1 files changed, 135 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/powerpc/gen405/include/bsp.h b/c/src/lib/libbsp/powerpc/gen405/include/bsp.h
new file mode 100644
index 0000000000..6d4975fc94
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/gen405/include/bsp.h
@@ -0,0 +1,135 @@
+/*  bsp.h
+ *
+ *  This include file contains all GEN405 board IO definitions.
+ *
+ * derived from helas403/include/bsp.h:
+ *  Id: bsp.h,v 1.4 2001/06/18 17:01:48 joel Exp 
+ *  Author:	Thomas Doerfler <td@imd.m.isar.de>
+ *              IMD Ingenieurbuero fuer Microcomputertechnik
+ *
+ *  COPYRIGHT (c) 1998 by IMD
+ * 
+ *  Changes from IMD are covered by the original distributions terms.
+ *  This file has been derived from the papyrus BSP.
+ *
+ *  Author:	Andrew Bray <andy@i-cubed.co.uk>
+ *
+ *  COPYRIGHT (c) 1995 by i-cubed ltd.
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *      for any purpose is hereby granted without fee, provided that
+ *      the above copyright notice and this notice appears in all
+ *      copies, and that the name of i-cubed limited not be used in
+ *      advertising or publicity pertaining to distribution of the
+ *      software without specific, written prior permission.
+ *      i-cubed limited makes no representations about the suitability
+ *      of this software for any purpose.
+ *
+ *  Derived from c/src/lib/libbsp/no_cpu/no_bsp/include/bsp.h
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  $Id$
+ *
+ */
+
+#ifndef __GEN405_h
+#define __GEN405_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <bspopts.h>
+
+/*
+ *  confdefs.h overrides for this BSP:
+ *   - number of termios serial ports (defaults to 1)
+ *   - Interrupt stack space is not minimum if defined.
+ */
+
+/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
+#define CONFIGURE_INTERRUPT_STACK_MEMORY  (16 * 1024)
+
+#ifdef ASM
+/* Definition of where to store registers in alignment handler */
+#define ALIGN_REGS 0x0140
+
+#else
+#include <rtems.h>
+#include <console.h>
+#include <clockdrv.h>
+#include <console.h>
+#include <iosupp.h>
+
+/*
+ *  Define the time limits for RTEMS Test Suite test durations.
+ *  Long test and short test duration limits are provided.  These
+ *  values are in seconds and need to be converted to ticks for the
+ *  application.
+ *
+ */
+
+#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
+#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
+
+
+/*
+ *  Stuff for Time Test 27
+ */
+
+#define MUST_WAIT_FOR_INTERRUPT 0
+
+#define Install_tm27_vector( handler ) set_vector( (handler), PPC_IRQ_SCALL, 1 )
+
+#define Cause_tm27_intr()  asm volatile ("sc")
+
+#define Clear_tm27_intr()
+
+#define Lower_tm27_intr()
+
+/* Constants */
+
+#define RAM_START 0
+#define RAM_END   0x00800000
+
+
+/* miscellaneous stuff assumed to exist */
+
+extern rtems_configuration_table BSP_Configuration;     /* owned by BSP */
+extern rtems_cpu_table           Cpu_table;             /* owned by BSP */
+
+/*
+ *  Device Driver Table Entries
+ */
+ 
+/*
+ * NOTE: Use the standard Console driver entry
+ */
+ 
+/*
+ * NOTE: Use the standard Clock driver entry
+ */
+ 
+/* functions */
+
+rtems_isr_entry set_vector(                    /* returns old vector */
+  rtems_isr_entry     handler,                  /* isr routine        */
+  rtems_vector_number vector,                   /* vector number      */
+  int                 type                      /* RTEMS or RAW intr  */
+);
+#endif /* ASM */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+/* end of include file */