1 files changed, 0 insertions, 303 deletions
diff --git a/c/src/lib/libbsp/powerpc/beatnik/vme/vmeconfig.c b/c/src/lib/libbsp/powerpc/beatnik/vme/vmeconfig.c
deleted file mode 100644
index 383cfc4e96..0000000000
--- a/c/src/lib/libbsp/powerpc/beatnik/vme/vmeconfig.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/* Standard VME bridge configuration for MVME5500, MVME6100 */
-
-/* 
- * Authorship
- * ----------
- * This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was
- *     created by Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
- * 	   Stanford Linear Accelerator Center, Stanford University.
- * 
- * Acknowledgement of sponsorship
- * ------------------------------
- * The 'beatnik' BSP was produced by
- *     the Stanford Linear Accelerator Center, Stanford University,
- * 	   under Contract DE-AC03-76SFO0515 with the Department of Energy.
- * 
- * Government disclaimer of liability
- * ----------------------------------
- * Neither the United States nor the United States Department of Energy,
- * nor any of their employees, makes any warranty, express or implied, or
- * assumes any legal liability or responsibility for the accuracy,
- * completeness, or usefulness of any data, apparatus, product, or process
- * disclosed, or represents that its use would not infringe privately owned
- * rights.
- * 
- * Stanford disclaimer of liability
- * --------------------------------
- * Stanford University makes no representations or warranties, express or
- * implied, nor assumes any liability for the use of this software.
- * 
- * Stanford disclaimer of copyright
- * --------------------------------
- * Stanford University, owner of the copyright, hereby disclaims its
- * copyright and all other rights in this software.  Hence, anyone may
- * freely use it for any purpose without restriction.  
- * 
- * Maintenance of notices
- * ----------------------
- * In the interest of clarity regarding the origin and status of this
- * SLAC software, this and all the preceding Stanford University notices
- * are to remain affixed to any copy or derivative of this software made
- * or distributed by the recipient and are to be affixed to any copy of
- * software made or distributed by the recipient that contains a copy or
- * derivative of this software.
- * 
- * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
- */ 
-
-#include <rtems.h>
-#include <rtems/bspIo.h>
-#include <bsp.h>
-#include <bsp/VME.h>
-#include <bsp/VMEConfig.h>
-#include <bsp/irq.h>
-#include <bsp/vmeUniverse.h>
-#define _VME_TSI148_DECLARE_SHOW_ROUTINES
-#include <bsp/vmeTsi148.h>
-#include <libcpu/bat.h>
-
-/* Use a weak alias for the VME configuration.
- * This permits individual applications to override
- * this routine.
- * They may even create an 'empty'
- *
- *    void BSP_vme_config(void) {}
- *
- * which will avoid linking in the Universe driver
- * at all :-).
- */
-
-void BSP_vme_config(void) __attribute__ (( weak, alias("__BSP_default_vme_config") ));
-
-typedef struct {
-	int				(*xlate_adrs)(int, int, unsigned long, unsigned long, unsigned long *);
-	int				(*install_isr)(unsigned long, BSP_VME_ISR_t, void *);
-	int				(*remove_isr)(unsigned long, BSP_VME_ISR_t, void *);
-	BSP_VME_ISR_t	(*get_isr)(unsigned long vector, void **);
-	int				(*enable_int_lvl)(unsigned int);
-	int				(*disable_int_lvl)(unsigned int);
-	int				(*outbound_p_cfg)(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
-	int				(*inbound_p_cfg) (unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
-	void			(*outbound_p_show)(FILE*);
-	void			(*inbound_p_show) (FILE*);
-	void            (*reset_bus)(void);
-	int				(*install_irq_mgr)(int, int, int, ...);
-} VMEOpsRec, *VMEOps;
-
-static VMEOpsRec uniOpsRec = {
-	xlate_adrs: 		vmeUniverseXlateAddr,
-	install_isr: 		vmeUniverseInstallISR,
-	remove_isr: 		vmeUniverseRemoveISR,
-	get_isr:	 		vmeUniverseISRGet,
-	enable_int_lvl:		vmeUniverseIntEnable,
-	disable_int_lvl:	vmeUniverseIntDisable,
-	outbound_p_cfg:		vmeUniverseMasterPortCfg,
-	inbound_p_cfg:		vmeUniverseSlavePortCfg,
-	outbound_p_show:	vmeUniverseMasterPortsShow,
-	inbound_p_show:		vmeUniverseSlavePortsShow,
-	reset_bus:          vmeUniverseResetBus,
-	install_irq_mgr:	vmeUniverseInstallIrqMgrAlt,
-};
-
-static VMEOpsRec tsiOpsRec = {
-	xlate_adrs: 		vmeTsi148XlateAddr,
-	install_isr: 		vmeTsi148InstallISR,
-	remove_isr: 		vmeTsi148RemoveISR,
-	get_isr:	 		vmeTsi148ISRGet,
-	enable_int_lvl:		vmeTsi148IntEnable,
-	disable_int_lvl:	vmeTsi148IntDisable,
-	outbound_p_cfg:		vmeTsi148OutboundPortCfg,
-	inbound_p_cfg:		vmeTsi148InboundPortCfg,
-	outbound_p_show:	vmeTsi148OutboundPortsShow,
-	inbound_p_show:		vmeTsi148InboundPortsShow,
-	reset_bus:          vmeTsi148ResetBus,
-	install_irq_mgr:	vmeTsi148InstallIrqMgrAlt,
-};
-
-static VMEOps theOps = 0;
-
-int
-BSP_vme2local_adrs(unsigned long am, unsigned long vmeaddr, unsigned long *plocaladdr)
-{
-int rval=theOps->xlate_adrs(1,0,am,vmeaddr,plocaladdr);
-	*plocaladdr+=PCI_MEM_BASE;
-	return rval;
-}
-
-int
-BSP_local2vme_adrs(unsigned long am, unsigned long localaddr, unsigned long *pvmeaddr)
-{
-	return theOps->xlate_adrs(0, 0, am,localaddr+PCI_DRAM_OFFSET,pvmeaddr);
-}
-
-int
-BSP_installVME_isr(unsigned long vector, BSP_VME_ISR_t handler, void *arg)
-{
-	return theOps->install_isr(vector, handler, arg);
-}
-
-int
-BSP_removeVME_isr(unsigned long vector, BSP_VME_ISR_t handler, void *arg)
-{
-	return theOps->remove_isr(vector, handler, arg);
-}
-
-/* retrieve the currently installed ISR for a given vector */
-BSP_VME_ISR_t
-BSP_getVME_isr(unsigned long vector, void **parg)
-{
-	return theOps->get_isr(vector, parg);
-}
-
-int
-BSP_enableVME_int_lvl(unsigned int level)
-{
-	return theOps->enable_int_lvl(level);
-}
-
-int
-BSP_disableVME_int_lvl(unsigned int level)
-{
-	return theOps->disable_int_lvl(level);
-}
-
-int
-BSP_VMEOutboundPortCfg(
-	unsigned long port,
-	unsigned long address_space,
-	unsigned long vme_address,
-	unsigned long pci_address,
-	unsigned long size)
-{
-	return theOps->outbound_p_cfg(port, address_space, vme_address, pci_address, size);
-}
-
-int
-BSP_VMEInboundPortCfg(
-	unsigned long port,
-	unsigned long address_space,
-	unsigned long vme_address,
-	unsigned long pci_address,
-	unsigned long size)
-{
-	return theOps->inbound_p_cfg(port, address_space, vme_address, pci_address, size);
-}
-
-void
-BSP_VMEOutboundPortsShow(FILE *f)
-{
-	theOps->outbound_p_show(f);
-}
-
-void
-BSP_VMEInboundPortsShow(FILE *f)
-{
-	theOps->inbound_p_show(f);
-}
-
-void
-BSP_VMEResetBus(void)
-{
-	theOps->reset_bus();
-}
-
-static unsigned short
-tsi_clear_errors(int quiet)
-{
-unsigned long	v;
-unsigned short	rval;
-	v = vmeTsi148ClearVMEBusErrors(0);
-
-	/* return bits 8..23 of VEAT; set bit 15 to make sure rval is nonzero on error */
-	rval =  v ? ((v>>8) & 0xffff) | (1<<15) : 0;
-	return rval;
-}
-
-void
-__BSP_default_vme_config(void)
-{
-int err = 1;
-	if ( 0 == vmeUniverseInit() ) {
-		theOps = &uniOpsRec;
-		vmeUniverseReset();
-	} else if ( 0 == vmeTsi148Init() ) {
-		theOps = &tsiOpsRec;
-		vmeTsi148Reset();
-		_BSP_clear_vmebridge_errors = tsi_clear_errors;
-	} else 
-		return; /* no VME bridge found chip */
-
-  /* map VME address ranges */
-  BSP_VMEOutboundPortCfg(
-	0,
-	VME_AM_EXT_SUP_DATA,
-	_VME_A32_WIN0_ON_VME,
-	_VME_A32_WIN0_ON_PCI,
-	0x0e000000
-	);
-  BSP_VMEOutboundPortCfg(
-	1,
-	VME_AM_STD_SUP_DATA,
-	0x00000000,
-	_VME_A24_ON_PCI,
-	0x00ff0000);
-  BSP_VMEOutboundPortCfg(
-	2,
-	VME_AM_SUP_SHORT_IO,
-	0x00000000,
-	_VME_A16_ON_PCI,
-	0x00010000);
-
-#ifdef _VME_CSR_ON_PCI
-  /* Map VME64 CSR */
-  BSP_VMEOutboundPortCfg(
-		  7,
-		  VME_AM_CSR,
-		  0,
-		  _VME_CSR_ON_PCI,
-		  0x01000000);
-#endif
-
-#ifdef _VME_DRAM_OFFSET
-  /* map our memory to VME */
-  BSP_VMEInboundPortCfg(
-	0,
-	VME_AM_EXT_SUP_DATA | VME_AM_IS_MEMORY,
-	_VME_DRAM_OFFSET,
-	PCI_DRAM_OFFSET,
-	BSP_mem_size);
-#endif
-
-  /* stdio is not yet initialized; the driver will revert to printk */
-  BSP_VMEOutboundPortsShow(0);
-  BSP_VMEInboundPortsShow(0);
-
-  switch (BSP_getBoardType()) {
-	case MVME6100:
-		err = theOps->install_irq_mgr(
-					VMETSI148_IRQ_MGR_FLAG_SHARED,
-					0, BSP_IRQ_GPP_0 + 20,
-					1, BSP_IRQ_GPP_0 + 21,
-					2, BSP_IRQ_GPP_0 + 22,
-					3, BSP_IRQ_GPP_0 + 23,
-					-1);
-	break;
-
-	case MVME5500:
-		err = theOps->install_irq_mgr(
-					VMEUNIVERSE_IRQ_MGR_FLAG_SHARED |
-					VMEUNIVERSE_IRQ_MGR_FLAG_PW_WORKAROUND,
-					0, BSP_IRQ_GPP_0 + 12,
-					1, BSP_IRQ_GPP_0 + 13,
-					2, BSP_IRQ_GPP_0 + 14,
-					3, BSP_IRQ_GPP_0 + 15,
-					-1);
-	break;
-
-	default:
-		printk("WARNING: unknown board; ");
-	break;
-  }
-  if ( err )
-	printk("VME interrupt manager NOT INSTALLED (error: %i)\n", err);
-}