diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/tqm8xx')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/tqm8xx/configure.ac | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac b/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac index b78ffaf15a..d989356eb6 100644 --- a/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac +++ b/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac @@ -1,5 +1,5 @@ ## Process this file with autoconf to produce a configure script. -## +## ## $Id$ AC_PREREQ(2.60) @@ -36,8 +36,8 @@ RTEMS_BSPOPTS_HELP([INSTRUCTION_CACHE_ENABLE], RTEMS_BSPOPTS_SET([CONSOLE_CHN],[*],[CONS_CHN_SMC1]) RTEMS_BSPOPTS_HELP([CONSOLE_CHN], -[(BSP--console driver) Must be defined to be one of CONS_CHN_SMC1, - CONS_CHN_SMC2, CONS_CHN_SCC1, CONS_CHN_SCC2, CONS_CHN_SCC3, or CONS_CHN_SCC4. +[(BSP--console driver) Must be defined to be one of CONS_CHN_SMC1, + CONS_CHN_SMC2, CONS_CHN_SCC1, CONS_CHN_SCC2, CONS_CHN_SCC3, or CONS_CHN_SCC4. Determines which device will be registered as /dev/console.]) RTEMS_BSPOPTS_SET([PRINTK_CHN],[*],[CONS_CHN_SMC1]) @@ -46,7 +46,7 @@ RTEMS_BSPOPTS_HELP([PRINTK_CHN], Must be defined to be one of CONS_CHN_SMC1, CONS_CHN_SMC2, CONS_CHN_SCC2, CONS_CHN_SCC3, or CONS_CHN_SCC4. Determines which device is used for output by printk(). If the port that printk() uses is also used for other - I/O (e.g. if PRINTK_CHN == CONSOLE_CHN), then both ports should + I/O (e.g. if PRINTK_CHN == CONSOLE_CHN), then both ports should use the same type of I/O, otherwise the drivers will likely conflict with each other.]) @@ -54,39 +54,39 @@ RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[tqm8xx_stk8xx],[CONS_MODE_POLLED]) RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[pghplus],[CONS_MODE_POLLED]) RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[*],[CONS_MODE_UNUSED]) RTEMS_BSPOPTS_HELP([CONS_SMC1_MODE], -[(BSP--SMC1 UART IF mode) Must be defined if SMC1 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for +[(BSP--SMC1 UART IF mode) Must be defined if SMC1 is used as a tty (UART) + channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) RTEMS_BSPOPTS_SET([CONS_SMC2_MODE],[tqm8xx_stk8xx],[CONS_MODE_POLLED]) RTEMS_BSPOPTS_SET([CONS_SMC2_MODE],[*],[CONS_MODE_UNUSED]) RTEMS_BSPOPTS_HELP([CONS_SMC2_MODE], -[(BSP--SMC2 UART IF mode) Must be defined if SMC2 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for +[(BSP--SMC2 UART IF mode) Must be defined if SMC2 is used as a tty (UART) + channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) RTEMS_BSPOPTS_SET([CONS_SCC1_MODE],[*],[CONS_MODE_UNUSED]) RTEMS_BSPOPTS_HELP([CONS_SCC1_MODE], -[(BSP--SCC1 UART IF mode) Must be defined if SCC1 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for +[(BSP--SCC1 UART IF mode) Must be defined if SCC1 is used as a tty (UART) + channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) RTEMS_BSPOPTS_SET([CONS_SCC2_MODE],[*],[CONS_MODE_UNUSED]) RTEMS_BSPOPTS_HELP([CONS_SCC2_MODE], -[(BSP--SCC2 UART IF mode) Must be defined if SCC2 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for +[(BSP--SCC2 UART IF mode) Must be defined if SCC2 is used as a tty (UART) + channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) RTEMS_BSPOPTS_SET([CONS_SCC3_MODE],[*],[CONS_MODE_UNUSED]) RTEMS_BSPOPTS_HELP([CONS_SCC3_MODE], -[(BSP--SCC3 UART IF mode) Must be defined if SCC3 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for +[(BSP--SCC3 UART IF mode) Must be defined if SCC3 is used as a tty (UART) + channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) RTEMS_BSPOPTS_SET([CONS_SCC4_MODE],[*],[CONS_MODE_UNUSED]) RTEMS_BSPOPTS_HELP([CONS_SCC4_MODE], -[(BSP--SCC4 UART IF mode) Must be defined if SCC4 is used as a tty (UART) - channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for +[(BSP--SCC4 UART IF mode) Must be defined if SCC4 is used as a tty (UART) + channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used]) # add selection of primary network interface @@ -103,7 +103,7 @@ RTEMS_BSPOPTS_HELP([BSP_USE_NETWORK_SCC], for 10MBit networking.]) -# Explicitly list a Makefile here +# Explicitly list a Makefile here AC_CONFIG_FILES([Makefile]) RTEMS_BSP_CLEANUP_OPTIONS(0, 0) |