diff options
Diffstat (limited to 'c/src/lib/libchip/serial/z85c30_p.h')
| -rw-r--r-- | c/src/lib/libchip/serial/z85c30_p.h | 385 |
1 files changed, 385 insertions, 0 deletions
diff --git a/c/src/lib/libchip/serial/z85c30_p.h b/c/src/lib/libchip/serial/z85c30_p.h new file mode 100644 index 0000000000..29f1aa7624 --- /dev/null +++ b/c/src/lib/libchip/serial/z85c30_p.h @@ -0,0 +1,385 @@ +/* z85c30_p.h + * + * This include file contains all private driver definations for the z85c30 + * + * COPYRIGHT (c) 1998 by Radstone Technology + * + * + * THIS FILE IS PROVIDED TO YOU, THE USER, "AS IS", WITHOUT WARRANTY OF ANY + * KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK + * AS TO THE QUALITY AND PERFORMANCE OF ALL CODE IN THIS FILE IS WITH YOU. + * + * You are hereby granted permission to use, copy, modify, and distribute + * this file, provided that this notice, plus the above copyright notice + * and disclaimer, appears in all copies. Radstone Technology will provide + * no support for this code. + * + * COPYRIGHT (c) 1989-1997. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may in + * the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id: + */ + +#ifndef __Z85C30_P_H +#define __Z85C30_P_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* bit values for write register 0 */ +/* command register */ + +#define SCC_WR0_SEL_WR0 0x00 +#define SCC_WR0_SEL_WR1 0x01 +#define SCC_WR0_SEL_WR2 0x02 +#define SCC_WR0_SEL_WR3 0x03 +#define SCC_WR0_SEL_WR4 0x04 +#define SCC_WR0_SEL_WR5 0x05 +#define SCC_WR0_SEL_WR6 0x06 +#define SCC_WR0_SEL_WR7 0x07 +#define SCC_WR0_SEL_WR8 0x08 +#define SCC_WR0_SEL_WR9 0x09 +#define SCC_WR0_SEL_WR10 0x0a +#define SCC_WR0_SEL_WR11 0x0b +#define SCC_WR0_SEL_WR12 0x0c +#define SCC_WR0_SEL_WR13 0x0d +#define SCC_WR0_SEL_WR14 0x0e +#define SCC_WR0_SEL_WR15 0x0f +#define SCC_WR0_SEL_RD0 0x00 +#define SCC_WR0_SEL_RD1 0x01 +#define SCC_WR0_SEL_RD2 0x02 +#define SCC_WR0_SEL_RD3 0x03 +#define SCC_WR0_SEL_RD4 0x04 +#define SCC_WR0_SEL_RD5 0x05 +#define SCC_WR0_SEL_RD6 0x06 +#define SCC_WR0_SEL_RD7 0x07 +#define SCC_WR0_SEL_RD8 0x08 +#define SCC_WR0_SEL_RD9 0x09 +#define SCC_WR0_SEL_RD10 0x0a +#define SCC_WR0_SEL_RD11 0x0b +#define SCC_WR0_SEL_RD12 0x0c +#define SCC_WR0_SEL_RD13 0x0d +#define SCC_WR0_SEL_RD14 0x0e +#define SCC_WR0_SEL_RD15 0x0f +#define SCC_WR0_NULL_CODE 0x00 +#define SCC_WR0_RST_INT 0x10 +#define SCC_WR0_SEND_ABORT 0x18 +#define SCC_WR0_EN_INT_RX 0x20 +#define SCC_WR0_RST_TX_INT 0x28 +#define SCC_WR0_ERR_RST 0x30 +#define SCC_WR0_RST_HI_IUS 0x38 +#define SCC_WR0_RST_RX_CRC 0x40 +#define SCC_WR0_RST_TX_CRC 0x80 +#define SCC_WR0_RST_TX_UND 0xc0 + +/* write register 2 */ +/* interrupt vector */ + +/* bit values for write register 1 */ +/* tx/rx interrupt and data transfer mode definition */ + +#define SCC_WR1_EXT_INT_EN 0x01 +#define SCC_WR1_TX_INT_EN 0x02 +#define SCC_WR1_PARITY 0x04 +#define SCC_WR1_RX_INT_DIS 0x00 +#define SCC_WR1_RX_INT_FIR 0x08 +#define SCC_WR1_INT_ALL_RX 0x10 +#define SCC_WR1_RX_INT_SPE 0x18 +#define SCC_WR1_RDMA_RECTR 0x20 +#define SCC_WR1_RDMA_FUNC 0x40 +#define SCC_WR1_RDMA_EN 0x80 + +/* bit values for write register 3 */ +/* receive parameters and control */ + +#define SCC_WR3_RX_EN 0x01 +#define SCC_WR3_SYNC_CHAR 0x02 +#define SCC_WR3_ADR_SEARCH 0x04 +#define SCC_WR3_RX_CRC_EN 0x08 +#define SCC_WR3_ENTER_HUNT 0x10 +#define SCC_WR3_AUTO_EN 0x20 +#define SCC_WR3_RX_5_BITS 0x00 +#define SCC_WR3_RX_7_BITS 0x40 +#define SCC_WR3_RX_6_BITS 0x80 +#define SCC_WR3_RX_8_BITS 0xc0 + +/* bit values for write register 4 */ +/* tx/rx misc parameters and modes */ + +#define SCC_WR4_PAR_EN 0x01 +#define SCC_WR4_PAR_EVEN 0x02 +#define SCC_WR4_SYNC_EN 0x00 +#define SCC_WR4_1_STOP 0x04 +#define SCC_WR4_2_STOP 0x0c +#define SCC_WR4_8_SYNC 0x00 +#define SCC_WR4_16_SYNC 0x10 +#define SCC_WR4_SDLC 0x20 +#define SCC_WR4_EXT_SYNC 0x30 +#define SCC_WR4_1_CLOCK 0x00 +#define SCC_WR4_16_CLOCK 0x40 +#define SCC_WR4_32_CLOCK 0x80 +#define SCC_WR4_64_CLOCK 0xc0 + +/* bit values for write register 5 */ +/* transmit parameter and controls */ + +#define SCC_WR5_TX_CRC_EN 0x01 +#define SCC_WR5_RTS 0x02 +#define SCC_WR5_SDLC 0x04 +#define SCC_WR5_TX_EN 0x08 +#define SCC_WR5_SEND_BRK 0x10 + +#define SCC_WR5_TX_5_BITS 0x00 +#define SCC_WR5_TX_7_BITS 0x20 +#define SCC_WR5_TX_6_BITS 0x40 +#define SCC_WR5_TX_8_BITS 0x60 +#define SCC_WR5_DTR 0x80 + +/* write register 6 */ +/* sync chars or sdlc address field */ + +/* write register 7 */ +/* sync char or sdlc flag */ + +/* write register 8 */ +/* transmit buffer */ + +/* bit values for write register 9 */ +/* master interrupt control */ + +#define SCC_WR9_VIS 0x01 +#define SCC_WR9_NV 0x02 +#define SCC_WR9_DLC 0x04 +#define SCC_WR9_MIE 0x08 +#define SCC_WR9_STATUS_HI 0x10 +#define SCC_WR9_NO_RST 0x00 +#define SCC_WR9_CH_B_RST 0x40 +#define SCC_WR9_CH_A_RST 0x80 +#define SCC_WR9_HDWR_RST 0xc0 + +/* bit values for write register 10 */ +/* misc tx/rx control bits */ + +#define SCC_WR10_6_BIT_SYNC 0x01 +#define SCC_WR10_LOOP_MODE 0x02 +#define SCC_WR10_ABORT_UND 0x04 +#define SCC_WR10_MARK_IDLE 0x08 +#define SCC_WR10_ACT_POLL 0x10 +#define SCC_WR10_NRZ 0x00 +#define SCC_WR10_NRZI 0x20 +#define SCC_WR10_FM1 0x40 +#define SCC_WR10_FM0 0x60 +#define SCC_WR10_CRC_PRESET 0x80 + +/* bit values for write register 11 */ +/* clock mode control */ + +#define SCC_WR11_OUT_XTAL 0x00 +#define SCC_WR11_OUT_TX_CLK 0x01 +#define SCC_WR11_OUT_BR_GEN 0x02 +#define SCC_WR11_OUT_DPLL 0x03 +#define SCC_WR11_TRXC_OI 0x04 +#define SCC_WR11_TX_RTXC 0x00 +#define SCC_WR11_TX_TRXC 0x08 +#define SCC_WR11_TX_BR_GEN 0x10 +#define SCC_WR11_TX_DPLL 0x18 +#define SCC_WR11_RX_RTXC 0x00 +#define SCC_WR11_RX_TRXC 0x20 +#define SCC_WR11_RX_BR_GEN 0x40 +#define SCC_WR11_RX_DPLL 0x60 +#define SCC_WR11_RTXC_XTAL 0x80 + +/* write register 12 */ +/* lower byte of baud rate generator time constant */ + +/* write register 13 */ +/* upper byte of baud rate generator time constant */ + +/* bit values for write register 14 */ +/* misc control bits */ + +#define SCC_WR14_BR_EN 0x01 +#define SCC_WR14_BR_SRC 0x02 +#define SCC_WR14_DTR_FUNC 0x04 +#define SCC_WR14_AUTO_ECHO 0x08 +#define SCC_WR14_LCL_LOOP 0x10 +#define SCC_WR14_NULL 0x00 +#define SCC_WR14_SEARCH 0x20 +#define SCC_WR14_RST_CLK 0x40 +#define SCC_WR14_DIS_DPLL 0x60 +#define SCC_WR14_SRC_BR 0x80 +#define SCC_WR14_SRC_RTXC 0xa0 +#define SCC_WR14_FM_MODE 0xc0 +#define SCC_WR14_NRZI 0xe0 + +/* bit values for write register 15 */ +/* external/status interrupt control */ + +#define SCC_WR15_ZERO_CNT 0x02 +#define SCC_WR15_CD_IE 0x08 +#define SCC_WR15_SYNC_IE 0x10 +#define SCC_WR15_CTS_IE 0x20 +#define SCC_WR15_TX_UND_IE 0x40 +#define SCC_WR15_BREAK_IE 0x80 + +/* bit values for read register 0 */ +/* tx/rx buffer status and external status */ + +#define SCC_RR0_RX_AVAIL 0x01 +#define SCC_RR0_ZERO_CNT 0x02 +#define SCC_RR0_TX_EMPTY 0x04 +#define SCC_RR0_CD 0x08 +#define SCC_RR0_SYNC 0x10 +#define SCC_RR0_CTS 0x20 +#define SCC_RR0_TX_UND 0x40 +#define SCC_RR0_BREAK 0x80 + +/* bit values for read register 1 */ + +#define SCC_RR1_ALL_SENT 0x01 +#define SCC_RR1_RES_CD_2 0x02 +#define SCC_RR1_RES_CD_1 0x01 +#define SCC_RR1_RES_CD_0 0x08 +#define SCC_RR1_PAR_ERR 0x10 +#define SCC_RR1_RX_OV_ERR 0x20 +#define SCC_RR1_CRC_ERR 0x40 +#define SCC_RR1_END_FRAME 0x80 + +/* read register 2 */ +/* interrupt vector */ + +/* bit values for read register 3 */ +/* interrupt pending register */ + +#define SCC_RR3_B_EXT_IP 0x01 +#define SCC_RR3_B_TX_IP 0x02 +#define SCC_RR3_B_RX_IP 0x04 +#define SCC_RR3_A_EXT_IP 0x08 +#define SCC_RR3_A_TX_IP 0x10 +#define SCC_RR3_A_RX_IP 0x20 + +/* read register 8 */ +/* receive data register */ + +/* bit values for read register 10 */ +/* misc status bits */ + +#define SCC_RR10_ON_LOOP 0x02 +#define SCC_RR10_LOOP_SEND 0x10 +#define SCC_RR10_2_CLK_MIS 0x40 +#define SCC_RR10_1_CLK_MIS 0x80 + +/* read register 12 */ +/* lower byte of time constant */ + +/* read register 13 */ +/* upper byte of time constant */ + +/* bit values for read register 15 */ +/* external/status ie bits */ + +#define SCC_RR15_ZERO_CNT 0x02 +#define SCC_RR15_CD_IE 0x08 +#define SCC_RR15_SYNC_IE 0x10 +#define SCC_RR15_CTS_IE 0x20 +#define SCC_RR15_TX_UND_IE 0x40 +#define SCC_RR15_BREAK_IE 0x80 + +typedef struct _z85c30_context +{ + unsigned8 ucModemCtrl; +} z85c30_context; + +/* + * The following macro calculates the Baud constant. For the Z85C30 chip. + * + * Note: baud constant = ((clock frequency / Clock_X) / (2 * Baud Rate)) - 2 + * eg ((10,000,000 / 16) / (2 * Baud Rate)) - 2 + */ +#define Z85C30_Baud( _clock, _baud_rate ) \ + ( ((_clock) /( 16 * 2 * _baud_rate)) - 2) + +#define Z85C30_Status_Is_RX_character_available(_status) \ + ((_status) & SCC_RR0_RX_AVAIL) + +#define Z85C30_Status_Is_TX_buffer_empty(_status) \ + ((_status) & SCC_RR0_TX_EMPTY) + +#define Z85C30_Status_Is_CTS_asserted(_status) \ + ((_status) & SCC_RR0_CTS) + +#define Z85C30_Status_Is_break_abort(_status) \ + ((_status) & SCC_RR0_BREAK) + +/* + * Private routines + */ +static boolean z85c30_probe(int minor); + +static void z85c30_init(int minor); + +static int z85c30_open( + int major, + int minor, + void * arg +); + +static int z85c30_close( + int major, + int minor, + void * arg +); + +static void z85c30_write_polled( + int minor, + char cChar +); + +static int z85c30_assert_RTS( + int minor +); + +static int z85c30_negate_RTS( + int minor +); + +static int z85c30_assert_DTR( + int minor +); + +static int z85c30_negate_DTR( + int minor +); + +static void z85c30_initialize_interrupts(int minor); + +static int z85c30_flush(int major, int minor, void *arg); + +static int z85c30_write_support_int( + int minor, + const char *buf, + int len +); + +static int z85c30_write_support_polled( + int minor, + const char *buf, + int len +); + +static int z85c30_inbyte_nonblocking_polled( + int minor +); + +#ifdef __cplusplus +} +#endif + +#endif |