diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in')
-rw-r--r-- | c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in | 101 |
1 files changed, 0 insertions, 101 deletions
diff --git a/c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in b/c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in deleted file mode 100644 index 2a9909d414..0000000000 --- a/c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in +++ /dev/null @@ -1,101 +0,0 @@ -/* include/bspopts.h.in. Generated from configure.ac by autoheader. */ - -/* default baud for console and other serial devices */ -#undef BSP_CONSOLE_BAUD - -/* enables the data cache, if defined to a value other than zero */ -#undef BSP_DATA_CACHE_ENABLED - -/* If defined, then the BSP Framework will put a non-zero pattern into the - RTEMS Workspace and C program heap. This should assist in finding code that - assumes memory starts set to zero. */ -#undef BSP_DIRTY_MEMORY - -/* disable U-Boot work area configuration */ -#undef BSP_DISABLE_UBOOT_WORK_AREA_CONFIG - -/* enables the instruction cache, if defined to a value other than zero */ -#undef BSP_INSTRUCTION_CACHE_ENABLED - -/* indicate that the interrupt stack is at the work area begin */ -#undef BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN - -/* If defined, print a message and wait until pressed before resetting board - when application exits. */ -#undef BSP_PRESS_KEY_FOR_RESET - -/* If defined, reset the board when the application exits. */ -#undef BSP_RESET_BOARD_AT_EXIT - -/* if defined use dcbt instruction */ -#undef BSP_USE_DATA_CACHE_BLOCK_TOUCH - -/* enable usage of interrupts for the UART modules */ -#undef BSP_USE_UART_INTERRUPTS - -/* enables U-Boot support */ -#undef HAS_UBOOT - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* global timer used for system clock, 0..3 maps to A0..A3, and 4..7 maps to - B0..B3 */ -#undef QORIQ_CLOCK_TIMER - -/* PHY address for eTSEC interface 1 */ -#undef QORIQ_ETSEC_1_PHY_ADDR - -/* PHY address for eTSEC interface 2 */ -#undef QORIQ_ETSEC_2_PHY_ADDR - -/* PHY address for eTSEC interface 3 */ -#undef QORIQ_ETSEC_3_PHY_ADDR - -/* initial MSR value */ -#undef QORIQ_INITIAL_MSR - -/* initial SPEFSCR value */ -#undef QORIQ_INITIAL_SPEFSCR - -/* inter-processor communication area begin */ -#undef QORIQ_INTERCOM_AREA_BEGIN - -/* inter-processor communication area size */ -#undef QORIQ_INTERCOM_AREA_SIZE - -/* use 1 to enable UART 0, otherwise use 0 */ -#undef QORIQ_UART_0_ENABLE - -/* use 1 to enable UART 1, otherwise use 0 */ -#undef QORIQ_UART_1_ENABLE - -/* use 1 to enable UART 0 to Intercom bridge, otherwise use 0 */ -#undef QORIQ_UART_BRIDGE_0_ENABLE - -/* use 1 to enable UART 1 to Intercom bridge, otherwise use 0 */ -#undef QORIQ_UART_BRIDGE_1_ENABLE - -/* UART to Intercom bridge master core index */ -#undef QORIQ_UART_BRIDGE_MASTER_CORE - -/* UART to Intercom bridge slave core index */ -#undef QORIQ_UART_BRIDGE_SLAVE_CORE - -/* UART to Intercom bridge task priority */ -#undef QORIQ_UART_BRIDGE_TASK_PRIORITY |