diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/mvme2307/shmsupp')
-rw-r--r-- | c/src/lib/libbsp/powerpc/mvme2307/shmsupp/Makefile.in | 70 | ||||
-rw-r--r-- | c/src/lib/libbsp/powerpc/mvme2307/shmsupp/addrconv.c | 31 | ||||
-rw-r--r-- | c/src/lib/libbsp/powerpc/mvme2307/shmsupp/getcfg.c | 77 | ||||
-rw-r--r-- | c/src/lib/libbsp/powerpc/mvme2307/shmsupp/lock.c | 86 | ||||
-rw-r--r-- | c/src/lib/libbsp/powerpc/mvme2307/shmsupp/mpisr.c | 47 |
5 files changed, 311 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/Makefile.in new file mode 100644 index 0000000000..9ecd5ed03b --- /dev/null +++ b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/Makefile.in @@ -0,0 +1,70 @@ +# +# $Id$ +# + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +top_builddir = ../../../.. +subdir = libbsp/powerpc/mvme2307/shmsupp + +RTEMS_ROOT = @RTEMS_ROOT@ +PROJECT_ROOT = @PROJECT_ROOT@ + +VPATH = @srcdir@ + +PGM=${ARCH}/shmsupp.rel + +# C source names, if any, go here -- minus the .c +C_PIECES=addrconv getcfg lock mpisr +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .S +S_PIECES= +S_FILES=$(S_PIECES:%=%.S) +S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(RTEMS_ROOT)/make/leaf.cfg + +INSTALL_CHANGE = @INSTALL_CHANGE@ + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +LD_PATHS += +LD_LIBS += +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += +CLOBBER_ADDITIONS += + +${PGM}: ${SRCS} ${OBJS} + $(make-rel) + +all: ${ARCH} $(SRCS) $(PGM) + +# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile +install: all + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/addrconv.c b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/addrconv.c new file mode 100644 index 0000000000..95b44d95fd --- /dev/null +++ b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/addrconv.c @@ -0,0 +1,31 @@ +/* Shm_Convert_address + * + * No address range conversion is required. + * + * Input parameters: + * address - address to convert + * + * Output parameters: + * returns - converted address + * + * COPYRIGHT (c) 1989-1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + */ + +#include <rtems.h> +#include <bsp.h> +#include <shm.h> + +void *Shm_Convert_address( + void *address +) +{ + return ( address ); +} diff --git a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/getcfg.c b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/getcfg.c new file mode 100644 index 0000000000..587345df83 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/getcfg.c @@ -0,0 +1,77 @@ +/* void Shm_Get_configuration( localnode, &shmcfg ) + * + * This routine initializes, if necessary, and returns a pointer + * to the Shared Memory Configuration Table for the XXX target. + * + * INPUT PARAMETERS: + * localnode - local node number + * shmcfg - address of pointer to SHM Config Table + * + * OUTPUT PARAMETERS: + * *shmcfg - pointer to SHM Config Table + * +XXX: FIX THE COMMENTS BELOW WHEN THE CPU IS KNOWN + * NOTES: The XYZ does not have an interprocessor interrupt. + * + * The following table illustrates the configuration limitations: + * + * BUS MAX + * MODE ENDIAN NODES + * ========= ====== ======= + * POLLED BIG 2+ + * INTERRUPT **** NOT SUPPORTED **** + * + * COPYRIGHT (c) 1989-1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + */ + +#include <rtems.h> +#include <bsp.h> +#include <shm.h> + +/* + * configured if currently polling of interrupt driven + */ + +#define INTERRUPT 0 /* XXX: */ +#define POLLING 1 /* XXX: fix me -- is polling ONLY!!! */ + + +shm_config_table BSP_shm_cfgtbl; + +void Shm_Get_configuration( + rtems_unsigned32 localnode, + shm_config_table **shmcfg +) +{ + BSP_shm_cfgtbl.base = 0x0; + BSP_shm_cfgtbl.length = 1 * MEGABYTE; + BSP_shm_cfgtbl.format = SHM_BIG; + + /* + * Override cause_intr or shm_isr if your target has + * special requirements. + */ + + BSP_shm_cfgtbl.cause_intr = Shm_Cause_interrupt; + +#ifdef NEUTRAL_BIG + BSP_shm_cfgtbl.convert = NULL_CONVERT; +#else + BSP_shm_cfgtbl.convert = CPU_swap_u32; +#endif + + BSP_shm_cfgtbl.poll_intr = POLLED_MODE; + BSP_shm_cfgtbl.Intr.address = NO_INTERRUPT; + BSP_shm_cfgtbl.Intr.value = NO_INTERRUPT; + BSP_shm_cfgtbl.Intr.length = NO_INTERRUPT; + + *shmcfg = &BSP_shm_cfgtbl; +} diff --git a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/lock.c b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/lock.c new file mode 100644 index 0000000000..7101bbd4e0 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/lock.c @@ -0,0 +1,86 @@ +/* Shared Memory Lock Routines + * + * This shared memory locked queue support routine need to be + * able to lock the specified locked queue. Interrupts are + * disabled while the queue is locked to prevent preemption + * and deadlock when two tasks poll for the same lock. + * previous level. + * + * COPYRIGHT (c) 1989-1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + */ + +#include <rtems.h> +#include <bsp.h> +#include <shm.h> + +/* + * Shm_Initialize_lock + * + * Initialize the lock for the specified locked queue. + */ + +void Shm_Initialize_lock( + Shm_Locked_queue_Control *lq_cb +) +{ + lq_cb->lock = LQ_UNLOCKED; +} + +/* void _Shm_Lock( &lq_cb ) + * + * This shared memory locked queue support routine locks the + * specified locked queue. It disables interrupts to prevent + * a deadlock condition. + */ + +void Shm_Lock( + Shm_Locked_queue_Control *lq_cb +) +{ + rtems_unsigned32 isr_level; + rtems_unsigned32 *lockptr = (rtems_unsigned32 *) &lq_cb->lock; + rtems_unsigned32 lock_value; + + lock_value = 0x80000000; + rtems_interrupt_disable( isr_level ); + + Shm_isrstat = isr_level; + while ( lock_value ) { + asm volatile( "" + : "=r" (lockptr), "=r" (lock_value) + : "0" (lockptr), "1" (lock_value) + ); + /* + * If not available, then may want to delay to reduce load on lock. + */ + + if ( lock_value ) + delay( 10 ); /* approximately 10 microseconds */ + } +} + +/* + * Shm_Unlock + * + * Unlock the lock for the specified locked queue. + */ + +void Shm_Unlock( + Shm_Locked_queue_Control *lq_cb +) +{ + rtems_unsigned32 isr_level; + + lq_cb->lock = SHM_UNLOCK_VALUE; + isr_level = Shm_isrstat; + rtems_interrupt_enable( isr_level ); +} + diff --git a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/mpisr.c b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/mpisr.c new file mode 100644 index 0000000000..1911d89d67 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/mpisr.c @@ -0,0 +1,47 @@ +/* Shm_isr_nobsp() + * + * COPYRIGHT (c) 1989-1998. + * On-Line Applications Research Corporation (OAR). + * Copyright assigned to U.S. Government, 1994. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.OARcorp.com/rtems/license.html. + * + * $Id$ + */ + +#include <rtems.h> +#include <bsp.h> +#include <shm.h> + +rtems_isr Shm_isr_nobsp( void ) +{ + /* + * If this routine has to do anything other than the mpisr.c + * found in the generic driver, then copy the contents of the generic + * mpisr.c and augment it to satisfy this particular board. Typically, + * you need to have a board specific mpisr.c when the interrupt + * must be cleared. + * + * If the generic mpisr.c satisifies your requirements, then + * remove this routine from your target's shmsupp/mpisb.c file. + * Then simply install the generic Shm_isr in the Shm_setvec + * routine below. + */ +} + +/* Shm_setvec + * + * This driver routine sets the SHM interrupt vector to point to the + * driver's SHM interrupt service routine. + * + * Input parameters: NONE + * + * Output parameters: NONE + */ + +void Shm_setvec( void ) +{ + /* XXX: FIX ME!!! */ +} |