1 files changed, 0 insertions, 91 deletions
diff --git a/c/src/lib/libbsp/sh/gensh4/README b/c/src/lib/libbsp/sh/gensh4/README
deleted file mode 100644
index 13e719d72f..0000000000
--- a/c/src/lib/libbsp/sh/gensh4/README
+++ /dev/null
@@ -1,91 +0,0 @@
-#  Author: Alexandra Kossovsky <sasha@oktet.ru>
-#          Victor Vengerov     <vvv@oktet.ru>
-#   OKTET Ltd, http://www.oktet.ru
-#
-
-BSP NAME:           generic SH4 (gensh4)
-BOARD:              n/a
-BUS:                n/a
-CPU FAMILY:         Hitachi SH
-CPU:                SH 7750
-COPROCESSORS:	    none
-MODE:               n/a
-
-DEBUG MONITOR:      gdb (sh-ipl-g+ loader/stub)
-
-PERIPHERALS
-===========
-TIMERS:             on-chip
-SERIAL PORTS:       on-chip (with 2 ports)
-REAL-TIME CLOCK:    none
-DMA:                not used
-VIDEO:              none
-SCSI:               none
-NETWORKING:         none
-
-DRIVER INFORMATION
-==================
-CLOCK DRIVER:       on-chip timer
-IOSUPP DRIVER:      default
-SHMSUPP:            n/a
-TIMER DRIVER:       on-chip timer
-TTY DRIVER:         /dev/console
-
-STDIO
-=====
-PORT:               /dev/console
-ELECTRICAL:         n/a
-BAUD:               n/a
-BITS PER CHARACTER: n/a
-PARITY:             n/a
-STOP BITS:          n/a
-
-NOTES
-=====
-
-(1) Driver for the on-chip serial devices is tested only with 1st serial
-    port. We cannot test it on serial port with FIFO.
-
-    Console driver has 4 modes -- 2 with termios (interrupt-driven & 
-    poll-driven modes), one raw mode working with serial port directly,
-    without termios, and one mode working with gdb stub (using 'trapa'
-    handled by sh-ipl-g+).
-
-(2) The present 'hw_init.c' file provides 'early_hw_init'(void) which
-    is normally called from 'start.S' to provide such minimal HW setup.
-    It is written in C, but it should be noted that any accesses to memory
-    (except hardware registers) are prohibited until hardware not
-    initialized. To avoid access to stack, hw_init.c should be compiled with
-    -fomit-frame-pointer.
-
-    hw_init.c also provides 'bsp_cache_on'(void) normally called from
-    'start.S' after copying all data from rom to ram.
-
-(3) In 'configure.ac' you should properly set 'CPU_CLOCK_RATE_HZ'.
-    It is frequency fed to the CPU core (external clock frequency can be
-    multiplied by on-chip PLLs). Please note that it is not a frequency of
-    external oscillator! See Hardware Manual, section 10, for details.
-    Global variable 'SH4_CPU_HZ_Frequency' is declared in 'bsp.h' and 
-    initilized in 'bspstart.c' to ${HZ}. It is used by sci driver, 
-    which exists in 'libcpu/sh/sh7750'. 
-
-(4) There is SH4_WITH_IPL macro in console driver 'sh4_uart.h'. 
-    When it is defined, the application works under 
-    gdb-stub (it is able to turn cache on by 'trapa', use gdb mode in console
-    driver and get out from gdb to use other console modes).
-
-(5) There are 3 likcmds: 
-    - linkcmds: code and data loaded to RAM. No code/data moving required.
-    - linkcmds.rom: code executed from the ROM; .data section moved to the
-    RAM on initialization.
-    - linkcmds.rom2ram: execution started from the ROM (after reset); code
-    and data moved to the RAM and execution continued from RAM.
-
-    The same 'start.S' is used for all cases.
-
-(6) You can get gdb stub from http://www.oktet.ru/download/sh4/sh-ipl.tar.gz.
-    It is based on 'sh-ipl-g+' package used in sh-linux project.
-
-(7) This project was done in cooperation with Transas company
-    http://www.transas.com
-