1 files changed, 0 insertions, 121 deletions
diff --git a/c/src/lib/libbsp/powerpc/qemuppc/startup/bspstart.c b/c/src/lib/libbsp/powerpc/qemuppc/startup/bspstart.c
deleted file mode 100644
index 94d7f4b84d..0000000000
--- a/c/src/lib/libbsp/powerpc/qemuppc/startup/bspstart.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  This set of routines starts the application.  It includes application,
- *  board, and monitor specific initialization and configuration.
- *  The generic CPU dependent initialization has been performed
- *  before any of these are invoked.
- *
- *  COPYRIGHT (c) 1989-2008.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <string.h>
-#include <fcntl.h>
-
-#include <rtems/counter.h>
-
-#include <libcpu/bat.h>
-#include <libcpu/spr.h>
-#include <libcpu/powerpc-utility.h>
-
-#include <bsp.h>
-#include <bsp/irq.h>
-#include <bsp/vectors.h>
-#include <bsp/bootcard.h>
-#include <bsp/irq-generic.h>
-
-/*
- * CPU Bus Frequency
- */
-unsigned int BSP_bus_frequency;
-
-/* Configuration parameter for clock driver */
-uint32_t bsp_time_base_frequency;
-
-/* Legacy */
-uint32_t bsp_clicks_per_usec;
-
-/*
- * Memory on this board.
- */
-extern char RamSize[];
-extern char bsp_interrupt_stack_start[];
-extern char bsp_interrupt_stack_end[];
-uint32_t BSP_mem_size = (uint32_t)RamSize;
-
-/* Default decrementer exception handler */
-static int default_decrementer_exception_handler( BSP_Exception_frame *frame, unsigned number)
-{
-  ppc_set_decrementer_register(UINT32_MAX);
-
-  return 0;
-}
-
-/*
- *  bsp_start
- *
- *  This routine does the bulk of the system initialization.
- */
-
-void bsp_start( void )
-{
-  rtems_status_code sc = RTEMS_SUCCESSFUL;
-  uintptr_t intrStackStart;
-  uintptr_t intrStackSize;
-
-  /*
-   * Note we can not get CPU identification dynamically, so
-   * force current_ppc_cpu.
-   */
-  current_ppc_cpu = PPC_PSIM;
-
-  /*
-   *  initialize the device driver parameters
-   * assume we are running with 20MHz bus
-   * this should speed up some tests :-)
-   */
-  BSP_bus_frequency        = 20;
-  bsp_time_base_frequency  = 20000000;
-  bsp_clicks_per_usec      = BSP_bus_frequency;
-  rtems_counter_initialize_converter(bsp_time_base_frequency);
-
-  /*
-   * Initialize the interrupt related settings.
-   */
-  intrStackStart = (uintptr_t) bsp_interrupt_stack_start;
-  intrStackSize =  (uintptr_t) bsp_interrupt_stack_end - intrStackStart;
-
-  BSP_mem_size = (uint32_t )RamSize;
-
-  /*
-   * Initialize default raw exception handlers.
-   */
-  ppc_exc_initialize(intrStackStart, intrStackSize);
-
-  /* Install default handler for the decrementer exception */
-  sc = ppc_exc_set_handler( ASM_DEC_VECTOR, default_decrementer_exception_handler);
-  if (sc != RTEMS_SUCCESSFUL) {
-    rtems_panic("cannot install decrementer exception handler");
-  }
-
-  /* Initalize interrupt support */
-  bsp_interrupt_initialize();
-
-#if 0
-  /*
-   * Setup BATs and enable MMU
-   */
-  /* Memory */
-  setdbat(0, 0x0<<24, 0x0<<24, 2<<24, _PAGE_RW);
-  setibat(0, 0x0<<24, 0x0<<24, 2<<24,        0);
-  /* PCI    */
-  setdbat(1, 0x8<<24, 0x8<<24, 1<<24,  IO_PAGE);
-  setdbat(2, 0xc<<24, 0xc<<24, 1<<24,  IO_PAGE);
-
-  _write_MSR(_read_MSR() | MSR_DR | MSR_IR);
-  __asm__ volatile("sync; isync");
-#endif
-}