diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/ppcn_60x/console/config.c')
-rw-r--r-- | c/src/lib/libbsp/powerpc/ppcn_60x/console/config.c | 487 |
1 files changed, 0 insertions, 487 deletions
diff --git a/c/src/lib/libbsp/powerpc/ppcn_60x/console/config.c b/c/src/lib/libbsp/powerpc/ppcn_60x/console/config.c deleted file mode 100644 index 20841c84af..0000000000 --- a/c/src/lib/libbsp/powerpc/ppcn_60x/console/config.c +++ /dev/null @@ -1,487 +0,0 @@ -/* - * This file contains the TTY driver table for the PPCn_60x - * - * COPYRIGHT (c) 1998 by Radstone Technology - * - * - * THIS FILE IS PROVIDED TO YOU, THE USER, "AS IS", WITHOUT WARRANTY OF ANY - * KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK - * AS TO THE QUALITY AND PERFORMANCE OF ALL CODE IN THIS FILE IS WITH YOU. - * - * You are hereby granted permission to use, copy, modify, and distribute - * this file, provided that this notice, plus the above copyright notice - * and disclaimer, appears in all copies. Radstone Technology will provide - * no support for this code. - * - * $Id$ - */ - -#include <libchip/serial.h> -#include <libchip/mc68681.h> -#include <libchip/z85c30.h> -#include "i8042vga.h" - -#include "ns16550cfg.h" -#include "z85c30cfg.h" - -#include <pci.h> - -#define PMX1553_BUS 2 -#define PMX1553_SLOT 1 - -/* - * Based on BSP configuration information decide whether to do polling IO - * or interrupt driven IO. - */ - -#if (CONSOLE_USE_INTERRUPTS) -#define NS16550_FUNCTIONS &ns16550_fns -#define Z85C30_FUNCTIONS &z85c30_fns -#else -#define NS16550_FUNCTIONS &ns16550_fns_polled -#define Z85C30_FUNCTIONS &z85c30_fns_polled -#endif - -/* - * Configuration specific probe routines - */ -static boolean config_PMX1553_probe(int minor); -static boolean config_z85c30_probe(int minor); - -/* - * The following table configures the console drivers used in this BSP. - * - * The first entry which, when probed, is available, will be named /dev/console, - * all others being given the name indicated. - * - * Each field is interpreted thus: - * - * sDeviceName This is the name of the device. - * pDeviceFns This is a pointer to the set of driver routines to use. - * pDeviceFlow This is a pointer to the set of flow control routines to - * use. Serial device drivers will typically supply RTSCTS - * and DTRCTS handshake routines for DCE to DCE communication, - * however for DCE to DTE communication, no such routines - * should be necessary as RTS will be driven automatically - * when the transmitter is active. - * ulMargin The high water mark in the input buffer is set to the buffer - * size less ulMargin. Once this level is reached, the driver's - * flow control routine used to stop the remote transmitter will - * be called. This figure should be greater than or equal to - * the number of stages of FIFO between the transmitter and - * receiver. - * ulHysteresis After the high water mark specified by ulMargin has been - * reached, the driver's routine to re-start the remote - * transmitter will be called once the level in the input - * buffer has fallen by ulHysteresis bytes. - * pDeviceParams This contains either device specific data or a pointer to a - * device specific structure containing additional information - * not provided in this table. - * ulCtrlPort1 This is the primary control port number for the device. This - * may be used to specify different instances of the same device - * type. - * ulCtrlPort2 This is the secondary control port number, of use when a given - * device has more than one available channel. - * ulDataPort This is the port number for the data port of the device - * ulIntVector This encodes the interrupt vector of the device. - * - */ -console_tbl Console_Port_Tbl[] = { - { - "/dev/vga", /* sDeviceName */ - SERIAL_CUSTOM, /* deviceType */ - &i8042vga_fns, /* pDeviceFns */ - NULL, /* deviceProbe */ - NULL, /* pDeviceFlow */ - 0, /* ulMargin */ - 0, /* ulHysteresis */ - (void *)0, /* pDeviceParams */ - I8042_CS, /* ulCtrlPort1 */ - 0, /* ulCtrlPort2 */ - I8042_DATA, /* ulDataPort */ - Read_ns16550_register, /* getRegister */ - Write_ns16550_register, /* setRegister */ - NULL, /* getData */ - NULL, /* setData */ - 0, /* ulClock */ - PPCN_60X_IRQ_KBD /* ulIntVector */ - }, - { - "/dev/com1", /* sDeviceName */ - SERIAL_NS16550, /* deviceType */ - NS16550_FUNCTIONS, /* pDeviceFns */ - NULL, /* deviceProbe */ - &ns16550_flow_RTSCTS, /* pDeviceFlow */ - 16, /* ulMargin */ - 8, /* ulHysteresis */ - (void *)9600, /* baud rate */ /* pDeviceParams */ - NS16550_PORT_A, /* ulCtrlPort1 */ - 0, /* ulCtrlPort2 */ - NS16550_PORT_A, /* ulDataPort */ - Read_ns16550_register, /* getRegister */ - Write_ns16550_register, /* setRegister */ - NULL, /* getData */ - NULL, /* setData */ - 0, /* ulClock */ - PPCN_60X_IRQ_COM1 /* ulIntVector */ - }, - { - "/dev/ser1", /* sDeviceName */ - SERIAL_NS16550, /* deviceType */ - NS16550_FUNCTIONS, /* pDeviceFns */ - config_PMX1553_probe, /* deviceProbe */ - &ns16550_flow_RTSCTS, /* pDeviceFlow */ - 80, /* ulMargin */ - 8, /* ulHysteresis */ - (void *)9600, /* baud rate */ /* pDeviceParams */ - PMX1553_BUS, /* PCI bus */ /* ulCtrlPort1 */ - PMX1553_SLOT, /* PCI slot */ /* ulCtrlPort2 */ - 1, /* Channel 1-4 */ /* ulDataPort */ - NULL, /* getRegister */ - NULL, /* setRegister */ - NULL, /* getData */ - NULL, /* setData */ - 0, /* ulClock */ - 0 /* RS232 */ /* ulIntVector */ - }, - { - "/dev/ser2", /* sDeviceName */ - SERIAL_NS16550, /* deviceType */ - NS16550_FUNCTIONS, /* pDeviceFns */ - config_PMX1553_probe, /* deviceProbe */ - &ns16550_flow_RTSCTS, /* pDeviceFlow */ - 80, /* ulMargin */ - 8, /* ulHysteresis */ - (void *)9600, /* baud rate */ /* pDeviceParams */ - PMX1553_BUS, /* PCI bus */ /* ulCtrlPort1 */ - PMX1553_SLOT, /* PCI slot */ /* ulCtrlPort2 */ - 2, /* Channel 1-4 */ /* ulDataPort */ - Read_ns16550_register, /* getRegister */ - Write_ns16550_register, /* setRegister */ - NULL, /* getData */ - NULL, /* setData */ - 0, /* ulClock */ - 0 /* RS232 */ /* ulIntVector */ - }, - { - "/dev/ser3", /* sDeviceName */ - SERIAL_NS16550, /* deviceType */ - NS16550_FUNCTIONS, /* pDeviceFns */ - config_PMX1553_probe, /* deviceProbe */ - &ns16550_flow_RTSCTS, /* pDeviceFlow */ - 96, /* ulMargin */ - 8, /* ulHysteresis */ - (void *)57600, /* baud rate */ /* pDeviceParams */ - PMX1553_BUS, /* PCI bus */ /* ulCtrlPort1 */ - PMX1553_SLOT, /* PCI slot */ /* ulCtrlPort2 */ - 3, /* Channel 1-4 */ /* ulDataPort */ - Read_ns16550_register, /* getRegister */ - Write_ns16550_register, /* setRegister */ - NULL, /* getData */ - NULL, /* setData */ - 0, /* ulClock */ - 0 /* RS232 */ /* ulIntVector */ - }, - { - "/dev/ser4", /* sDeviceName */ - SERIAL_NS16550, /* deviceType */ - NS16550_FUNCTIONS, /* pDeviceFns */ - config_PMX1553_probe, /* deviceProbe */ - &ns16550_flow_RTSCTS, /* pDeviceFlow */ - 96, /* ulMargin */ - 8, /* ulHysteresis */ - (void *)57600, /* baud rate */ /* pDeviceParams */ - PMX1553_BUS, /* PCI bus */ /* ulCtrlPort1 */ - PMX1553_SLOT, /* PCI slot */ /* ulCtrlPort2 */ - 4, /* Channel 1-4 */ /* ulDataPort */ - Read_ns16550_register, /* getRegister */ - Write_ns16550_register, /* setRegister */ - NULL, /* getData */ - NULL, /* setData */ - 0, /* ulClock */ - 0 /* RS232 */ /* ulIntVector */ - }, -#if !PPCN_60X_USE_DINK - { - "/dev/com2", /* sDeviceName */ - SERIAL_NS16550, /* deviceType */ - NS16550_FUNCTIONS, /* pDeviceFns */ - NULL, /* deviceProbe */ - &ns16550_flow_RTSCTS, /* pDeviceFlow */ - 16, /* ulMargin */ - 8, /* ulHysteresis */ - (void *)9600, /* baud rate */ /* pDeviceParams */ - NS16550_PORT_B, /* ulCtrlPort1 */ - 0, /* ulCtrlPort2 */ - NS16550_PORT_B, /* ulDataPort */ - Read_ns16550_register, /* getRegister */ - Write_ns16550_register, /* setRegister */ - NULL, /* getData */ - NULL, /* setData */ - 0, /* ulClock */ - PPCN_60X_IRQ_COM2 /* ulIntVector */ - }, -#endif - { - "/dev/com3", /* sDeviceName */ - SERIAL_Z85C30, /* deviceType */ - Z85C30_FUNCTIONS, /* pDeviceFns */ - config_z85c30_probe, /* deviceProbe */ - &z85c30_flow_RTSCTS, /* pDeviceFlow */ - 16, /* ulMargin */ - 8, /* ulHysteresis */ - (void *)9600, /* baud rate */ /* pDeviceParams */ - Z85C30_CTRL_A, /* ulCtrlPort1 */ - Z85C30_CTRL_A, /* ulCtrlPort2 */ - Z85C30_DATA_A, /* ulDataPort */ - Read_85c30_register, /* getRegister */ - Write_85c30_register, /* setRegister */ - Read_85c30_data, /* getData */ - Write_85c30_data, /* setData */ - 0, /* ulClock */ - PPCN_60X_IRQ_COM3_4 /* ulIntVector */ - }, - { - "/dev/com4", /* sDeviceName */ - SERIAL_Z85C30, /* deviceType */ - Z85C30_FUNCTIONS, /* pDeviceFns */ - config_z85c30_probe, /* deviceProbe */ - &z85c30_flow_RTSCTS, /* pDeviceFlow */ - 16, /* ulMargin */ - 8, /* ulHysteresis */ - (void *)9600, /* baud rate */ /* pDeviceParams */ - Z85C30_CTRL_B, /* ulCtrlPort1 */ - Z85C30_CTRL_A, /* ulCtrlPort2 */ - Z85C30_DATA_B, /* ulDataPort */ - Read_85c30_register, /* getRegister */ - Write_85c30_register, /* setRegister */ - Read_85c30_data, /* getData */ - Write_85c30_data, /* setData */ - 0, /* ulClock */ - PPCN_60X_IRQ_COM3_4 /* ulIntVector */ - } -}; - -/* - * Define serial port write registers structure. - */ -typedef volatile struct _SP_WRITE_REGISTERS { - unsigned char TransmitBuffer; - unsigned char InterruptEnable; - unsigned char FifoControl; - unsigned char LineControl; - unsigned char ModemControl; - unsigned char Reserved1; - unsigned char ModemStatus; - unsigned char ScratchPad; -} SP_WRITE_REGISTERS, *PSP_WRITE_REGISTERS; - -static boolean config_PMX1553_probe(int minor) -{ - uint8_t ucBusNumber, ucSlotNumber, ucChannel; - uint8_t ucIntLine; - uint32_t ulPortBase, ulMemBase, ulDeviceID, ulTemp; - uint8_t *pucSIO_cir, *pucUart_int_sr, *pucUartDevIntReg; - PSP_WRITE_REGISTERS pNS16550Write; - - /* - * Extract PCI bus/slot and channel number - */ - ucBusNumber=Console_Port_Tbl[minor].ulCtrlPort1; - ucSlotNumber=Console_Port_Tbl[minor].ulCtrlPort2; - ucChannel=Console_Port_Tbl[minor].ulDataPort; - - PCIConfigRead32(ucBusNumber, - ucSlotNumber, - 0, - PCI_CONFIG_VENDOR_LOW, - &ulDeviceID); - - if(ulDeviceID!=0x000111b5) - { - return FALSE; - } - - /* - * At this point we know we have a PMC1553 or PMX1553 card - * - * Check for PMX1553 uart legacy IO ports - */ - PCIConfigRead32(ucBusNumber, - ucSlotNumber, - 0, - PCI_CONFIG_BAR_3, - &ulPortBase); - - if(ulPortBase==0) - { - /* - * This is either a PMC1553 or we can't see the uart - * registers - */ - return FALSE; - } - - PCIConfigRead32(ucBusNumber, - ucSlotNumber, - 0, - PCI_CONFIG_BAR_2, - &ulMemBase); - - pucUartDevIntReg=(uint8_t*)(PCI_MEM_BASE+ulMemBase); - pucUart_int_sr=(uint8_t*)(PCI_MEM_BASE+ulMemBase+0x10); - pucSIO_cir=(uint8_t*)(PCI_MEM_BASE+ulMemBase+0x18); - - /* - * Use ulIntVector field to select RS232/RS422 - */ - if(Console_Port_Tbl[minor].ulIntVector==0) - { - /* - * Select RS232 mode - */ - *pucSIO_cir&=~(1<<(ucChannel-1)); - } - else - { - /* - * Select RS422 mode - */ - *pucSIO_cir|=1<<(ucChannel-1); - } - EIEIO; - /* - * Bring device out of reset - */ - *pucSIO_cir&=0xbf; - EIEIO; - /* - * Enable all channels as active - */ - *pucSIO_cir|=0x10; - EIEIO; - *pucSIO_cir&=0xdf; - - PCIConfigRead8(ucBusNumber, - ucSlotNumber, - 0, - PCI_CONFIG_INTERRUPTLINE, - &ucIntLine); - - ulPortBase&=~PCI_ADDRESS_IO_SPACE; - - ulPortBase+=8*(ucChannel-1); - - Console_Port_Tbl[minor].ulCtrlPort1= - Console_Port_Tbl[minor].ulDataPort=ulPortBase; - if(Console_Port_Tbl[minor].pDeviceFns!=&ns16550_fns_polled) - { - Console_Port_Tbl[minor].ulIntVector=PPCN_60X_IRQ_PCI(ucIntLine); - - /* - * Enable interrupt - */ - *pucUart_int_sr=(~*pucUart_int_sr)&(0x08<<ucChannel); - - /* - * Enable interrupt to PCI - */ - *pucUartDevIntReg=(~*pucUartDevIntReg)&0x80; - } - else - { - /* - * Disable interrupt - */ - *pucUart_int_sr&=(0x08<<ucChannel); - } - - /* - * Enable Auto CTS to facilitate flow control - */ - pNS16550Write=(PSP_WRITE_REGISTERS)Console_Port_Tbl[minor].ulCtrlPort1; - /* - * Enable special register set and unlock Enhanced Feature Register - */ - outport_byte(&pNS16550Write->LineControl, 0xbf); - /* - * Unlock enhanced function bits - */ - outport_byte(&pNS16550Write->FifoControl, 0x10); - /* - * Disable special register set and lock Enhanced Feature Register - */ - outport_byte(&pNS16550Write->LineControl, 0); - /* - * Select div 1 - */ - outport_byte(&pNS16550Write->ModemControl, 0x00); - /* - * Enable special register set and unlock Enhanced Feature Register - */ - outport_byte(&pNS16550Write->LineControl, 0xbf); - /* - * Lock enhanced function bits and enable auto CTS - */ - outport_byte(&pNS16550Write->FifoControl, 0x80); - /* - * Disable special register set and lock Enhanced Feature Register - */ - outport_byte(&pNS16550Write->LineControl, 0); - - /* - * The PMX1553 currently uses a 16 MHz clock rather than the - * 7.3728 MHz clock described in the ST16C654 data sheet. When - * available, 22.1184 MHz will be used allowing rates up to - * 1382400 baud (RS422 only). - */ - - ulTemp = (uint32_t)Console_Port_Tbl[minor].pDeviceParams; -#if 1 - /* - * Scale requested baud rate for 16 MHz clock - */ - ulTemp *= 7373; - ulTemp /= 16000; -#else - /* - * Scale requested baud rate for 22.1184 MHz clock - */ - ulTemp /= 3; -#endif - - /* - * In order to maintain maximum data rate accuracy, we will - * apply a div 4 here rather than in hardware (using MCR bit 7). - */ - ulTemp /= 4; - - Console_Port_Tbl[minor].pDeviceParams = (void *)ulTemp; - - return(TRUE); -} - -static boolean config_z85c30_probe(int minor) -{ - /* - * PPC1 and PPC1a do not have this device - */ - if((ucSystemType==SYS_TYPE_PPC1) || - (ucSystemType==SYS_TYPE_PPC1a)) - { - return (FALSE); - } - - /* - * All other boards supported by this BSP have the z85c30 device - */ - - /* - * Ensure that CIO port B is configured for - * default driver enable - */ - outport_byte(0x861, 0x33); - - return(TRUE); -} |