1 files changed, 0 insertions, 95 deletions
diff --git a/c/src/lib/libbsp/powerpc/shared/bootloader/pci.h b/c/src/lib/libbsp/powerpc/shared/bootloader/pci.h
deleted file mode 100644
index 4281a13090..0000000000
--- a/c/src/lib/libbsp/powerpc/shared/bootloader/pci.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *	PCI defines and function prototypes
- *	Copyright 1994, Drew Eckhardt
- *	Copyright 1997, 1998 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
- *
- *	For more information, please consult the following manuals (look at
- *	http://www.pcisig.com/ for how to get them):
- *
- *	PCI BIOS Specification
- *	PCI Local Bus Specification
- *	PCI to PCI Bridge Specification
- *	PCI System Design Guide
- */
-
-#ifndef BOOTLOADER_PCI_H
-#define BOOTLOADER_PCI_H
-
-#include <rtems/pci.h>
-
-
-/* Functions used to access pci configuration space */
-struct pci_bootloader_config_access_functions {
-        int (*read_config_byte)(unsigned char, unsigned char,
-                               unsigned char, uint8_t *);
-        int (*read_config_word)(unsigned char, unsigned char,
-                               unsigned char, uint16_t *);
-        int (*read_config_dword)(unsigned char, unsigned char,
-                               unsigned char, uint32_t *);
-        int (*write_config_byte)(unsigned char, unsigned char,
-                               unsigned char, uint8_t);
-        int (*write_config_word)(unsigned char, unsigned char,
-                               unsigned char, uint16_t);
-        int (*write_config_dword)(unsigned char, unsigned char,
-                               unsigned char, uint32_t);
-};
-
-/*
- * There is one pci_dev structure for each slot-number/function-number
- * combination:
- */
-struct pci_dev {
-	struct pci_bus	*bus;		/* bus this device is on */
-	struct pci_dev	*sibling;	/* next device on this bus */
-	struct pci_dev	*next;		/* chain of all devices */
-
-	void		*sysdata;	/* hook for sys-specific extension */
-	struct proc_dir_entry *procent;	/* device entry in /proc/bus/pci */
-
-	unsigned int	devfn;		/* encoded device & function index */
-	unsigned short	vendor;
-	unsigned short	device;
-	unsigned int	class;		/* 3 bytes: (base,sub,prog-if) */
-	unsigned int	hdr_type;	/* PCI header type */
-	unsigned int	master : 1;	/* set if device is master capable */
-	/*
-	 * In theory, the irq level can be read from configuration
-	 * space and all would be fine.  However, old PCI chips don't
-	 * support these registers and return 0 instead.  For example,
-	 * the Vision864-P rev 0 chip can uses INTA, but returns 0 in
-	 * the interrupt line and pin registers.  pci_init()
-	 * initializes this field with the value at PCI_INTERRUPT_LINE
-	 * and it is the job of pcibios_fixup() to change it if
-	 * necessary.  The field must not be 0 unless the device
-	 * cannot generate interrupts at all.
-	 */
-	unsigned int	irq;		/* irq generated by this device */
-
-	/* Base registers for this device, can be adjusted by
-	 * pcibios_fixup() as necessary.
-	 */
-	unsigned long	base_address[6];
-	unsigned long	rom_address;
-};
-
-struct pci_bus {
-	struct pci_bus	*parent;	/* parent bus this bridge is on */
-	struct pci_bus	*children;	/* chain of P2P bridges on this bus */
-	struct pci_bus	*next;		/* chain of all PCI buses */
-
-	struct pci_dev	*self;		/* bridge device as seen by parent */
-	struct pci_dev	*devices;	/* devices behind this bridge */
-
-	void		*sysdata;	/* hook for sys-specific extension */
-	struct proc_dir_entry *procdir;	/* directory entry in /proc/bus/pci */
-
-	unsigned char	number;		/* bus number */
-	unsigned char	primary;	/* number of primary bridge */
-	unsigned char	secondary;	/* number of secondary bridge */
-	unsigned char	subordinate;	/* max number of subordinate buses */
-};
-
-extern struct pci_bus	pci_root;	/* root bus */
-extern struct pci_dev	*pci_devices;	/* list of all devices */
-
-#endif /* BOOTLOADER_PCI_H */