8 files changed, 0 insertions, 17 deletions
diff --git a/c/src/lib/libbsp/sh/simsh4/clock/ckinit.c b/c/src/lib/libbsp/sh/simsh4/clock/ckinit.c
index c434f6892e..1d4b23e661 100644
--- a/c/src/lib/libbsp/sh/simsh4/clock/ckinit.c
+++ b/c/src/lib/libbsp/sh/simsh4/clock/ckinit.c
@@ -25,7 +25,6 @@
  */
 volatile uint32_t         Clock_driver_ticks;
 
-
 /*
  * These are set by clock driver during its init
  */
@@ -63,7 +62,6 @@ Clock_isr (rtems_vector_number vector)
     rtems_clock_tick();
 }
 
-
 /* Clock_exit --
  *     This shuts down the timer if it was enabled and removes it
  *     from the interrupt mask.
@@ -84,7 +82,6 @@ Clock_exit(void)
     }
 }
 
-
 /* Install_clock --
  *     This initialises timer1 with the BSP timeslice config value
  *     as a reference and sets up the interrupt handler for clock ticks.
@@ -117,7 +114,6 @@ Install_clock(rtems_isr_entry clock_isr)
     }
 }
 
-
 /* Clock_initialize --
  *     This is called to setup the clock driver. It calls the hardware
  *     setup function and make the driver major/minor values available
@@ -145,7 +141,6 @@ Clock_initialize(rtems_device_major_number major,
     return RTEMS_SUCCESSFUL;
 }
 
-
 /* Clock_control --
  *     I/O control (IOCTL) function for Clock driver. At this moment this
  *     just runs the interrupt handler or re-registers the interrupt handler
diff --git a/c/src/lib/libbsp/sh/simsh4/console/console.c b/c/src/lib/libbsp/sh/simsh4/console/console.c
index f6d12c20d2..c0af42111b 100644
--- a/c/src/lib/libbsp/sh/simsh4/console/console.c
+++ b/c/src/lib/libbsp/sh/simsh4/console/console.c
@@ -20,7 +20,6 @@
 #include <rtems/libio.h>
 #include <syscall.h>
 
-
 /* Console operations mode:
  *     0 - raw (non-termios) polled input/output
  *     1 - termios-based polled input/output
@@ -32,7 +31,6 @@
 
 int console_mode = CONSOLE_MODE_RAW;
 
-
 /* console_poll_read --
  *     poll read operation for simulator console through trap 34 mechanism.
  *
diff --git a/c/src/lib/libbsp/sh/simsh4/include/bsp.h b/c/src/lib/libbsp/sh/simsh4/include/bsp.h
index 4b9205b4b5..e978e624c8 100644
--- a/c/src/lib/libbsp/sh/simsh4/include/bsp.h
+++ b/c/src/lib/libbsp/sh/simsh4/include/bsp.h
@@ -103,7 +103,6 @@ extern "C" {
 #define delay( microseconds ) CPU_delay(microseconds)
 #define sh_delay( microseconds ) CPU_delay( microseconds )
 
-
 /*
  * Defined in the linker script 'linkcmds'
  */
@@ -116,7 +115,6 @@ extern uint32_t         WorkSpaceEnd ;
 extern void *CPU_Interrupt_stack_low ;
 extern void *CPU_Interrupt_stack_high ;
 
-
 /* miscellaneous stuff assumed to exist */
 
 extern rtems_configuration_table BSP_Configuration;
@@ -138,7 +136,6 @@ extern void bsp_cleanup( void );
   { ramdisk_initialize, ramdisk_open, ramdisk_close, \
         ramdisk_read, ramdisk_write, ramdisk_control }
 
-
 /*
  * NOTE: Use the standard Clock driver entry
  */
diff --git a/c/src/lib/libbsp/sh/simsh4/include/ramdisk.h b/c/src/lib/libbsp/sh/simsh4/include/ramdisk.h
index 82e0dc51e1..f77a3f6eeb 100644
--- a/c/src/lib/libbsp/sh/simsh4/include/ramdisk.h
+++ b/c/src/lib/libbsp/sh/simsh4/include/ramdisk.h
@@ -22,7 +22,6 @@
 extern "C" {
 #endif
 
-
 rtems_device_driver ramdisk_initialize(rtems_device_major_number major,
                                        rtems_device_minor_number minor,
                                        void *arg);
diff --git a/c/src/lib/libbsp/sh/simsh4/include/syscall.h b/c/src/lib/libbsp/sh/simsh4/include/syscall.h
index f141df764c..79fcc07a20 100644
--- a/c/src/lib/libbsp/sh/simsh4/include/syscall.h
+++ b/c/src/lib/libbsp/sh/simsh4/include/syscall.h
@@ -20,7 +20,6 @@
 #define SYS_fstat       22
 #define SYS_time 	23
 
-
 #define SYS_ARG		24
 #define	SYS_stat	38
 
diff --git a/c/src/lib/libbsp/sh/simsh4/start/start.S b/c/src/lib/libbsp/sh/simsh4/start/start.S
index 0466ded3e5..3b7cce61f6 100644
--- a/c/src/lib/libbsp/sh/simsh4/start/start.S
+++ b/c/src/lib/libbsp/sh/simsh4/start/start.S
@@ -54,7 +54,6 @@ SYM (start):
         mov.l   _vbr_base_k,r0
         ldc     r0,vbr
 
-
 #ifdef	START_HW_INIT	/* from $RTEMS_BSP.cfg */
 	! Initialize minimal hardware
 	mov.l	hw_init_k, r0
@@ -112,7 +111,6 @@ ___trap34:
 !perrno:
 !	.long	_errno
 
-
 	END_CODE
 
 	.align 2
diff --git a/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c b/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c
index f0b9f04ff8..5eaa59989a 100644
--- a/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c
+++ b/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c
@@ -129,7 +129,6 @@ void bsp_start(void)
     (uint32_t) (&CPU_Interrupt_stack_low) ;
 #endif
 
-
   Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
   Cpu_table.postdriver_hook = bsp_postdriver_hook;
 
diff --git a/c/src/lib/libbsp/sh/simsh4/timer/timer.c b/c/src/lib/libbsp/sh/simsh4/timer/timer.c
index 236f4fd226..5b47dc7d47 100644
--- a/c/src/lib/libbsp/sh/simsh4/timer/timer.c
+++ b/c/src/lib/libbsp/sh/simsh4/timer/timer.c
@@ -27,7 +27,6 @@ rtems_boolean Timer_driver_Find_average_overhead;
 /* External assembler interrupt handler routine */
 extern rtems_isr timerisr(rtems_vector_number vector);
 
-
 /* Timer_initialize --
  *     Initialize timer 2 for accurate time measurement.
  *
@@ -75,7 +74,6 @@ Read_timer( void )
     return 0;
 }
 
-
 /* Empty_function --
  *     Empty function call used in loops to measure basic cost of looping
  *     in Timing Test Suite.