1 files changed, 0 insertions, 99 deletions
diff --git a/c/src/libchip/rtc/ds1375-rtc.h b/c/src/libchip/rtc/ds1375-rtc.h
deleted file mode 100644
index a5be96293f..0000000000
--- a/c/src/libchip/rtc/ds1375-rtc.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef DS1375_I2C_RTC_H
-#define DS1375_I2C_RTC_H
-
-/* Driver for the Maxim 1375 i2c RTC (TOD only; very simple...) */
-
-/*
- * Authorship
- * ----------
- * This software was created by
- *
- *     Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
- * 	   Stanford Linear Accelerator Center, Stanford University.
- *
- * Acknowledgement of sponsorship
- * ------------------------------
- * The software was produced by
- *     the Stanford Linear Accelerator Center, Stanford University,
- * 	   under Contract DE-AC03-76SFO0515 with the Department of Energy.
- *
- * Government disclaimer of liability
- * ----------------------------------
- * Neither the United States nor the United States Department of Energy,
- * nor any of their employees, makes any warranty, express or implied, or
- * assumes any legal liability or responsibility for the accuracy,
- * completeness, or usefulness of any data, apparatus, product, or process
- * disclosed, or represents that its use would not infringe privately owned
- * rights.
- *
- * Stanford disclaimer of liability
- * --------------------------------
- * Stanford University makes no representations or warranties, express or
- * implied, nor assumes any liability for the use of this software.
- *
- * Stanford disclaimer of copyright
- * --------------------------------
- * Stanford University, owner of the copyright, hereby disclaims its
- * copyright and all other rights in this software.  Hence, anyone may
- * freely use it for any purpose without restriction.
- *
- * Maintenance of notices
- * ----------------------
- * In the interest of clarity regarding the origin and status of this
- * SLAC software, this and all the preceding Stanford University notices
- * are to remain affixed to any copy or derivative of this software made
- * or distributed by the recipient and are to be affixed to any copy of
- * software made or distributed by the recipient that contains a copy or
- * derivative of this software.
- *
- * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
- */
-
-#include <rtems.h>
-#include <libchip/rtc.h>
-#include <stdint.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern rtc_fns rtc_ds1375_fns;
-
-bool
-rtc_ds1375_device_probe( int minor );
-
-uint32_t
-rtc_ds1375_get_register( uintptr_t port, uint8_t reg );
-
-void
-rtc_ds1375_set_register( uintptr_t port, uint8_t reg, uint32_t value );
-
-/*
- * BSP must supply string constant argument 'i2cname' which matches
- * the registered device name of the raw i2c device (created with mknod).
- * E.g., "/dev/i2c.ds1375-raw"
- *
- * NOTE: The i2c bus driver must already be up and 'i2cname' already
- *       be available when this ENTRY is registered or initialized.
- *
- *       If you want to allow applications to add the RTC driver to
- *       the configuration table then the i2c subsystem must be
- *       initialized by the BSP from the predriver_hook.
- */
-#define DS1375_RTC_TBL_ENTRY(i2cname) \
-{                                              	      \
-	sDeviceName:	"/dev/rtc",                       \
-	deviceType:	RTC_CUSTOM,                       \
-	pDeviceFns:	&rtc_ds1375_fns,                  \
-	deviceProbe:	rtc_ds1375_device_probe,          \
-	ulCtrlPort1:	(uintptr_t)(i2cname),             \
-	ulDataPort:	0,                                \
-	getRegister:	rtc_ds1375_get_register,          \
-	setRegister:	rtc_ds1375_set_register,          \
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif