diff options
Diffstat (limited to 'c/src/lib/libbsp/sh/gensh2/README.EVB7045F')
-rw-r--r-- | c/src/lib/libbsp/sh/gensh2/README.EVB7045F | 149 |
1 files changed, 0 insertions, 149 deletions
diff --git a/c/src/lib/libbsp/sh/gensh2/README.EVB7045F b/c/src/lib/libbsp/sh/gensh2/README.EVB7045F deleted file mode 100644 index 813cd6b816..0000000000 --- a/c/src/lib/libbsp/sh/gensh2/README.EVB7045F +++ /dev/null @@ -1,149 +0,0 @@ -# Author: Radzislaw Galler (rgaller@et.put.poznan.pl) -# - - -Getting started with EVB7045F and gensh2 -======================================== -This is a capture of success path to put a RTEMS sample -'hello.exe' on the evaluation board EVB7045F. - - What you need ---------------- - * Computer with two operating systems: Linux and Wndows 2000 (tm) - - that was in my case (see section 'Variations') - - * Flash Development Toolkit (FDT) - available on HMSE homepage - (http://www.hmse.com/products/fdt/support.htm) - - * 'gdbstubs' - available on SourceForge - (http://sourceforge.net/projects/gdbstubs/) - - * working GNU C compiler for Hitach SH processors; do-it-yourself - (on Linux) or download ready stuff for Windows'9x/NT/2k from - (http://www.hitachi-eu.com/hel/ecg/) or from Hitach Databook 2001 - CD-ROM (if no luck try to search on the net for gnu99r1p1.zip) - - * GDB compiled for target sh-rtems - do-it-yourself or download - from ftp://ftp.oarcorp.com:21/pub/rtems/snapshots/c_tools/ - - * RTEMS (ofcourse) you probably already have if you are reading this - document - - Instalation of 'gdbstubs' --------------------------- - Once you downladed and unzipped gdbstubs you have to compile - it. First modify the Makefile to use the compiler installed on your - machine. Then issue the command: - - $ make - - This should produce the default target sh2-7045edk.out. This is the - S-record file which should be added to FDT project (renaming it to - *.mot extension helps a bit). - If you are lucky you will be able to put the file into the FLASH - following the instuctions in FDT and EVB manuals. - - Well I wasn't lucky so I had to bypass the Universal Programming - Board (see EVB7045F User Manual) and manually put the processor into - BOOT mode. This can be done by shortening the capacitor C8 (or C108 - on schematics) which puts the UPB into permanent reset state, and by - removing jumper JP4 (or JP104 on schematics) and connecting its - middle pin to the ground. After pressing CRES button the processor - is in BOOT mode. In FDT select "direct connection": - - Menu Project->Properties->Device->Select Interface - - After that there should be no problem in putting the program into the - FLASH. - - Loading 'hello.exe' on board ------------------------------- - I assume you are able to compile RTEMS with 'gensh2' BSP and - necessary tools. If not please refer to 'started.pdf' document which - describes the procedure (http://www.oarcorp.com/). - - At the time of writing this document 'gdbstubs' default - communication port was SCI1. So it was the default port for - /dev/console in RTEMS. To avoid problems I had check these settings - both in 'gdbstubs' and $RTEMS_ROOT/c/src/lib/libbsp/sh/gensh2/include/bsp.h - - After changing the line - - #define BSP_CONSOLE_DEVNAME "/dev/sci1" - - to - - #define BSP_CONSOLE_DEVNAME "/dev/sci0" - - in 'bsp.h' and rebuilding RTEMS there should no problem in running - 'hello.exe' and other samples. - - For downloading connect a serial cable to computer and EVB. You will - also need a second cable and second serial port to see the effects - of your work. - - Assuming you are working in Linux and Xwindows fire up two terminal - windows. In the first one run sh-rtems-gdb, in the second run a - serial port terminal (for example 'minicom'). Set up the serial - terminal to a port connected to SCI0 and leave the window in a - visible place on the desktop. The debugger should be invoked best - from the directory where 'hello.exe' is placed. Assuming that here - is a GDB session: - - --------start------ - $ sh-rtems-gdb hello.exe - GNU gdb 5.0 - Copyright 2000 Free Software Foundation, Inc. - GDB is free software, covered by the GNU General Public License, and you are - welcome to change it and/or distribute copies of it under certain conditions. - Type "show copying" to see the conditions. - There is absolutely no warranty for GDB. Type "show warranty" for details. - This GDB was configured as "--host=i686-pc-linux-gnu --target=sh-rtems"... - (gdb) set remotebaud 115200 - (gdb) target remote /dev/ttyS0 - Remote debugging using /dev/ttyS0 - 0x0 in ?? () - (gdb) load - Loading section .text, size 0x12d70 lma 0x444000 - Loading section .data, size 0xb80 lma 0x456df0 - Loading section .stack, size 0x10 lma 0xfffffec0 - Start address 0x444000 , load size 80128 - Transfer rate: 58274 bits/sec, 153 bytes/write. - (gdb) continue - Continuing. - - Program received signal 0, Signal 0. - 0x44ec36 in exit (code=0) at exit.c:70 - 70 exit.c: No such file or directory. - (gdb) - --------end------- - - And here is a capture from the serial terminal window: - -*** HELLO WORLD TEST *** -Hello World -*** END OF HELLO WORLD TEST *** - - Beautiful, isn't it? That's all! - - - - Variations ------------- - I'm sure that not every one can afford having two operating systems - on one computer. I believe there will be a day that nobody will need - an MS stuff anymore... ;) - - It is possible to repeat the success on MS Windows only. To do the - same on Linux only you need a tool to downlad 'gdbstubs' on the - board. This should be no problem to find it on the net but right now - I don't know about it. - - For your convenience there are several graphical interfaces for GDB - available on the net. I just name two of them: - - DDD - stands for Data Display Debugger - (http://www.gnu.org/software/ddd/) - - Insight - a Tcl/Tk interface available both for MS Windows and - Xwindows (http://sources.redhat.com/insight/) |