1 files changed, 0 insertions, 106 deletions
diff --git a/c/src/lib/libbsp/powerpc/shared/startup/ppc_idle.c b/c/src/lib/libbsp/powerpc/shared/startup/ppc_idle.c
deleted file mode 100644
index 44ae87311c..0000000000
--- a/c/src/lib/libbsp/powerpc/shared/startup/ppc_idle.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- *  ppc_idle.c
- *
- * Authorship
- * ----------
- * This software was created by
- *     Till Straumann <strauman@slac.stanford.edu>, 2010,
- * 	   Stanford Linear Accelerator Center, Stanford University.
- *
- * Acknowledgement of sponsorship
- * ------------------------------
- * This software was produced by
- *     the Stanford Linear Accelerator Center, Stanford University,
- * 	   under Contract DE-AC03-76SFO0515 with the Department of Energy.
- *
- * Government disclaimer of liability
- * ----------------------------------
- * Neither the United States nor the United States Department of Energy,
- * nor any of their employees, makes any warranty, express or implied, or
- * assumes any legal liability or responsibility for the accuracy,
- * completeness, or usefulness of any data, apparatus, product, or process
- * disclosed, or represents that its use would not infringe privately owned
- * rights.
- *
- * Stanford disclaimer of liability
- * --------------------------------
- * Stanford University makes no representations or warranties, express or
- * implied, nor assumes any liability for the use of this software.
- *
- * Stanford disclaimer of copyright
- * --------------------------------
- * Stanford University, owner of the copyright, hereby disclaims its
- * copyright and all other rights in this software.  Hence, anyone may
- * freely use it for any purpose without restriction.
- *
- * Maintenance of notices
- * ----------------------
- * In the interest of clarity regarding the origin and status of this
- * SLAC software, this and all the preceding Stanford University notices
- * are to remain affixed to any copy or derivative of this software made
- * or distributed by the recipient and are to be affixed to any copy of
- * software made or distributed by the recipient that contains a copy or
- * derivative of this software.
- *
- * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
- */
-#include <bsp.h>
-#include <stdint.h>
-
-#ifdef BSP_IDLE_TASK_BODY
-
-/* Provide an idle-task body which switches the
- * CPU into power-save mode when idle. Any exception
- * (including an interrupt/external-exception)
- * wakes it up.
- *
- * IIRC - this cannot be used on real hardware due
- *        to errata on many chips which is a real
- *        pity. However, when used under qemu it
- *        saves host-CPU cycles.
- *        While qemu-0.12.4 needed to be patched
- *        (would otherwise hang because an exception
- *        didn't clear MSR_POW) qemu-0.14.1 seems
- *        to work fine.
- */
-
-#include <rtems/powerpc/registers.h>
-#include <libcpu/cpuIdent.h>
-#include <libcpu/spr.h>
-
-SPR_RW(HID0)
-
-void *
-bsp_ppc_idle_task_body(uintptr_t ignored)
-{
-uint32_t msr;
-
-	switch ( current_ppc_cpu ) {
-
-		case PPC_7400:
-		case PPC_7455:
-		case PPC_7457:
-			/* Must enable NAP mode in HID0 for MSR_POW to work */
-			_write_HID0( _read_HID0() | HID0_NAP );
-		break;
-
-		default:
-		break;
-	}
-
-	for ( ;; ) {
-		_CPU_MSR_GET(msr);
-		msr |= MSR_POW;
-		asm volatile(
-				"1: sync       \n"
-				"	mtmsr %0   \n"
-				"   isync      \n"
-				"   b 1b       \n"
-				::"r"(msr)
-				);
-	}
-
-	return 0;
-}
-
-#endif