brief SPI transfer flag which triggers data transmission with the LSB being
- * sent first.
- */
-#define SPI_LSB_FIRST 0x08
-
-/**
- * @brief SPI transfer flag which uses a shared wire for master input/slave
- * output as well as master output/slave input.
- */
-#define SPI_3WIRE 0x10
-
-/**
- * @brief SPI transfer flag which initiates the loopback mode.
- */
-#define SPI_LOOP 0x20
-
-/**
- * @brief SPI transfer flag which indicates that no chip select is needed due to
- * only one device on the bus.
- */
-#define SPI_NO_CS 0x40
-
-/**
- * @brief SPI transfer flag which pulls the slave to low level during pause.
- */
-#define SPI_READY 0x80
-
-/**
- * @brief SPI transfer flag which sets up dual mode for transmission.
- */
-#define SPI_TX_DUAL 0x100
-
-/**
- * @brief SPI transfer flag which sets up quad mode for transmission.
- */
-#define SPI_TX_QUAD 0x200
-
-/**
- * @brief SPI transfer flag which sets up dual mode for reception.
- */
-#define SPI_RX_DUAL 0x400
-
-/**
- * @brief SPI transfer flag which sets up quad mode for reception.
- */
-#define SPI_RX_QUAD 0x800
-
-/** @} */
-
-#define SPI_IOC_MAGIC 's'
-
-/**
- * @brief SPI transfer message.
- */
-struct spi_ioc_transfer {
- /**
- * @brief Buffer for receive data.
- */
- void *rx_buf;
-
- /**
- * @brief Buffer for transmit data.
- */
- const void *tx_buf;
-
- /**
- * @brief Length of receive and transmit buffers in bytes.
- */
- size_t len;
-
- /**
- * @brief Sets the bit-rate of the device.
- */
- uint32_t speed_hz;
-
- /**
- * @brief Sets the delay after a transfer before the chip select status is
- * changed and the next transfer is triggered.
- */
- uint16_t delay_usecs;
-
- /**
- * @brief Sets the device wordsize.
- */
- uint8_t bits_per_word;
-
- /**
- * @brief If true, device is deselected after transfer ended and before a new
- * transfer is started.
- */
- uint8_t cs_change;
-
- /**
- * @brief Amount of bits that are used for reading.
- */
- uint8_t rx_nbits;
-
- /**
- * @brief Amount of bits that are used for writing.
- */
- uint8_t tx_nbits;
-
- /**
- * @brief Sets one of the possible modes that can be used for SPI transfers
- * (dependent on clock phase and polarity).
- */
- uint32_t mode;
-
- /**
- * @brief Indicates which device is currently used.
- */
- uint8_t cs;
-};
-
-/**
- * @brief Calculates the size of the SPI message array.
- */
-#define SPI_MSGSIZE(n) \
- (((n) * sizeof(struct spi_ioc_transfer) < IOCPARM_MAX) ? \
- (n) * sizeof(struct spi_ioc_transfer) : 0)
-
-/**
- * @brief Transfers an array with SPI messages.
- */
-#define SPI_IOC_MESSAGE(n) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(n)])
-
-/**
- * @brief Reads the least-significant 8-bits of the SPI default mode.
- */
-#define SPI_IOC_RD_MODE _IOR(SPI_IOC_MAGIC, 1, uint8_t)
-
-/**
- * @brief Writes the SPI default mode (the most-significant 24-bits of the mode are
- * set to zero).
- */
-#define SPI_IOC_WR_MODE _IOW(SPI_IOC_MAGIC, 1, uint8_t)
-
-/**
- * @brief Reads the SPI default least-significant bit first setting.
- */
-#define SPI_IOC_RD_LSB_FIRST _IOR(SPI_IOC_MAGIC, 2, uint8_t)
-
-/**
- * @brief Writes the SPI default least-significant-bit first setting.
- */
-#define SPI_IOC_WR_LSB_FIRST _IOW(SPI_IOC_MAGIC, 2, uint8_t)
-
-/**
- * @brief Reads the SPI default bits per word.
- */
-#define SPI_IOC_RD_BITS_PER_WORD _IOR(SPI_IOC_MAGIC, 3, uint8_t)
-
-/**
- * @brief Writes the SPI default bits per word.
- */
-#define SPI_IOC_WR_BITS_PER_WORD _IOW(SPI_IOC_MAGIC, 3, uint8_t)
-
-/**
- * @brief Reads the SPI default speed in Hz.
- */
-#define SPI_IOC_RD_MAX_SPEED_HZ _IOR(SPI_IOC_MAGIC, 4, uint32_t)
-
-/**
- * @brief Writes the SPI default speed in Hz.
- */
-#define SPI_IOC_WR_MAX_SPEED_HZ _IOW(SPI_IOC_MAGIC, 4, uint32_t)
-
-/**
- * @brief Reads the full 32-bit SPI default mode.
- */
-#define SPI_IOC_RD_MODE32 _IOR(SPI_IOC_MAGIC, 5, uint32_t)
-
-/**
- * @brief Writes the full 32-bit SPI default mode.
- */
-#define SPI_IOC_WR_MODE32 _IOW(SPI_IOC_MAGIC, 5, uint32_t)
-
-#endif /* _UAPI_LINUX_SPI_H */
diff --git a/cpukit/dev/preinstall.am b/cpukit/dev/preinstall.am
deleted file mode 100644
index 4cb1dce127..0000000000
--- a/cpukit/dev/preinstall.am
+++ /dev/null
@@ -1,105 +0,0 @@
-## Automatically generated by ampolish3 - Do not edit
-
-if AMPOLISH3
-$(srcdir)/preinstall.am: Makefile.am
- $(AMPOLISH3) $(srcdir)/Makefile.am > $(srcdir)/preinstall.am
-endif
-
-PREINSTALL_DIRS =
-DISTCLEANFILES = $(PREINSTALL_DIRS)
-
-all-am: $(PREINSTALL_FILES)
-
-PREINSTALL_FILES =
-CLEANFILES = $(PREINSTALL_FILES)
-
-$(PROJECT_INCLUDE)/dev/$(dirstamp):
- @$(MKDIR_P) $(PROJECT_INCLUDE)/dev
- @: > $(PROJECT_INCLUDE)/dev/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/dev/$(dirstamp)
-
-$(PROJECT_INCLUDE)/dev/i2c/$(dirstamp):
- @$(MKDIR_P) $(PROJECT_INCLUDE)/dev/i2c
- @: > $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
-
-$(PROJECT_INCLUDE)/dev/i2c/eeprom.h: include/dev/i2c/eeprom.h $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/i2c/eeprom.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/i2c/eeprom.h
-
-$(PROJECT_INCLUDE)/dev/i2c/fpga-i2c-slave.h: include/dev/i2c/fpga-i2c-slave.h $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/i2c/fpga-i2c-slave.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/i2c/fpga-i2c-slave.h
-
-$(PROJECT_INCLUDE)/dev/i2c/gpio-nxp-pca9535.h: include/dev/i2c/gpio-nxp-pca9535.h $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/i2c/gpio-nxp-pca9535.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/i2c/gpio-nxp-pca9535.h
-
-$(PROJECT_INCLUDE)/dev/i2c/i2c.h: include/dev/i2c/i2c.h $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/i2c/i2c.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/i2c/i2c.h
-
-$(PROJECT_INCLUDE)/dev/i2c/sensor-lm75a.h: include/dev/i2c/sensor-lm75a.h $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/i2c/sensor-lm75a.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/i2c/sensor-lm75a.h
-
-$(PROJECT_INCLUDE)/dev/i2c/switch-nxp-pca9548a.h: include/dev/i2c/switch-nxp-pca9548a.h $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/i2c/switch-nxp-pca9548a.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/i2c/switch-nxp-pca9548a.h
-
-$(PROJECT_INCLUDE)/dev/i2c/xilinx-axi-i2c.h: include/dev/i2c/xilinx-axi-i2c.h $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/i2c/xilinx-axi-i2c.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/i2c/xilinx-axi-i2c.h
-
-$(PROJECT_INCLUDE)/dev/i2c/ti-ads-16bit-adc.h: include/dev/i2c/ti-ads-16bit-adc.h $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/i2c/ti-ads-16bit-adc.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/i2c/ti-ads-16bit-adc.h
-
-$(PROJECT_INCLUDE)/dev/i2c/ti-lm25066a.h: include/dev/i2c/ti-lm25066a.h $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/i2c/ti-lm25066a.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/i2c/ti-lm25066a.h
-
-$(PROJECT_INCLUDE)/dev/i2c/ti-tmp112.h: include/dev/i2c/ti-tmp112.h $(PROJECT_INCLUDE)/dev/i2c/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/i2c/ti-tmp112.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/i2c/ti-tmp112.h
-
-$(PROJECT_INCLUDE)/dev/spi/$(dirstamp):
- @$(MKDIR_P) $(PROJECT_INCLUDE)/dev/spi
- @: > $(PROJECT_INCLUDE)/dev/spi/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/dev/spi/$(dirstamp)
-
-$(PROJECT_INCLUDE)/dev/spi/spi.h: include/dev/spi/spi.h $(PROJECT_INCLUDE)/dev/spi/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/spi/spi.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/spi/spi.h
-
-$(PROJECT_INCLUDE)/dev/serial/$(dirstamp):
- @$(MKDIR_P) $(PROJECT_INCLUDE)/dev/serial
- @: > $(PROJECT_INCLUDE)/dev/serial/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/dev/serial/$(dirstamp)
-
-$(PROJECT_INCLUDE)/dev/serial/sc16is752.h: include/dev/serial/sc16is752.h $(PROJECT_INCLUDE)/dev/serial/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/dev/serial/sc16is752.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/dev/serial/sc16is752.h
-
-$(PROJECT_INCLUDE)/linux/$(dirstamp):
- @$(MKDIR_P) $(PROJECT_INCLUDE)/linux
- @: > $(PROJECT_INCLUDE)/linux/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/linux/$(dirstamp)
-
-$(PROJECT_INCLUDE)/linux/i2c.h: include/linux/i2c.h $(PROJECT_INCLUDE)/linux/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/linux/i2c.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/linux/i2c.h
-
-$(PROJECT_INCLUDE)/linux/i2c-dev.h: include/linux/i2c-dev.h $(PROJECT_INCLUDE)/linux/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/linux/i2c-dev.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/linux/i2c-dev.h
-
-$(PROJECT_INCLUDE)/linux/spi/$(dirstamp):
- @$(MKDIR_P) $(PROJECT_INCLUDE)/linux/spi
- @: > $(PROJECT_INCLUDE)/linux/spi/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/linux/spi/$(dirstamp)
-
-$(PROJECT_INCLUDE)/linux/spi/spidev.h: include/linux/spi/spidev.h $(PROJECT_INCLUDE)/linux/spi/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/linux/spi/spidev.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/linux/spi/spidev.h
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-02 17:36:04 +0000