diff options
Diffstat (limited to 'contrib/crossrpms/patches/newlib-1.14.0-bfinrtems-20060810a.diff')
| -rw-r--r-- | contrib/crossrpms/patches/newlib-1.14.0-bfinrtems-20060810a.diff | 6197 |
1 files changed, 6197 insertions, 0 deletions
diff --git a/contrib/crossrpms/patches/newlib-1.14.0-bfinrtems-20060810a.diff b/contrib/crossrpms/patches/newlib-1.14.0-bfinrtems-20060810a.diff new file mode 100644 index 0000000000..e4be22034e --- /dev/null +++ b/contrib/crossrpms/patches/newlib-1.14.0-bfinrtems-20060810a.diff @@ -0,0 +1,6197 @@ +diff -urN newlib-1.14.0-orig/newlib/configure.host newlib-1.14.0/newlib/configure.host +--- newlib-1.14.0-orig/newlib/configure.host 2006-08-11 10:51:03.000000000 -0500 ++++ newlib-1.14.0/newlib/configure.host 2006-08-11 10:51:33.000000000 -0500 +@@ -96,6 +96,9 @@ + avr*) + newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED -mcall-prologues" + ;; ++ bfin) ++ machine_dir=bfin ++ ;; + cris | crisv32) + machine_dir=cris + ;; +@@ -326,6 +329,9 @@ + have_crt0="no" + fi + ;; ++ bfin-*-*) ++ sys_dir=bfin ++ ;; + crx*) + sys_dir= + ;; +@@ -526,6 +532,9 @@ + avr*) + newlib_cflags="${newlib_cflags} -DNO_EXEC -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES" + ;; ++ bfin*) ++ syscall_dir=syscalls ++ ;; + cris-*-* | crisv32-*-*) + default_newlib_io_long_long="yes" + newlib_cflags="${newlib_cflags} -DHAVE_RENAME -DHAVE_GETTIMEOFDAY -D_USE_WRITE -DCOMPACT_CTYPE" +diff -urN newlib-1.14.0-orig/newlib/libc/include/machine/ieeefp.h newlib-1.14.0/newlib/libc/include/machine/ieeefp.h +--- newlib-1.14.0-orig/newlib/libc/include/machine/ieeefp.h 2006-08-11 10:51:05.000000000 -0500 ++++ newlib-1.14.0/newlib/libc/include/machine/ieeefp.h 2006-08-11 10:51:33.000000000 -0500 +@@ -278,6 +278,10 @@ + #define __IEEE_LITTLE_ENDIAN + #endif + ++#ifdef BFIN ++#define __IEEE_LITTLE_ENDIAN ++#endif ++ + #ifndef __IEEE_BIG_ENDIAN + #ifndef __IEEE_LITTLE_ENDIAN + #error Endianess not declared!! +diff -urN newlib-1.14.0-orig/newlib/libc/machine/bfin/access.c newlib-1.14.0/newlib/libc/machine/bfin/access.c +--- newlib-1.14.0-orig/newlib/libc/machine/bfin/access.c 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/machine/bfin/access.c 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,33 @@ ++/* This is file ACCESS.C */ ++/* ++ * Copyright (C) 1993 DJ Delorie ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms is permitted ++ * provided that the above copyright notice and following paragraph are ++ * duplicated in all such forms. ++ * ++ * This file is distributed WITHOUT ANY WARRANTY; without even the implied ++ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include <fcntl.h> ++#include <sys/stat.h> ++#include <unistd.h> ++ ++int access(const char *fn, int flags) ++{ ++ struct stat s; ++ if (stat(fn, &s)) ++ return -1; ++ if (s.st_mode & S_IFDIR) ++ return 0; ++ if (flags & W_OK) ++ { ++ if (s.st_mode & S_IWRITE) ++ return 0; ++ return -1; ++ } ++ return 0; ++} ++ +diff -urN newlib-1.14.0-orig/newlib/libc/machine/bfin/aclocal.m4 newlib-1.14.0/newlib/libc/machine/bfin/aclocal.m4 +--- newlib-1.14.0-orig/newlib/libc/machine/bfin/aclocal.m4 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/machine/bfin/aclocal.m4 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,366 @@ ++dnl aclocal.m4 generated automatically by aclocal 1.4-p6 ++ ++dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++ ++dnl This program is distributed in the hope that it will be useful, ++dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without ++dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A ++dnl PARTICULAR PURPOSE. ++ ++dnl This provides configure definitions used by all the newlib ++dnl configure.in files. ++ ++dnl Basic newlib configury. This calls basic introductory stuff, ++dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs ++dnl configure.host. The only argument is the relative path to the top ++dnl newlib directory. ++ ++AC_DEFUN(NEWLIB_CONFIGURE, ++[ ++dnl Default to --enable-multilib ++AC_ARG_ENABLE(multilib, ++[ --enable-multilib build many library versions (default)], ++[case "${enableval}" in ++ yes) multilib=yes ;; ++ no) multilib=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; ++ esac], [multilib=yes])dnl ++ ++dnl Support --enable-target-optspace ++AC_ARG_ENABLE(target-optspace, ++[ --enable-target-optspace optimize for space], ++[case "${enableval}" in ++ yes) target_optspace=yes ;; ++ no) target_optspace=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; ++ esac], [target_optspace=])dnl ++ ++dnl Support --enable-malloc-debugging - currently only supported for Cygwin ++AC_ARG_ENABLE(malloc-debugging, ++[ --enable-malloc-debugging indicate malloc debugging requested], ++[case "${enableval}" in ++ yes) malloc_debugging=yes ;; ++ no) malloc_debugging=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; ++ esac], [malloc_debugging=])dnl ++ ++dnl Support --enable-newlib-multithread ++AC_ARG_ENABLE(newlib-multithread, ++[ --enable-newlib-multithread enable support for multiple threads], ++[case "${enableval}" in ++ yes) newlib_multithread=yes ;; ++ no) newlib_multithread=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;; ++ esac], [newlib_multithread=yes])dnl ++ ++dnl Support --enable-newlib-iconv ++AC_ARG_ENABLE(newlib-iconv, ++[ --enable-newlib-iconv enable iconv library support], ++[if test "${newlib_iconv+set}" != set; then ++ case "${enableval}" in ++ yes) newlib_iconv=yes ;; ++ no) newlib_iconv=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;; ++ esac ++ fi], [newlib_iconv=${newlib_iconv}])dnl ++ ++dnl Support --enable-newlib-elix-level ++AC_ARG_ENABLE(newlib-elix-level, ++[ --enable-newlib-elix-level supply desired elix library level (1-4)], ++[case "${enableval}" in ++ 0) newlib_elix_level=0 ;; ++ 1) newlib_elix_level=1 ;; ++ 2) newlib_elix_level=2 ;; ++ 3) newlib_elix_level=3 ;; ++ 4) newlib_elix_level=4 ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;; ++ esac], [newlib_elix_level=0])dnl ++ ++dnl Support --disable-newlib-io-float ++AC_ARG_ENABLE(newlib-io-float, ++[ --disable-newlib-io-float disable printf/scanf family float support], ++[case "${enableval}" in ++ yes) newlib_io_float=yes ;; ++ no) newlib_io_float=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;; ++ esac], [newlib_io_float=yes])dnl ++ ++dnl Support --disable-newlib-supplied-syscalls ++AC_ARG_ENABLE(newlib-supplied-syscalls, ++[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls], ++[case "${enableval}" in ++ yes) newlib_may_supply_syscalls=yes ;; ++ no) newlib_may_supply_syscalls=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;; ++ esac], [newlib_may_supply_syscalls=yes])dnl ++ ++AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes) ++ ++dnl We may get other options which we don't document: ++dnl --with-target-subdir, --with-multisrctop, --with-multisubdir ++ ++test -z "[$]{with_target_subdir}" && with_target_subdir=. ++ ++if test "[$]{srcdir}" = "."; then ++ if test "[$]{with_target_subdir}" != "."; then ++ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" ++ else ++ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" ++ fi ++else ++ newlib_basedir="[$]{srcdir}/$1" ++fi ++AC_SUBST(newlib_basedir) ++ ++AC_CANONICAL_SYSTEM ++ ++AM_INIT_AUTOMAKE(newlib, 1.12.0) ++ ++# FIXME: We temporarily define our own version of AC_PROG_CC. This is ++# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We ++# are probably using a cross compiler, which will not be able to fully ++# link an executable. This should really be fixed in autoconf ++# itself. ++ ++AC_DEFUN(LIB_AC_PROG_CC, ++[AC_BEFORE([$0], [AC_PROG_CPP])dnl ++AC_CHECK_PROG(CC, gcc, gcc) ++if test -z "$CC"; then ++ AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) ++ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) ++fi ++ ++AC_PROG_CC_GNU ++ ++if test $ac_cv_prog_gcc = yes; then ++ GCC=yes ++dnl Check whether -g works, even if CFLAGS is set, in case the package ++dnl plays around with CFLAGS (such as to build both debugging and ++dnl normal versions of a library), tasteless as that idea is. ++ ac_test_CFLAGS="${CFLAGS+set}" ++ ac_save_CFLAGS="$CFLAGS" ++ CFLAGS= ++ AC_PROG_CC_G ++ if test "$ac_test_CFLAGS" = set; then ++ CFLAGS="$ac_save_CFLAGS" ++ elif test $ac_cv_prog_cc_g = yes; then ++ CFLAGS="-g -O2" ++ else ++ CFLAGS="-O2" ++ fi ++else ++ GCC= ++ test "${CFLAGS+set}" = set || CFLAGS="-g" ++fi ++]) ++ ++LIB_AC_PROG_CC ++ ++AC_CHECK_TOOL(AS, as) ++AC_CHECK_TOOL(AR, ar) ++AC_CHECK_TOOL(RANLIB, ranlib, :) ++ ++AC_PROG_INSTALL ++ ++AM_MAINTAINER_MODE ++ ++# We need AC_EXEEXT to keep automake happy in cygnus mode. However, ++# at least currently, we never actually build a program, so we never ++# need to use $(EXEEXT). Moreover, the test for EXEEXT normally ++# fails, because we are probably configuring with a cross compiler ++# which can't create executables. So we include AC_EXEEXT to keep ++# automake happy, but we don't execute it, since we don't care about ++# the result. ++if false; then ++ AC_EXEEXT ++fi ++ ++. [$]{newlib_basedir}/configure.host ++ ++newlib_cflags="[$]{newlib_cflags} -fno-builtin" ++ ++NEWLIB_CFLAGS=${newlib_cflags} ++AC_SUBST(NEWLIB_CFLAGS) ++ ++LDFLAGS=${ldflags} ++AC_SUBST(LDFLAGS) ++ ++AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0) ++AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1) ++AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2) ++AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3) ++AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4) ++ ++AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes) ++ ++# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we ++# use oext, which is set in configure.host based on the target platform. ++OBJEXT=${oext} ++ ++AC_SUBST(OBJEXT) ++AC_SUBST(oext) ++AC_SUBST(aext) ++ ++AC_SUBST(libm_machine_dir) ++AC_SUBST(machine_dir) ++AC_SUBST(sys_dir) ++]) ++ ++# Do all the work for Automake. This macro actually does too much -- ++# some checks are only needed if your package does certain things. ++# But this isn't really a big deal. ++ ++# serial 1 ++ ++dnl Usage: ++dnl AM_INIT_AUTOMAKE(package,version, [no-define]) ++ ++AC_DEFUN([AM_INIT_AUTOMAKE], ++[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL]) ++PACKAGE=[$1] ++AC_SUBST(PACKAGE) ++VERSION=[$2] ++AC_SUBST(VERSION) ++dnl test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++fi ++ifelse([$3],, ++AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) ++AC_REQUIRE([AM_SANITY_CHECK]) ++AC_REQUIRE([AC_ARG_PROGRAM]) ++dnl FIXME This is truly gross. ++missing_dir=`cd $ac_aux_dir && pwd` ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) ++AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) ++AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) ++AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) ++AC_REQUIRE([AC_PROG_MAKE_SET])]) ++ ++# Copyright 2002 Free Software Foundation, Inc. ++ ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2, or (at your option) ++# any later version. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++ ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ++ ++# AM_AUTOMAKE_VERSION(VERSION) ++# ---------------------------- ++# Automake X.Y traces this macro to ensure aclocal.m4 has been ++# generated from the m4 files accompanying Automake X.Y. ++AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) ++ ++# AM_SET_CURRENT_AUTOMAKE_VERSION ++# ------------------------------- ++# Call AM_AUTOMAKE_VERSION so it can be traced. ++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ++ [AM_AUTOMAKE_VERSION([1.4-p6])]) ++ ++# ++# Check to make sure that the build environment is sane. ++# ++ ++AC_DEFUN([AM_SANITY_CHECK], ++[AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftestfile ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` ++ if test "[$]*" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftestfile` ++ fi ++ if test "[$]*" != "X $srcdir/configure conftestfile" \ ++ && test "[$]*" != "X conftestfile $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi ++ ++ test "[$]2" = conftestfile ++ ) ++then ++ # Ok. ++ : ++else ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) ++fi ++rm -f conftest* ++AC_MSG_RESULT(yes)]) ++ ++dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) ++dnl The program must properly implement --version. ++AC_DEFUN([AM_MISSING_PROG], ++[AC_MSG_CHECKING(for working $2) ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if ($2 --version) < /dev/null > /dev/null 2>&1; then ++ $1=$2 ++ AC_MSG_RESULT(found) ++else ++ $1="$3/missing $2" ++ AC_MSG_RESULT(missing) ++fi ++AC_SUBST($1)]) ++ ++# Define a conditional. ++ ++AC_DEFUN([AM_CONDITIONAL], ++[AC_SUBST($1_TRUE) ++AC_SUBST($1_FALSE) ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' ++else ++ $1_TRUE='#' ++ $1_FALSE= ++fi]) ++ ++# Add --enable-maintainer-mode option to configure. ++# From Jim Meyering ++ ++# serial 1 ++ ++AC_DEFUN([AM_MAINTAINER_MODE], ++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) ++ dnl maintainer-mode is disabled by default ++ AC_ARG_ENABLE(maintainer-mode, ++[ --enable-maintainer-mode enable make rules and dependencies not useful ++ (and sometimes confusing) to the casual installer], ++ USE_MAINTAINER_MODE=$enableval, ++ USE_MAINTAINER_MODE=no) ++ AC_MSG_RESULT($USE_MAINTAINER_MODE) ++ AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) ++ MAINT=$MAINTAINER_MODE_TRUE ++ AC_SUBST(MAINT)dnl ++] ++) ++ +diff -urN newlib-1.14.0-orig/newlib/libc/machine/bfin/configure newlib-1.14.0/newlib/libc/machine/bfin/configure +--- newlib-1.14.0-orig/newlib/libc/machine/bfin/configure 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/machine/bfin/configure 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,1880 @@ ++#! /bin/sh ++ ++# Guess values for system-dependent variables and create Makefiles. ++# Generated automatically using autoconf version 2.13 ++# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. ++# ++# This configure script is free software; the Free Software Foundation ++# gives unlimited permission to copy, distribute and modify it. ++ ++# Defaults: ++ac_help= ++ac_default_prefix=/usr/local ++# Any additions from configure.in: ++ac_help="$ac_help ++ --enable-multilib build many library versions (default)" ++ac_help="$ac_help ++ --enable-target-optspace optimize for space" ++ac_help="$ac_help ++ --enable-malloc-debugging indicate malloc debugging requested" ++ac_help="$ac_help ++ --enable-newlib-multithread enable support for multiple threads" ++ac_help="$ac_help ++ --enable-newlib-iconv enable iconv library support" ++ac_help="$ac_help ++ --enable-newlib-elix-level supply desired elix library level (1-4)" ++ac_help="$ac_help ++ --disable-newlib-io-float disable printf/scanf family float support" ++ac_help="$ac_help ++ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls" ++ac_help="$ac_help ++ --enable-maintainer-mode enable make rules and dependencies not useful ++ (and sometimes confusing) to the casual installer" ++ ++# Initialize some variables set by options. ++# The variables have the same names as the options, with ++# dashes changed to underlines. ++build=NONE ++cache_file=./config.cache ++exec_prefix=NONE ++host=NONE ++no_create= ++nonopt=NONE ++no_recursion= ++prefix=NONE ++program_prefix=NONE ++program_suffix=NONE ++program_transform_name=s,x,x, ++silent= ++site= ++srcdir= ++target=NONE ++verbose= ++x_includes=NONE ++x_libraries=NONE ++bindir='${exec_prefix}/bin' ++sbindir='${exec_prefix}/sbin' ++libexecdir='${exec_prefix}/libexec' ++datadir='${prefix}/share' ++sysconfdir='${prefix}/etc' ++sharedstatedir='${prefix}/com' ++localstatedir='${prefix}/var' ++libdir='${exec_prefix}/lib' ++includedir='${prefix}/include' ++oldincludedir='/usr/include' ++infodir='${prefix}/info' ++mandir='${prefix}/man' ++ ++# Initialize some other variables. ++subdirs= ++MFLAGS= MAKEFLAGS= ++SHELL=${CONFIG_SHELL-/bin/sh} ++# Maximum number of lines to put in a shell here document. ++ac_max_here_lines=12 ++ ++ac_prev= ++for ac_option ++do ++ ++ # If the previous option needs an argument, assign it. ++ if test -n "$ac_prev"; then ++ eval "$ac_prev=\$ac_option" ++ ac_prev= ++ continue ++ fi ++ ++ case "$ac_option" in ++ -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; ++ *) ac_optarg= ;; ++ esac ++ ++ # Accept the important Cygnus configure options, so we can diagnose typos. ++ ++ case "$ac_option" in ++ ++ -bindir | --bindir | --bindi | --bind | --bin | --bi) ++ ac_prev=bindir ;; ++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) ++ bindir="$ac_optarg" ;; ++ ++ -build | --build | --buil | --bui | --bu) ++ ac_prev=build ;; ++ -build=* | --build=* | --buil=* | --bui=* | --bu=*) ++ build="$ac_optarg" ;; ++ ++ -cache-file | --cache-file | --cache-fil | --cache-fi \ ++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ++ ac_prev=cache_file ;; ++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ ++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) ++ cache_file="$ac_optarg" ;; ++ ++ -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ ac_prev=datadir ;; ++ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ ++ | --da=*) ++ datadir="$ac_optarg" ;; ++ ++ -disable-* | --disable-*) ++ ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` ++ # Reject names that are not valid shell variable names. ++ if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then ++ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } ++ fi ++ ac_feature=`echo $ac_feature| sed 's/-/_/g'` ++ eval "enable_${ac_feature}=no" ;; ++ ++ -enable-* | --enable-*) ++ ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` ++ # Reject names that are not valid shell variable names. ++ if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then ++ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } ++ fi ++ ac_feature=`echo $ac_feature| sed 's/-/_/g'` ++ case "$ac_option" in ++ *=*) ;; ++ *) ac_optarg=yes ;; ++ esac ++ eval "enable_${ac_feature}='$ac_optarg'" ;; ++ ++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ ++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ ++ | --exec | --exe | --ex) ++ ac_prev=exec_prefix ;; ++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ ++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ ++ | --exec=* | --exe=* | --ex=*) ++ exec_prefix="$ac_optarg" ;; ++ ++ -gas | --gas | --ga | --g) ++ # Obsolete; use --with-gas. ++ with_gas=yes ;; ++ ++ -help | --help | --hel | --he) ++ # Omit some internal or obsolete options to make the list less imposing. ++ # This message is too long to be a string in the A/UX 3.1 sh. ++ cat << EOF ++Usage: configure [options] [host] ++Options: [defaults in brackets after descriptions] ++Configuration: ++ --cache-file=FILE cache test results in FILE ++ --help print this message ++ --no-create do not create output files ++ --quiet, --silent do not print \`checking...' messages ++ --version print the version of autoconf that created configure ++Directory and file names: ++ --prefix=PREFIX install architecture-independent files in PREFIX ++ [$ac_default_prefix] ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ++ [same as prefix] ++ --bindir=DIR user executables in DIR [EPREFIX/bin] ++ --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] ++ --libexecdir=DIR program executables in DIR [EPREFIX/libexec] ++ --datadir=DIR read-only architecture-independent data in DIR ++ [PREFIX/share] ++ --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data in DIR ++ [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] ++ --libdir=DIR object code libraries in DIR [EPREFIX/lib] ++ --includedir=DIR C header files in DIR [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] ++ --infodir=DIR info documentation in DIR [PREFIX/info] ++ --mandir=DIR man documentation in DIR [PREFIX/man] ++ --srcdir=DIR find the sources in DIR [configure dir or ..] ++ --program-prefix=PREFIX prepend PREFIX to installed program names ++ --program-suffix=SUFFIX append SUFFIX to installed program names ++ --program-transform-name=PROGRAM ++ run sed PROGRAM on installed program names ++EOF ++ cat << EOF ++Host type: ++ --build=BUILD configure for building on BUILD [BUILD=HOST] ++ --host=HOST configure for HOST [guessed] ++ --target=TARGET configure for TARGET [TARGET=HOST] ++Features and packages: ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] ++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) ++ --x-includes=DIR X include files are in DIR ++ --x-libraries=DIR X library files are in DIR ++EOF ++ if test -n "$ac_help"; then ++ echo "--enable and --with options recognized:$ac_help" ++ fi ++ exit 0 ;; ++ ++ -host | --host | --hos | --ho) ++ ac_prev=host ;; ++ -host=* | --host=* | --hos=* | --ho=*) ++ host="$ac_optarg" ;; ++ ++ -includedir | --includedir | --includedi | --included | --include \ ++ | --includ | --inclu | --incl | --inc) ++ ac_prev=includedir ;; ++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ ++ | --includ=* | --inclu=* | --incl=* | --inc=*) ++ includedir="$ac_optarg" ;; ++ ++ -infodir | --infodir | --infodi | --infod | --info | --inf) ++ ac_prev=infodir ;; ++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) ++ infodir="$ac_optarg" ;; ++ ++ -libdir | --libdir | --libdi | --libd) ++ ac_prev=libdir ;; ++ -libdir=* | --libdir=* | --libdi=* | --libd=*) ++ libdir="$ac_optarg" ;; ++ ++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ ++ | --libexe | --libex | --libe) ++ ac_prev=libexecdir ;; ++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ ++ | --libexe=* | --libex=* | --libe=*) ++ libexecdir="$ac_optarg" ;; ++ ++ -localstatedir | --localstatedir | --localstatedi | --localstated \ ++ | --localstate | --localstat | --localsta | --localst \ ++ | --locals | --local | --loca | --loc | --lo) ++ ac_prev=localstatedir ;; ++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ ++ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ++ localstatedir="$ac_optarg" ;; ++ ++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ++ ac_prev=mandir ;; ++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) ++ mandir="$ac_optarg" ;; ++ ++ -nfp | --nfp | --nf) ++ # Obsolete; use --without-fp. ++ with_fp=no ;; ++ ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ++ | --no-cr | --no-c) ++ no_create=yes ;; ++ ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ++ no_recursion=yes ;; ++ ++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ ++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ ++ | --oldin | --oldi | --old | --ol | --o) ++ ac_prev=oldincludedir ;; ++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ ++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ ++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) ++ oldincludedir="$ac_optarg" ;; ++ ++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ++ ac_prev=prefix ;; ++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ++ prefix="$ac_optarg" ;; ++ ++ -program-prefix | --program-prefix | --program-prefi | --program-pref \ ++ | --program-pre | --program-pr | --program-p) ++ ac_prev=program_prefix ;; ++ -program-prefix=* | --program-prefix=* | --program-prefi=* \ ++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) ++ program_prefix="$ac_optarg" ;; ++ ++ -program-suffix | --program-suffix | --program-suffi | --program-suff \ ++ | --program-suf | --program-su | --program-s) ++ ac_prev=program_suffix ;; ++ -program-suffix=* | --program-suffix=* | --program-suffi=* \ ++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) ++ program_suffix="$ac_optarg" ;; ++ ++ -program-transform-name | --program-transform-name \ ++ | --program-transform-nam | --program-transform-na \ ++ | --program-transform-n | --program-transform- \ ++ | --program-transform | --program-transfor \ ++ | --program-transfo | --program-transf \ ++ | --program-trans | --program-tran \ ++ | --progr-tra | --program-tr | --program-t) ++ ac_prev=program_transform_name ;; ++ -program-transform-name=* | --program-transform-name=* \ ++ | --program-transform-nam=* | --program-transform-na=* \ ++ | --program-transform-n=* | --program-transform-=* \ ++ | --program-transform=* | --program-transfor=* \ ++ | --program-transfo=* | --program-transf=* \ ++ | --program-trans=* | --program-tran=* \ ++ | --progr-tra=* | --program-tr=* | --program-t=*) ++ program_transform_name="$ac_optarg" ;; ++ ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ silent=yes ;; ++ ++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ++ ac_prev=sbindir ;; ++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ ++ | --sbi=* | --sb=*) ++ sbindir="$ac_optarg" ;; ++ ++ -sharedstatedir | --sharedstatedir | --sharedstatedi \ ++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ ++ | --sharedst | --shareds | --shared | --share | --shar \ ++ | --sha | --sh) ++ ac_prev=sharedstatedir ;; ++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ ++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ ++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ ++ | --sha=* | --sh=*) ++ sharedstatedir="$ac_optarg" ;; ++ ++ -site | --site | --sit) ++ ac_prev=site ;; ++ -site=* | --site=* | --sit=*) ++ site="$ac_optarg" ;; ++ ++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ++ ac_prev=srcdir ;; ++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ++ srcdir="$ac_optarg" ;; ++ ++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ ++ | --syscon | --sysco | --sysc | --sys | --sy) ++ ac_prev=sysconfdir ;; ++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ ++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) ++ sysconfdir="$ac_optarg" ;; ++ ++ -target | --target | --targe | --targ | --tar | --ta | --t) ++ ac_prev=target ;; ++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) ++ target="$ac_optarg" ;; ++ ++ -v | -verbose | --verbose | --verbos | --verbo | --verb) ++ verbose=yes ;; ++ ++ -version | --version | --versio | --versi | --vers) ++ echo "configure generated by autoconf version 2.13" ++ exit 0 ;; ++ ++ -with-* | --with-*) ++ ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` ++ # Reject names that are not valid shell variable names. ++ if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then ++ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } ++ fi ++ ac_package=`echo $ac_package| sed 's/-/_/g'` ++ case "$ac_option" in ++ *=*) ;; ++ *) ac_optarg=yes ;; ++ esac ++ eval "with_${ac_package}='$ac_optarg'" ;; ++ ++ -without-* | --without-*) ++ ac_package=`echo $ac_option|sed -e 's/-*without-//'` ++ # Reject names that are not valid shell variable names. ++ if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then ++ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } ++ fi ++ ac_package=`echo $ac_package| sed 's/-/_/g'` ++ eval "with_${ac_package}=no" ;; ++ ++ --x) ++ # Obsolete; use --with-x. ++ with_x=yes ;; ++ ++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ ++ | --x-incl | --x-inc | --x-in | --x-i) ++ ac_prev=x_includes ;; ++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ ++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) ++ x_includes="$ac_optarg" ;; ++ ++ -x-libraries | --x-libraries | --x-librarie | --x-librari \ ++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ++ ac_prev=x_libraries ;; ++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ ++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) ++ x_libraries="$ac_optarg" ;; ++ ++ -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ++ ;; ++ ++ *) ++ if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then ++ echo "configure: warning: $ac_option: invalid host type" 1>&2 ++ fi ++ if test "x$nonopt" != xNONE; then ++ { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ++ fi ++ nonopt="$ac_option" ++ ;; ++ ++ esac ++done ++ ++if test -n "$ac_prev"; then ++ { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } ++fi ++ ++trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 ++ ++# File descriptor usage: ++# 0 standard input ++# 1 file creation ++# 2 errors and warnings ++# 3 some systems may open it to /dev/tty ++# 4 used on the Kubota Titan ++# 6 checking for... messages and results ++# 5 compiler messages saved in config.log ++if test "$silent" = yes; then ++ exec 6>/dev/null ++else ++ exec 6>&1 ++fi ++exec 5>./config.log ++ ++echo "\ ++This file contains any messages produced by compilers while ++running configure, to aid debugging if configure makes a mistake. ++" 1>&5 ++ ++# Strip out --no-create and --no-recursion so they do not pile up. ++# Also quote any args containing shell metacharacters. ++ac_configure_args= ++for ac_arg ++do ++ case "$ac_arg" in ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ++ | --no-cr | --no-c) ;; ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; ++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ++ ac_configure_args="$ac_configure_args '$ac_arg'" ;; ++ *) ac_configure_args="$ac_configure_args $ac_arg" ;; ++ esac ++done ++ ++# NLS nuisances. ++# Only set these to C if already set. These must not be set unconditionally ++# because not all systems understand e.g. LANG=C (notably SCO). ++# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! ++# Non-C LC_CTYPE values break the ctype check. ++if test "${LANG+set}" = set; then LANG=C; export LANG; fi ++if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi ++if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi ++if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi ++ ++# confdefs.h avoids OS command line length limits that DEFS can exceed. ++rm -rf conftest* confdefs.h ++# AIX cpp loses on an empty file, so make sure it contains at least a newline. ++echo > confdefs.h ++ ++# A filename unique to this package, relative to the directory that ++# configure is in, which we can look for to find out if srcdir is correct. ++ac_unique_file=Makefile.am ++ ++# Find the source files, if location was not specified. ++if test -z "$srcdir"; then ++ ac_srcdir_defaulted=yes ++ # Try the directory containing this script, then its parent. ++ ac_prog=$0 ++ ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` ++ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. ++ srcdir=$ac_confdir ++ if test ! -r $srcdir/$ac_unique_file; then ++ srcdir=.. ++ fi ++else ++ ac_srcdir_defaulted=no ++fi ++if test ! -r $srcdir/$ac_unique_file; then ++ if test "$ac_srcdir_defaulted" = yes; then ++ { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } ++ else ++ { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } ++ fi ++fi ++srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` ++ ++# Prefer explicitly selected file to automatically selected ones. ++if test -z "$CONFIG_SITE"; then ++ if test "x$prefix" != xNONE; then ++ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" ++ else ++ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" ++ fi ++fi ++for ac_site_file in $CONFIG_SITE; do ++ if test -r "$ac_site_file"; then ++ echo "loading site script $ac_site_file" ++ . "$ac_site_file" ++ fi ++done ++ ++if test -r "$cache_file"; then ++ echo "loading cache $cache_file" ++ . $cache_file ++else ++ echo "creating cache $cache_file" ++ > $cache_file ++fi ++ ++ac_ext=c ++# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ++ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ++cross_compiling=$ac_cv_prog_cc_cross ++ ++ac_exeext= ++ac_objext=o ++if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then ++ # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. ++ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ++ ac_n= ac_c=' ++' ac_t=' ' ++ else ++ ac_n=-n ac_c= ac_t= ++ fi ++else ++ ac_n= ac_c='\c' ac_t= ++fi ++ ++ ++ ++ac_aux_dir= ++for ac_dir in ../../../.. $srcdir/../../../..; do ++ if test -f $ac_dir/install-sh; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install-sh -c" ++ break ++ elif test -f $ac_dir/install.sh; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install.sh -c" ++ break ++ fi ++done ++if test -z "$ac_aux_dir"; then ++ { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; } ++fi ++ac_config_guess=$ac_aux_dir/config.guess ++ac_config_sub=$ac_aux_dir/config.sub ++ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. ++ ++ ++am__api_version="1.4" ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# ./install, which can be erroneously created by make from ./install.sh. ++echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 ++echo "configure:578: checking for a BSD compatible install" >&5 ++if test -z "$INSTALL"; then ++if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" ++ for ac_dir in $PATH; do ++ # Account for people who put trailing slashes in PATH elements. ++ case "$ac_dir/" in ++ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ if test -f $ac_dir/$ac_prog; then ++ if test $ac_prog = install && ++ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ else ++ ac_cv_path_install="$ac_dir/$ac_prog -c" ++ break 2 ++ fi ++ fi ++ done ++ ;; ++ esac ++ done ++ IFS="$ac_save_IFS" ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL="$ac_cv_path_install" ++ else ++ # As a last resort, use the slow shell script. We don't cache a ++ # path for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the path is relative. ++ INSTALL="$ac_install_sh" ++ fi ++fi ++echo "$ac_t""$INSTALL" 1>&6 ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 ++echo "configure:631: checking whether build environment is sane" >&5 ++# Just in case ++sleep 1 ++echo timestamp > conftestfile ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` ++ if test "$*" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftestfile` ++ fi ++ if test "$*" != "X $srcdir/configure conftestfile" \ ++ && test "$*" != "X conftestfile $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ { echo "configure: error: ls -t appears to fail. Make sure there is not a broken ++alias in your environment" 1>&2; exit 1; } ++ fi ++ ++ test "$2" = conftestfile ++ ) ++then ++ # Ok. ++ : ++else ++ { echo "configure: error: newly created file is older than distributed files! ++Check your system clock" 1>&2; exit 1; } ++fi ++rm -f conftest* ++echo "$ac_t""yes" 1>&6 ++if test "$program_transform_name" = s,x,x,; then ++ program_transform_name= ++else ++ # Double any \ or $. echo might interpret backslashes. ++ cat <<\EOF_SED > conftestsed ++s,\\,\\\\,g; s,\$,$$,g ++EOF_SED ++ program_transform_name="`echo $program_transform_name|sed -f conftestsed`" ++ rm -f conftestsed ++fi ++test "$program_prefix" != NONE && ++ program_transform_name="s,^,${program_prefix},; $program_transform_name" ++# Use a double $ so make ignores it. ++test "$program_suffix" != NONE && ++ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" ++ ++# sed with no file args requires a program. ++test "$program_transform_name" = "" && program_transform_name="s,x,x," ++ ++echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 ++echo "configure:688: checking whether ${MAKE-make} sets \${MAKE}" >&5 ++set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` ++if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ cat > conftestmake <<\EOF ++all: ++ @echo 'ac_maketemp="${MAKE}"' ++EOF ++# GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` ++if test -n "$ac_maketemp"; then ++ eval ac_cv_prog_make_${ac_make}_set=yes ++else ++ eval ac_cv_prog_make_${ac_make}_set=no ++fi ++rm -f conftestmake ++fi ++if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then ++ echo "$ac_t""yes" 1>&6 ++ SET_MAKE= ++else ++ echo "$ac_t""no" 1>&6 ++ SET_MAKE="MAKE=${MAKE-make}" ++fi ++ ++if test $host != $build; then ++ ac_tool_prefix=${host_alias}- ++else ++ ac_tool_prefix= ++fi ++ ++echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 ++echo "configure:721: checking for Cygwin environment" >&5 ++if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ cat > conftest.$ac_ext <<EOF ++#line 726 "configure" ++#include "confdefs.h" ++ ++int main() { ++ ++#ifndef __CYGWIN__ ++#define __CYGWIN__ __CYGWIN32__ ++#endif ++return __CYGWIN__; ++; return 0; } ++EOF ++if { (eval echo configure:737: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then ++ rm -rf conftest* ++ ac_cv_cygwin=yes ++else ++ echo "configure: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 ++ rm -rf conftest* ++ ac_cv_cygwin=no ++fi ++rm -f conftest* ++rm -f conftest* ++fi ++ ++echo "$ac_t""$ac_cv_cygwin" 1>&6 ++CYGWIN= ++test "$ac_cv_cygwin" = yes && CYGWIN=yes ++echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 ++echo "configure:754: checking for mingw32 environment" >&5 ++if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ cat > conftest.$ac_ext <<EOF ++#line 759 "configure" ++#include "confdefs.h" ++ ++int main() { ++return __MINGW32__; ++; return 0; } ++EOF ++if { (eval echo configure:766: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then ++ rm -rf conftest* ++ ac_cv_mingw32=yes ++else ++ echo "configure: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 ++ rm -rf conftest* ++ ac_cv_mingw32=no ++fi ++rm -f conftest* ++rm -f conftest* ++fi ++ ++echo "$ac_t""$ac_cv_mingw32" 1>&6 ++MINGW32= ++test "$ac_cv_mingw32" = yes && MINGW32=yes ++ ++# Check whether --enable-multilib or --disable-multilib was given. ++if test "${enable_multilib+set}" = set; then ++ enableval="$enable_multilib" ++ case "${enableval}" in ++ yes) multilib=yes ;; ++ no) multilib=no ;; ++ *) { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;; ++ esac ++else ++ multilib=yes ++fi ++ ++# Check whether --enable-target-optspace or --disable-target-optspace was given. ++if test "${enable_target_optspace+set}" = set; then ++ enableval="$enable_target_optspace" ++ case "${enableval}" in ++ yes) target_optspace=yes ;; ++ no) target_optspace=no ;; ++ *) { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;; ++ esac ++else ++ target_optspace= ++fi ++ ++# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. ++if test "${enable_malloc_debugging+set}" = set; then ++ enableval="$enable_malloc_debugging" ++ case "${enableval}" in ++ yes) malloc_debugging=yes ;; ++ no) malloc_debugging=no ;; ++ *) { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;; ++ esac ++else ++ malloc_debugging= ++fi ++ ++# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given. ++if test "${enable_newlib_multithread+set}" = set; then ++ enableval="$enable_newlib_multithread" ++ case "${enableval}" in ++ yes) newlib_multithread=yes ;; ++ no) newlib_multithread=no ;; ++ *) { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;; ++ esac ++else ++ newlib_multithread=yes ++fi ++ ++# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given. ++if test "${enable_newlib_iconv+set}" = set; then ++ enableval="$enable_newlib_iconv" ++ if test "${newlib_iconv+set}" != set; then ++ case "${enableval}" in ++ yes) newlib_iconv=yes ;; ++ no) newlib_iconv=no ;; ++ *) { echo "configure: error: bad value ${enableval} for newlib-iconv option" 1>&2; exit 1; } ;; ++ esac ++ fi ++else ++ newlib_iconv=${newlib_iconv} ++fi ++ ++# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given. ++if test "${enable_newlib_elix_level+set}" = set; then ++ enableval="$enable_newlib_elix_level" ++ case "${enableval}" in ++ 0) newlib_elix_level=0 ;; ++ 1) newlib_elix_level=1 ;; ++ 2) newlib_elix_level=2 ;; ++ 3) newlib_elix_level=3 ;; ++ 4) newlib_elix_level=4 ;; ++ *) { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;; ++ esac ++else ++ newlib_elix_level=0 ++fi ++ ++# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given. ++if test "${enable_newlib_io_float+set}" = set; then ++ enableval="$enable_newlib_io_float" ++ case "${enableval}" in ++ yes) newlib_io_float=yes ;; ++ no) newlib_io_float=no ;; ++ *) { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;; ++ esac ++else ++ newlib_io_float=yes ++fi ++ ++# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given. ++if test "${enable_newlib_supplied_syscalls+set}" = set; then ++ enableval="$enable_newlib_supplied_syscalls" ++ case "${enableval}" in ++ yes) newlib_may_supply_syscalls=yes ;; ++ no) newlib_may_supply_syscalls=no ;; ++ *) { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;; ++ esac ++else ++ newlib_may_supply_syscalls=yes ++fi ++ ++ ++ ++if test x${newlib_may_supply_syscalls} = xyes; then ++ MAY_SUPPLY_SYSCALLS_TRUE= ++ MAY_SUPPLY_SYSCALLS_FALSE='#' ++else ++ MAY_SUPPLY_SYSCALLS_TRUE='#' ++ MAY_SUPPLY_SYSCALLS_FALSE= ++fi ++ ++ ++test -z "${with_target_subdir}" && with_target_subdir=. ++ ++if test "${srcdir}" = "."; then ++ if test "${with_target_subdir}" != "."; then ++ newlib_basedir="${srcdir}/${with_multisrctop}../../../.." ++ else ++ newlib_basedir="${srcdir}/${with_multisrctop}../../.." ++ fi ++else ++ newlib_basedir="${srcdir}/../../.." ++fi ++ ++ ++ ++# Do some error checking and defaulting for the host and target type. ++# The inputs are: ++# configure --host=HOST --target=TARGET --build=BUILD NONOPT ++# ++# The rules are: ++# 1. You are not allowed to specify --host, --target, and nonopt at the ++# same time. ++# 2. Host defaults to nonopt. ++# 3. If nonopt is not specified, then host defaults to the current host, ++# as determined by config.guess. ++# 4. Target and build default to nonopt. ++# 5. If nonopt is not specified, then target and build default to host. ++ ++# The aliases save the names the user supplied, while $host etc. ++# will get canonicalized. ++case $host---$target---$nonopt in ++NONE---*---* | *---NONE---* | *---*---NONE) ;; ++*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; ++esac ++ ++ ++# Make sure we can run config.sub. ++if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : ++else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } ++fi ++ ++echo $ac_n "checking host system type""... $ac_c" 1>&6 ++echo "configure:936: checking host system type" >&5 ++ ++host_alias=$host ++case "$host_alias" in ++NONE) ++ case $nonopt in ++ NONE) ++ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : ++ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } ++ fi ;; ++ *) host_alias=$nonopt ;; ++ esac ;; ++esac ++ ++host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` ++host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ++host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ++host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++echo "$ac_t""$host" 1>&6 ++ ++echo $ac_n "checking target system type""... $ac_c" 1>&6 ++echo "configure:957: checking target system type" >&5 ++ ++target_alias=$target ++case "$target_alias" in ++NONE) ++ case $nonopt in ++ NONE) target_alias=$host_alias ;; ++ *) target_alias=$nonopt ;; ++ esac ;; ++esac ++ ++target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` ++target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ++target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ++target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++echo "$ac_t""$target" 1>&6 ++ ++echo $ac_n "checking build system type""... $ac_c" 1>&6 ++echo "configure:975: checking build system type" >&5 ++ ++build_alias=$build ++case "$build_alias" in ++NONE) ++ case $nonopt in ++ NONE) build_alias=$host_alias ;; ++ *) build_alias=$nonopt ;; ++ esac ;; ++esac ++ ++build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` ++build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ++build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ++build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++echo "$ac_t""$build" 1>&6 ++ ++test "$host_alias" != "$target_alias" && ++ test "$program_prefix$program_suffix$program_transform_name" = \ ++ NONENONEs,x,x, && ++ program_prefix=${target_alias}- ++ ++ ++ ++PACKAGE=newlib ++ ++VERSION=1.12.0 ++ ++if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then ++ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } ++fi ++cat >> confdefs.h <<EOF ++#define PACKAGE "$PACKAGE" ++EOF ++ ++cat >> confdefs.h <<EOF ++#define VERSION "$VERSION" ++EOF ++ ++ ++ ++missing_dir=`cd $ac_aux_dir && pwd` ++echo $ac_n "checking for working aclocal-${am__api_version}""... $ac_c" 1>&6 ++echo "configure:1018: checking for working aclocal-${am__api_version}" >&5 ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then ++ ACLOCAL=aclocal-${am__api_version} ++ echo "$ac_t""found" 1>&6 ++else ++ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" ++ echo "$ac_t""missing" 1>&6 ++fi ++ ++echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 ++echo "configure:1031: checking for working autoconf" >&5 ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if (autoconf --version) < /dev/null > /dev/null 2>&1; then ++ AUTOCONF=autoconf ++ echo "$ac_t""found" 1>&6 ++else ++ AUTOCONF="$missing_dir/missing autoconf" ++ echo "$ac_t""missing" 1>&6 ++fi ++ ++echo $ac_n "checking for working automake-${am__api_version}""... $ac_c" 1>&6 ++echo "configure:1044: checking for working automake-${am__api_version}" >&5 ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then ++ AUTOMAKE=automake-${am__api_version} ++ echo "$ac_t""found" 1>&6 ++else ++ AUTOMAKE="$missing_dir/missing automake-${am__api_version}" ++ echo "$ac_t""missing" 1>&6 ++fi ++ ++echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 ++echo "configure:1057: checking for working autoheader" >&5 ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if (autoheader --version) < /dev/null > /dev/null 2>&1; then ++ AUTOHEADER=autoheader ++ echo "$ac_t""found" 1>&6 ++else ++ AUTOHEADER="$missing_dir/missing autoheader" ++ echo "$ac_t""missing" 1>&6 ++fi ++ ++echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 ++echo "configure:1070: checking for working makeinfo" >&5 ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if (makeinfo --version) < /dev/null > /dev/null 2>&1; then ++ MAKEINFO=makeinfo ++ echo "$ac_t""found" 1>&6 ++else ++ MAKEINFO="$missing_dir/missing makeinfo" ++ echo "$ac_t""missing" 1>&6 ++fi ++ ++ ++ ++# FIXME: We temporarily define our own version of AC_PROG_CC. This is ++# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We ++# are probably using a cross compiler, which will not be able to fully ++# link an executable. This should really be fixed in autoconf ++# itself. ++ ++ ++ ++# Extract the first word of "gcc", so it can be a program name with args. ++set dummy gcc; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1095: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ ac_cv_prog_CC="gcc" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++fi ++fi ++CC="$ac_cv_prog_CC" ++if test -n "$CC"; then ++ echo "$ac_t""$CC" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++if test -z "$CC"; then ++ # Extract the first word of "cc", so it can be a program name with args. ++set dummy cc; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1125: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_prog_rejected=no ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ++ ac_prog_rejected=yes ++ continue ++ fi ++ ac_cv_prog_CC="cc" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++if test $ac_prog_rejected = yes; then ++ # We found a bogon in the path, so make sure we never use it. ++ set dummy $ac_cv_prog_CC ++ shift ++ if test $# -gt 0; then ++ # We chose a different compiler from the bogus one. ++ # However, it has the same basename, so the bogon will be chosen ++ # first if we set CC to just the basename; use the full file name. ++ shift ++ set dummy "$ac_dir/$ac_word" "$@" ++ shift ++ ac_cv_prog_CC="$@" ++ fi ++fi ++fi ++fi ++CC="$ac_cv_prog_CC" ++if test -n "$CC"; then ++ echo "$ac_t""$CC" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } ++fi ++ ++echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 ++echo "configure:1174: checking whether we are using GNU C" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ cat > conftest.c <<EOF ++#ifdef __GNUC__ ++ yes; ++#endif ++EOF ++if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1183: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ++ ac_cv_prog_gcc=yes ++else ++ ac_cv_prog_gcc=no ++fi ++fi ++ ++echo "$ac_t""$ac_cv_prog_gcc" 1>&6 ++ ++if test $ac_cv_prog_gcc = yes; then ++ GCC=yes ++ ac_test_CFLAGS="${CFLAGS+set}" ++ ac_save_CFLAGS="$CFLAGS" ++ CFLAGS= ++ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 ++echo "configure:1198: checking whether ${CC-cc} accepts -g" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ echo 'void f(){}' > conftest.c ++if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ++ ac_cv_prog_cc_g=yes ++else ++ ac_cv_prog_cc_g=no ++fi ++rm -f conftest* ++ ++fi ++ ++echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 ++ if test "$ac_test_CFLAGS" = set; then ++ CFLAGS="$ac_save_CFLAGS" ++ elif test $ac_cv_prog_cc_g = yes; then ++ CFLAGS="-g -O2" ++ else ++ CFLAGS="-O2" ++ fi ++else ++ GCC= ++ test "${CFLAGS+set}" = set || CFLAGS="-g" ++fi ++ ++ ++# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. ++set dummy ${ac_tool_prefix}as; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1229: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$AS"; then ++ ac_cv_prog_AS="$AS" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ ac_cv_prog_AS="${ac_tool_prefix}as" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as" ++fi ++fi ++AS="$ac_cv_prog_AS" ++if test -n "$AS"; then ++ echo "$ac_t""$AS" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++ ++ ++# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ar; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1261: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$AR"; then ++ ac_cv_prog_AR="$AR" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ ac_cv_prog_AR="${ac_tool_prefix}ar" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar" ++fi ++fi ++AR="$ac_cv_prog_AR" ++if test -n "$AR"; then ++ echo "$ac_t""$AR" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++ ++ ++# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1293: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++fi ++fi ++RANLIB="$ac_cv_prog_RANLIB" ++if test -n "$RANLIB"; then ++ echo "$ac_t""$RANLIB" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++ ++if test -z "$ac_cv_prog_RANLIB"; then ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1325: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ ac_cv_prog_RANLIB="ranlib" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" ++fi ++fi ++RANLIB="$ac_cv_prog_RANLIB" ++if test -n "$RANLIB"; then ++ echo "$ac_t""$RANLIB" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++else ++ RANLIB=":" ++fi ++fi ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# ./install, which can be erroneously created by make from ./install.sh. ++echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 ++echo "configure:1370: checking for a BSD compatible install" >&5 ++if test -z "$INSTALL"; then ++if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" ++ for ac_dir in $PATH; do ++ # Account for people who put trailing slashes in PATH elements. ++ case "$ac_dir/" in ++ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ if test -f $ac_dir/$ac_prog; then ++ if test $ac_prog = install && ++ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ else ++ ac_cv_path_install="$ac_dir/$ac_prog -c" ++ break 2 ++ fi ++ fi ++ done ++ ;; ++ esac ++ done ++ IFS="$ac_save_IFS" ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL="$ac_cv_path_install" ++ else ++ # As a last resort, use the slow shell script. We don't cache a ++ # path for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the path is relative. ++ INSTALL="$ac_install_sh" ++ fi ++fi ++echo "$ac_t""$INSTALL" 1>&6 ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++ ++echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 ++echo "configure:1424: checking whether to enable maintainer-specific portions of Makefiles" >&5 ++ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. ++if test "${enable_maintainer_mode+set}" = set; then ++ enableval="$enable_maintainer_mode" ++ USE_MAINTAINER_MODE=$enableval ++else ++ USE_MAINTAINER_MODE=no ++fi ++ ++ echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 ++ ++ ++if test $USE_MAINTAINER_MODE = yes; then ++ MAINTAINER_MODE_TRUE= ++ MAINTAINER_MODE_FALSE='#' ++else ++ MAINTAINER_MODE_TRUE='#' ++ MAINTAINER_MODE_FALSE= ++fi ++ MAINT=$MAINTAINER_MODE_TRUE ++ ++ ++ ++# We need AC_EXEEXT to keep automake happy in cygnus mode. However, ++# at least currently, we never actually build a program, so we never ++# need to use $(EXEEXT). Moreover, the test for EXEEXT normally ++# fails, because we are probably configuring with a cross compiler ++# which can't create executables. So we include AC_EXEEXT to keep ++# automake happy, but we don't execute it, since we don't care about ++# the result. ++if false; then ++ ++ ++echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 ++echo "configure:1458: checking for executable suffix" >&5 ++if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then ++ ac_cv_exeext=.exe ++else ++ rm -f conftest* ++ echo 'int main () { return 0; }' > conftest.$ac_ext ++ ac_cv_exeext= ++ if { (eval echo configure:1468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then ++ for file in conftest.*; do ++ case $file in ++ *.c | *.o | *.obj) ;; ++ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; ++ esac ++ done ++ else ++ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } ++ fi ++ rm -f conftest* ++ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no ++fi ++fi ++ ++EXEEXT="" ++test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} ++echo "$ac_t""${ac_cv_exeext}" 1>&6 ++ac_exeext=$EXEEXT ++ ++fi ++ ++. ${newlib_basedir}/configure.host ++ ++newlib_cflags="${newlib_cflags} -fno-builtin" ++ ++NEWLIB_CFLAGS=${newlib_cflags} ++ ++ ++LDFLAGS=${ldflags} ++ ++ ++ ++ ++if test x${newlib_elix_level} = x0; then ++ ELIX_LEVEL_0_TRUE= ++ ELIX_LEVEL_0_FALSE='#' ++else ++ ELIX_LEVEL_0_TRUE='#' ++ ELIX_LEVEL_0_FALSE= ++fi ++ ++ ++if test x${newlib_elix_level} = x1; then ++ ELIX_LEVEL_1_TRUE= ++ ELIX_LEVEL_1_FALSE='#' ++else ++ ELIX_LEVEL_1_TRUE='#' ++ ELIX_LEVEL_1_FALSE= ++fi ++ ++ ++if test x${newlib_elix_level} = x2; then ++ ELIX_LEVEL_2_TRUE= ++ ELIX_LEVEL_2_FALSE='#' ++else ++ ELIX_LEVEL_2_TRUE='#' ++ ELIX_LEVEL_2_FALSE= ++fi ++ ++ ++if test x${newlib_elix_level} = x3; then ++ ELIX_LEVEL_3_TRUE= ++ ELIX_LEVEL_3_FALSE='#' ++else ++ ELIX_LEVEL_3_TRUE='#' ++ ELIX_LEVEL_3_FALSE= ++fi ++ ++ ++if test x${newlib_elix_level} = x4; then ++ ELIX_LEVEL_4_TRUE= ++ ELIX_LEVEL_4_FALSE='#' ++else ++ ELIX_LEVEL_4_TRUE='#' ++ ELIX_LEVEL_4_FALSE= ++fi ++ ++ ++ ++if test x${use_libtool} = xyes; then ++ USE_LIBTOOL_TRUE= ++ USE_LIBTOOL_FALSE='#' ++else ++ USE_LIBTOOL_TRUE='#' ++ USE_LIBTOOL_FALSE= ++fi ++ ++# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we ++# use oext, which is set in configure.host based on the target platform. ++OBJEXT=${oext} ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++trap '' 1 2 15 ++cat > confcache <<\EOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs. It is not useful on other systems. ++# If it contains results you don't want to keep, you may remove or edit it. ++# ++# By default, configure uses ./config.cache as the cache file, ++# creating it if it does not exist already. You can give configure ++# the --cache-file=FILE option to use a different cache file; that is ++# what configure does when it calls configure scripts in ++# subdirectories, so they share the cache. ++# Giving --cache-file=/dev/null disables caching, for debugging configure. ++# config.status only pays attention to the cache file if you give it the ++# --recheck option to rerun configure. ++# ++EOF ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, don't put newlines in cache variables' values. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++(set) 2>&1 | ++ case `(ac_space=' '; set | grep ac_space) 2>&1` in ++ *ac_space=\ *) ++ # `set' does not quote correctly, so add quotes (double-quote substitution ++ # turns \\\\ into \\, and sed turns \\ into \). ++ sed -n \ ++ -e "s/'/'\\\\''/g" \ ++ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ++ ;; ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ++ ;; ++ esac >> confcache ++if cmp -s $cache_file confcache; then ++ : ++else ++ if test -w $cache_file; then ++ echo "updating cache $cache_file" ++ cat confcache > $cache_file ++ else ++ echo "not updating unwritable cache $cache_file" ++ fi ++fi ++rm -f confcache ++ ++trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 ++ ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++ ++# Any assignment to VPATH causes Sun make to only execute ++# the first set of double-colon rules, so remove it if not needed. ++# If there is a colon in the path, we need to keep it. ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' ++fi ++ ++trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 ++ ++# Transform confdefs.h into DEFS. ++# Protect against shell expansion while executing Makefile rules. ++# Protect against Makefile macro expansion. ++cat > conftest.defs <<\EOF ++s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g ++s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g ++s%\[%\\&%g ++s%\]%\\&%g ++s%\$%$$%g ++EOF ++DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` ++rm -f conftest.defs ++ ++ ++# Without the "./", some shells look in PATH for config.status. ++: ${CONFIG_STATUS=./config.status} ++ ++echo creating $CONFIG_STATUS ++rm -f $CONFIG_STATUS ++cat > $CONFIG_STATUS <<EOF ++#! /bin/sh ++# Generated automatically by configure. ++# Run this file to recreate the current configuration. ++# This directory was configured as follows, ++# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# ++# $0 $ac_configure_args ++# ++# Compiler output produced by configure, useful for debugging ++# configure, is in ./config.log if it exists. ++ ++ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" ++for ac_option ++do ++ case "\$ac_option" in ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" ++ exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; ++ -version | --version | --versio | --versi | --vers | --ver | --ve | --v) ++ echo "$CONFIG_STATUS generated by autoconf version 2.13" ++ exit 0 ;; ++ -help | --help | --hel | --he | --h) ++ echo "\$ac_cs_usage"; exit 0 ;; ++ *) echo "\$ac_cs_usage"; exit 1 ;; ++ esac ++done ++ ++ac_given_srcdir=$srcdir ++ac_given_INSTALL="$INSTALL" ++ ++trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 ++EOF ++cat >> $CONFIG_STATUS <<EOF ++ ++# Protect against being on the right side of a sed subst in config.status. ++sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; ++ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF ++$ac_vpsub ++$extrasub ++s%@SHELL@%$SHELL%g ++s%@CFLAGS@%$CFLAGS%g ++s%@CPPFLAGS@%$CPPFLAGS%g ++s%@CXXFLAGS@%$CXXFLAGS%g ++s%@FFLAGS@%$FFLAGS%g ++s%@DEFS@%$DEFS%g ++s%@LDFLAGS@%$LDFLAGS%g ++s%@LIBS@%$LIBS%g ++s%@exec_prefix@%$exec_prefix%g ++s%@prefix@%$prefix%g ++s%@program_transform_name@%$program_transform_name%g ++s%@bindir@%$bindir%g ++s%@sbindir@%$sbindir%g ++s%@libexecdir@%$libexecdir%g ++s%@datadir@%$datadir%g ++s%@sysconfdir@%$sysconfdir%g ++s%@sharedstatedir@%$sharedstatedir%g ++s%@localstatedir@%$localstatedir%g ++s%@libdir@%$libdir%g ++s%@includedir@%$includedir%g ++s%@oldincludedir@%$oldincludedir%g ++s%@infodir@%$infodir%g ++s%@mandir@%$mandir%g ++s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g ++s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g ++s%@newlib_basedir@%$newlib_basedir%g ++s%@host@%$host%g ++s%@host_alias@%$host_alias%g ++s%@host_cpu@%$host_cpu%g ++s%@host_vendor@%$host_vendor%g ++s%@host_os@%$host_os%g ++s%@target@%$target%g ++s%@target_alias@%$target_alias%g ++s%@target_cpu@%$target_cpu%g ++s%@target_vendor@%$target_vendor%g ++s%@target_os@%$target_os%g ++s%@build@%$build%g ++s%@build_alias@%$build_alias%g ++s%@build_cpu@%$build_cpu%g ++s%@build_vendor@%$build_vendor%g ++s%@build_os@%$build_os%g ++s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g ++s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g ++s%@INSTALL_DATA@%$INSTALL_DATA%g ++s%@PACKAGE@%$PACKAGE%g ++s%@VERSION@%$VERSION%g ++s%@ACLOCAL@%$ACLOCAL%g ++s%@AUTOCONF@%$AUTOCONF%g ++s%@AUTOMAKE@%$AUTOMAKE%g ++s%@AUTOHEADER@%$AUTOHEADER%g ++s%@MAKEINFO@%$MAKEINFO%g ++s%@SET_MAKE@%$SET_MAKE%g ++s%@CC@%$CC%g ++s%@AS@%$AS%g ++s%@AR@%$AR%g ++s%@RANLIB@%$RANLIB%g ++s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g ++s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g ++s%@MAINT@%$MAINT%g ++s%@EXEEXT@%$EXEEXT%g ++s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g ++s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g ++s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g ++s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g ++s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g ++s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g ++s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g ++s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g ++s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g ++s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g ++s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g ++s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g ++s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g ++s%@OBJEXT@%$OBJEXT%g ++s%@oext@%$oext%g ++s%@aext@%$aext%g ++s%@libm_machine_dir@%$libm_machine_dir%g ++s%@machine_dir@%$machine_dir%g ++s%@sys_dir@%$sys_dir%g ++ ++CEOF ++EOF ++ ++cat >> $CONFIG_STATUS <<\EOF ++ ++# Split the substitutions into bite-sized pieces for seds with ++# small command number limits, like on Digital OSF/1 and HP-UX. ++ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ++ac_file=1 # Number of current file. ++ac_beg=1 # First line for current file. ++ac_end=$ac_max_sed_cmds # Line after last line for current file. ++ac_more_lines=: ++ac_sed_cmds="" ++while $ac_more_lines; do ++ if test $ac_beg -gt 1; then ++ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file ++ else ++ sed "${ac_end}q" conftest.subs > conftest.s$ac_file ++ fi ++ if test ! -s conftest.s$ac_file; then ++ ac_more_lines=false ++ rm -f conftest.s$ac_file ++ else ++ if test -z "$ac_sed_cmds"; then ++ ac_sed_cmds="sed -f conftest.s$ac_file" ++ else ++ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" ++ fi ++ ac_file=`expr $ac_file + 1` ++ ac_beg=$ac_end ++ ac_end=`expr $ac_end + $ac_max_sed_cmds` ++ fi ++done ++if test -z "$ac_sed_cmds"; then ++ ac_sed_cmds=cat ++fi ++EOF ++ ++cat >> $CONFIG_STATUS <<EOF ++ ++CONFIG_FILES=\${CONFIG_FILES-"Makefile"} ++EOF ++cat >> $CONFIG_STATUS <<\EOF ++for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then ++ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ++ case "$ac_file" in ++ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ++ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; ++ *) ac_file_in="${ac_file}.in" ;; ++ esac ++ ++ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. ++ ++ # Remove last slash and all that follows it. Not all systems have dirname. ++ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` ++ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then ++ # The file is in a subdirectory. ++ test ! -d "$ac_dir" && mkdir "$ac_dir" ++ ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" ++ # A "../" for each directory in $ac_dir_suffix. ++ ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` ++ else ++ ac_dir_suffix= ac_dots= ++ fi ++ ++ case "$ac_given_srcdir" in ++ .) srcdir=. ++ if test -z "$ac_dots"; then top_srcdir=. ++ else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; ++ /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; ++ *) # Relative path. ++ srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" ++ top_srcdir="$ac_dots$ac_given_srcdir" ;; ++ esac ++ ++ case "$ac_given_INSTALL" in ++ [/$]*) INSTALL="$ac_given_INSTALL" ;; ++ *) INSTALL="$ac_dots$ac_given_INSTALL" ;; ++ esac ++ ++ echo creating "$ac_file" ++ rm -f "$ac_file" ++ configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." ++ case "$ac_file" in ++ *Makefile*) ac_comsub="1i\\ ++# $configure_input" ;; ++ *) ac_comsub= ;; ++ esac ++ ++ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` ++ sed -e "$ac_comsub ++s%@configure_input@%$configure_input%g ++s%@srcdir@%$srcdir%g ++s%@top_srcdir@%$top_srcdir%g ++s%@INSTALL@%$INSTALL%g ++" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file ++fi; done ++rm -f conftest.s* ++ ++EOF ++cat >> $CONFIG_STATUS <<EOF ++ ++EOF ++cat >> $CONFIG_STATUS <<\EOF ++ ++exit 0 ++EOF ++chmod +x $CONFIG_STATUS ++rm -fr confdefs* $ac_clean_files ++test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 ++ +diff -urN newlib-1.14.0-orig/newlib/libc/machine/bfin/configure.in newlib-1.14.0/newlib/libc/machine/bfin/configure.in +--- newlib-1.14.0-orig/newlib/libc/machine/bfin/configure.in 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/machine/bfin/configure.in 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,12 @@ ++dnl This is the newlib/libc/machine/arm configure.in file. ++dnl Process this file with autoconf to produce a configure script. ++ ++AC_PREREQ(2.5) ++AC_INIT(Makefile.am) ++ ++dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. ++AC_CONFIG_AUX_DIR(../../../..) ++ ++NEWLIB_CONFIGURE(../../..) ++ ++AC_OUTPUT(Makefile) +diff -urN newlib-1.14.0-orig/newlib/libc/machine/bfin/machine/endian.h newlib-1.14.0/newlib/libc/machine/bfin/machine/endian.h +--- newlib-1.14.0-orig/newlib/libc/machine/bfin/machine/endian.h 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/machine/bfin/machine/endian.h 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,6 @@ ++#ifndef _MACHINE_ENDIAN_H ++# define _MACHINE_ENDIAN_H ++ ++#define BYTE_ORDER LITTLE_ENDIAN ++ ++#endif +diff -urN newlib-1.14.0-orig/newlib/libc/machine/bfin/machine/param.h newlib-1.14.0/newlib/libc/machine/bfin/machine/param.h +--- newlib-1.14.0-orig/newlib/libc/machine/bfin/machine/param.h 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/machine/bfin/machine/param.h 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,8 @@ ++#ifndef _MACHINE_PARAM_H ++# define _MACHINE_PARAM_H ++ ++# define HZ (100) ++ ++#define BYTE_ORDER LITTLE_ENDIAN ++ ++#endif +diff -urN newlib-1.14.0-orig/newlib/libc/machine/bfin/Makefile.am newlib-1.14.0/newlib/libc/machine/bfin/Makefile.am +--- newlib-1.14.0-orig/newlib/libc/machine/bfin/Makefile.am 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/machine/bfin/Makefile.am 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,12 @@ ++## Process this file with automake to generate Makefile.in ++ ++AUTOMAKE_OPTIONS = cygnus ++ ++INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) ++ ++noinst_LIBRARIES = lib.a ++ ++lib_a_SOURCES = access.c ++ ++ACLOCAL_AMFLAGS = -I ../../.. ++CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host +diff -urN newlib-1.14.0-orig/newlib/libc/machine/bfin/Makefile.in newlib-1.14.0/newlib/libc/machine/bfin/Makefile.in +--- newlib-1.14.0-orig/newlib/libc/machine/bfin/Makefile.in 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/machine/bfin/Makefile.in 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,327 @@ ++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ++ ++# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++# This Makefile.in is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without ++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A ++# PARTICULAR PURPOSE. ++ ++ ++SHELL = @SHELL@ ++ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ ++VPATH = @srcdir@ ++prefix = @prefix@ ++exec_prefix = @exec_prefix@ ++ ++bindir = @bindir@ ++sbindir = @sbindir@ ++libexecdir = @libexecdir@ ++datadir = @datadir@ ++sysconfdir = @sysconfdir@ ++sharedstatedir = @sharedstatedir@ ++localstatedir = @localstatedir@ ++libdir = @libdir@ ++infodir = @infodir@ ++mandir = @mandir@ ++includedir = @includedir@ ++oldincludedir = /usr/include ++ ++DESTDIR = ++ ++pkgdatadir = $(datadir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkgincludedir = $(includedir)/@PACKAGE@ ++ ++top_builddir = . ++ ++ACLOCAL = @ACLOCAL@ ++AUTOCONF = @AUTOCONF@ ++AUTOMAKE = @AUTOMAKE@ ++AUTOHEADER = @AUTOHEADER@ ++ ++INSTALL = @INSTALL@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++transform = @program_transform_name@ ++ ++NORMAL_INSTALL = : ++PRE_INSTALL = : ++POST_INSTALL = : ++NORMAL_UNINSTALL = : ++PRE_UNINSTALL = : ++POST_UNINSTALL = : ++build_alias = @build_alias@ ++build_triplet = @build@ ++host_alias = @host_alias@ ++host_triplet = @host@ ++target_alias = @target_alias@ ++target_triplet = @target@ ++AR = @AR@ ++AS = @AS@ ++CC = @CC@ ++CPP = @CPP@ ++EXEEXT = @EXEEXT@ ++LDFLAGS = @LDFLAGS@ ++MAINT = @MAINT@ ++MAKEINFO = @MAKEINFO@ ++NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ ++OBJEXT = @OBJEXT@ ++PACKAGE = @PACKAGE@ ++RANLIB = @RANLIB@ ++VERSION = @VERSION@ ++aext = @aext@ ++libm_machine_dir = @libm_machine_dir@ ++machine_dir = @machine_dir@ ++newlib_basedir = @newlib_basedir@ ++oext = @oext@ ++sys_dir = @sys_dir@ ++ ++AUTOMAKE_OPTIONS = cygnus ++ ++INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) ++ ++noinst_LIBRARIES = lib.a ++ ++lib_a_SOURCES = setjmp.S access.c ++ ++ACLOCAL_AMFLAGS = -I ../../.. ++CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs ++CONFIG_CLEAN_FILES = ++LIBRARIES = $(noinst_LIBRARIES) ++ ++ ++DEFS = @DEFS@ -I. -I$(srcdir) ++CPPFLAGS = @CPPFLAGS@ ++LIBS = @LIBS@ ++lib_a_LIBADD = ++lib_a_OBJECTS = setjmp.o access.o ++CFLAGS = @CFLAGS@ ++COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++CCLD = $(CC) ++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ ++DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in ++ ++ ++DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) ++ ++TAR = gtar ++GZIP_ENV = --best ++SOURCES = $(lib_a_SOURCES) ++OBJECTS = $(lib_a_OBJECTS) ++ ++all: all-redirect ++.SUFFIXES: ++.SUFFIXES: .S .c .o .s ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ++ cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile ++ ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ cd $(top_builddir) \ ++ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status ++ ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \ ++ ../../../acinclude.m4 ../../../aclocal.m4 \ ++ ../../../libtool.m4 ++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) ++ ++config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ $(SHELL) ./config.status --recheck ++$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) ++ cd $(srcdir) && $(AUTOCONF) ++ ++mostlyclean-noinstLIBRARIES: ++ ++clean-noinstLIBRARIES: ++ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) ++ ++distclean-noinstLIBRARIES: ++ ++maintainer-clean-noinstLIBRARIES: ++ ++.c.o: ++ $(COMPILE) -c $< ++ ++.s.o: ++ $(COMPILE) -c $< ++ ++.S.o: ++ $(COMPILE) -c $< ++ ++mostlyclean-compile: ++ -rm -f *.o core *.core ++ ++clean-compile: ++ ++distclean-compile: ++ -rm -f *.tab.c ++ ++maintainer-clean-compile: ++ ++lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) ++ -rm -f lib.a ++ $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) ++ $(RANLIB) lib.a ++ ++tags: TAGS ++ ++ID: $(HEADERS) $(SOURCES) $(LISP) ++ list='$(SOURCES) $(HEADERS)'; \ ++ unique=`for i in $$list; do echo $$i; done | \ ++ awk ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ here=`pwd` && cd $(srcdir) \ ++ && mkid -f$$here/ID $$unique $(LISP) ++ ++TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ list='$(SOURCES) $(HEADERS)'; \ ++ unique=`for i in $$list; do echo $$i; done | \ ++ awk ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ ++ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) ++ ++mostlyclean-tags: ++ ++clean-tags: ++ ++distclean-tags: ++ -rm -f TAGS ID ++ ++maintainer-clean-tags: ++ ++distdir = $(PACKAGE)-$(VERSION) ++top_distdir = $(distdir) ++ ++# This target untars the dist file and tries a VPATH configuration. Then ++# it guarantees that the distribution is self-contained by making another ++# tarfile. ++distcheck: dist ++ -rm -rf $(distdir) ++ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz ++ mkdir $(distdir)/=build ++ mkdir $(distdir)/=inst ++ dc_install_base=`cd $(distdir)/=inst && pwd`; \ ++ cd $(distdir)/=build \ ++ && ../configure --srcdir=.. --prefix=$$dc_install_base \ ++ && $(MAKE) $(AM_MAKEFLAGS) \ ++ && $(MAKE) $(AM_MAKEFLAGS) dvi \ ++ && $(MAKE) $(AM_MAKEFLAGS) check \ ++ && $(MAKE) $(AM_MAKEFLAGS) install \ ++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ ++ && $(MAKE) $(AM_MAKEFLAGS) dist ++ -rm -rf $(distdir) ++ @banner="$(distdir).tar.gz is ready for distribution"; \ ++ dashes=`echo "$$banner" | sed s/./=/g`; \ ++ echo "$$dashes"; \ ++ echo "$$banner"; \ ++ echo "$$dashes" ++dist: distdir ++ -chmod -R a+r $(distdir) ++ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) ++ -rm -rf $(distdir) ++dist-all: distdir ++ -chmod -R a+r $(distdir) ++ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) ++ -rm -rf $(distdir) ++distdir: $(DISTFILES) ++ -rm -rf $(distdir) ++ mkdir $(distdir) ++ -chmod 777 $(distdir) ++ @for file in $(DISTFILES); do \ ++ if test -f $$file; then d=.; else d=$(srcdir); fi; \ ++ if test -d $$d/$$file; then \ ++ cp -pr $$d/$$file $(distdir)/$$file; \ ++ else \ ++ test -f $(distdir)/$$file \ ++ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ ++ || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ fi; \ ++ done ++info-am: ++info: info-am ++dvi-am: ++dvi: dvi-am ++check-am: ++check: check-am ++installcheck-am: ++installcheck: installcheck-am ++install-info-am: ++install-info: install-info-am ++install-exec-am: ++install-exec: install-exec-am ++ ++install-data-am: ++install-data: install-data-am ++ ++install-am: all-am ++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am ++install: install-am ++uninstall-am: ++uninstall: uninstall-am ++all-am: Makefile $(LIBRARIES) ++all-redirect: all-am ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install ++installdirs: ++ ++ ++mostlyclean-generic: ++ ++clean-generic: ++ ++distclean-generic: ++ -rm -f Makefile $(CONFIG_CLEAN_FILES) ++ -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ ++maintainer-clean-generic: ++mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ ++ mostlyclean-tags mostlyclean-generic ++ ++mostlyclean: mostlyclean-am ++ ++clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ ++ mostlyclean-am ++ ++clean: clean-am ++ ++distclean-am: distclean-noinstLIBRARIES distclean-compile \ ++ distclean-tags distclean-generic clean-am ++ ++distclean: distclean-am ++ -rm -f config.status ++ ++maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ ++ maintainer-clean-compile maintainer-clean-tags \ ++ maintainer-clean-generic distclean-am ++ @echo "This command is intended for maintainers to use;" ++ @echo "it deletes files that may require special tools to rebuild." ++ ++maintainer-clean: maintainer-clean-am ++ -rm -f config.status ++ ++.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ ++clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ ++mostlyclean-compile distclean-compile clean-compile \ ++maintainer-clean-compile tags mostlyclean-tags distclean-tags \ ++clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ ++check-am installcheck-am installcheck install-info-am install-info \ ++install-exec-am install-exec install-data-am install-data install-am \ ++install uninstall-am uninstall all-redirect all-am all installdirs \ ++mostlyclean-generic distclean-generic clean-generic \ ++maintainer-clean-generic clean mostlyclean distclean maintainer-clean ++ ++ ++# Tell versions [3.59,3.63) of GNU make to not export all variables. ++# Otherwise a system limit (for SysV at least) may be exceeded. ++.NOEXPORT: +diff -urN newlib-1.14.0-orig/newlib/libc/machine/bfin/setjmp.S newlib-1.14.0/newlib/libc/machine/bfin/setjmp.S +--- newlib-1.14.0-orig/newlib/libc/machine/bfin/setjmp.S 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/machine/bfin/setjmp.S 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,104 @@ ++ ++/* Cetjmp for the Blackfin project ++ * ++ * Copyright (C) 2003, Metrowerks ++ * Based on code from Analog Devices. ++ * ++ * This file is subject to the terms and conditions of the GNU Lesser ++ * General Public License. See the file COPYING.LIB in the main ++ * directory of this archive for more details. ++ * ++ */ ++#define _ASM ++#define _SETJMP_H ++ ++.globl ___sigsetjmp; ++.align 4; ++ ++___sigsetjmp: ++ [--SP] = P0; /* Save P0 */ ++ P0 = R0; ++ R0 = [SP++]; ++ [P0 + 0x00] = R0; /* Save saved P0 */ ++ [P0 + 0x04] = P1; ++ [P0 + 0x08] = P2; ++ [P0 + 0x0C] = P3; ++ [P0 + 0x10] = P4; ++ [P0 + 0x14] = P5; ++ ++ [P0 + 0x18] = FP; /* Frame Pointer */ ++ [P0 + 0x1C] = SP; /* Stack Pointer */ ++ ++ [P0 + 0x20] = P0; /* Data Registers */ ++ [P0 + 0x24] = R1; ++ [P0 + 0x28] = R2; ++ [P0 + 0x2C] = R3; ++ [P0 + 0x30] = R4; ++ [P0 + 0x34] = R5; ++ [P0 + 0x38] = R6; ++ [P0 + 0x3C] = R7; ++ ++ R0 = ASTAT; ++ [P0 + 0x40] = R0; ++ ++ R0 = LC0; /* Loop Counters */ ++ [P0 + 0x44] = R0; ++ R0 = LC1; ++ [P0 + 0x48] = R0; ++ ++ R0 = A0.W; /* Accumulators */ ++ [P0 + 0x4C] = R0; ++ R0 = A0.X; ++ [P0 + 0x50] = R0; ++ R0 = A1.W; ++ [P0 + 0x54] = R0; ++ R0 = A1.X; ++ [P0 + 0x58] = R0; ++ ++ R0 = I0; /* Index Registers */ ++ [P0 + 0x5C] = R0; ++ R0 = I1; ++ [P0 + 0x60] = R0; ++ R0 = I2; ++ [P0 + 0x64] = R0; ++ R0 = I3; ++ [P0 + 0x68] = R0; ++ ++ R0 = M0; /* Modifier Registers */ ++ [P0 + 0x6C] = R0; ++ R0 = M1; ++ [P0 + 0x70] = R0; ++ R0 = M2; ++ [P0 + 0x74] = R0; ++ R0 = M3; ++ [P0 + 0x78] = R0; ++ ++ R0 = L0; /* Length Registers */ ++ [P0 + 0x7c] = R0; ++ R0 = L1; ++ [P0 + 0x80] = R0; ++ R0 = L2; ++ [P0 + 0x84] = R0; ++ R0 = L3; ++ [P0 + 0x88] = R0; ++ ++ R0 = B0; /* Base Registers */ ++ [P0 + 0x8C] = R0; ++ R0 = B1; ++ [P0 + 0x90] = R0; ++ R0 = B2; ++ [P0 + 0x94] = R0; ++ R0 = B3; ++ [P0 + 0x98] = R0; ++ ++ R0 = RETS; ++ [P0 + 0x9C] = R0; ++ ++ R0 = [P0 + 0x20]; ++ CC = R1 == 1; ++ IF CC JUMP finished; ++ CALL ___sigjmp_save; ++finished: ++ R0 = 0; ++ RTS; ++___sigsetjmp.end: +diff -urN newlib-1.14.0-orig/newlib/libc/sys/bfin/aclocal.m4 newlib-1.14.0/newlib/libc/sys/bfin/aclocal.m4 +--- newlib-1.14.0-orig/newlib/libc/sys/bfin/aclocal.m4 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/sys/bfin/aclocal.m4 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,366 @@ ++dnl aclocal.m4 generated automatically by aclocal 1.4-p6 ++ ++dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++ ++dnl This program is distributed in the hope that it will be useful, ++dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without ++dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A ++dnl PARTICULAR PURPOSE. ++ ++dnl This provides configure definitions used by all the newlib ++dnl configure.in files. ++ ++dnl Basic newlib configury. This calls basic introductory stuff, ++dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs ++dnl configure.host. The only argument is the relative path to the top ++dnl newlib directory. ++ ++AC_DEFUN(NEWLIB_CONFIGURE, ++[ ++dnl Default to --enable-multilib ++AC_ARG_ENABLE(multilib, ++[ --enable-multilib build many library versions (default)], ++[case "${enableval}" in ++ yes) multilib=yes ;; ++ no) multilib=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; ++ esac], [multilib=yes])dnl ++ ++dnl Support --enable-target-optspace ++AC_ARG_ENABLE(target-optspace, ++[ --enable-target-optspace optimize for space], ++[case "${enableval}" in ++ yes) target_optspace=yes ;; ++ no) target_optspace=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; ++ esac], [target_optspace=])dnl ++ ++dnl Support --enable-malloc-debugging - currently only supported for Cygwin ++AC_ARG_ENABLE(malloc-debugging, ++[ --enable-malloc-debugging indicate malloc debugging requested], ++[case "${enableval}" in ++ yes) malloc_debugging=yes ;; ++ no) malloc_debugging=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; ++ esac], [malloc_debugging=])dnl ++ ++dnl Support --enable-newlib-multithread ++AC_ARG_ENABLE(newlib-multithread, ++[ --enable-newlib-multithread enable support for multiple threads], ++[case "${enableval}" in ++ yes) newlib_multithread=yes ;; ++ no) newlib_multithread=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;; ++ esac], [newlib_multithread=yes])dnl ++ ++dnl Support --enable-newlib-iconv ++AC_ARG_ENABLE(newlib-iconv, ++[ --enable-newlib-iconv enable iconv library support], ++[if test "${newlib_iconv+set}" != set; then ++ case "${enableval}" in ++ yes) newlib_iconv=yes ;; ++ no) newlib_iconv=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;; ++ esac ++ fi], [newlib_iconv=${newlib_iconv}])dnl ++ ++dnl Support --enable-newlib-elix-level ++AC_ARG_ENABLE(newlib-elix-level, ++[ --enable-newlib-elix-level supply desired elix library level (1-4)], ++[case "${enableval}" in ++ 0) newlib_elix_level=0 ;; ++ 1) newlib_elix_level=1 ;; ++ 2) newlib_elix_level=2 ;; ++ 3) newlib_elix_level=3 ;; ++ 4) newlib_elix_level=4 ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;; ++ esac], [newlib_elix_level=0])dnl ++ ++dnl Support --disable-newlib-io-float ++AC_ARG_ENABLE(newlib-io-float, ++[ --disable-newlib-io-float disable printf/scanf family float support], ++[case "${enableval}" in ++ yes) newlib_io_float=yes ;; ++ no) newlib_io_float=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;; ++ esac], [newlib_io_float=yes])dnl ++ ++dnl Support --disable-newlib-supplied-syscalls ++AC_ARG_ENABLE(newlib-supplied-syscalls, ++[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls], ++[case "${enableval}" in ++ yes) newlib_may_supply_syscalls=yes ;; ++ no) newlib_may_supply_syscalls=no ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;; ++ esac], [newlib_may_supply_syscalls=yes])dnl ++ ++AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes) ++ ++dnl We may get other options which we don't document: ++dnl --with-target-subdir, --with-multisrctop, --with-multisubdir ++ ++test -z "[$]{with_target_subdir}" && with_target_subdir=. ++ ++if test "[$]{srcdir}" = "."; then ++ if test "[$]{with_target_subdir}" != "."; then ++ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" ++ else ++ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" ++ fi ++else ++ newlib_basedir="[$]{srcdir}/$1" ++fi ++AC_SUBST(newlib_basedir) ++ ++AC_CANONICAL_SYSTEM ++ ++AM_INIT_AUTOMAKE(newlib, 1.12.0) ++ ++# FIXME: We temporarily define our own version of AC_PROG_CC. This is ++# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We ++# are probably using a cross compiler, which will not be able to fully ++# link an executable. This should really be fixed in autoconf ++# itself. ++ ++AC_DEFUN(LIB_AC_PROG_CC, ++[AC_BEFORE([$0], [AC_PROG_CPP])dnl ++AC_CHECK_PROG(CC, gcc, gcc) ++if test -z "$CC"; then ++ AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) ++ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) ++fi ++ ++AC_PROG_CC_GNU ++ ++if test $ac_cv_prog_gcc = yes; then ++ GCC=yes ++dnl Check whether -g works, even if CFLAGS is set, in case the package ++dnl plays around with CFLAGS (such as to build both debugging and ++dnl normal versions of a library), tasteless as that idea is. ++ ac_test_CFLAGS="${CFLAGS+set}" ++ ac_save_CFLAGS="$CFLAGS" ++ CFLAGS= ++ AC_PROG_CC_G ++ if test "$ac_test_CFLAGS" = set; then ++ CFLAGS="$ac_save_CFLAGS" ++ elif test $ac_cv_prog_cc_g = yes; then ++ CFLAGS="-g -O2" ++ else ++ CFLAGS="-O2" ++ fi ++else ++ GCC= ++ test "${CFLAGS+set}" = set || CFLAGS="-g" ++fi ++]) ++ ++LIB_AC_PROG_CC ++ ++AC_CHECK_TOOL(AS, as) ++AC_CHECK_TOOL(AR, ar) ++AC_CHECK_TOOL(RANLIB, ranlib, :) ++ ++AC_PROG_INSTALL ++ ++AM_MAINTAINER_MODE ++ ++# We need AC_EXEEXT to keep automake happy in cygnus mode. However, ++# at least currently, we never actually build a program, so we never ++# need to use $(EXEEXT). Moreover, the test for EXEEXT normally ++# fails, because we are probably configuring with a cross compiler ++# which can't create executables. So we include AC_EXEEXT to keep ++# automake happy, but we don't execute it, since we don't care about ++# the result. ++if false; then ++ AC_EXEEXT ++fi ++ ++. [$]{newlib_basedir}/configure.host ++ ++newlib_cflags="[$]{newlib_cflags} -fno-builtin" ++ ++NEWLIB_CFLAGS=${newlib_cflags} ++AC_SUBST(NEWLIB_CFLAGS) ++ ++LDFLAGS=${ldflags} ++AC_SUBST(LDFLAGS) ++ ++AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0) ++AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1) ++AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2) ++AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3) ++AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4) ++ ++AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes) ++ ++# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we ++# use oext, which is set in configure.host based on the target platform. ++OBJEXT=${oext} ++ ++AC_SUBST(OBJEXT) ++AC_SUBST(oext) ++AC_SUBST(aext) ++ ++AC_SUBST(libm_machine_dir) ++AC_SUBST(machine_dir) ++AC_SUBST(sys_dir) ++]) ++ ++# Do all the work for Automake. This macro actually does too much -- ++# some checks are only needed if your package does certain things. ++# But this isn't really a big deal. ++ ++# serial 1 ++ ++dnl Usage: ++dnl AM_INIT_AUTOMAKE(package,version, [no-define]) ++ ++AC_DEFUN([AM_INIT_AUTOMAKE], ++[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL]) ++PACKAGE=[$1] ++AC_SUBST(PACKAGE) ++VERSION=[$2] ++AC_SUBST(VERSION) ++dnl test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++fi ++ifelse([$3],, ++AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) ++AC_REQUIRE([AM_SANITY_CHECK]) ++AC_REQUIRE([AC_ARG_PROGRAM]) ++dnl FIXME This is truly gross. ++missing_dir=`cd $ac_aux_dir && pwd` ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) ++AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) ++AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) ++AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) ++AC_REQUIRE([AC_PROG_MAKE_SET])]) ++ ++# Copyright 2002 Free Software Foundation, Inc. ++ ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2, or (at your option) ++# any later version. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++ ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ++ ++# AM_AUTOMAKE_VERSION(VERSION) ++# ---------------------------- ++# Automake X.Y traces this macro to ensure aclocal.m4 has been ++# generated from the m4 files accompanying Automake X.Y. ++AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) ++ ++# AM_SET_CURRENT_AUTOMAKE_VERSION ++# ------------------------------- ++# Call AM_AUTOMAKE_VERSION so it can be traced. ++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ++ [AM_AUTOMAKE_VERSION([1.4-p6])]) ++ ++# ++# Check to make sure that the build environment is sane. ++# ++ ++AC_DEFUN([AM_SANITY_CHECK], ++[AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftestfile ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` ++ if test "[$]*" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftestfile` ++ fi ++ if test "[$]*" != "X $srcdir/configure conftestfile" \ ++ && test "[$]*" != "X conftestfile $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi ++ ++ test "[$]2" = conftestfile ++ ) ++then ++ # Ok. ++ : ++else ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) ++fi ++rm -f conftest* ++AC_MSG_RESULT(yes)]) ++ ++dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) ++dnl The program must properly implement --version. ++AC_DEFUN([AM_MISSING_PROG], ++[AC_MSG_CHECKING(for working $2) ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if ($2 --version) < /dev/null > /dev/null 2>&1; then ++ $1=$2 ++ AC_MSG_RESULT(found) ++else ++ $1="$3/missing $2" ++ AC_MSG_RESULT(missing) ++fi ++AC_SUBST($1)]) ++ ++# Define a conditional. ++ ++AC_DEFUN([AM_CONDITIONAL], ++[AC_SUBST($1_TRUE) ++AC_SUBST($1_FALSE) ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' ++else ++ $1_TRUE='#' ++ $1_FALSE= ++fi]) ++ ++# Add --enable-maintainer-mode option to configure. ++# From Jim Meyering ++ ++# serial 1 ++ ++AC_DEFUN([AM_MAINTAINER_MODE], ++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) ++ dnl maintainer-mode is disabled by default ++ AC_ARG_ENABLE(maintainer-mode, ++[ --enable-maintainer-mode enable make rules and dependencies not useful ++ (and sometimes confusing) to the casual installer], ++ USE_MAINTAINER_MODE=$enableval, ++ USE_MAINTAINER_MODE=no) ++ AC_MSG_RESULT($USE_MAINTAINER_MODE) ++ AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) ++ MAINT=$MAINTAINER_MODE_TRUE ++ AC_SUBST(MAINT)dnl ++] ++) ++ +diff -urN newlib-1.14.0-orig/newlib/libc/sys/bfin/configure newlib-1.14.0/newlib/libc/sys/bfin/configure +--- newlib-1.14.0-orig/newlib/libc/sys/bfin/configure 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/sys/bfin/configure 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,1880 @@ ++#! /bin/sh ++ ++# Guess values for system-dependent variables and create Makefiles. ++# Generated automatically using autoconf version 2.13 ++# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. ++# ++# This configure script is free software; the Free Software Foundation ++# gives unlimited permission to copy, distribute and modify it. ++ ++# Defaults: ++ac_help= ++ac_default_prefix=/usr/local ++# Any additions from configure.in: ++ac_help="$ac_help ++ --enable-multilib build many library versions (default)" ++ac_help="$ac_help ++ --enable-target-optspace optimize for space" ++ac_help="$ac_help ++ --enable-malloc-debugging indicate malloc debugging requested" ++ac_help="$ac_help ++ --enable-newlib-multithread enable support for multiple threads" ++ac_help="$ac_help ++ --enable-newlib-iconv enable iconv library support" ++ac_help="$ac_help ++ --enable-newlib-elix-level supply desired elix library level (1-4)" ++ac_help="$ac_help ++ --disable-newlib-io-float disable printf/scanf family float support" ++ac_help="$ac_help ++ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls" ++ac_help="$ac_help ++ --enable-maintainer-mode enable make rules and dependencies not useful ++ (and sometimes confusing) to the casual installer" ++ ++# Initialize some variables set by options. ++# The variables have the same names as the options, with ++# dashes changed to underlines. ++build=NONE ++cache_file=./config.cache ++exec_prefix=NONE ++host=NONE ++no_create= ++nonopt=NONE ++no_recursion= ++prefix=NONE ++program_prefix=NONE ++program_suffix=NONE ++program_transform_name=s,x,x, ++silent= ++site= ++srcdir= ++target=NONE ++verbose= ++x_includes=NONE ++x_libraries=NONE ++bindir='${exec_prefix}/bin' ++sbindir='${exec_prefix}/sbin' ++libexecdir='${exec_prefix}/libexec' ++datadir='${prefix}/share' ++sysconfdir='${prefix}/etc' ++sharedstatedir='${prefix}/com' ++localstatedir='${prefix}/var' ++libdir='${exec_prefix}/lib' ++includedir='${prefix}/include' ++oldincludedir='/usr/include' ++infodir='${prefix}/info' ++mandir='${prefix}/man' ++ ++# Initialize some other variables. ++subdirs= ++MFLAGS= MAKEFLAGS= ++SHELL=${CONFIG_SHELL-/bin/sh} ++# Maximum number of lines to put in a shell here document. ++ac_max_here_lines=12 ++ ++ac_prev= ++for ac_option ++do ++ ++ # If the previous option needs an argument, assign it. ++ if test -n "$ac_prev"; then ++ eval "$ac_prev=\$ac_option" ++ ac_prev= ++ continue ++ fi ++ ++ case "$ac_option" in ++ -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; ++ *) ac_optarg= ;; ++ esac ++ ++ # Accept the important Cygnus configure options, so we can diagnose typos. ++ ++ case "$ac_option" in ++ ++ -bindir | --bindir | --bindi | --bind | --bin | --bi) ++ ac_prev=bindir ;; ++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) ++ bindir="$ac_optarg" ;; ++ ++ -build | --build | --buil | --bui | --bu) ++ ac_prev=build ;; ++ -build=* | --build=* | --buil=* | --bui=* | --bu=*) ++ build="$ac_optarg" ;; ++ ++ -cache-file | --cache-file | --cache-fil | --cache-fi \ ++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ++ ac_prev=cache_file ;; ++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ ++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) ++ cache_file="$ac_optarg" ;; ++ ++ -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ ac_prev=datadir ;; ++ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ ++ | --da=*) ++ datadir="$ac_optarg" ;; ++ ++ -disable-* | --disable-*) ++ ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` ++ # Reject names that are not valid shell variable names. ++ if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then ++ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } ++ fi ++ ac_feature=`echo $ac_feature| sed 's/-/_/g'` ++ eval "enable_${ac_feature}=no" ;; ++ ++ -enable-* | --enable-*) ++ ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` ++ # Reject names that are not valid shell variable names. ++ if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then ++ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } ++ fi ++ ac_feature=`echo $ac_feature| sed 's/-/_/g'` ++ case "$ac_option" in ++ *=*) ;; ++ *) ac_optarg=yes ;; ++ esac ++ eval "enable_${ac_feature}='$ac_optarg'" ;; ++ ++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ ++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ ++ | --exec | --exe | --ex) ++ ac_prev=exec_prefix ;; ++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ ++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ ++ | --exec=* | --exe=* | --ex=*) ++ exec_prefix="$ac_optarg" ;; ++ ++ -gas | --gas | --ga | --g) ++ # Obsolete; use --with-gas. ++ with_gas=yes ;; ++ ++ -help | --help | --hel | --he) ++ # Omit some internal or obsolete options to make the list less imposing. ++ # This message is too long to be a string in the A/UX 3.1 sh. ++ cat << EOF ++Usage: configure [options] [host] ++Options: [defaults in brackets after descriptions] ++Configuration: ++ --cache-file=FILE cache test results in FILE ++ --help print this message ++ --no-create do not create output files ++ --quiet, --silent do not print \`checking...' messages ++ --version print the version of autoconf that created configure ++Directory and file names: ++ --prefix=PREFIX install architecture-independent files in PREFIX ++ [$ac_default_prefix] ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ++ [same as prefix] ++ --bindir=DIR user executables in DIR [EPREFIX/bin] ++ --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] ++ --libexecdir=DIR program executables in DIR [EPREFIX/libexec] ++ --datadir=DIR read-only architecture-independent data in DIR ++ [PREFIX/share] ++ --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data in DIR ++ [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] ++ --libdir=DIR object code libraries in DIR [EPREFIX/lib] ++ --includedir=DIR C header files in DIR [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] ++ --infodir=DIR info documentation in DIR [PREFIX/info] ++ --mandir=DIR man documentation in DIR [PREFIX/man] ++ --srcdir=DIR find the sources in DIR [configure dir or ..] ++ --program-prefix=PREFIX prepend PREFIX to installed program names ++ --program-suffix=SUFFIX append SUFFIX to installed program names ++ --program-transform-name=PROGRAM ++ run sed PROGRAM on installed program names ++EOF ++ cat << EOF ++Host type: ++ --build=BUILD configure for building on BUILD [BUILD=HOST] ++ --host=HOST configure for HOST [guessed] ++ --target=TARGET configure for TARGET [TARGET=HOST] ++Features and packages: ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] ++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) ++ --x-includes=DIR X include files are in DIR ++ --x-libraries=DIR X library files are in DIR ++EOF ++ if test -n "$ac_help"; then ++ echo "--enable and --with options recognized:$ac_help" ++ fi ++ exit 0 ;; ++ ++ -host | --host | --hos | --ho) ++ ac_prev=host ;; ++ -host=* | --host=* | --hos=* | --ho=*) ++ host="$ac_optarg" ;; ++ ++ -includedir | --includedir | --includedi | --included | --include \ ++ | --includ | --inclu | --incl | --inc) ++ ac_prev=includedir ;; ++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ ++ | --includ=* | --inclu=* | --incl=* | --inc=*) ++ includedir="$ac_optarg" ;; ++ ++ -infodir | --infodir | --infodi | --infod | --info | --inf) ++ ac_prev=infodir ;; ++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) ++ infodir="$ac_optarg" ;; ++ ++ -libdir | --libdir | --libdi | --libd) ++ ac_prev=libdir ;; ++ -libdir=* | --libdir=* | --libdi=* | --libd=*) ++ libdir="$ac_optarg" ;; ++ ++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ ++ | --libexe | --libex | --libe) ++ ac_prev=libexecdir ;; ++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ ++ | --libexe=* | --libex=* | --libe=*) ++ libexecdir="$ac_optarg" ;; ++ ++ -localstatedir | --localstatedir | --localstatedi | --localstated \ ++ | --localstate | --localstat | --localsta | --localst \ ++ | --locals | --local | --loca | --loc | --lo) ++ ac_prev=localstatedir ;; ++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ ++ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ++ localstatedir="$ac_optarg" ;; ++ ++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ++ ac_prev=mandir ;; ++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) ++ mandir="$ac_optarg" ;; ++ ++ -nfp | --nfp | --nf) ++ # Obsolete; use --without-fp. ++ with_fp=no ;; ++ ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ++ | --no-cr | --no-c) ++ no_create=yes ;; ++ ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ++ no_recursion=yes ;; ++ ++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ ++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ ++ | --oldin | --oldi | --old | --ol | --o) ++ ac_prev=oldincludedir ;; ++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ ++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ ++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) ++ oldincludedir="$ac_optarg" ;; ++ ++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ++ ac_prev=prefix ;; ++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ++ prefix="$ac_optarg" ;; ++ ++ -program-prefix | --program-prefix | --program-prefi | --program-pref \ ++ | --program-pre | --program-pr | --program-p) ++ ac_prev=program_prefix ;; ++ -program-prefix=* | --program-prefix=* | --program-prefi=* \ ++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) ++ program_prefix="$ac_optarg" ;; ++ ++ -program-suffix | --program-suffix | --program-suffi | --program-suff \ ++ | --program-suf | --program-su | --program-s) ++ ac_prev=program_suffix ;; ++ -program-suffix=* | --program-suffix=* | --program-suffi=* \ ++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) ++ program_suffix="$ac_optarg" ;; ++ ++ -program-transform-name | --program-transform-name \ ++ | --program-transform-nam | --program-transform-na \ ++ | --program-transform-n | --program-transform- \ ++ | --program-transform | --program-transfor \ ++ | --program-transfo | --program-transf \ ++ | --program-trans | --program-tran \ ++ | --progr-tra | --program-tr | --program-t) ++ ac_prev=program_transform_name ;; ++ -program-transform-name=* | --program-transform-name=* \ ++ | --program-transform-nam=* | --program-transform-na=* \ ++ | --program-transform-n=* | --program-transform-=* \ ++ | --program-transform=* | --program-transfor=* \ ++ | --program-transfo=* | --program-transf=* \ ++ | --program-trans=* | --program-tran=* \ ++ | --progr-tra=* | --program-tr=* | --program-t=*) ++ program_transform_name="$ac_optarg" ;; ++ ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ silent=yes ;; ++ ++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ++ ac_prev=sbindir ;; ++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ ++ | --sbi=* | --sb=*) ++ sbindir="$ac_optarg" ;; ++ ++ -sharedstatedir | --sharedstatedir | --sharedstatedi \ ++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ ++ | --sharedst | --shareds | --shared | --share | --shar \ ++ | --sha | --sh) ++ ac_prev=sharedstatedir ;; ++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ ++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ ++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ ++ | --sha=* | --sh=*) ++ sharedstatedir="$ac_optarg" ;; ++ ++ -site | --site | --sit) ++ ac_prev=site ;; ++ -site=* | --site=* | --sit=*) ++ site="$ac_optarg" ;; ++ ++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ++ ac_prev=srcdir ;; ++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ++ srcdir="$ac_optarg" ;; ++ ++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ ++ | --syscon | --sysco | --sysc | --sys | --sy) ++ ac_prev=sysconfdir ;; ++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ ++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) ++ sysconfdir="$ac_optarg" ;; ++ ++ -target | --target | --targe | --targ | --tar | --ta | --t) ++ ac_prev=target ;; ++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) ++ target="$ac_optarg" ;; ++ ++ -v | -verbose | --verbose | --verbos | --verbo | --verb) ++ verbose=yes ;; ++ ++ -version | --version | --versio | --versi | --vers) ++ echo "configure generated by autoconf version 2.13" ++ exit 0 ;; ++ ++ -with-* | --with-*) ++ ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` ++ # Reject names that are not valid shell variable names. ++ if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then ++ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } ++ fi ++ ac_package=`echo $ac_package| sed 's/-/_/g'` ++ case "$ac_option" in ++ *=*) ;; ++ *) ac_optarg=yes ;; ++ esac ++ eval "with_${ac_package}='$ac_optarg'" ;; ++ ++ -without-* | --without-*) ++ ac_package=`echo $ac_option|sed -e 's/-*without-//'` ++ # Reject names that are not valid shell variable names. ++ if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then ++ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } ++ fi ++ ac_package=`echo $ac_package| sed 's/-/_/g'` ++ eval "with_${ac_package}=no" ;; ++ ++ --x) ++ # Obsolete; use --with-x. ++ with_x=yes ;; ++ ++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ ++ | --x-incl | --x-inc | --x-in | --x-i) ++ ac_prev=x_includes ;; ++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ ++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) ++ x_includes="$ac_optarg" ;; ++ ++ -x-libraries | --x-libraries | --x-librarie | --x-librari \ ++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ++ ac_prev=x_libraries ;; ++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ ++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) ++ x_libraries="$ac_optarg" ;; ++ ++ -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ++ ;; ++ ++ *) ++ if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then ++ echo "configure: warning: $ac_option: invalid host type" 1>&2 ++ fi ++ if test "x$nonopt" != xNONE; then ++ { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ++ fi ++ nonopt="$ac_option" ++ ;; ++ ++ esac ++done ++ ++if test -n "$ac_prev"; then ++ { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } ++fi ++ ++trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 ++ ++# File descriptor usage: ++# 0 standard input ++# 1 file creation ++# 2 errors and warnings ++# 3 some systems may open it to /dev/tty ++# 4 used on the Kubota Titan ++# 6 checking for... messages and results ++# 5 compiler messages saved in config.log ++if test "$silent" = yes; then ++ exec 6>/dev/null ++else ++ exec 6>&1 ++fi ++exec 5>./config.log ++ ++echo "\ ++This file contains any messages produced by compilers while ++running configure, to aid debugging if configure makes a mistake. ++" 1>&5 ++ ++# Strip out --no-create and --no-recursion so they do not pile up. ++# Also quote any args containing shell metacharacters. ++ac_configure_args= ++for ac_arg ++do ++ case "$ac_arg" in ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ++ | --no-cr | --no-c) ;; ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; ++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ++ ac_configure_args="$ac_configure_args '$ac_arg'" ;; ++ *) ac_configure_args="$ac_configure_args $ac_arg" ;; ++ esac ++done ++ ++# NLS nuisances. ++# Only set these to C if already set. These must not be set unconditionally ++# because not all systems understand e.g. LANG=C (notably SCO). ++# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! ++# Non-C LC_CTYPE values break the ctype check. ++if test "${LANG+set}" = set; then LANG=C; export LANG; fi ++if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi ++if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi ++if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi ++ ++# confdefs.h avoids OS command line length limits that DEFS can exceed. ++rm -rf conftest* confdefs.h ++# AIX cpp loses on an empty file, so make sure it contains at least a newline. ++echo > confdefs.h ++ ++# A filename unique to this package, relative to the directory that ++# configure is in, which we can look for to find out if srcdir is correct. ++ac_unique_file=syscalls.c ++ ++# Find the source files, if location was not specified. ++if test -z "$srcdir"; then ++ ac_srcdir_defaulted=yes ++ # Try the directory containing this script, then its parent. ++ ac_prog=$0 ++ ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` ++ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. ++ srcdir=$ac_confdir ++ if test ! -r $srcdir/$ac_unique_file; then ++ srcdir=.. ++ fi ++else ++ ac_srcdir_defaulted=no ++fi ++if test ! -r $srcdir/$ac_unique_file; then ++ if test "$ac_srcdir_defaulted" = yes; then ++ { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } ++ else ++ { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } ++ fi ++fi ++srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` ++ ++# Prefer explicitly selected file to automatically selected ones. ++if test -z "$CONFIG_SITE"; then ++ if test "x$prefix" != xNONE; then ++ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" ++ else ++ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" ++ fi ++fi ++for ac_site_file in $CONFIG_SITE; do ++ if test -r "$ac_site_file"; then ++ echo "loading site script $ac_site_file" ++ . "$ac_site_file" ++ fi ++done ++ ++if test -r "$cache_file"; then ++ echo "loading cache $cache_file" ++ . $cache_file ++else ++ echo "creating cache $cache_file" ++ > $cache_file ++fi ++ ++ac_ext=c ++# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ++ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ++cross_compiling=$ac_cv_prog_cc_cross ++ ++ac_exeext= ++ac_objext=o ++if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then ++ # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. ++ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ++ ac_n= ac_c=' ++' ac_t=' ' ++ else ++ ac_n=-n ac_c= ac_t= ++ fi ++else ++ ac_n= ac_c='\c' ac_t= ++fi ++ ++ ++ ++ac_aux_dir= ++for ac_dir in ../../../.. $srcdir/../../../..; do ++ if test -f $ac_dir/install-sh; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install-sh -c" ++ break ++ elif test -f $ac_dir/install.sh; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install.sh -c" ++ break ++ fi ++done ++if test -z "$ac_aux_dir"; then ++ { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; } ++fi ++ac_config_guess=$ac_aux_dir/config.guess ++ac_config_sub=$ac_aux_dir/config.sub ++ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. ++ ++ ++am__api_version="1.4" ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# ./install, which can be erroneously created by make from ./install.sh. ++echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 ++echo "configure:578: checking for a BSD compatible install" >&5 ++if test -z "$INSTALL"; then ++if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" ++ for ac_dir in $PATH; do ++ # Account for people who put trailing slashes in PATH elements. ++ case "$ac_dir/" in ++ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ if test -f $ac_dir/$ac_prog; then ++ if test $ac_prog = install && ++ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ else ++ ac_cv_path_install="$ac_dir/$ac_prog -c" ++ break 2 ++ fi ++ fi ++ done ++ ;; ++ esac ++ done ++ IFS="$ac_save_IFS" ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL="$ac_cv_path_install" ++ else ++ # As a last resort, use the slow shell script. We don't cache a ++ # path for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the path is relative. ++ INSTALL="$ac_install_sh" ++ fi ++fi ++echo "$ac_t""$INSTALL" 1>&6 ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 ++echo "configure:631: checking whether build environment is sane" >&5 ++# Just in case ++sleep 1 ++echo timestamp > conftestfile ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` ++ if test "$*" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftestfile` ++ fi ++ if test "$*" != "X $srcdir/configure conftestfile" \ ++ && test "$*" != "X conftestfile $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ { echo "configure: error: ls -t appears to fail. Make sure there is not a broken ++alias in your environment" 1>&2; exit 1; } ++ fi ++ ++ test "$2" = conftestfile ++ ) ++then ++ # Ok. ++ : ++else ++ { echo "configure: error: newly created file is older than distributed files! ++Check your system clock" 1>&2; exit 1; } ++fi ++rm -f conftest* ++echo "$ac_t""yes" 1>&6 ++if test "$program_transform_name" = s,x,x,; then ++ program_transform_name= ++else ++ # Double any \ or $. echo might interpret backslashes. ++ cat <<\EOF_SED > conftestsed ++s,\\,\\\\,g; s,\$,$$,g ++EOF_SED ++ program_transform_name="`echo $program_transform_name|sed -f conftestsed`" ++ rm -f conftestsed ++fi ++test "$program_prefix" != NONE && ++ program_transform_name="s,^,${program_prefix},; $program_transform_name" ++# Use a double $ so make ignores it. ++test "$program_suffix" != NONE && ++ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" ++ ++# sed with no file args requires a program. ++test "$program_transform_name" = "" && program_transform_name="s,x,x," ++ ++echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 ++echo "configure:688: checking whether ${MAKE-make} sets \${MAKE}" >&5 ++set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` ++if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ cat > conftestmake <<\EOF ++all: ++ @echo 'ac_maketemp="${MAKE}"' ++EOF ++# GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` ++if test -n "$ac_maketemp"; then ++ eval ac_cv_prog_make_${ac_make}_set=yes ++else ++ eval ac_cv_prog_make_${ac_make}_set=no ++fi ++rm -f conftestmake ++fi ++if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then ++ echo "$ac_t""yes" 1>&6 ++ SET_MAKE= ++else ++ echo "$ac_t""no" 1>&6 ++ SET_MAKE="MAKE=${MAKE-make}" ++fi ++ ++if test $host != $build; then ++ ac_tool_prefix=${host_alias}- ++else ++ ac_tool_prefix= ++fi ++ ++echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 ++echo "configure:721: checking for Cygwin environment" >&5 ++if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ cat > conftest.$ac_ext <<EOF ++#line 726 "configure" ++#include "confdefs.h" ++ ++int main() { ++ ++#ifndef __CYGWIN__ ++#define __CYGWIN__ __CYGWIN32__ ++#endif ++return __CYGWIN__; ++; return 0; } ++EOF ++if { (eval echo configure:737: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then ++ rm -rf conftest* ++ ac_cv_cygwin=yes ++else ++ echo "configure: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 ++ rm -rf conftest* ++ ac_cv_cygwin=no ++fi ++rm -f conftest* ++rm -f conftest* ++fi ++ ++echo "$ac_t""$ac_cv_cygwin" 1>&6 ++CYGWIN= ++test "$ac_cv_cygwin" = yes && CYGWIN=yes ++echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 ++echo "configure:754: checking for mingw32 environment" >&5 ++if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ cat > conftest.$ac_ext <<EOF ++#line 759 "configure" ++#include "confdefs.h" ++ ++int main() { ++return __MINGW32__; ++; return 0; } ++EOF ++if { (eval echo configure:766: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then ++ rm -rf conftest* ++ ac_cv_mingw32=yes ++else ++ echo "configure: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 ++ rm -rf conftest* ++ ac_cv_mingw32=no ++fi ++rm -f conftest* ++rm -f conftest* ++fi ++ ++echo "$ac_t""$ac_cv_mingw32" 1>&6 ++MINGW32= ++test "$ac_cv_mingw32" = yes && MINGW32=yes ++ ++# Check whether --enable-multilib or --disable-multilib was given. ++if test "${enable_multilib+set}" = set; then ++ enableval="$enable_multilib" ++ case "${enableval}" in ++ yes) multilib=yes ;; ++ no) multilib=no ;; ++ *) { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;; ++ esac ++else ++ multilib=yes ++fi ++ ++# Check whether --enable-target-optspace or --disable-target-optspace was given. ++if test "${enable_target_optspace+set}" = set; then ++ enableval="$enable_target_optspace" ++ case "${enableval}" in ++ yes) target_optspace=yes ;; ++ no) target_optspace=no ;; ++ *) { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;; ++ esac ++else ++ target_optspace= ++fi ++ ++# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. ++if test "${enable_malloc_debugging+set}" = set; then ++ enableval="$enable_malloc_debugging" ++ case "${enableval}" in ++ yes) malloc_debugging=yes ;; ++ no) malloc_debugging=no ;; ++ *) { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;; ++ esac ++else ++ malloc_debugging= ++fi ++ ++# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given. ++if test "${enable_newlib_multithread+set}" = set; then ++ enableval="$enable_newlib_multithread" ++ case "${enableval}" in ++ yes) newlib_multithread=yes ;; ++ no) newlib_multithread=no ;; ++ *) { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;; ++ esac ++else ++ newlib_multithread=yes ++fi ++ ++# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given. ++if test "${enable_newlib_iconv+set}" = set; then ++ enableval="$enable_newlib_iconv" ++ if test "${newlib_iconv+set}" != set; then ++ case "${enableval}" in ++ yes) newlib_iconv=yes ;; ++ no) newlib_iconv=no ;; ++ *) { echo "configure: error: bad value ${enableval} for newlib-iconv option" 1>&2; exit 1; } ;; ++ esac ++ fi ++else ++ newlib_iconv=${newlib_iconv} ++fi ++ ++# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given. ++if test "${enable_newlib_elix_level+set}" = set; then ++ enableval="$enable_newlib_elix_level" ++ case "${enableval}" in ++ 0) newlib_elix_level=0 ;; ++ 1) newlib_elix_level=1 ;; ++ 2) newlib_elix_level=2 ;; ++ 3) newlib_elix_level=3 ;; ++ 4) newlib_elix_level=4 ;; ++ *) { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;; ++ esac ++else ++ newlib_elix_level=0 ++fi ++ ++# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given. ++if test "${enable_newlib_io_float+set}" = set; then ++ enableval="$enable_newlib_io_float" ++ case "${enableval}" in ++ yes) newlib_io_float=yes ;; ++ no) newlib_io_float=no ;; ++ *) { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;; ++ esac ++else ++ newlib_io_float=yes ++fi ++ ++# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given. ++if test "${enable_newlib_supplied_syscalls+set}" = set; then ++ enableval="$enable_newlib_supplied_syscalls" ++ case "${enableval}" in ++ yes) newlib_may_supply_syscalls=yes ;; ++ no) newlib_may_supply_syscalls=no ;; ++ *) { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;; ++ esac ++else ++ newlib_may_supply_syscalls=yes ++fi ++ ++ ++ ++if test x${newlib_may_supply_syscalls} = xyes; then ++ MAY_SUPPLY_SYSCALLS_TRUE= ++ MAY_SUPPLY_SYSCALLS_FALSE='#' ++else ++ MAY_SUPPLY_SYSCALLS_TRUE='#' ++ MAY_SUPPLY_SYSCALLS_FALSE= ++fi ++ ++ ++test -z "${with_target_subdir}" && with_target_subdir=. ++ ++if test "${srcdir}" = "."; then ++ if test "${with_target_subdir}" != "."; then ++ newlib_basedir="${srcdir}/${with_multisrctop}../../../.." ++ else ++ newlib_basedir="${srcdir}/${with_multisrctop}../../.." ++ fi ++else ++ newlib_basedir="${srcdir}/../../.." ++fi ++ ++ ++ ++# Do some error checking and defaulting for the host and target type. ++# The inputs are: ++# configure --host=HOST --target=TARGET --build=BUILD NONOPT ++# ++# The rules are: ++# 1. You are not allowed to specify --host, --target, and nonopt at the ++# same time. ++# 2. Host defaults to nonopt. ++# 3. If nonopt is not specified, then host defaults to the current host, ++# as determined by config.guess. ++# 4. Target and build default to nonopt. ++# 5. If nonopt is not specified, then target and build default to host. ++ ++# The aliases save the names the user supplied, while $host etc. ++# will get canonicalized. ++case $host---$target---$nonopt in ++NONE---*---* | *---NONE---* | *---*---NONE) ;; ++*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; ++esac ++ ++ ++# Make sure we can run config.sub. ++if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : ++else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } ++fi ++ ++echo $ac_n "checking host system type""... $ac_c" 1>&6 ++echo "configure:936: checking host system type" >&5 ++ ++host_alias=$host ++case "$host_alias" in ++NONE) ++ case $nonopt in ++ NONE) ++ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : ++ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } ++ fi ;; ++ *) host_alias=$nonopt ;; ++ esac ;; ++esac ++ ++host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` ++host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ++host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ++host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++echo "$ac_t""$host" 1>&6 ++ ++echo $ac_n "checking target system type""... $ac_c" 1>&6 ++echo "configure:957: checking target system type" >&5 ++ ++target_alias=$target ++case "$target_alias" in ++NONE) ++ case $nonopt in ++ NONE) target_alias=$host_alias ;; ++ *) target_alias=$nonopt ;; ++ esac ;; ++esac ++ ++target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` ++target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ++target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ++target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++echo "$ac_t""$target" 1>&6 ++ ++echo $ac_n "checking build system type""... $ac_c" 1>&6 ++echo "configure:975: checking build system type" >&5 ++ ++build_alias=$build ++case "$build_alias" in ++NONE) ++ case $nonopt in ++ NONE) build_alias=$host_alias ;; ++ *) build_alias=$nonopt ;; ++ esac ;; ++esac ++ ++build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` ++build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ++build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ++build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++echo "$ac_t""$build" 1>&6 ++ ++test "$host_alias" != "$target_alias" && ++ test "$program_prefix$program_suffix$program_transform_name" = \ ++ NONENONEs,x,x, && ++ program_prefix=${target_alias}- ++ ++ ++ ++PACKAGE=newlib ++ ++VERSION=1.12.0 ++ ++if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then ++ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } ++fi ++cat >> confdefs.h <<EOF ++#define PACKAGE "$PACKAGE" ++EOF ++ ++cat >> confdefs.h <<EOF ++#define VERSION "$VERSION" ++EOF ++ ++ ++ ++missing_dir=`cd $ac_aux_dir && pwd` ++echo $ac_n "checking for working aclocal-${am__api_version}""... $ac_c" 1>&6 ++echo "configure:1018: checking for working aclocal-${am__api_version}" >&5 ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then ++ ACLOCAL=aclocal-${am__api_version} ++ echo "$ac_t""found" 1>&6 ++else ++ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" ++ echo "$ac_t""missing" 1>&6 ++fi ++ ++echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 ++echo "configure:1031: checking for working autoconf" >&5 ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if (autoconf --version) < /dev/null > /dev/null 2>&1; then ++ AUTOCONF=autoconf ++ echo "$ac_t""found" 1>&6 ++else ++ AUTOCONF="$missing_dir/missing autoconf" ++ echo "$ac_t""missing" 1>&6 ++fi ++ ++echo $ac_n "checking for working automake-${am__api_version}""... $ac_c" 1>&6 ++echo "configure:1044: checking for working automake-${am__api_version}" >&5 ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then ++ AUTOMAKE=automake-${am__api_version} ++ echo "$ac_t""found" 1>&6 ++else ++ AUTOMAKE="$missing_dir/missing automake-${am__api_version}" ++ echo "$ac_t""missing" 1>&6 ++fi ++ ++echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 ++echo "configure:1057: checking for working autoheader" >&5 ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if (autoheader --version) < /dev/null > /dev/null 2>&1; then ++ AUTOHEADER=autoheader ++ echo "$ac_t""found" 1>&6 ++else ++ AUTOHEADER="$missing_dir/missing autoheader" ++ echo "$ac_t""missing" 1>&6 ++fi ++ ++echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 ++echo "configure:1070: checking for working makeinfo" >&5 ++# Run test in a subshell; some versions of sh will print an error if ++# an executable is not found, even if stderr is redirected. ++# Redirect stdin to placate older versions of autoconf. Sigh. ++if (makeinfo --version) < /dev/null > /dev/null 2>&1; then ++ MAKEINFO=makeinfo ++ echo "$ac_t""found" 1>&6 ++else ++ MAKEINFO="$missing_dir/missing makeinfo" ++ echo "$ac_t""missing" 1>&6 ++fi ++ ++ ++ ++# FIXME: We temporarily define our own version of AC_PROG_CC. This is ++# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We ++# are probably using a cross compiler, which will not be able to fully ++# link an executable. This should really be fixed in autoconf ++# itself. ++ ++ ++ ++# Extract the first word of "gcc", so it can be a program name with args. ++set dummy gcc; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1095: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ ac_cv_prog_CC="gcc" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++fi ++fi ++CC="$ac_cv_prog_CC" ++if test -n "$CC"; then ++ echo "$ac_t""$CC" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++if test -z "$CC"; then ++ # Extract the first word of "cc", so it can be a program name with args. ++set dummy cc; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1125: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_prog_rejected=no ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ++ ac_prog_rejected=yes ++ continue ++ fi ++ ac_cv_prog_CC="cc" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++if test $ac_prog_rejected = yes; then ++ # We found a bogon in the path, so make sure we never use it. ++ set dummy $ac_cv_prog_CC ++ shift ++ if test $# -gt 0; then ++ # We chose a different compiler from the bogus one. ++ # However, it has the same basename, so the bogon will be chosen ++ # first if we set CC to just the basename; use the full file name. ++ shift ++ set dummy "$ac_dir/$ac_word" "$@" ++ shift ++ ac_cv_prog_CC="$@" ++ fi ++fi ++fi ++fi ++CC="$ac_cv_prog_CC" ++if test -n "$CC"; then ++ echo "$ac_t""$CC" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } ++fi ++ ++echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 ++echo "configure:1174: checking whether we are using GNU C" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ cat > conftest.c <<EOF ++#ifdef __GNUC__ ++ yes; ++#endif ++EOF ++if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1183: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ++ ac_cv_prog_gcc=yes ++else ++ ac_cv_prog_gcc=no ++fi ++fi ++ ++echo "$ac_t""$ac_cv_prog_gcc" 1>&6 ++ ++if test $ac_cv_prog_gcc = yes; then ++ GCC=yes ++ ac_test_CFLAGS="${CFLAGS+set}" ++ ac_save_CFLAGS="$CFLAGS" ++ CFLAGS= ++ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 ++echo "configure:1198: checking whether ${CC-cc} accepts -g" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ echo 'void f(){}' > conftest.c ++if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ++ ac_cv_prog_cc_g=yes ++else ++ ac_cv_prog_cc_g=no ++fi ++rm -f conftest* ++ ++fi ++ ++echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 ++ if test "$ac_test_CFLAGS" = set; then ++ CFLAGS="$ac_save_CFLAGS" ++ elif test $ac_cv_prog_cc_g = yes; then ++ CFLAGS="-g -O2" ++ else ++ CFLAGS="-O2" ++ fi ++else ++ GCC= ++ test "${CFLAGS+set}" = set || CFLAGS="-g" ++fi ++ ++ ++# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. ++set dummy ${ac_tool_prefix}as; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1229: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$AS"; then ++ ac_cv_prog_AS="$AS" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ ac_cv_prog_AS="${ac_tool_prefix}as" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as" ++fi ++fi ++AS="$ac_cv_prog_AS" ++if test -n "$AS"; then ++ echo "$ac_t""$AS" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++ ++ ++# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ar; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1261: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$AR"; then ++ ac_cv_prog_AR="$AR" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ ac_cv_prog_AR="${ac_tool_prefix}ar" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar" ++fi ++fi ++AR="$ac_cv_prog_AR" ++if test -n "$AR"; then ++ echo "$ac_t""$AR" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++ ++ ++# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1293: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++fi ++fi ++RANLIB="$ac_cv_prog_RANLIB" ++if test -n "$RANLIB"; then ++ echo "$ac_t""$RANLIB" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++ ++if test -z "$ac_cv_prog_RANLIB"; then ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 ++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ++echo "configure:1325: checking for $ac_word" >&5 ++if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++else ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ++ ac_dummy="$PATH" ++ for ac_dir in $ac_dummy; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ ac_cv_prog_RANLIB="ranlib" ++ break ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" ++fi ++fi ++RANLIB="$ac_cv_prog_RANLIB" ++if test -n "$RANLIB"; then ++ echo "$ac_t""$RANLIB" 1>&6 ++else ++ echo "$ac_t""no" 1>&6 ++fi ++ ++else ++ RANLIB=":" ++fi ++fi ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# ./install, which can be erroneously created by make from ./install.sh. ++echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 ++echo "configure:1370: checking for a BSD compatible install" >&5 ++if test -z "$INSTALL"; then ++if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" ++ for ac_dir in $PATH; do ++ # Account for people who put trailing slashes in PATH elements. ++ case "$ac_dir/" in ++ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ if test -f $ac_dir/$ac_prog; then ++ if test $ac_prog = install && ++ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ else ++ ac_cv_path_install="$ac_dir/$ac_prog -c" ++ break 2 ++ fi ++ fi ++ done ++ ;; ++ esac ++ done ++ IFS="$ac_save_IFS" ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL="$ac_cv_path_install" ++ else ++ # As a last resort, use the slow shell script. We don't cache a ++ # path for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the path is relative. ++ INSTALL="$ac_install_sh" ++ fi ++fi ++echo "$ac_t""$INSTALL" 1>&6 ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++ ++echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 ++echo "configure:1424: checking whether to enable maintainer-specific portions of Makefiles" >&5 ++ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. ++if test "${enable_maintainer_mode+set}" = set; then ++ enableval="$enable_maintainer_mode" ++ USE_MAINTAINER_MODE=$enableval ++else ++ USE_MAINTAINER_MODE=no ++fi ++ ++ echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 ++ ++ ++if test $USE_MAINTAINER_MODE = yes; then ++ MAINTAINER_MODE_TRUE= ++ MAINTAINER_MODE_FALSE='#' ++else ++ MAINTAINER_MODE_TRUE='#' ++ MAINTAINER_MODE_FALSE= ++fi ++ MAINT=$MAINTAINER_MODE_TRUE ++ ++ ++ ++# We need AC_EXEEXT to keep automake happy in cygnus mode. However, ++# at least currently, we never actually build a program, so we never ++# need to use $(EXEEXT). Moreover, the test for EXEEXT normally ++# fails, because we are probably configuring with a cross compiler ++# which can't create executables. So we include AC_EXEEXT to keep ++# automake happy, but we don't execute it, since we don't care about ++# the result. ++if false; then ++ ++ ++echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 ++echo "configure:1458: checking for executable suffix" >&5 ++if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then ++ echo $ac_n "(cached) $ac_c" 1>&6 ++else ++ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then ++ ac_cv_exeext=.exe ++else ++ rm -f conftest* ++ echo 'int main () { return 0; }' > conftest.$ac_ext ++ ac_cv_exeext= ++ if { (eval echo configure:1468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then ++ for file in conftest.*; do ++ case $file in ++ *.c | *.o | *.obj) ;; ++ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; ++ esac ++ done ++ else ++ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } ++ fi ++ rm -f conftest* ++ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no ++fi ++fi ++ ++EXEEXT="" ++test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} ++echo "$ac_t""${ac_cv_exeext}" 1>&6 ++ac_exeext=$EXEEXT ++ ++fi ++ ++. ${newlib_basedir}/configure.host ++ ++newlib_cflags="${newlib_cflags} -fno-builtin" ++ ++NEWLIB_CFLAGS=${newlib_cflags} ++ ++ ++LDFLAGS=${ldflags} ++ ++ ++ ++ ++if test x${newlib_elix_level} = x0; then ++ ELIX_LEVEL_0_TRUE= ++ ELIX_LEVEL_0_FALSE='#' ++else ++ ELIX_LEVEL_0_TRUE='#' ++ ELIX_LEVEL_0_FALSE= ++fi ++ ++ ++if test x${newlib_elix_level} = x1; then ++ ELIX_LEVEL_1_TRUE= ++ ELIX_LEVEL_1_FALSE='#' ++else ++ ELIX_LEVEL_1_TRUE='#' ++ ELIX_LEVEL_1_FALSE= ++fi ++ ++ ++if test x${newlib_elix_level} = x2; then ++ ELIX_LEVEL_2_TRUE= ++ ELIX_LEVEL_2_FALSE='#' ++else ++ ELIX_LEVEL_2_TRUE='#' ++ ELIX_LEVEL_2_FALSE= ++fi ++ ++ ++if test x${newlib_elix_level} = x3; then ++ ELIX_LEVEL_3_TRUE= ++ ELIX_LEVEL_3_FALSE='#' ++else ++ ELIX_LEVEL_3_TRUE='#' ++ ELIX_LEVEL_3_FALSE= ++fi ++ ++ ++if test x${newlib_elix_level} = x4; then ++ ELIX_LEVEL_4_TRUE= ++ ELIX_LEVEL_4_FALSE='#' ++else ++ ELIX_LEVEL_4_TRUE='#' ++ ELIX_LEVEL_4_FALSE= ++fi ++ ++ ++ ++if test x${use_libtool} = xyes; then ++ USE_LIBTOOL_TRUE= ++ USE_LIBTOOL_FALSE='#' ++else ++ USE_LIBTOOL_TRUE='#' ++ USE_LIBTOOL_FALSE= ++fi ++ ++# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we ++# use oext, which is set in configure.host based on the target platform. ++OBJEXT=${oext} ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++trap '' 1 2 15 ++cat > confcache <<\EOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs. It is not useful on other systems. ++# If it contains results you don't want to keep, you may remove or edit it. ++# ++# By default, configure uses ./config.cache as the cache file, ++# creating it if it does not exist already. You can give configure ++# the --cache-file=FILE option to use a different cache file; that is ++# what configure does when it calls configure scripts in ++# subdirectories, so they share the cache. ++# Giving --cache-file=/dev/null disables caching, for debugging configure. ++# config.status only pays attention to the cache file if you give it the ++# --recheck option to rerun configure. ++# ++EOF ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, don't put newlines in cache variables' values. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++(set) 2>&1 | ++ case `(ac_space=' '; set | grep ac_space) 2>&1` in ++ *ac_space=\ *) ++ # `set' does not quote correctly, so add quotes (double-quote substitution ++ # turns \\\\ into \\, and sed turns \\ into \). ++ sed -n \ ++ -e "s/'/'\\\\''/g" \ ++ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ++ ;; ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ++ ;; ++ esac >> confcache ++if cmp -s $cache_file confcache; then ++ : ++else ++ if test -w $cache_file; then ++ echo "updating cache $cache_file" ++ cat confcache > $cache_file ++ else ++ echo "not updating unwritable cache $cache_file" ++ fi ++fi ++rm -f confcache ++ ++trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 ++ ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++ ++# Any assignment to VPATH causes Sun make to only execute ++# the first set of double-colon rules, so remove it if not needed. ++# If there is a colon in the path, we need to keep it. ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' ++fi ++ ++trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 ++ ++# Transform confdefs.h into DEFS. ++# Protect against shell expansion while executing Makefile rules. ++# Protect against Makefile macro expansion. ++cat > conftest.defs <<\EOF ++s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g ++s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g ++s%\[%\\&%g ++s%\]%\\&%g ++s%\$%$$%g ++EOF ++DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` ++rm -f conftest.defs ++ ++ ++# Without the "./", some shells look in PATH for config.status. ++: ${CONFIG_STATUS=./config.status} ++ ++echo creating $CONFIG_STATUS ++rm -f $CONFIG_STATUS ++cat > $CONFIG_STATUS <<EOF ++#! /bin/sh ++# Generated automatically by configure. ++# Run this file to recreate the current configuration. ++# This directory was configured as follows, ++# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# ++# $0 $ac_configure_args ++# ++# Compiler output produced by configure, useful for debugging ++# configure, is in ./config.log if it exists. ++ ++ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" ++for ac_option ++do ++ case "\$ac_option" in ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" ++ exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; ++ -version | --version | --versio | --versi | --vers | --ver | --ve | --v) ++ echo "$CONFIG_STATUS generated by autoconf version 2.13" ++ exit 0 ;; ++ -help | --help | --hel | --he | --h) ++ echo "\$ac_cs_usage"; exit 0 ;; ++ *) echo "\$ac_cs_usage"; exit 1 ;; ++ esac ++done ++ ++ac_given_srcdir=$srcdir ++ac_given_INSTALL="$INSTALL" ++ ++trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 ++EOF ++cat >> $CONFIG_STATUS <<EOF ++ ++# Protect against being on the right side of a sed subst in config.status. ++sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; ++ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF ++$ac_vpsub ++$extrasub ++s%@SHELL@%$SHELL%g ++s%@CFLAGS@%$CFLAGS%g ++s%@CPPFLAGS@%$CPPFLAGS%g ++s%@CXXFLAGS@%$CXXFLAGS%g ++s%@FFLAGS@%$FFLAGS%g ++s%@DEFS@%$DEFS%g ++s%@LDFLAGS@%$LDFLAGS%g ++s%@LIBS@%$LIBS%g ++s%@exec_prefix@%$exec_prefix%g ++s%@prefix@%$prefix%g ++s%@program_transform_name@%$program_transform_name%g ++s%@bindir@%$bindir%g ++s%@sbindir@%$sbindir%g ++s%@libexecdir@%$libexecdir%g ++s%@datadir@%$datadir%g ++s%@sysconfdir@%$sysconfdir%g ++s%@sharedstatedir@%$sharedstatedir%g ++s%@localstatedir@%$localstatedir%g ++s%@libdir@%$libdir%g ++s%@includedir@%$includedir%g ++s%@oldincludedir@%$oldincludedir%g ++s%@infodir@%$infodir%g ++s%@mandir@%$mandir%g ++s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g ++s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g ++s%@newlib_basedir@%$newlib_basedir%g ++s%@host@%$host%g ++s%@host_alias@%$host_alias%g ++s%@host_cpu@%$host_cpu%g ++s%@host_vendor@%$host_vendor%g ++s%@host_os@%$host_os%g ++s%@target@%$target%g ++s%@target_alias@%$target_alias%g ++s%@target_cpu@%$target_cpu%g ++s%@target_vendor@%$target_vendor%g ++s%@target_os@%$target_os%g ++s%@build@%$build%g ++s%@build_alias@%$build_alias%g ++s%@build_cpu@%$build_cpu%g ++s%@build_vendor@%$build_vendor%g ++s%@build_os@%$build_os%g ++s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g ++s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g ++s%@INSTALL_DATA@%$INSTALL_DATA%g ++s%@PACKAGE@%$PACKAGE%g ++s%@VERSION@%$VERSION%g ++s%@ACLOCAL@%$ACLOCAL%g ++s%@AUTOCONF@%$AUTOCONF%g ++s%@AUTOMAKE@%$AUTOMAKE%g ++s%@AUTOHEADER@%$AUTOHEADER%g ++s%@MAKEINFO@%$MAKEINFO%g ++s%@SET_MAKE@%$SET_MAKE%g ++s%@CC@%$CC%g ++s%@AS@%$AS%g ++s%@AR@%$AR%g ++s%@RANLIB@%$RANLIB%g ++s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g ++s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g ++s%@MAINT@%$MAINT%g ++s%@EXEEXT@%$EXEEXT%g ++s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g ++s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g ++s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g ++s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g ++s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g ++s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g ++s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g ++s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g ++s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g ++s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g ++s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g ++s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g ++s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g ++s%@OBJEXT@%$OBJEXT%g ++s%@oext@%$oext%g ++s%@aext@%$aext%g ++s%@libm_machine_dir@%$libm_machine_dir%g ++s%@machine_dir@%$machine_dir%g ++s%@sys_dir@%$sys_dir%g ++ ++CEOF ++EOF ++ ++cat >> $CONFIG_STATUS <<\EOF ++ ++# Split the substitutions into bite-sized pieces for seds with ++# small command number limits, like on Digital OSF/1 and HP-UX. ++ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ++ac_file=1 # Number of current file. ++ac_beg=1 # First line for current file. ++ac_end=$ac_max_sed_cmds # Line after last line for current file. ++ac_more_lines=: ++ac_sed_cmds="" ++while $ac_more_lines; do ++ if test $ac_beg -gt 1; then ++ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file ++ else ++ sed "${ac_end}q" conftest.subs > conftest.s$ac_file ++ fi ++ if test ! -s conftest.s$ac_file; then ++ ac_more_lines=false ++ rm -f conftest.s$ac_file ++ else ++ if test -z "$ac_sed_cmds"; then ++ ac_sed_cmds="sed -f conftest.s$ac_file" ++ else ++ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" ++ fi ++ ac_file=`expr $ac_file + 1` ++ ac_beg=$ac_end ++ ac_end=`expr $ac_end + $ac_max_sed_cmds` ++ fi ++done ++if test -z "$ac_sed_cmds"; then ++ ac_sed_cmds=cat ++fi ++EOF ++ ++cat >> $CONFIG_STATUS <<EOF ++ ++CONFIG_FILES=\${CONFIG_FILES-"Makefile"} ++EOF ++cat >> $CONFIG_STATUS <<\EOF ++for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then ++ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ++ case "$ac_file" in ++ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ++ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; ++ *) ac_file_in="${ac_file}.in" ;; ++ esac ++ ++ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. ++ ++ # Remove last slash and all that follows it. Not all systems have dirname. ++ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` ++ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then ++ # The file is in a subdirectory. ++ test ! -d "$ac_dir" && mkdir "$ac_dir" ++ ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" ++ # A "../" for each directory in $ac_dir_suffix. ++ ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` ++ else ++ ac_dir_suffix= ac_dots= ++ fi ++ ++ case "$ac_given_srcdir" in ++ .) srcdir=. ++ if test -z "$ac_dots"; then top_srcdir=. ++ else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; ++ /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; ++ *) # Relative path. ++ srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" ++ top_srcdir="$ac_dots$ac_given_srcdir" ;; ++ esac ++ ++ case "$ac_given_INSTALL" in ++ [/$]*) INSTALL="$ac_given_INSTALL" ;; ++ *) INSTALL="$ac_dots$ac_given_INSTALL" ;; ++ esac ++ ++ echo creating "$ac_file" ++ rm -f "$ac_file" ++ configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." ++ case "$ac_file" in ++ *Makefile*) ac_comsub="1i\\ ++# $configure_input" ;; ++ *) ac_comsub= ;; ++ esac ++ ++ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` ++ sed -e "$ac_comsub ++s%@configure_input@%$configure_input%g ++s%@srcdir@%$srcdir%g ++s%@top_srcdir@%$top_srcdir%g ++s%@INSTALL@%$INSTALL%g ++" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file ++fi; done ++rm -f conftest.s* ++ ++EOF ++cat >> $CONFIG_STATUS <<EOF ++ ++EOF ++cat >> $CONFIG_STATUS <<\EOF ++ ++exit 0 ++EOF ++chmod +x $CONFIG_STATUS ++rm -fr confdefs* $ac_clean_files ++test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 ++ +diff -urN newlib-1.14.0-orig/newlib/libc/sys/bfin/configure.in newlib-1.14.0/newlib/libc/sys/bfin/configure.in +--- newlib-1.14.0-orig/newlib/libc/sys/bfin/configure.in 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/sys/bfin/configure.in 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,12 @@ ++dnl This is the newlib/libc/sys/bfin configure.in file. ++dnl Process this file with autoconf to produce a configure script. ++ ++AC_PREREQ(2.5) ++AC_INIT(syscalls.c) ++ ++dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. ++AC_CONFIG_AUX_DIR(../../../..) ++ ++NEWLIB_CONFIGURE(../../..) ++ ++AC_OUTPUT(Makefile) +diff -urN newlib-1.14.0-orig/newlib/libc/sys/bfin/crt0.S newlib-1.14.0/newlib/libc/sys/bfin/crt0.S +--- newlib-1.14.0-orig/newlib/libc/sys/bfin/crt0.S 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/sys/bfin/crt0.S 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,68 @@ ++ .text ++ .align 2 ++ ++ .global __start ++__start: ++ ++ /* Start by setting up a stack */ ++ /* Zero the memory in the .bss section. */ ++ ++ p0.l = __edata; ++ p0.h = __edata; ++ p1.l = __end; ++ p1.h = __end; ++ p1 -= p0; ++ r0 = 0; ++ lsetup (L$L$clear_bss, L$L$clear_bss) lc0 = p1; ++L$L$clear_bss: ++ B [p0++] = r0; ++ ++#ifdef __BFIN_FDPIC__ ++ /* Set up GOT pointer. */ ++ P0.L = __ROFIXUP_END__; ++ P0.H = __ROFIXUP_END__; ++ P4 = [P0 - 4]; ++#endif ++ ++ /* Need to set up standard file handles */ ++ /* Parse string at r1 */ ++ ++ p0.l = __init; ++ p0.h = __init; ++ P3 = P4; ++ call (p0) ++ ++ p0.l = _atexit; ++ p0.h = _atexit; ++#ifdef __BFIN_FDPIC__ ++ r0 = [P4 + __fini@FUNCDESC_GOT17M4] ; ++ P3 = P4; ++#else ++ r0.l = __fini; ++ r0.h = __fini; ++#endif ++ call (p0) ++ ++ p0.l = _initialise_monitor_handles; ++ p0.h = _initialise_monitor_handles; ++ P3 = P4; ++ call (p0) ++ ++ p0.l = ___setup_argv_and_call_main; ++ p0.h = ___setup_argv_and_call_main; ++ P3 = P4; ++ call (p0) ++ ++ p0.l = _exit; ++ p0.h = _exit; ++ P3 = P4; ++ jump (p0) /* Should not return. */ ++ ++ .data ++/* Data returned by monitor SWI. */ ++.global __stack_base__ ++HeapBase: .dd 0 ++HeapLimit: .dd 0 ++__stack_base__: .dd 0 ++StackLimit: .dd 0 ++CommandLine: .space 256,0 /* Maximum length of 255 chars handled. */ +diff -urN newlib-1.14.0-orig/newlib/libc/sys/bfin/libcfunc.c newlib-1.14.0/newlib/libc/sys/bfin/libcfunc.c +--- newlib-1.14.0-orig/newlib/libc/sys/bfin/libcfunc.c 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/sys/bfin/libcfunc.c 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,18 @@ ++/* Support files for GNU libc. Files in the C namespace go here. ++ Files in the system namespace (ie those that start with an underscore) ++ go in syscalls.c. ++ ++ Note: These functions are in a seperate file so that OS providers can ++ overrride the system call stubs (defined in syscalls.c) without having ++ to provide libc funcitons as well. */ ++ ++void ++abort (void) ++{ ++ asm ("" :: "i" (0)); ++} ++ ++void ++alarm (void) ++{ ++} +diff -urN newlib-1.14.0-orig/newlib/libc/sys/bfin/Makefile.am newlib-1.14.0/newlib/libc/sys/bfin/Makefile.am +--- newlib-1.14.0-orig/newlib/libc/sys/bfin/Makefile.am 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/sys/bfin/Makefile.am 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,14 @@ ++## Process this file with automake to generate Makefile.in ++ ++AUTOMAKE_OPTIONS = cygnus ++ ++INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) ++ ++noinst_LIBRARIES = lib.a ++ ++lib_a_SOURCES = libcfunc.c syscalls.c ++ ++all: crt0.o ++ ++ACLOCAL_AMFLAGS = -I ../../.. ++CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host +diff -urN newlib-1.14.0-orig/newlib/libc/sys/bfin/Makefile.in newlib-1.14.0/newlib/libc/sys/bfin/Makefile.in +--- newlib-1.14.0-orig/newlib/libc/sys/bfin/Makefile.in 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/sys/bfin/Makefile.in 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,329 @@ ++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ++ ++# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++# This Makefile.in is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without ++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A ++# PARTICULAR PURPOSE. ++ ++ ++SHELL = @SHELL@ ++ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ ++VPATH = @srcdir@ ++prefix = @prefix@ ++exec_prefix = @exec_prefix@ ++ ++bindir = @bindir@ ++sbindir = @sbindir@ ++libexecdir = @libexecdir@ ++datadir = @datadir@ ++sysconfdir = @sysconfdir@ ++sharedstatedir = @sharedstatedir@ ++localstatedir = @localstatedir@ ++libdir = @libdir@ ++infodir = @infodir@ ++mandir = @mandir@ ++includedir = @includedir@ ++oldincludedir = /usr/include ++ ++DESTDIR = ++ ++pkgdatadir = $(datadir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkgincludedir = $(includedir)/@PACKAGE@ ++ ++top_builddir = . ++ ++ACLOCAL = @ACLOCAL@ ++AUTOCONF = @AUTOCONF@ ++AUTOMAKE = @AUTOMAKE@ ++AUTOHEADER = @AUTOHEADER@ ++ ++INSTALL = @INSTALL@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++transform = @program_transform_name@ ++ ++NORMAL_INSTALL = : ++PRE_INSTALL = : ++POST_INSTALL = : ++NORMAL_UNINSTALL = : ++PRE_UNINSTALL = : ++POST_UNINSTALL = : ++build_alias = @build_alias@ ++build_triplet = @build@ ++host_alias = @host_alias@ ++host_triplet = @host@ ++target_alias = @target_alias@ ++target_triplet = @target@ ++AR = @AR@ ++AS = @AS@ ++CC = @CC@ ++CPP = @CPP@ ++EXEEXT = @EXEEXT@ ++LDFLAGS = @LDFLAGS@ ++MAINT = @MAINT@ ++MAKEINFO = @MAKEINFO@ ++NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ ++OBJEXT = @OBJEXT@ ++PACKAGE = @PACKAGE@ ++RANLIB = @RANLIB@ ++VERSION = @VERSION@ ++aext = @aext@ ++libm_machine_dir = @libm_machine_dir@ ++machine_dir = @machine_dir@ ++newlib_basedir = @newlib_basedir@ ++oext = @oext@ ++sys_dir = @sys_dir@ ++ ++AUTOMAKE_OPTIONS = cygnus ++ ++INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) ++ ++noinst_LIBRARIES = lib.a ++ ++lib_a_SOURCES = libcfunc.c syscalls.c ++ ++ACLOCAL_AMFLAGS = -I ../../.. ++CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs ++CONFIG_CLEAN_FILES = ++LIBRARIES = $(noinst_LIBRARIES) ++ ++ ++DEFS = @DEFS@ -I. -I$(srcdir) ++CPPFLAGS = @CPPFLAGS@ ++LIBS = @LIBS@ ++lib_a_LIBADD = ++lib_a_OBJECTS = libcfunc.o syscalls.o ++CFLAGS = @CFLAGS@ ++COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++CCLD = $(CC) ++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ ++DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in ++ ++ ++DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) ++ ++TAR = tar ++GZIP_ENV = --best ++SOURCES = $(lib_a_SOURCES) ++OBJECTS = $(lib_a_OBJECTS) ++ ++all: all-redirect ++.SUFFIXES: ++.SUFFIXES: .S .c .o .s ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) ++ cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile ++ ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ cd $(top_builddir) \ ++ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status ++ ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \ ++ ../../../acinclude.m4 ../../../aclocal.m4 \ ++ ../../../libtool.m4 ++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) ++ ++config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ $(SHELL) ./config.status --recheck ++$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) ++ cd $(srcdir) && $(AUTOCONF) ++ ++mostlyclean-noinstLIBRARIES: ++ ++clean-noinstLIBRARIES: ++ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) ++ ++distclean-noinstLIBRARIES: ++ ++maintainer-clean-noinstLIBRARIES: ++ ++.c.o: ++ $(COMPILE) -c $< ++ ++.s.o: ++ $(COMPILE) -c $< ++ ++.S.o: ++ $(COMPILE) -c $< ++ ++mostlyclean-compile: ++ -rm -f *.o core *.core ++ ++clean-compile: ++ ++distclean-compile: ++ -rm -f *.tab.c ++ ++maintainer-clean-compile: ++ ++lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) ++ -rm -f lib.a ++ $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) ++ $(RANLIB) lib.a ++ ++tags: TAGS ++ ++ID: $(HEADERS) $(SOURCES) $(LISP) ++ list='$(SOURCES) $(HEADERS)'; \ ++ unique=`for i in $$list; do echo $$i; done | \ ++ awk ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ here=`pwd` && cd $(srcdir) \ ++ && mkid -f$$here/ID $$unique $(LISP) ++ ++TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ list='$(SOURCES) $(HEADERS)'; \ ++ unique=`for i in $$list; do echo $$i; done | \ ++ awk ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ ++ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) ++ ++mostlyclean-tags: ++ ++clean-tags: ++ ++distclean-tags: ++ -rm -f TAGS ID ++ ++maintainer-clean-tags: ++ ++distdir = $(PACKAGE)-$(VERSION) ++top_distdir = $(distdir) ++ ++# This target untars the dist file and tries a VPATH configuration. Then ++# it guarantees that the distribution is self-contained by making another ++# tarfile. ++distcheck: dist ++ -rm -rf $(distdir) ++ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz ++ mkdir $(distdir)/=build ++ mkdir $(distdir)/=inst ++ dc_install_base=`cd $(distdir)/=inst && pwd`; \ ++ cd $(distdir)/=build \ ++ && ../configure --srcdir=.. --prefix=$$dc_install_base \ ++ && $(MAKE) $(AM_MAKEFLAGS) \ ++ && $(MAKE) $(AM_MAKEFLAGS) dvi \ ++ && $(MAKE) $(AM_MAKEFLAGS) check \ ++ && $(MAKE) $(AM_MAKEFLAGS) install \ ++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ ++ && $(MAKE) $(AM_MAKEFLAGS) dist ++ -rm -rf $(distdir) ++ @banner="$(distdir).tar.gz is ready for distribution"; \ ++ dashes=`echo "$$banner" | sed s/./=/g`; \ ++ echo "$$dashes"; \ ++ echo "$$banner"; \ ++ echo "$$dashes" ++dist: distdir ++ -chmod -R a+r $(distdir) ++ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) ++ -rm -rf $(distdir) ++dist-all: distdir ++ -chmod -R a+r $(distdir) ++ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) ++ -rm -rf $(distdir) ++distdir: $(DISTFILES) ++ -rm -rf $(distdir) ++ mkdir $(distdir) ++ -chmod 777 $(distdir) ++ @for file in $(DISTFILES); do \ ++ if test -f $$file; then d=.; else d=$(srcdir); fi; \ ++ if test -d $$d/$$file; then \ ++ cp -pr $$d/$$file $(distdir)/$$file; \ ++ else \ ++ test -f $(distdir)/$$file \ ++ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ ++ || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ fi; \ ++ done ++info-am: ++info: info-am ++dvi-am: ++dvi: dvi-am ++check-am: ++check: check-am ++installcheck-am: ++installcheck: installcheck-am ++install-info-am: ++install-info: install-info-am ++install-exec-am: ++install-exec: install-exec-am ++ ++install-data-am: ++install-data: install-data-am ++ ++install-am: all-am ++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am ++install: install-am ++uninstall-am: ++uninstall: uninstall-am ++all-am: Makefile $(LIBRARIES) ++all-redirect: all-am ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install ++installdirs: ++ ++ ++mostlyclean-generic: ++ ++clean-generic: ++ ++distclean-generic: ++ -rm -f Makefile $(CONFIG_CLEAN_FILES) ++ -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ ++maintainer-clean-generic: ++mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ ++ mostlyclean-tags mostlyclean-generic ++ ++mostlyclean: mostlyclean-am ++ ++clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ ++ mostlyclean-am ++ ++clean: clean-am ++ ++distclean-am: distclean-noinstLIBRARIES distclean-compile \ ++ distclean-tags distclean-generic clean-am ++ ++distclean: distclean-am ++ -rm -f config.status ++ ++maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ ++ maintainer-clean-compile maintainer-clean-tags \ ++ maintainer-clean-generic distclean-am ++ @echo "This command is intended for maintainers to use;" ++ @echo "it deletes files that may require special tools to rebuild." ++ ++maintainer-clean: maintainer-clean-am ++ -rm -f config.status ++ ++.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ ++clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ ++mostlyclean-compile distclean-compile clean-compile \ ++maintainer-clean-compile tags mostlyclean-tags distclean-tags \ ++clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ ++check-am installcheck-am installcheck install-info-am install-info \ ++install-exec-am install-exec install-data-am install-data install-am \ ++install uninstall-am uninstall all-redirect all-am all installdirs \ ++mostlyclean-generic distclean-generic clean-generic \ ++maintainer-clean-generic clean mostlyclean distclean maintainer-clean ++ ++ ++all: crt0.o ++ ++# Tell versions [3.59,3.63) of GNU make to not export all variables. ++# Otherwise a system limit (for SysV at least) may be exceeded. ++.NOEXPORT: +diff -urN newlib-1.14.0-orig/newlib/libc/sys/bfin/swi.h newlib-1.14.0/newlib/libc/sys/bfin/swi.h +--- newlib-1.14.0-orig/newlib/libc/sys/bfin/swi.h 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/sys/bfin/swi.h 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,60 @@ ++/* SWI numbers for RDP (Demon) monitor. */ ++#define SWI_WriteC 0x0 ++#define SWI_Write0 0x2 ++#define SWI_ReadC 0x4 ++#define SWI_CLI 0x5 ++#define SWI_GetEnv 0x10 ++#define SWI_Exit 0x11 ++#define SWI_EnterOS 0x16 ++ ++#define SWI_GetErrno 0x60 ++#define SWI_Clock 0x61 ++#define SWI_Time 0x63 ++#define SWI_Remove 0x64 ++#define SWI_Rename 0x65 ++#define SWI_Open 0x66 ++ ++#define SWI_Close 0x68 ++#define SWI_Write 0x69 ++#define SWI_Read 0x6a ++#define SWI_Seek 0x6b ++#define SWI_Flen 0x6c ++ ++#define SWI_IsTTY 0x6e ++#define SWI_TmpNam 0x6f ++#define SWI_InstallHandler 0x70 ++#define SWI_GenerateError 0x71 ++ ++ ++/* Now the SWI numbers and reason codes for RDI (Angel) monitors. */ ++#define AngelSWI_ARM 0x123456 ++#ifdef __thumb__ ++#define AngelSWI 0xAB ++#else ++#define AngelSWI AngelSWI_ARM ++#endif ++ ++/* The reason codes: */ ++#define AngelSWI_Reason_Open 0x01 ++#define AngelSWI_Reason_Close 0x02 ++#define AngelSWI_Reason_WriteC 0x03 ++#define AngelSWI_Reason_Write0 0x04 ++#define AngelSWI_Reason_Write 0x05 ++#define AngelSWI_Reason_Read 0x06 ++#define AngelSWI_Reason_ReadC 0x07 ++#define AngelSWI_Reason_IsTTY 0x09 ++#define AngelSWI_Reason_Seek 0x0A ++#define AngelSWI_Reason_FLen 0x0C ++#define AngelSWI_Reason_TmpNam 0x0D ++#define AngelSWI_Reason_Remove 0x0E ++#define AngelSWI_Reason_Rename 0x0F ++#define AngelSWI_Reason_Clock 0x10 ++#define AngelSWI_Reason_Time 0x11 ++#define AngelSWI_Reason_System 0x12 ++#define AngelSWI_Reason_Errno 0x13 ++#define AngelSWI_Reason_GetCmdLine 0x15 ++#define AngelSWI_Reason_HeapInfo 0x16 ++#define AngelSWI_Reason_EnterSVC 0x17 ++#define AngelSWI_Reason_ReportException 0x18 ++#define ADP_Stopped_ApplicationExit ((2 << 16) + 38) ++#define ADP_Stopped_RunTimeError ((2 << 16) + 35) +diff -urN newlib-1.14.0-orig/newlib/libc/sys/bfin/sys/syscall.h newlib-1.14.0/newlib/libc/sys/bfin/sys/syscall.h +--- newlib-1.14.0-orig/newlib/libc/sys/bfin/sys/syscall.h 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/sys/bfin/sys/syscall.h 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,39 @@ ++#define SYS_exit 1 ++#define SYS_fork 2 ++#define SYS_read 3 ++#define SYS_write 4 ++#define SYS_open 5 ++#define SYS_close 6 ++#define SYS_wait4 7 ++#define SYS_creat 8 ++#define SYS_link 9 ++#define SYS_unlink 10 ++#define SYS_execv 11 ++#define SYS_chdir 12 ++ ++#define SYS_mknod 14 ++#define SYS_chmod 15 ++#define SYS_chown 16 ++ ++#define SYS_lseek 19 ++#define SYS_getpid 20 ++#define SYS_isatty 21 ++#define SYS_fstat 22 ++#define SYS_time 23 ++#define SYS_kill 24 ++ ++#define SYS_stat 38 ++ ++#define SYS_pipe 42 ++ ++#define SYS_execve 59 ++ ++#define SYS_truncate 129 ++#define SYS_ftruncate 130 ++ ++#define SYS_argc 172 ++#define SYS_argnlen 173 ++#define SYS_argn 174 ++ ++#define SYS_utime 201 ++#define SYS_wait 202 +diff -urN newlib-1.14.0-orig/newlib/libc/sys/bfin/syscalls.c newlib-1.14.0/newlib/libc/sys/bfin/syscalls.c +--- newlib-1.14.0-orig/newlib/libc/sys/bfin/syscalls.c 1969-12-31 18:00:00.000000000 -0600 ++++ newlib-1.14.0/newlib/libc/sys/bfin/syscalls.c 2006-08-11 10:51:33.000000000 -0500 +@@ -0,0 +1,540 @@ ++/* Support files for GNU libc. Files in the system namespace go here. ++ Files in the C namespace (ie those that do not start with an ++ underscore) go in .c. */ ++ ++#include <_ansi.h> ++#include <sys/types.h> ++#include <sys/stat.h> ++#include <sys/fcntl.h> ++#include <stdio.h> ++#include <time.h> ++#include <sys/time.h> ++#include <sys/times.h> ++#include "sys/syscall.h" ++#include <errno.h> ++#include <reent.h> ++#include <unistd.h> ++#include "swi.h" ++ ++/* Forward prototypes. */ ++int _system _PARAMS ((const char *)); ++int _rename _PARAMS ((const char *, const char *)); ++int isatty _PARAMS ((int)); ++clock_t _times _PARAMS ((struct tms *)); ++int _gettimeofday _PARAMS ((struct timeval *, struct timezone *)); ++void _raise _PARAMS ((void)); ++int _unlink _PARAMS ((void)); ++int _link _PARAMS ((void)); ++int _stat _PARAMS ((const char *, struct stat *)); ++int _fstat _PARAMS ((int, struct stat *)); ++caddr_t _sbrk _PARAMS ((int)); ++int _getpid _PARAMS ((int)); ++int _kill _PARAMS ((int, int)); ++void _exit _PARAMS ((int)); ++int _close _PARAMS ((int)); ++int _swiclose _PARAMS ((int)); ++int _open _PARAMS ((const char *, int, ...)); ++int _swiopen _PARAMS ((const char *, int)); ++int _write _PARAMS ((int, char *, int)); ++int _swiwrite _PARAMS ((int, char *, int)); ++int _lseek _PARAMS ((int, int, int)); ++int _swilseek _PARAMS ((int, int, int)); ++int _read _PARAMS ((int, char *, int)); ++int _swiread _PARAMS ((int, char *, int)); ++void initialise_monitor_handles _PARAMS ((void)); ++ ++static int wrap _PARAMS ((int)); ++static int error _PARAMS ((int)); ++static int get_errno _PARAMS ((void)); ++static int remap_handle _PARAMS ((int)); ++static int do_AngelSWI _PARAMS ((int, void *)); ++static int findslot _PARAMS ((int)); ++ ++/* Register name faking - works in collusion with the linker. */ ++register char * stack_ptr asm ("SP"); ++ ++ ++/* following is copied from libc/stdio/local.h to check std streams */ ++extern void _EXFUN(__sinit,(struct _reent *)); ++#define CHECK_INIT(fp) \ ++ do \ ++ { \ ++ if ((fp)->_data == 0) \ ++ (fp)->_data = _REENT; \ ++ if (!(fp)->_data->__sdidinit) \ ++ __sinit ((fp)->_data); \ ++ } \ ++ while (0) ++ ++/* Adjust our internal handles to stay away from std* handles. */ ++#define FILE_HANDLE_OFFSET (0x20) ++ ++static int std_files_checked; ++static int monitor_stdin; ++static int monitor_stdout; ++static int monitor_stderr; ++ ++/* Struct used to keep track of the file position, just so we ++ can implement fseek(fh,x,SEEK_CUR). */ ++typedef struct ++{ ++ int handle; ++ int pos; ++} ++poslog; ++ ++#define MAX_OPEN_FILES 20 ++static poslog openfiles [MAX_OPEN_FILES]; ++ ++static int ++findslot (int fh) ++{ ++ int i; ++ for (i = 0; i < MAX_OPEN_FILES; i ++) ++ if (openfiles[i].handle == fh) ++ break; ++ return i; ++} ++ ++static inline int ++do_syscall (int reason, void * arg) ++{ ++ int value = 1; ++ asm volatile ("[--sp] = %1;[--sp] = %2;r1 = [sp++]; r0 = [sp++]; raise 0; %0 = r0" ++ : "=r" (value) /* Outputs */ ++ : "r" (reason), "r" (arg) /* Inputs */ ++ : "R0", "R1", "memory", "cc"); ++ return value; ++} ++ ++/* Function to convert std(in|out|err) handles to internal versions. */ ++static int ++remap_handle (int fh) ++{ ++ if (!std_files_checked) ++ { ++ CHECK_INIT(stdin); ++ CHECK_INIT(stdout); ++ CHECK_INIT(stderr); ++ std_files_checked = 1; ++ } ++ if (fh == STDIN_FILENO) ++ return monitor_stdin; ++ if (fh == STDOUT_FILENO) ++ return monitor_stdout; ++ if (fh == STDERR_FILENO) ++ return monitor_stderr; ++ ++ return fh - FILE_HANDLE_OFFSET; ++} ++ ++void ++initialise_monitor_handles (void) ++{ ++ int i; ++ ++ int volatile block[3]; ++ ++ block[0] = (int) ":tt"; ++ block[2] = 3; /* length of filename */ ++ block[1] = 0; /* mode "r" */ ++ monitor_stdin = do_syscall (SYS_open, (void *) block); ++ ++ block[0] = (int) ":tt"; ++ block[2] = 3; /* length of filename */ ++ block[1] = 4; /* mode "w" */ ++ monitor_stdout = monitor_stderr = do_syscall (SYS_open, (void *) block); ++ ++ for (i = 0; i < MAX_OPEN_FILES; i ++) ++ openfiles[i].handle = -1; ++ ++ openfiles[0].handle = monitor_stdin; ++ openfiles[0].pos = 0; ++ openfiles[1].handle = monitor_stdout; ++ openfiles[1].pos = 0; ++} ++ ++static int ++get_errno (void) ++{ ++ return 0 /*do_syscall (SYS_errno, NULL) */; ++} ++ ++static int ++error (int result) ++{ ++ errno = get_errno (); ++ return result; ++} ++ ++static int ++wrap (int result) ++{ ++ if (result == -1) ++ return error (-1); ++ return result; ++} ++ ++/* Returns # chars not! written. */ ++int ++_swiread (int file, ++ char * ptr, ++ int len) ++{ ++ int fh = remap_handle (file); ++ int block[3]; ++ ++ block[0] = fh; ++ block[1] = (int) ptr; ++ block[2] = len; ++ ++ return do_syscall (SYS_read, block); ++} ++ ++int ++_read (int file, ++ char * ptr, ++ int len) ++{ ++ int slot = findslot (remap_handle (file)); ++ int x = _swiread (file, ptr, len); ++ ++ if (x < 0) ++ return error (-1); ++ ++ if (slot != MAX_OPEN_FILES) ++ openfiles [slot].pos += x; ++ ++ /* x == len is not an error, at least if we want feof() to work. */ ++ return x; ++} ++ ++int ++_swilseek (int file, ++ int ptr, ++ int dir) ++{ ++ int res; ++ int fh = remap_handle (file); ++ int slot = findslot (fh); ++ int block[2]; ++ ++ if (dir == SEEK_CUR) ++ { ++ if (slot == MAX_OPEN_FILES) ++ return -1; ++ ptr = openfiles[slot].pos + ptr; ++ dir = SEEK_SET; ++ } ++ ++ if (dir == SEEK_END) ++ { ++ block[0] = fh; ++ ptr += do_syscall (AngelSWI_Reason_FLen, block); ++ } ++ ++ /* This code only does absolute seeks. */ ++ block[0] = remap_handle (file); ++ block[1] = ptr; ++ res = do_syscall (AngelSWI_Reason_Seek, block); ++ ++ if (slot != MAX_OPEN_FILES && res == 0) ++ openfiles[slot].pos = ptr; ++ ++ /* This is expected to return the position in the file. */ ++ return res == 0 ? ptr : -1; ++} ++ ++int ++_lseek (int file, ++ int ptr, ++ int dir) ++{ ++ return wrap (_swilseek (file, ptr, dir)); ++} ++ ++/* Returns #chars not! written. */ ++int ++_swiwrite ( ++ int file, ++ char * ptr, ++ int len) ++{ ++ int fh = remap_handle (file); ++ int block[3]; ++ ++ block[0] = fh; ++ block[1] = (int) ptr; ++ block[2] = len; ++ ++ return do_syscall (SYS_write, block); ++} ++ ++int ++_write (int file, ++ char * ptr, ++ int len) ++{ ++ int slot = findslot (remap_handle (file)); ++ int x = _swiwrite (file, ptr,len); ++ ++ if (x < 0) ++ return error (-1); ++ ++ if (slot != MAX_OPEN_FILES) ++ openfiles[slot].pos += x; ++ ++ return x; ++} ++ ++extern int strlen (const char *); ++ ++int ++_swiopen (const char * path, ++ int flags) ++{ ++ int aflags = 0, fh; ++ int block[3]; ++ ++ int i = findslot (-1); ++ ++ if (i == MAX_OPEN_FILES) ++ return -1; ++ ++ block[0] = (int) path; ++ block[1] = flags; ++ ++ fh = do_syscall (SYS_open, block); ++ ++ if (fh >= 0) ++ { ++ openfiles[i].handle = fh; ++ openfiles[i].pos = 0; ++ } ++ ++ return fh >= 0 ? fh + FILE_HANDLE_OFFSET : error (fh); ++} ++ ++int ++_open (const char * path, ++ int flags, ++ ...) ++{ ++ return wrap (_swiopen (path, flags)); ++} ++ ++int ++_swiclose (int file) ++{ ++ int myhan = remap_handle (file); ++ int slot = findslot (myhan); ++ ++ if (slot != MAX_OPEN_FILES) ++ openfiles[slot].handle = -1; ++ ++ return do_syscall (SYS_close, & myhan); ++} ++ ++int ++_close (int file) ++{ ++ return wrap (_swiclose (file)); ++} ++ ++void ++_exit (int n) ++{ ++ /* FIXME: return code is thrown away. */ ++ ++ do_syscall (SYS_exit, (void *) &n); ++} ++ ++int ++_kill (int n, int m) ++{ ++ int block[2]; ++ block[0] = n; ++ block[1] = m; ++ return do_syscall (SYS_kill, block); ++} ++ ++int ++_getpid (int n) ++{ ++ return 1; ++ n = n; ++} ++ ++caddr_t ++_sbrk (int incr) ++{ ++ extern char end; /* Defined by the linker. */ ++ static char * heap_end; ++ char * prev_heap_end; ++ ++ if (heap_end == NULL) ++ heap_end = & end; ++ ++ prev_heap_end = heap_end; ++ ++ if (heap_end + incr > stack_ptr) ++ { ++ /* Some of the libstdc++-v3 tests rely upon detecting ++ out of memory errors, so do not abort here. */ ++#if 0 ++ extern void abort (void); ++ ++ _write (1, "_sbrk: Heap and stack collision\n", 32); ++ ++ abort (); ++#else ++ errno = ENOMEM; ++ return (caddr_t) -1; ++#endif ++ } ++ ++ heap_end += incr; ++ ++ return (caddr_t) prev_heap_end; ++} ++ ++extern void memset (struct stat *, int, unsigned int); ++ ++int ++_fstat (int file, struct stat * st) ++{ ++ memset (st, 0, sizeof (* st)); ++ st->st_mode = S_IFCHR; ++ st->st_blksize = 1024; ++ return 0; ++ file = file; ++} ++ ++int _stat (const char *fname, struct stat *st) ++{ ++ int file; ++ ++ /* The best we can do is try to open the file readonly. If it exists, ++ then we can guess a few things about it. */ ++ if ((file = _open (fname, O_RDONLY)) < 0) ++ return -1; ++ ++ memset (st, 0, sizeof (* st)); ++ st->st_mode = S_IFREG | S_IREAD; ++ st->st_blksize = 1024; ++ _swiclose (file); /* Not interested in the error. */ ++ return 0; ++} ++ ++int ++_link (void) ++{ ++ return -1; ++} ++ ++int ++_unlink (void) ++{ ++ return -1; ++} ++ ++void ++_raise (void) ++{ ++ return; ++} ++ ++int ++_gettimeofday (struct timeval * tp, struct timezone * tzp) ++{ ++ ++ if (tp) ++ { ++ /* Ask the host for the seconds since the Unix epoch. */ ++ tp->tv_sec = do_syscall (AngelSWI_Reason_Time,NULL); ++ tp->tv_usec = 0; ++ } ++ ++ /* Return fixed data for the timezone. */ ++ if (tzp) ++ { ++ tzp->tz_minuteswest = 0; ++ tzp->tz_dsttime = 0; ++ } ++ ++ return 0; ++} ++ ++/* Return a clock that ticks at 100Hz. */ ++clock_t ++_times (struct tms * tp) ++{ ++ clock_t timeval; ++ ++ timeval = do_syscall (AngelSWI_Reason_Clock,NULL); ++ ++ if (tp) ++ { ++ tp->tms_utime = timeval; /* user time */ ++ tp->tms_stime = 0; /* system time */ ++ tp->tms_cutime = 0; /* user time, children */ ++ tp->tms_cstime = 0; /* system time, children */ ++ } ++ ++ return timeval; ++}; ++ ++ ++int ++isatty (int fd) ++{ ++ return 1; ++ fd = fd; ++} ++ ++int ++_system (const char *s) ++{ ++ if (s == NULL) ++ return 0; ++ errno = ENOSYS; ++ return -1; ++} ++ ++int ++_rename (const char * oldpath, const char * newpath) ++{ ++ errno = ENOSYS; ++ return -1; ++} ++ ++static inline int ++__setup_argv_for_main (int argc) ++{ ++ int block[2]; ++ char **argv; ++ int i = argc; ++ ++ argv = __builtin_alloca ((1 + argc) * sizeof (*argv)); ++ ++ argv[i] = NULL; ++ while (i--) { ++ block[0] = i; ++ argv[i] = __builtin_alloca (1 + do_syscall (SYS_argnlen, (void *)block)); ++ block[1] = argv[i]; ++ do_syscall (SYS_argn, (void *)block); ++ } ++ ++ return main (argc, argv); ++} ++ ++int ++__setup_argv_and_call_main () ++{ ++ int argc = do_syscall (SYS_argc, 0); ++ ++ if (argc <= 0) ++ return main (argc, NULL); ++ else ++ return __setup_argv_for_main (argc); ++} |