diff options
Diffstat (limited to 'c/src/tests/samples')
-rw-r--r-- | c/src/tests/samples/aclocal.m4 | 700 | ||||
-rw-r--r-- | c/src/tests/samples/configure | 139 |
2 files changed, 469 insertions, 370 deletions
diff --git a/c/src/tests/samples/aclocal.m4 b/c/src/tests/samples/aclocal.m4 index 122fb09797..8a7da1dee6 100644 --- a/c/src/tests/samples/aclocal.m4 +++ b/c/src/tests/samples/aclocal.m4 @@ -19,6 +19,9 @@ dnl $1 .. relative path from this configure.in to the toplevel configure.in dnl AC_DEFUN(RTEMS_TOP, [dnl +AC_BEFORE([$0], [AC_CONFIG_AUX_DIR])dnl +AC_BEFORE([$0], [AM_INIT_AUTOMAKE])dnl + AC_ARG_WITH(target-subdir, [ --with-target-subdir=DIR], TARGET_SUBDIR="$withval", @@ -44,47 +47,6 @@ fi AC_MSG_RESULT($RTEMS_VERSION) ])dnl -dnl -dnl $Id$ -dnl - -dnl canonicalize target cpu -dnl NOTE: Most rtems targets do not fullfil autoconf's -dnl target naming conventions "processor-vendor-os" -dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them -dnl and we have to fix it for rtems ourselves - -AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU, -[ -AC_CANONICAL_SYSTEM -AC_MSG_CHECKING(rtems target cpu) -changequote(,)dnl -case "${target}" in - # hpux unix port should go here - i[3456]86-go32-rtems*) - RTEMS_CPU=i386 - ;; - i[3456]86-pc-linux*) # unix "simulator" port - RTEMS_CPU=unix - ;; - i[3456]86-*freebsd2*) # unix "simulator" port - RTEMS_CPU=unix - ;; - no_cpu-*rtems*) - RTEMS_CPU=no_cpu - ;; - sparc-sun-solaris*) # unix "simulator" port - RTEMS_CPU=unix - ;; - *) - RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` - ;; -esac -changequote([,])dnl -AC_SUBST(RTEMS_CPU) -AC_MSG_RESULT($RTEMS_CPU) -]) - # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. @@ -179,6 +141,47 @@ else fi AC_SUBST($1)]) +dnl +dnl $Id$ +dnl + +dnl canonicalize target cpu +dnl NOTE: Most rtems targets do not fullfil autoconf's +dnl target naming conventions "processor-vendor-os" +dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them +dnl and we have to fix it for rtems ourselves + +AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU, +[ +AC_CANONICAL_SYSTEM +AC_MSG_CHECKING(rtems target cpu) +changequote(,)dnl +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) + RTEMS_CPU=i386 + ;; + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_CPU=unix + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_CPU=unix + ;; + no_cpu-*rtems*) + RTEMS_CPU=no_cpu + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_CPU=unix + ;; + *) + RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` + ;; +esac +changequote([,])dnl +AC_SUBST(RTEMS_CPU) +AC_MSG_RESULT($RTEMS_CPU) +]) + # Add --enable-maintainer-mode option to configure. # From Jim Meyering @@ -230,6 +233,8 @@ dnl $Id$ AC_DEFUN(RTEMS_ENABLE_POSIX, [ +AC_BEFORE([$0], [RTEMS_CHECK_POSIX_API])dnl + AC_ARG_ENABLE(posix, [ --enable-posix enable posix interface], [case "${enableval}" in @@ -265,9 +270,60 @@ AC_SUBST(RTEMS_HAS_POSIX_API) ]) dnl $Id$ +dnl +AC_DEFUN(RTEMS_CHECK_POSIX_API, +[dnl +AC_REQUIRE([RTEMS_CHECK_CPU])dnl +AC_REQUIRE([RTEMS_ENABLE_POSIX])dnl + +AC_CACHE_CHECK([whether BSP supports libposix], + rtems_cv_HAS_POSIX_API, + [dnl + case "$RTEMS_CPU" in + unix*) + rtems_cv_HAS_POSIX_API="no" + ;; + *) + if test "${RTEMS_HAS_POSIX_API}" = "yes"; then + rtems_cv_HAS_POSIX_API="yes"; + else + rtems_cv_HAS_POSIX_API="disabled"; + fi + ;; + esac]) +if test "$rtems_cv_HAS_POSIX_API" = "yes"; then + HAS_POSIX_API="yes"; +else + HAS_POSIX_API="no"; +fi +AC_SUBST(HAS_POSIX_API)dnl +]) + +dnl $Id$ + +dnl check if RTEMS support a cpu +AC_DEFUN(RTEMS_CHECK_CPU, +[dnl +AC_REQUIRE([RTEMS_TOP]) +AC_REQUIRE([RTEMS_CANONICAL_TARGET_CPU]) +AC_BEFORE([$0], [RTEMS_CHECK_POSIX_API])dnl + +# Is this a supported CPU? +AC_MSG_CHECKING([if cpu $RTEMS_CPU is supported]) +if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then + AC_MSG_RESULT(yes) +else + AC_MSG_ERROR(no) +fi +])dnl + + +dnl $Id$ AC_DEFUN(RTEMS_ENABLE_NETWORKING, [ +AC_BEFORE([$0], [RTEMS_CHECK_NETWORKING])dnl + AC_ARG_ENABLE(networking, [ --enable-networking enable TCP/IP stack], [case "${enableval}" in @@ -279,6 +335,74 @@ AC_SUBST(RTEMS_HAS_NETWORKING)dnl ]) dnl $Id$ +dnl +AC_DEFUN(RTEMS_CHECK_NETWORKING, +[dnl +AC_REQUIRE([RTEMS_CHECK_CPU])dnl +AC_REQUIRE([RTEMS_ENABLE_NETWORKING])dnl +AC_BEFORE([$0], [RTEMS_CHECK_RDBG])dnl + +AC_CACHE_CHECK([whether BSP supports networking], + rtems_cv_HAS_NETWORKING, + [dnl + case "$RTEMS_CPU" in + unix*) + rtems_cv_HAS_NETWORKING="no" + ;; + *) + if test "${RTEMS_HAS_NETWORKING}" = "yes"; then + rtems_cv_HAS_NETWORKING="yes"; + else + rtems_cv_HAS_NETWORKING="disabled"; + fi + ;; + esac]) +if test "$rtems_cv_HAS_NETWORKING" = "yes"; then + HAS_NETWORKING="yes"; +else + HAS_NETWORKING="no"; +fi +AC_SUBST(HAS_NETWORKING)dnl +]) + +dnl $Id$ +dnl +AC_DEFUN(RTEMS_CHECK_RDBG, +[dnl +AC_REQUIRE([RTEMS_TOP])dnl +AC_REQUIRE([RTEMS_CHECK_CPU])dnl +AC_REQUIRE([RTEMS_CHECK_NETWORKING])dnl +AC_REQUIRE([RTEMS_ENABLE_RDBG])dnl +AC_CACHE_CHECK([whether BSP supports librdbg], + rtems_cv_HAS_RDBG, + [ + if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/librdbg/${RTEMS_CPU}/${$1}"; then + rtems_cv_HAS_RDBG="yes" ; + else + rtems_cv_HAS_RDBG="no"; + fi + ]) +HAS_RDBG="$rtems_cv_HAS_RDBG" +AC_SUBST(HAS_RDBG) +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_RDBG, +[ +AC_BEFORE([$0], [RTEMS_CHECK_RDBG])dnl + +AC_ARG_ENABLE(rdbg, +[ --enable-rdbg enable remote debugger], +[case "${enableval}" in + yes) RTEMS_HAS_RDBG=yes ;; + no) RTEMS_HAS_RDBG=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-rdbg option) ;; +esac],[RTEMS_HAS_RDBG=no]) +AC_SUBST(RTEMS_HAS_RDBG)dnl +]) + +dnl $Id$ AC_DEFUN(RTEMS_ENABLE_INLINES, [AC_ARG_ENABLE(rtems-inlines, @@ -359,6 +483,7 @@ dnl used by the toplevel configure script dnl RTEMS_ENABLE_RTEMSBSP(rtems_bsp_list) AC_DEFUN(RTEMS_ENABLE_RTEMSBSP, [ +AC_BEFORE([$0], [RTEMS_ENV_RTEMSBSP])dnl AC_ARG_ENABLE(rtemsbsp, [ --enable-rtemsbsp=bsp1 bsp2 .. BSPs to include in build], [case "${enableval}" in @@ -371,6 +496,12 @@ dnl Pass a single BSP via an environment variable dnl used by per BSP configure scripts AC_DEFUN(RTEMS_ENV_RTEMSBSP, [dnl +AC_BEFORE([$0], [RTEMS_ENABLE_RTEMSBSP])dnl +AC_BEFORE([$0], [RTEMS_PROJECT_ROOT])dnl +AC_BEFORE([$0], [RTEMS_CHECK_CUSTOM_BSP])dnl +AC_BEFORE([$0], [RTEMS_CHECK_MULTIPROCESSING])dnl +AC_BEFORE([$0], [RTEMS_CHECK_POSIX_API])dnl + AC_MSG_CHECKING([for RTEMS_BSP]) AC_CACHE_VAL(rtems_cv_RTEMS_BSP, [dnl @@ -384,22 +515,111 @@ AC_MSG_RESULT(${RTEMS_BSP}) AC_SUBST(RTEMS_BSP) ]) +dnl dnl $Id$ +dnl -dnl check if RTEMS support a cpu -AC_DEFUN(RTEMS_CHECK_CPU, +AC_DEFUN(RTEMS_PROJECT_ROOT, [dnl AC_REQUIRE([RTEMS_TOP]) -AC_REQUIRE([RTEMS_CANONICAL_TARGET_CPU]) -# Is this a supported CPU? -AC_MSG_CHECKING([if cpu $RTEMS_CPU is supported]) -if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then - AC_MSG_RESULT(yes) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; else - AC_MSG_ERROR(no) +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +dnl $Id$ + +dnl Report all available bsps for a target, +dnl check if a bsp-subdirectory is present for all bsps found +dnl +dnl RTEMS_CHECK_BSPS(bsp_list) +AC_DEFUN(RTEMS_CHECK_BSPS, +[ +AC_REQUIRE([RTEMS_CHECK_CPU])dnl sets RTEMS_CPU, target +AC_REQUIRE([RTEMS_TOP])dnl sets RTEMS_TOPdir +AC_MSG_CHECKING([for bsps]) +case "${target}" in +changequote(,)dnl + i[3456]86-go32-rtems*) +changequote([,])dnl + $1="go32 go32_p5" + ;; + *) + files=`ls $srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$RTEMS_CPU` + for file in $files; do + case $file in + shared*);; + Makefile*);; + READ*);; + CVS*);; + pxfl*);; + go32*);; # so the i386 port can pick up the other Makefiles + # Now account for BSPs with build variants + gen68360) rtems_bsp="$rtems_bsp gen68360 gen68360_040";; + p4000) rtems_bsp="$rtems_bsp p4600 p4650";; + mvme162) rtems_bsp="$rtems_bsp mvme162 mvme162lx";; + *) $1="[$]$1 $file";; + esac; + done + ;; +esac +AC_MSG_RESULT([[$]$1 .. done]) +])dnl + +AC_DEFUN(RTEMS_CHECK_CUSTOM_BSP, +[dnl +AC_REQUIRE([RTEMS_TOP]) + +AC_MSG_CHECKING([for make/custom/[$]$1.cfg]) +if test -r "$srcdir/$RTEMS_TOPdir/make/custom/[$]$1.cfg"; then + AC_MSG_RESULT([yes]) +else + AC_MSG_ERROR([no]) fi ])dnl +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING, +[dnl +AC_REQUIRE([RTEMS_TOP])dnl +AC_REQUIRE([RTEMS_CHECK_CPU])dnl +AC_REQUIRE([RTEMS_ENABLE_MULTIPROCESSING])dnl + +AC_CACHE_CHECK([whether BSP supports multiprocessing], + rtems_cv_HAS_MP, + [dnl + if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/libbsp/${RTEMS_CPU}/${$1}/shmsupp"; then + if test "$RTEMS_HAS_MULTIPROCESSING" = "yes"; then + rtems_cv_HAS_MP="yes" ; + else + rtems_cv_HAS_MP="disabled"; + fi + else + rtems_cv_HAS_MP="no"; + fi]) +if test "$rtems_cv_HAS_MP" = "yes"; then +HAS_MP="yes" +else +HAS_MP="no" +fi +AC_SUBST(HAS_MP) +]) dnl $Id$ @@ -429,31 +649,6 @@ AC_SUBST(RTEMS_HOST) dnl dnl $Id$ dnl - -AC_DEFUN(RTEMS_PROJECT_ROOT, -[dnl -AC_REQUIRE([RTEMS_TOP]) -if test "$TARGET_SUBDIR" = "." ; then -PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; -else -PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' -fi -AC_SUBST(PROJECT_ROOT) - -RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP -AC_SUBST(RTEMS_ROOT) - -INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" -AC_SUBST(INSTALL_CHANGE) - -PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" -AC_SUBST(PACKHEX) -]) - - -dnl -dnl $Id$ -dnl dnl Check for target gcc dnl dnl 98/05/20 Ralf Corsepius (corsepiu@faw.uni-ulm.de) @@ -463,6 +658,7 @@ AC_DEFUN(RTEMS_PROG_CC, [ AC_BEFORE([$0], [AC_PROG_CPP])dnl AC_BEFORE([$0], [AC_PROG_CC])dnl +AC_BEFORE([$0], [RTEMS_CANONICALIZE_TOOLS])dnl AC_REQUIRE([RTEMS_TOOL_PREFIX])dnl dnl Only accept gcc and cc @@ -543,6 +739,130 @@ AC_SUBST(GCCSED) ]) dnl +dnl $Id$ +dnl +dnl Set target tools +dnl +dnl 98/06/23 Ralf Corsepius (corsepiu@faw.uni-ulm.de) +dnl fixing cache/environment variable handling +dnl adding checks for cygwin/egcs '\\'-bug +dnl adding checks for ranlib/ar -s problem +dnl +dnl 98/02/12 Ralf Corsepius (corsepiu@faw.uni-ulm.de) +dnl + +AC_DEFUN(RTEMS_GCC_PRINT, +[ case $host_os in + *cygwin*) + dnl FIXME: Hack for cygwin/egcs reporting mixed '\\' and '/' + dnl Should be removed once cygwin/egcs reports '/' only + $1=`$CC_FOR_TARGET --print-prog-name=$2 | sed -e 's%\\\\%/%g' ` + ;; + *) + $1=`$CC_FOR_TARGET --print-prog-name=$2` + ;; + esac +]) + +AC_DEFUN(RTEMS_PATH_TOOL, +[ +AC_MSG_CHECKING([target's $2]) +AC_CACHE_VAL(ac_cv_path_$1,:) +AC_MSG_RESULT([$ac_cv_path_$1]) + +if test -n "$ac_cv_path_$1"; then + dnl retrieve the value from the cache + $1=$ac_cv_path_$1 +else + dnl the cache was not set + if test -z "[$]$1" ; then + if test "$rtems_cv_prog_gcc" = "yes"; then + # We are using gcc, ask it about its tool + # NOTE: Necessary if gcc was configured to use the target's + # native tools or uses prefixes for gnutools (e.g. gas instead of as) + RTEMS_GCC_PRINT($1,$2) + fi + else + # The user set an environment variable. + # Check whether it is an absolute path, otherwise AC_PATH_PROG + # will override the environment variable, which isn't what the user + # intends + AC_MSG_CHECKING([whether environment variable $1 is an absolute path]) + case "[$]$1" in + /*) # valid + AC_MSG_RESULT("yes") + ;; + *) # invalid for AC_PATH_PROG + AC_MSG_RESULT("no") + AC_MSG_ERROR([***] + [Environment variable $1 should either] + [be unset (preferred) or contain an absolute path]) + ;; + esac + fi + + AC_PATH_PROG($1,"$program_prefix"$2,$3) +fi +]) + +AC_DEFUN(RTEMS_CANONICALIZE_TOOLS, +[AC_REQUIRE([RTEMS_PROG_CC])dnl + +dnl FIXME: What shall be done if these tools are not available? + RTEMS_PATH_TOOL(AR_FOR_TARGET,ar,no) + RTEMS_PATH_TOOL(AS_FOR_TARGET,as,no) + RTEMS_PATH_TOOL(LD_FOR_TARGET,ld,no) + RTEMS_PATH_TOOL(NM_FOR_TARGET,nm,no) + +dnl special treatment of ranlib + RTEMS_PATH_TOOL(RANLIB_FOR_TARGET,ranlib,no) + if test "$RANLIB_FOR_TARGET" = "no"; then + # ranlib wasn't found; check if ar -s is available + RTEMS_AR_FOR_TARGET_S + if test $rtems_cv_AR_FOR_TARGET_S = "yes" ; then + dnl override RANLIB_FOR_TARGET's cache + ac_cv_path_RANLIB_FOR_TARGET="$AR_FOR_TARGET -s" + RANLIB_FOR_TARGET=$ac_cv_path_RANLIB_FOR_TARGET + else + AC_MSG_ERROR([***] + [Can't figure out how to build a library index] + [Neither ranlib nor ar -s seem to be available] ) + fi + fi + +dnl NOTE: These may not be available if not using gnutools + RTEMS_PATH_TOOL(OBJCOPY_FOR_TARGET,objcopy,no) + RTEMS_PATH_TOOL(SIZE_FOR_TARGET,size,no) + RTEMS_PATH_TOOL(STRIP_FOR_TARGET,strip,no) +]) + +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_AR_FOR_TARGET_S, +[ +AC_CACHE_CHECK(whether $AR_FOR_TARGET -s works, +rtems_cv_AR_FOR_TARGET_S, +[ +cat > conftest.$ac_ext <<EOF +int foo( int b ) +{ return b; } +EOF +if AC_TRY_COMMAND($CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext) \ + && AC_TRY_COMMAND($AR_FOR_TARGET -sr conftest.a conftest.o) \ + && test -s conftest.a ; \ +then + rtems_cv_AR_FOR_TARGET_S="yes" +else + rtems_cv_AR_FOR_TARGET_S="no" +fi + rm -f conftest* +]) +]) + + +dnl dnl $Id$ dnl dnl Set program_prefix @@ -570,8 +890,6 @@ dnl $Id$ dnl dnl Check whether the target compiler accepts -specs dnl -dnl 98/02/11 Ralf Corsepius corsepiu@faw.uni-ulm.de -dnl AC_DEFUN(RTEMS_GCC_SPECS, [AC_REQUIRE([RTEMS_PROG_CC]) @@ -630,6 +948,7 @@ AC_DEFUN(RTEMS_PROG_CXX, [ AC_BEFORE([$0], [AC_PROG_CXXCPP])dnl AC_BEFORE([$0], [AC_PROG_CXX])dnl +AC_BEFORE([$0], [RTEMS_CANONICALIZE_TOOLS])dnl AC_REQUIRE([RTEMS_TOOL_PREFIX])dnl dnl Only accept g++ and c++ @@ -696,235 +1015,6 @@ AC_DEFUN(RTEMS_PROG_CXX_FOR_TARGET, fi ]) -dnl -dnl $Id$ -dnl -dnl Set target tools -dnl -dnl 98/06/23 Ralf Corsepius (corsepiu@faw.uni-ulm.de) -dnl fixing cache/environment variable handling -dnl adding checks for cygwin/egcs '\\'-bug -dnl adding checks for ranlib/ar -s problem -dnl -dnl 98/02/12 Ralf Corsepius (corsepiu@faw.uni-ulm.de) -dnl - -AC_DEFUN(RTEMS_GCC_PRINT, -[ case $host_os in - *cygwin*) - dnl FIXME: Hack for cygwin/egcs reporting mixed '\\' and '/' - dnl Should be removed once cygwin/egcs reports '/' only - $1=`$CC_FOR_TARGET --print-prog-name=$2 | sed -e 's%\\\\%/%g' ` - ;; - *) - $1=`$CC_FOR_TARGET --print-prog-name=$2` - ;; - esac -]) - -AC_DEFUN(RTEMS_PATH_TOOL, -[ -AC_MSG_CHECKING([target's $2]) -AC_CACHE_VAL(ac_cv_path_$1,:) -AC_MSG_RESULT([$ac_cv_path_$1]) - -if test -n "$ac_cv_path_$1"; then - dnl retrieve the value from the cache - $1=$ac_cv_path_$1 -else - dnl the cache was not set - if test -z "[$]$1" ; then - if test "$rtems_cv_prog_gcc" = "yes"; then - # We are using gcc, ask it about its tool - # NOTE: Necessary if gcc was configured to use the target's - # native tools or uses prefixes for gnutools (e.g. gas instead of as) - RTEMS_GCC_PRINT($1,$2) - fi - else - # The user set an environment variable. - # Check whether it is an absolute path, otherwise AC_PATH_PROG - # will override the environment variable, which isn't what the user - # intends - AC_MSG_CHECKING([whether environment variable $1 is an absolute path]) - case "[$]$1" in - /*) # valid - AC_MSG_RESULT("yes") - ;; - *) # invalid for AC_PATH_PROG - AC_MSG_RESULT("no") - AC_MSG_ERROR([***] - [Environment variable $1 should either] - [be unset (preferred) or contain an absolute path]) - ;; - esac - fi - - AC_PATH_PROG($1,"$program_prefix"$2,$3) -fi -]) - -AC_DEFUN(RTEMS_CANONICALIZE_TOOLS, -[AC_REQUIRE([RTEMS_PROG_CC])dnl - -dnl FIXME: What shall be done if these tools are not available? - RTEMS_PATH_TOOL(AR_FOR_TARGET,ar,no) - RTEMS_PATH_TOOL(AS_FOR_TARGET,as,no) - RTEMS_PATH_TOOL(LD_FOR_TARGET,ld,no) - RTEMS_PATH_TOOL(NM_FOR_TARGET,nm,no) - -dnl special treatment of ranlib - RTEMS_PATH_TOOL(RANLIB_FOR_TARGET,ranlib,no) - if test "$RANLIB_FOR_TARGET" = "no"; then - # ranlib wasn't found; check if ar -s is available - RTEMS_AR_FOR_TARGET_S - if test $rtems_cv_AR_FOR_TARGET_S = "yes" ; then - dnl override RANLIB_FOR_TARGET's cache - ac_cv_path_RANLIB_FOR_TARGET="$AR_FOR_TARGET -s" - RANLIB_FOR_TARGET=$ac_cv_path_RANLIB_FOR_TARGET - else - AC_MSG_ERROR([***] - [Can't figure out how to build a library index] - [Neither ranlib nor ar -s seem to be available] ) - fi - fi - -dnl NOTE: These may not be available if not using gnutools - RTEMS_PATH_TOOL(OBJCOPY_FOR_TARGET,objcopy,no) - RTEMS_PATH_TOOL(SIZE_FOR_TARGET,size,no) - RTEMS_PATH_TOOL(STRIP_FOR_TARGET,strip,no) -]) - -dnl -dnl $Id$ -dnl - -AC_DEFUN(RTEMS_AR_FOR_TARGET_S, -[ -AC_CACHE_CHECK(whether $AR_FOR_TARGET -s works, -rtems_cv_AR_FOR_TARGET_S, -[ -cat > conftest.$ac_ext <<EOF -int foo( int b ) -{ return b; } -EOF -if AC_TRY_COMMAND($CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext) \ - && AC_TRY_COMMAND($AR_FOR_TARGET -sr conftest.a conftest.o) \ - && test -s conftest.a ; \ -then - rtems_cv_AR_FOR_TARGET_S="yes" -else - rtems_cv_AR_FOR_TARGET_S="no" -fi - rm -f conftest* -]) -]) - - -dnl $Id$ - -dnl Report all available bsps for a target, -dnl check if a bsp-subdirectory is present for all bsps found -dnl -dnl RTEMS_CHECK_BSPS(bsp_list) -AC_DEFUN(RTEMS_CHECK_BSPS, -[ -AC_REQUIRE([RTEMS_CHECK_CPU])dnl sets RTEMS_CPU, target -AC_REQUIRE([RTEMS_TOP])dnl sets RTEMS_TOPdir -AC_MSG_CHECKING([for bsps]) -case "${target}" in -changequote(,)dnl - i[3456]86-go32-rtems*) -changequote([,])dnl - $1="go32 go32_p5" - ;; - *) - files=`ls $srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$RTEMS_CPU` - for file in $files; do - case $file in - shared*);; - Makefile*);; - READ*);; - CVS*);; - pxfl*);; - go32*);; # so the i386 port can pick up the other Makefiles - # Now account for BSPs with build variants - gen68360) rtems_bsp="$rtems_bsp gen68360 gen68360_040";; - p4000) rtems_bsp="$rtems_bsp p4600 p4650";; - mvme162) rtems_bsp="$rtems_bsp mvme162 mvme162lx";; - *) $1="[$]$1 $file";; - esac; - done - ;; -esac -AC_MSG_RESULT([[$]$1 .. done]) -])dnl - -AC_DEFUN(RTEMS_CHECK_CUSTOM_BSP, -[dnl -AC_MSG_CHECKING([for make/custom/[$]$1.cfg]) -if test -r "$srcdir/$RTEMS_TOPdir/make/custom/[$]$1.cfg"; then - AC_MSG_RESULT([yes]) -else - AC_MSG_ERROR([no]) -fi -])dnl - -dnl -dnl $Id$ -dnl - -AC_DEFUN(RTEMS_CHECK_MULTIPROCESSING, -[dnl -AC_REQUIRE([RTEMS_TOP])dnl -AC_REQUIRE([RTEMS_CHECK_CPU])dnl -AC_CACHE_CHECK([whether BSP supports multiprocessing], - rtems_cv_HAS_MP, - [dnl - if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/libbsp/${RTEMS_CPU}/${$1}/shmsupp"; then - if test "$RTEMS_HAS_MULTIPROCESSING" = "yes"; then - rtems_cv_HAS_MP="yes" ; - else - rtems_cv_HAS_MP="disabled"; - fi - else - rtems_cv_HAS_MP="no"; - fi]) -if test "$rtems_cv_HAS_MP" = "yes"; then -HAS_MP="yes" -else -HAS_MP="no" -fi -AC_SUBST(HAS_MP) -]) - -dnl $Id$ -dnl -AC_DEFUN(RTEMS_CHECK_POSIX_API, -[dnl -AC_REQUIRE([RTEMS_CHECK_CPU])dnl -AC_CACHE_CHECK([whether BSP supports libposix], - rtems_cv_HAS_POSIX_API, - [dnl - case "$RTEMS_CPU" in - unix*) - rtems_cv_HAS_POSIX_API="no" - ;; - *) - if test "${RTEMS_HAS_POSIX_API}" = "yes"; then - rtems_cv_HAS_POSIX_API="yes"; - else - rtems_cv_HAS_POSIX_API="disabled"; - fi - ;; - esac]) -if test "$rtems_cv_HAS_POSIX_API" = "yes"; then - HAS_POSIX_API="yes"; -else - HAS_POSIX_API="no"; -fi -AC_SUBST(HAS_POSIX_API)dnl -]) - dnl $Id$ dnl AC_DEFUN(RTEMS_CHECK_CXX, diff --git a/c/src/tests/samples/configure b/c/src/tests/samples/configure index 8defcab12f..b508da50e1 100644 --- a/c/src/tests/samples/configure +++ b/c/src/tests/samples/configure @@ -548,6 +548,7 @@ else fi + # Check whether --with-target-subdir or --without-target-subdir was given. if test "${with_target_subdir+set}" = set; then withval="$with_target_subdir" @@ -561,7 +562,7 @@ RTEMS_TOPdir="../../../.."; echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:565: checking for RTEMS Version" >&5 +echo "configure:566: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -622,7 +623,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:626: checking host system type" >&5 +echo "configure:627: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -643,7 +644,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:647: checking target system type" >&5 +echo "configure:648: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -661,7 +662,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:665: checking build system type" >&5 +echo "configure:666: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -684,7 +685,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:688: checking rtems target cpu" >&5 +echo "configure:689: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -722,7 +723,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:726: checking for a BSD compatible install" >&5 +echo "configure:727: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -775,7 +776,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:779: checking whether build environment is sane" >&5 +echo "configure:780: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -832,7 +833,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:836: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:837: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -872,7 +873,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:876: checking for working aclocal" >&5 +echo "configure:877: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -885,7 +886,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:889: checking for working autoconf" >&5 +echo "configure:890: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -898,7 +899,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:902: checking for working automake" >&5 +echo "configure:903: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -911,7 +912,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:915: checking for working autoheader" >&5 +echo "configure:916: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -924,7 +925,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:928: checking for working makeinfo" >&5 +echo "configure:929: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -938,7 +939,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:942: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:943: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -976,6 +977,7 @@ fi + # Check whether --enable-posix or --disable-posix was given. if test "${enable_posix+set}" = set; then enableval="$enable_posix" @@ -1013,6 +1015,7 @@ esac + # Check whether --enable-networking or --disable-networking was given. if test "${enable_networking+set}" = set; then enableval="$enable_networking" @@ -1102,8 +1105,9 @@ fi + echo $ac_n "checking for RTEMS_BSP""... $ac_c" 1>&6 -echo "configure:1107: checking for RTEMS_BSP" >&5 +echo "configure:1111: checking for RTEMS_BSP" >&5 if eval "test \"`echo '$''{'rtems_cv_RTEMS_BSP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1119,9 +1123,10 @@ echo "$ac_t""${RTEMS_BSP}" 1>&6 + # Is this a supported CPU? echo $ac_n "checking if cpu $RTEMS_CPU is supported""... $ac_c" 1>&6 -echo "configure:1125: checking if cpu $RTEMS_CPU is supported" >&5 +echo "configure:1130: checking if cpu $RTEMS_CPU is supported" >&5 if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then echo "$ac_t""yes" 1>&6 else @@ -1182,7 +1187,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1186: checking for $ac_word" >&5 +echo "configure:1191: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_CC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1226,7 +1231,7 @@ rtems_save_CFLAGS=$CFLAGS CC=$CC_FOR_TARGET echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1230: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1235: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1237,12 +1242,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1241 "configure" +#line 1246 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1268,12 +1273,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1272: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1277: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1277: checking whether we are using GNU C" >&5 +echo "configure:1282: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1282,7 +1287,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1286: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1291: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1297,7 +1302,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1301: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1306: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1339,7 +1344,7 @@ unset ac_cv_prog_cc_cross echo $ac_n "checking whether $CC_FOR_TARGET accepts -specs""... $ac_c" 1>&6 -echo "configure:1343: checking whether $CC_FOR_TARGET accepts -specs" >&5 +echo "configure:1348: checking whether $CC_FOR_TARGET accepts -specs" >&5 if eval "test \"`echo '$''{'rtems_cv_gcc_specs'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1360,7 +1365,7 @@ echo "$ac_t""$rtems_cv_gcc_specs" 1>&6 echo $ac_n "checking whether $CC_FOR_TARGET accepts --pipe""... $ac_c" 1>&6 -echo "configure:1364: checking whether $CC_FOR_TARGET accepts --pipe" >&5 +echo "configure:1369: checking whether $CC_FOR_TARGET accepts --pipe" >&5 if eval "test \"`echo '$''{'rtems_cv_gcc_pipe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1408,7 +1413,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1412: checking for $ac_word" >&5 +echo "configure:1417: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_CXX_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1452,7 +1457,7 @@ rtems_save_CXXFLAGS=$CXXFLAGS CXX=$CXX_FOR_TARGET echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1456: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 +echo "configure:1461: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1463,12 +1468,12 @@ cross_compiling=$ac_cv_prog_cxx_cross cat > conftest.$ac_ext << EOF -#line 1467 "configure" +#line 1472 "configure" #include "confdefs.h" int main(){return(0);} EOF -if { (eval echo configure:1472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cxx_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1494,12 +1499,12 @@ if test $ac_cv_prog_cxx_works = no; then { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1498: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1503: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 cross_compiling=$ac_cv_prog_cxx_cross echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:1503: checking whether we are using GNU C++" >&5 +echo "configure:1508: checking whether we are using GNU C++" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1508,7 +1513,7 @@ else yes; #endif EOF -if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1512: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1517: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gxx=yes else ac_cv_prog_gxx=no @@ -1523,7 +1528,7 @@ if test $ac_cv_prog_gxx = yes; then ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS= echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:1527: checking whether ${CXX-g++} accepts -g" >&5 +echo "configure:1532: checking whether ${CXX-g++} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1576,7 +1581,7 @@ fi echo $ac_n "checking target's ar""... $ac_c" 1>&6 -echo "configure:1580: checking target's ar" >&5 +echo "configure:1585: checking target's ar" >&5 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1609,7 +1614,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable AR_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1613: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5 +echo "configure:1618: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5 case "$AR_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1626,7 +1631,7 @@ echo "configure:1613: checking whether environment variable AR_FOR_TARGET is an # Extract the first word of ""$program_prefix"ar", so it can be a program name with args. set dummy "$program_prefix"ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1630: checking for $ac_word" >&5 +echo "configure:1635: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1663,7 +1668,7 @@ fi echo $ac_n "checking target's as""... $ac_c" 1>&6 -echo "configure:1667: checking target's as" >&5 +echo "configure:1672: checking target's as" >&5 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1696,7 +1701,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable AS_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1700: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5 +echo "configure:1705: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5 case "$AS_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1713,7 +1718,7 @@ echo "configure:1700: checking whether environment variable AS_FOR_TARGET is an # Extract the first word of ""$program_prefix"as", so it can be a program name with args. set dummy "$program_prefix"as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1717: checking for $ac_word" >&5 +echo "configure:1722: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1750,7 +1755,7 @@ fi echo $ac_n "checking target's ld""... $ac_c" 1>&6 -echo "configure:1754: checking target's ld" >&5 +echo "configure:1759: checking target's ld" >&5 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1783,7 +1788,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable LD_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1787: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5 +echo "configure:1792: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5 case "$LD_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1800,7 +1805,7 @@ echo "configure:1787: checking whether environment variable LD_FOR_TARGET is an # Extract the first word of ""$program_prefix"ld", so it can be a program name with args. set dummy "$program_prefix"ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1804: checking for $ac_word" >&5 +echo "configure:1809: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1837,7 +1842,7 @@ fi echo $ac_n "checking target's nm""... $ac_c" 1>&6 -echo "configure:1841: checking target's nm" >&5 +echo "configure:1846: checking target's nm" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1870,7 +1875,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable NM_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1874: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5 +echo "configure:1879: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5 case "$NM_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1887,7 +1892,7 @@ echo "configure:1874: checking whether environment variable NM_FOR_TARGET is an # Extract the first word of ""$program_prefix"nm", so it can be a program name with args. set dummy "$program_prefix"nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1891: checking for $ac_word" >&5 +echo "configure:1896: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1925,7 +1930,7 @@ fi echo $ac_n "checking target's ranlib""... $ac_c" 1>&6 -echo "configure:1929: checking target's ranlib" >&5 +echo "configure:1934: checking target's ranlib" >&5 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1958,7 +1963,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable RANLIB_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:1962: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5 +echo "configure:1967: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5 case "$RANLIB_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -1975,7 +1980,7 @@ echo "configure:1962: checking whether environment variable RANLIB_FOR_TARGET is # Extract the first word of ""$program_prefix"ranlib", so it can be a program name with args. set dummy "$program_prefix"ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1979: checking for $ac_word" >&5 +echo "configure:1984: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2014,7 +2019,7 @@ fi # ranlib wasn't found; check if ar -s is available echo $ac_n "checking whether $AR_FOR_TARGET -s works""... $ac_c" 1>&6 -echo "configure:2018: checking whether $AR_FOR_TARGET -s works" >&5 +echo "configure:2023: checking whether $AR_FOR_TARGET -s works" >&5 if eval "test \"`echo '$''{'rtems_cv_AR_FOR_TARGET_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2023,8 +2028,8 @@ cat > conftest.$ac_ext <<EOF int foo( int b ) { return b; } EOF -if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:2027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ - && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:2028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ +if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:2032: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ + && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:2033: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ && test -s conftest.a ; \ then rtems_cv_AR_FOR_TARGET_S="yes" @@ -2049,7 +2054,7 @@ echo "$ac_t""$rtems_cv_AR_FOR_TARGET_S" 1>&6 echo $ac_n "checking target's objcopy""... $ac_c" 1>&6 -echo "configure:2053: checking target's objcopy" >&5 +echo "configure:2058: checking target's objcopy" >&5 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2082,7 +2087,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2086: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5 +echo "configure:2091: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5 case "$OBJCOPY_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2099,7 +2104,7 @@ echo "configure:2086: checking whether environment variable OBJCOPY_FOR_TARGET i # Extract the first word of ""$program_prefix"objcopy", so it can be a program name with args. set dummy "$program_prefix"objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2103: checking for $ac_word" >&5 +echo "configure:2108: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2136,7 +2141,7 @@ fi echo $ac_n "checking target's size""... $ac_c" 1>&6 -echo "configure:2140: checking target's size" >&5 +echo "configure:2145: checking target's size" >&5 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2169,7 +2174,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable SIZE_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2173: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5 +echo "configure:2178: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5 case "$SIZE_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2186,7 +2191,7 @@ echo "configure:2173: checking whether environment variable SIZE_FOR_TARGET is a # Extract the first word of ""$program_prefix"size", so it can be a program name with args. set dummy "$program_prefix"size; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2190: checking for $ac_word" >&5 +echo "configure:2195: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2223,7 +2228,7 @@ fi echo $ac_n "checking target's strip""... $ac_c" 1>&6 -echo "configure:2227: checking target's strip" >&5 +echo "configure:2232: checking target's strip" >&5 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2256,7 +2261,7 @@ else # will override the environment variable, which isn't what the user # intends echo $ac_n "checking whether environment variable STRIP_FOR_TARGET is an absolute path""... $ac_c" 1>&6 -echo "configure:2260: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5 +echo "configure:2265: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5 case "$STRIP_FOR_TARGET" in /*) # valid echo "$ac_t"""yes"" 1>&6 @@ -2273,7 +2278,7 @@ echo "configure:2260: checking whether environment variable STRIP_FOR_TARGET is # Extract the first word of ""$program_prefix"strip", so it can be a program name with args. set dummy "$program_prefix"strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2277: checking for $ac_word" >&5 +echo "configure:2282: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2310,16 +2315,19 @@ fi + + echo $ac_n "checking for make/custom/$RTEMS_BSP.cfg""... $ac_c" 1>&6 -echo "configure:2315: checking for make/custom/$RTEMS_BSP.cfg" >&5 +echo "configure:2322: checking for make/custom/$RTEMS_BSP.cfg" >&5 if test -r "$srcdir/$RTEMS_TOPdir/make/custom/$RTEMS_BSP.cfg"; then echo "$ac_t""yes" 1>&6 else { echo "configure: error: no" 1>&2; exit 1; } fi + echo $ac_n "checking whether BSP supports multiprocessing""... $ac_c" 1>&6 -echo "configure:2323: checking whether BSP supports multiprocessing" >&5 +echo "configure:2331: checking whether BSP supports multiprocessing" >&5 if eval "test \"`echo '$''{'rtems_cv_HAS_MP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2342,8 +2350,9 @@ HAS_MP="no" fi + echo $ac_n "checking whether BSP supports libposix""... $ac_c" 1>&6 -echo "configure:2347: checking whether BSP supports libposix" >&5 +echo "configure:2356: checking whether BSP supports libposix" >&5 if eval "test \"`echo '$''{'rtems_cv_HAS_POSIX_API'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2369,7 +2378,7 @@ else fi echo $ac_n "checking whether to build rtems++""... $ac_c" 1>&6 -echo "configure:2373: checking whether to build rtems++" >&5 +echo "configure:2382: checking whether to build rtems++" >&5 if eval "test \"`echo '$''{'rtems_cv_HAS_CPLUSPLUS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else |