1 files changed, 157 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/include/bsp.h b/c/src/lib/libbsp/powerpc/mpc8260ads/include/bsp.h
new file mode 100644
index 0000000000..7fc940cbe5
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/mpc8260ads/include/bsp.h
@@ -0,0 +1,157 @@
+/*  bsp.h
+ *
+ *  This include file contains all board IO definitions.
+ *
+ *  XXX : put yours in here
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  $Id$
+ */
+
+#ifndef __NO_BSP_h
+#define __NO_BSP_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rtems.h>
+#include <console.h>
+#include <clockdrv.h>
+#include <mpc8260.h>
+#include <mpc8260/cpm.h>
+#include <mpc8260/mmu.h>
+#include <mpc8260/console.h>
+#include <bsp/irq.h>
+
+/*
+ * Board configuration registers
+ */
+
+typedef struct bcsr
+
+{
+    rtems_unsigned32  bcsr0; /* Board Control and Status Register */
+    rtems_unsigned32  bcsr1;
+    rtems_unsigned32  bcsr2;
+    rtems_unsigned32  bcsr3;
+
+} BCSR;
+
+#define UART1_E	0x02000002		/* bit 6 of BCSR1 */
+#define UART2_E	0x01000001		/* bit 7 of BCSR1 */
+
+#define GP0_LED 0x02000002    /*  bit 6 of BCSR0 */
+#define GP1_LED 0x01000001    /*  bit 7 of BCSR0 */
+
+/*
+ * Network driver configuration
+ */
+struct rtems_bsdnet_ifconfig;
+extern int rtems_enet_driver_attach (struct rtems_bsdnet_ifconfig *config, int attaching);
+#define RTEMS_BSP_NETWORK_DRIVER_NAME	"eth1"
+#define RTEMS_BSP_NETWORK_DRIVER_ATTACH	rtems_enet_driver_attach
+
+
+
+/* miscellaneous stuff assumed to exist */
+
+extern rtems_configuration_table BSP_Configuration;
+/*
+ * We need to decide how much memory will be non-cacheable. This
+ * will mainly be memory that will be used in DMA (network and serial
+ * buffers).
+ */
+/*
+#define NOCACHE_MEM_SIZE 512*1024
+*/
+
+/*
+ *  Define the time limits for RTEMS Test Suite test durations.
+ *  Long test and short test duration limits are provided.  These
+ *  values are in seconds and need to be converted to ticks for the
+ *  application.
+ *
+ */
+
+#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
+#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
+
+/*
+ *  Stuff for Time Test 27
+ */
+
+#define MUST_WAIT_FOR_INTERRUPT 0
+
+#define Install_tm27_vector( handler ) \
+   do { \
+	static rtems_irq_connect_data scIrqData = { \
+	  PPC_IRQ_SCALL, \
+	  (rtems_irq_hdl) handler, \
+	  NULL, \
+	  NULL, \
+	  NULL  \
+	}; \
+	BSP_install_rtems_irq_handler (&scIrqData); \
+   } while(0)
+
+#define Cause_tm27_intr() asm volatile ("sc")
+
+#define Clear_tm27_intr()
+
+#define Lower_tm27_intr()
+
+/* Constants */
+/*
+#define RAM_START 0
+#define RAM_END   0x1000000
+*/
+
+
+/*
+ *  Device Driver Table Entries
+ */
+
+/*
+ * NOTE: Use the standard Console driver entry
+ */
+ 
+/*
+ * NOTE: Use the standard Clock driver entry
+ */
+
+/*
+ * How many libio files we want
+ */
+
+#define BSP_LIBIO_MAX_FDS       20
+
+/* functions */
+
+void bsp_cleanup( void );
+
+#if 0
+void M8260ExecuteRISC( rtems_unsigned32 command );
+void *M8260AllocateBufferDescriptors( int count );
+void *M8260AllocateRiscTimers( int count );
+extern char M8260DefaultWatchdogFeeder;
+#endif
+
+rtems_isr_entry set_vector(                    /* returns old vector */
+  rtems_isr_entry     handler,                  /* isr routine        */
+  rtems_vector_number vector,                   /* vector number      */
+  int                 type                      /* RTEMS or RAW intr  */
+);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+/* end of include file */