1 files changed, 0 insertions, 42 deletions
diff --git a/c/src/lib/libbsp/sh/shsim/README b/c/src/lib/libbsp/sh/shsim/README
deleted file mode 100644
index 866fedafa2..0000000000
--- a/c/src/lib/libbsp/sh/shsim/README
+++ /dev/null
@@ -1,42 +0,0 @@
-Simple BSP for the SH simulator built into gdb.
-
-Simulator Invocation
-====================
-sh-rtems[elf|]-gdb <executable>
-(gdb) target sim
-(gdb) set archi [sh|sh2]
-(gdb) load <executable>
-(gdb) run
-
-Status
-======
-
-* The simulator invocation procedure outlined above produces error messages
-with gdb-5.0, nevertheless seems to work. With gdb versions > 5.0 these
-error messages are gone. I.e. if you plan to seriously work with the gdb
-simulator better use gdb versions > 5.0.
-
-* gdb's simulator is not able to correctly emulate memory areas esp. shadowing
-and non-consecutive memory. I.e. access to memory areas besides area 0 will 
-(bogusly) generate SIGBUS exceptions.  This includes access to area 5 
-(On-chip peripherials) and prevents simulation of configuration and access
-to on-chip peripherials.
-
-* Due to limitations of the simulator you will only be able to run
-applications which do not try to access any SH control registers.
-
-Currently, this excludes all applications, which apply timers and serial 
-devices, i.e. almost any real world application.
-
-* This BSP supports 3 different console devices (cf. configure --help):
-- trap34, an interface base on gdb's trap34 emulation. Known to work with
-  gdb-5.0.
-- gdbsci1, a stripped down sci device driver adapted to apply gdb's sci1
-emulation. This is known to fail with gdb-5.0, because of a bug in gdb-5.0's 
-sh-sim, a patch is submitted, but .. ~==
-- devnull, redirection of console io to /dev/null. Try to single step this,
-if you want to understand the details on how SH-RTEMS console redirection
-works.
-
-NOTE: the trap34 interface is incomplete and is temporarily disabled
-inside of configure.in.