1 files changed, 0 insertions, 93 deletions
diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/README.OTHERBOARDS b/c/src/lib/libbsp/powerpc/motorola_powerpc/README.OTHERBOARDS
deleted file mode 100644
index 52dbe60793..0000000000
--- a/c/src/lib/libbsp/powerpc/motorola_powerpc/README.OTHERBOARDS
+++ /dev/null
@@ -1,93 +0,0 @@
-This BSP is designed to support multiple Motorola PowerPC boards.  The
-following extract from some email from Eric Valette should provide
-the basic information required to use this BSP on other models.
-
-
-Joel>      + I am sure there are other Motorola boards which this BSP should
-Joel>        support.  If you know of other models that should work, list
-Joel>        them off to me.  I will make them aliases and note them as
-Joel>        untested in the status.
-
-Extract of motorola.c :
-
-static const mot_info_t mot_boards[] = {
-  {0x300, 0x00, "MVME 2400"},
-  {0x010, 0x00, "Genesis"},
-  {0x020, 0x00, "Powerstack (Series E)"},
-  {0x040, 0x00, "Blackhawk (Powerstack)"},
-  {0x050, 0x00, "Omaha (PowerStack II Pro3000)"},
-  {0x060, 0x00, "Utah (Powerstack II Pro4000)"},
-  {0x0A0, 0x00, "Powerstack (Series EX)"},
-  {0x1E0, 0xE0, "Mesquite cPCI (MCP750)"},
-  {0x1E0, 0xE1, "Sitka cPCI (MCPN750)"},
-  {0x1E0, 0xE2, "Mesquite cPCI (MCP750) w/ HAC"},
-  {0x1E0, 0xF6, "MTX Plus"},
-  {0x1E0, 0xF7, "MTX wo/ Parallel Port"},
-  {0x1E0, 0xF8, "MTX w/ Parallel Port"},
-  {0x1E0, 0xF9, "MVME 2300"},
-  {0x1E0, 0xFA, "MVME 2300SC/2600"},
-  {0x1E0, 0xFB, "MVME 2600 with MVME712M"},
-  {0x1E0, 0xFC, "MVME 2600/2700 with MVME761"},
-  {0x1E0, 0xFD, "MVME 3600 with MVME712M"},
-  {0x1E0, 0xFE, "MVME 3600 with MVME761"},
-  {0x1E0, 0xFF, "MVME 1600-001 or 1600-011"},
-  {0x000, 0x00, ""}
-};
-
-In theory, each board starting with 0x1E0 should be really straighforward
-to port (604 proc or above and raven host bridge...).
-
-Joel> Then we just have to add README.BOARD_MODEL and TIMES.BOARD_MODEL
-
-I should also make a README to explain that some file containing
-switch statement should be completed (e.g libbsp/powerpc/shared/irq_init.c 
-[NOTE: This is that README. :) ]
-
-       ------------------------------
-  if ( (currentBoard == MESQUITE) ) {
-    VIA_isa_bridge_interrupts_setup();
-    known_cpi_isa_bridge = 1;
-  }
-  if (!known_cpi_isa_bridge) {
-    printk("Please add code for PCI/ISA bridge init to libbsp/shared/irq/irq_init.c\n");
-    printk("If your card works correctly please add a test and set known_cpi_isa_bridge to true\n");
-  }
-       ------------------------------
-
-and libbsp/powerpc/mpc6xx/execeptions/raw_exception.c
-
-       -------------------------------
-
-int mpc604_vector_is_valid(rtems_vector vector)
-{
-  /*
-   * Please fill this for MVME2307
-   */
-  printk("Please complete libcpu/powerpc/XXX/raw_exception.c\n");
-  return 0;
-}
-
-int mpc60x_set_exception  (const rtems_raw_except_connect_data* except)
-{
-    unsigned int level;
-
-    if (current_ppc_cpu == PPC_750) {
-      if (!mpc750_vector_is_valid(except->exceptIndex)){
-        return 0;
-      }
-      goto exception_ok;
-    }
-    if (current_ppc_cpu == PPC_604) {
-      if (!mpc604_vector_is_valid(except->exceptIndex)){
-        return 0;
-      }
-      goto exception_ok;
-    }
-    printk("Please complete libcpu/powerpc/XXX/raw_exception.c\n");
-    return 0;
-    -----------------------------------
-
-NB : re readding the code I should have done a switch... TSSSS.A future patche
-     I think.
-
-