diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/dmv177/cable.doc')
-rw-r--r-- | c/src/lib/libbsp/powerpc/dmv177/cable.doc | 97 |
1 files changed, 0 insertions, 97 deletions
diff --git a/c/src/lib/libbsp/powerpc/dmv177/cable.doc b/c/src/lib/libbsp/powerpc/dmv177/cable.doc deleted file mode 100644 index e77fbd9a95..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/cable.doc +++ /dev/null @@ -1,97 +0,0 @@ -# -# Cable information for the DY-4 DMV177 -# -# $Id$ -# - -Background -========== - -All serial cables described in this file were built using RJ-45 ribbon -cables which were plugged into DB-25 or DB-9 adapters wired as described. -Matching the colors of the wires in the shell is the easiest way to -make sure the cable is built properly. - -The board is configured as follows: - - - An MC68681 is the first two serial ports. These are RS-232 and may - be accessed via the front panel or the P2. The front panel connector - has both A and B serial ports on a single connector. DY-4 part number - "OBYC3ASSY901132-000 Rev-" brings these ports out to two DB-25 - female connectors. - - - The MC68681 serial ports are also accessible on the P2 connector. - DY-4 part number "OBYC3ASSY901080-004 Rev A" brings these out - to DB-9 female connectors. These were not used in this effort. - - - A Z85C30 is used for the third and fourth serial ports. These are - RS-422 and may only be accessed via the P2 connector. These are - brought out to DB-25 male connectors. An RS-422 to RS-232 converter - was used to interface with these serial ports. - -References -========== - - - Linux Serial FAQ - - http://ahmed.egypt.com/electronics/serial - - DY-4 Documentation - -RS-422 Converter -================ - -An RS-422 to RS-232 converter from B&B Electronics was used to -adapt the RS-422 signals so they could be used with a normal -RS-232 serial port. Here is the information required to purchase -one of these: - - RS-232/RS-422 Converter: Model 422LCON - Power Supply: Model 422PS - - B&B Electronics Manufacturing Company - 707 Dayton Road - PO Box 1040 - Ottawa, IL 61350 - Voice: (815) 433-5100 - FAX: (815)434-7094 - - -Front Panel RS-232 Connection to a PC -===================================== - - Board's DB-25 PC's DB-9 Color in - Channel A COM1 Shell - ============= ============ ========= - RX on pin 2 TX on pin 2 Red - TX on pin 3 RX on pin 3 Blue - GND on pin 7 GND on pin 5 Black - DTR on pin 20 DTR on pin 4 Brown - - No other signals are used. - -RS-422 Connection to a PC -========================= - -This requires two cables with the converter connecting them. - -P2 RS-422 to the RS-422/RS-232 Converter -======================================== - - Board's Converter's Color in - DB-25 RS-422 DB-25 Shell - =============== ============== ======== - TXD_A on pin 2 RDA on pin 5 Red - TXD_B on pin 14 RDB on pin 17 Blue - RX_A on pin 3 TDA on pin 2 Brown - RX_B on pin 16 TDB on pin 14 Green - GND on pin 7 GND on pin 7 Black - - - Converter's PC's DB-9 Color in - RS-232 DB-25 COM1 Shell - =============== ============== ======== - TX on pin 2 TX on pin 2 Blue - RX on pin 3 RX on pin 3 Red - GND on pin 5 GND on pin 5 Black - DTR on pin 4 DTR on pin 4 Brown - - No other signals |