1 files changed, 0 insertions, 121 deletions
diff --git a/c/src/lib/libbsp/powerpc/mcp750/startup/cEntry.c b/c/src/lib/libbsp/powerpc/mcp750/startup/cEntry.c
index b92bff21be..e69de29bb2 100644
--- a/c/src/lib/libbsp/powerpc/mcp750/startup/cEntry.c
+++ b/c/src/lib/libbsp/powerpc/mcp750/startup/cEntry.c
@@ -1,121 +0,0 @@
-/*
- *
- */
-#include <bsp/consoleIo.h>
-#include <libcpu/spr.h>
-#include <bsp/residual.h>
-#include <bsp/pci.h>
-#include <bsp/openpic.h>
-#include <bsp/irq.h>
-#include <bsp.h>
-#include <libcpu/bat.h>
-
-extern void _return_to_ppcbug();
-extern unsigned long __rtems_end;
-
-RESIDUAL residualCopy;
-#define INIT_STACK_SIZE 0x1000
-#define INTR_STACK_SIZE 0x4000
-
-void BSP_panic(char *s)
-{
-  printk("RTEMS 4.x PANIC %s\n", s);
-  _return_to_ppcbug();
-}
-
-void _BSP_Fatal_error(unsigned int v)
-{
-  printk("RTEMS 4.x PANIC ERROR %x\n", v);
-  _return_to_ppcbug();
-}
-
-void
-boot_card(RESIDUAL* r3, void *r4, void* r5, char *additional_boot_options)
-{
-  int err;
-  unsigned char *stack;
-  unsigned l2cr;
-  register unsigned char* intrStack;
-  register unsigned int intrNestingLevel = 0;
-  
-  L1_caches_enables();
-  stack = ((unsigned char*) &__rtems_end) + INIT_STACK_SIZE;
-  intrStack = ((unsigned char*) &__rtems_end) + INIT_STACK_SIZE + INTR_STACK_SIZE;
-  asm volatile ("mtspr	273, %0" : "=r" (intrStack) : "0" (intrStack));
-  asm volatile ("mtspr	272, %0" : "=r" (intrNestingLevel) : "0" (intrNestingLevel));
-  residualCopy = *r3;
-#define NO_DYNAMIC_EXCEPTION_VECTOR_INSTALL
-#undef  NO_DYNAMIC_EXCEPTION_VECTOR_INSTALL
-#ifndef NO_DYNAMIC_EXCEPTION_VECTOR_INSTALL  
-  initialize_exceptions();
-#endif
-  select_console(CONSOLE_LOG);
-
-  /* We check that the keyboard is present and immediately 
-   * select the serial console if not.
-   */
-  err = kbdreset();
-  if (err) select_console(CONSOLE_SERIAL);
-
-  
-  printk("Welcome to RTEMS 4.0.2 on Motorola MCP750\n\n\n");
-  printk("-----------------------------------------\n");
-  printk("Residuals are located at %x\n", (unsigned) r3);
-  printk("Additionnal boot options are %s\n", additional_boot_options);
-  printk("-----------------------------------------\n");
-
-  printk("Initial system stack at %x\n",stack);
-  l2cr = get_L2CR();
-  printk("Initial L2CR value = %x\n", l2cr);
-  if (! (l2cr & 0x80000000))
-    set_L2CR(0xb9A14000);
-#ifdef TEST_RETURN_TO_PPCBUG  
-  printk("Hit <Enter> to return to PPCBUG monitor\n");
-  printk("When Finished hit GO. It should print <Back from monitor>\n");
-  debug_getc();
-  _return_to_ppcbug();
-  printk("Back from monitor\n");
-  _return_to_ppcbug();
-#endif /* TEST_RETURN_TO_PPCBUG  */
-
-  /*
-   * Init MMU block address translation to enable hardware
-   * access
-   */
-  /*
-   * PC legacy IO space used for inb/outb and all PC
-   * compatible hardware
-   */
-  setdbat(1, 0x80000000, 0x80000000, 0x10000000, IO_PAGE);
-  /*
-   * PCI devices memory area. Needed to access OPENPIC features
-   * provided by the RAVEN
-   */
-  setdbat(2, 0xc0000000, 0xc0000000, 0x08000000, IO_PAGE);
-  /*
-   * Must have acces to open pic PCI ACK registers 
-   * provided by the RAVEN
-   */
-  setdbat(3, 0xfeff0000, 0xfeff0000, 0x10000, IO_PAGE);
-
-  printk("Going to start PCI buses scanning and initialization\n");
-  InitializePCI();
-  printk("Number of PCI buses is found : %d\n", BusCountPCI());
-#ifdef TEST_RAW_EXCEPTION_CODE  
-  printk("Testing exception handling Part 1\n");
-  /*
-   * Cause a software exception
-   */
-  __asm__ __volatile ("sc");
-  /*
-   * Check we can still catch exceptions
-   */
-  printk("Testing exception handling Part 2\n");
-  __asm__ __volatile ("sc");
-#endif  
-  BSP_rtems_irq_mng_init(0);
-  printk("Init done\n");
-  debug_getc();
-  while(1);
-}
-