1 files changed, 0 insertions, 97 deletions
diff --git a/c/src/lib/libbsp/powerpc/ss555/startup/bspstart.c b/c/src/lib/libbsp/powerpc/ss555/startup/bspstart.c
deleted file mode 100644
index f47ca7d5be..0000000000
--- a/c/src/lib/libbsp/powerpc/ss555/startup/bspstart.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- *  This routine does the bulk of the system initialization.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2007.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- *
- *  SS555 port sponsored by Defence Research and Development Canada - Suffield
- *  Copyright (C) 2004, Real-Time Systems Inc. (querbach@realtime.bc.ca)
- *
- *  Derived from c/src/lib/libbsp/powerpc/mbx8xx/startup/bspstart.c:
- *
- *  Modifications for MBX860:
- *  Copyright (c) 1999, National Research Council of Canada
- */
-
-#include <rtems/bspIo.h>
-#include <rtems/counter.h>
-#include <bsp/bootcard.h>
-#include <rtems/powerpc/powerpc.h>
-
-#include <libcpu/cpuIdent.h>
-#include <libcpu/spr.h>
-
-#include <bsp/irq.h>
-#include <bsp.h>
-
-SPR_RW(SPRG1)
-
-extern unsigned long intrStackPtr;
-
-/*
- *  Driver configuration parameters
- */
-uint32_t   bsp_clicks_per_usec;
-uint32_t   bsp_clock_speed;	       /* Serial clocks per second */
-
-/*
- *  bsp_start()
- *
- *  Board-specific initialization code. Called from the generic boot_card()
- *  function defined in rtems/c/src/lib/libbsp/shared/main.c. That function
- *  does some of the board independent initialization. It is called from the
- *  SS555 entry point _start() defined in
- *  rtems/c/src/lib/libbsp/powerpc/ss555/start/start.S
- *
- *  _start() has set up a stack, has zeroed the .bss section, has set up the
- *  .data section from contents stored in ROM, has turned off interrupts,
- *  and placed the processor in the supervisor mode.  boot_card() has left
- *  the processor in that state when bsp_start() was called.
- *
- *  Input parameters: NONE
- *
- *  Output parameters: NONE
- *
- *  Return values: NONE
- */
-void bsp_start(void)
-{
-  register unsigned char* intrStack;
-
-  /*
-   * Get CPU identification dynamically.  Note that the get_ppc_cpu_type()
-   * function stores the result in global variables so that it can be used
-   * later.
-   */
-  get_ppc_cpu_type();
-  get_ppc_cpu_revision();
-
-  /*
-   * Initialize some SPRG registers related to irq handling
-   */
-  intrStack = (((unsigned char*)&intrStackPtr) - PPC_MINIMUM_STACK_FRAME_SIZE);
-  _write_SPRG1((unsigned int)intrStack);
-
-  /*
-   * Install our own set of exception vectors
-   */
-  initialize_exceptions();
-
-  /*
-   *  initialize the device driver parameters
-   */
-  bsp_clicks_per_usec = BSP_CRYSTAL_HZ / 4 / 1000000;
-  bsp_clock_speed     = BSP_CLOCK_HZ;	/* for SCI baud rate generator */
-  rtems_counter_initialize_converter(BSP_CRYSTAL_HZ / 4);
-
-  /*
-   * Initalize RTEMS IRQ system
-   */
-  BSP_rtems_irq_mng_init(0);
-}