diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/beatnik/network/if_mve/if_mve_pub.h')
-rw-r--r-- | c/src/lib/libbsp/powerpc/beatnik/network/if_mve/if_mve_pub.h | 423 |
1 files changed, 423 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/powerpc/beatnik/network/if_mve/if_mve_pub.h b/c/src/lib/libbsp/powerpc/beatnik/network/if_mve/if_mve_pub.h new file mode 100644 index 0000000000..876c3fefdf --- /dev/null +++ b/c/src/lib/libbsp/powerpc/beatnik/network/if_mve/if_mve_pub.h @@ -0,0 +1,423 @@ +/* $Id$ */ +#ifndef RTEMS_BSDNET_IF_MVE_PUBLIC_SYMBOLS_H +#define RTEMS_BSDNET_IF_MVE_PUBLIC_SYMBOLS_H + +/* + * Authorship + * ---------- + * This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was + * created by Till Straumann <strauman@slac.stanford.edu>, 2005-2007, + * Stanford Linear Accelerator Center, Stanford University. + * + * Acknowledgement of sponsorship + * ------------------------------ + * The 'beatnik' BSP was produced by + * the Stanford Linear Accelerator Center, Stanford University, + * under Contract DE-AC03-76SFO0515 with the Department of Energy. + * + * Government disclaimer of liability + * ---------------------------------- + * Neither the United States nor the United States Department of Energy, + * nor any of their employees, makes any warranty, express or implied, or + * assumes any legal liability or responsibility for the accuracy, + * completeness, or usefulness of any data, apparatus, product, or process + * disclosed, or represents that its use would not infringe privately owned + * rights. + * + * Stanford disclaimer of liability + * -------------------------------- + * Stanford University makes no representations or warranties, express or + * implied, nor assumes any liability for the use of this software. + * + * Stanford disclaimer of copyright + * -------------------------------- + * Stanford University, owner of the copyright, hereby disclaims its + * copyright and all other rights in this software. Hence, anyone may + * freely use it for any purpose without restriction. + * + * Maintenance of notices + * ---------------------- + * In the interest of clarity regarding the origin and status of this + * SLAC software, this and all the preceding Stanford University notices + * are to remain affixed to any copy or derivative of this software made + * or distributed by the recipient and are to be affixed to any copy of + * software made or distributed by the recipient that contains a copy or + * derivative of this software. + * + * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03 + */ +#include <rtems.h> +#include <rtems/rtems_bsdnet.h> +#include <bsp/early_enet_link_status.h> +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +extern int rtems_mve_attach(struct rtems_bsdnet_ifconfig *, int); +extern rtems_bsdnet_early_link_check_ops rtems_mve_early_link_check_ops; + +/* Low-level Driver API. + * This provides driver access to applications that want to use e.g., the second + * ethernet interface w/o running the BSD TCP/IP stack. + */ + +/* Opaque handle */ +struct mveth_private; + +/* Direct assignment of MVE flags to user API relies on irqs and x-irqs not overlapping */ +#define BSP_MVE_IRQ_RX (1<<2) +#define BSP_MVE_IRQ_TX (1<<0) +#define BSP_MVE_IRQ_LINK (1<<16) + +/* Setup an interface. + * Allocates resources for descriptor rings and sets up the driver software structure. + * + * Arguments: + * unit: + * interface # (1..2). The interface must not be attached to BSD. + * + * driver_tid: + * ISR posts RTEMS event # ('unit' - 1) to task with ID 'driver_tid' and disables interrupts + * from this interface. + * + * void (*cleanup_txbuf)(void *user_buf, void *cleanup_txbuf_arg, int error_on_tx_occurred): + * Pointer to user-supplied callback to release a buffer that had been sent + * by BSP_mve_send_buf() earlier. The callback is passed 'cleanup_txbuf_arg' + * and a flag indicating whether the send had been successful. + * The driver no longer accesses 'user_buf' after invoking this callback. + * CONTEXT: This callback is executed either by BSP_mve_swipe_tx() or + * BSP_mve_send_buf(), BSP_mve_init_hw(), BSP_mve_stop_hw() (the latter + * ones calling BSP_mve_swipe_tx()). + * void *cleanup_txbuf_arg: + * Closure argument that is passed on to 'cleanup_txbuf()' callback; + * + * void *(*alloc_rxbuf)(int *p_size, unsigned long *p_data_addr), + * Pointer to user-supplied callback to allocate a buffer for subsequent + * insertion into the RX ring by the driver. + * RETURNS: opaque handle to the buffer (which may be a more complex object + * such as an 'mbuf'). The handle is not used by the driver directly + * but passed back to the 'consume_rxbuf()' callback. + * Size of the available data area and pointer to buffer's data area + * in '*psize' and '*p_data_area', respectively. + * If no buffer is available, this routine should return NULL in which + * case the driver drops the last packet and re-uses the last buffer + * instead of handing it out to 'consume_rxbuf()'. + * CONTEXT: Called when initializing the RX ring (BSP_mve_init_hw()) or when + * swiping it (BSP_mve_swipe_rx()). + * + * + * void (*consume_rxbuf)(void *user_buf, void *consume_rxbuf_arg, int len); + * Pointer to user-supplied callback to pass a received buffer back to + * the user. The driver no longer accesses the buffer after invoking this + * callback (with 'len'>0, see below). 'user_buf' is the buffer handle + * previously generated by 'alloc_rxbuf()'. + * The callback is passed 'cleanup_rxbuf_arg' and a 'len' + * argument giving the number of bytes that were received. + * 'len' may be <=0 in which case the 'user_buf' argument is NULL. + * 'len' == 0 means that the last 'alloc_rxbuf()' had failed, + * 'len' < 0 indicates a receiver error. In both cases, the last packet + * was dropped/missed and the last buffer will be re-used by the driver. + * NOTE: the data are 'prefixed' with two bytes, i.e., the ethernet packet header + * is stored at offset 2 in the buffer's data area. Also, the FCS (4 bytes) + * is appended. 'len' accounts for both. + * CONTEXT: Called from BSP_mve_swipe_rx(). + * void *cleanup_rxbuf_arg: + * Closure argument that is passed on to 'consume_rxbuf()' callback; + * + * rx_ring_size, tx_ring_size: + * How many big to make the RX and TX descriptor rings. Note that the sizes + * may be 0 in which case a reasonable default will be used. + * If either ring size is < 0 then the RX or TX will be disabled. + * Note that it is illegal in this case to use BSP_mve_swipe_rx() or + * BSP_mve_swipe_tx(), respectively. + * + * irq_mask: + * Interrupts to enable. OR of flags from above. + * + */ +struct mveth_private * +BSP_mve_setup( + int unit, + rtems_id driver_tid, + void (*cleanup_txbuf)(void *user_buf, void *cleanup_txbuf_arg, int error_on_tx_occurred), + void *cleanup_txbuf_arg, + void *(*alloc_rxbuf)(int *p_size, uintptr_t *p_data_addr), + void (*consume_rxbuf)(void *user_buf, void *consume_rxbuf_arg, int len), + void *consume_rxbuf_arg, + int rx_ring_size, + int tx_ring_size, + int irq_mask +); + +/* + * Alternate 'setup' routine allowing the user to install an ISR rather + * than a task ID. + * All parameters (other than 'isr' / 'isr_arg') and the return value + * are identical to the BSP_mve_setup() entry point. + */ +struct mveth_private * +BSP_mve_setup_1( + int unit, + void (*isr)(void *isr_arg), + void *isr_arg, + void (*cleanup_txbuf)(void *user_buf, void *cleanup_txbuf_arg, int error_on_tx_occurred), + void *cleanup_txbuf_arg, + void *(*alloc_rxbuf)(int *p_size, uintptr_t *p_data_addr), + void (*consume_rxbuf)(void *user_buf, void *consume_rxbuf_arg, int len), + void *consume_rxbuf_arg, + int rx_ring_size, + int tx_ring_size, + int irq_mask +); + + +/* + * Initialize interface hardware + * + * 'mp' handle obtained by from BSP_mve_setup(). + * 'promisc' whether to set promiscuous flag. + * 'enaddr' pointer to six bytes with MAC address. Read + * from the device if NULL. + * + * Note: Multicast filters are cleared by this routine. + * However, in promiscuous mode the mcast filters + * are programmed to accept all multicast frames. + */ +void +BSP_mve_init_hw(struct mveth_private *mp, int promisc, unsigned char *enaddr); + +/* + * Clear multicast hash filter. No multicast frames are accepted + * after executing this routine (unless the hardware was initialized + * in 'promiscuous' mode). + */ +void +BSP_mve_mcast_filter_clear(struct mveth_private *mp); + +/* + * Program multicast filter to accept all multicast frames + */ +void +BSP_mve_mcast_filter_accept_all(struct mveth_private *mp); + +/* + * Add a MAC address to the multicast filter. + * Existing entries are not changed but note that + * the filter is imperfect, i.e., multiple MAC addresses + * may alias to a single filter entry. Hence software + * filtering must still be performed. + * + * If a higher-level driver implements IP multicasting + * then multiple IP addresses may alias to the same MAC + * address. This driver maintains a 'reference-count' + * which is incremented every time the same MAC-address + * is passed to this routine; the address is only removed + * from the filter if BSP_mve_mcast_filter_accept_del() + * is called the same number of times (or by BSP_mve_mcast_filter_clear). + */ +void +BSP_mve_mcast_filter_accept_add(struct mveth_private *mp, unsigned char *enaddr); + +/* + * Remove a MAC address from the multicast filter. + * This routine decrements the reference count of the given + * MAC-address and removes it from the filter once the + * count reaches zero. + */ +void +BSP_mve_mcast_filter_accept_del(struct mveth_private *mp, unsigned char *enaddr); + +/* + * Shutdown hardware and clean out the rings + */ +void +BSP_mve_stop_hw(struct mveth_private *mp); + +/* calls BSP_mve_stop_hw(), releases all resources and marks the interface + * as unused. + * RETURNS 0 on success, nonzero on failure. + * NOTE: the handle MUST NOT be used after successful execution of this + * routine. + */ +int +BSP_mve_detach(struct mveth_private *mp); + +/* + * Enqueue a mbuf chain or a raw data buffer for transmission; + * RETURN: #bytes sent or -1 if there are not enough free descriptors + * + * If 'len' is <=0 then 'm_head' is assumed to point to a mbuf chain. + * OTOH, a raw data packet (or a different type of buffer) + * may be send (non-BSD driver) by pointing data_p to the start of + * the data and passing 'len' > 0. + * 'm_head' is passed back to the 'cleanup_txbuf()' callback. + * + * Comments: software cache-flushing incurs a penalty if the + * packet cannot be queued since it is flushed anyways. + * The algorithm is slightly more efficient in the normal + * case, though. + * + * RETURNS: # bytes enqueued to device for transmission or -1 if no + * space in the TX ring was available. + */ +int +BSP_mve_send_buf(struct mveth_private *mp, void *m_head, void *data_p, int len); + +/* Descriptor scavenger; cleanup the TX ring, passing all buffers + * that have been sent to the cleanup_tx() callback. + * This routine is called from BSP_mve_send_buf(), BSP_mve_init_hw(), + * BSP_mve_stop_hw(). + * + * RETURNS: number of buffers processed. + */ +int +BSP_mve_swipe_tx(struct mveth_private *mp); + +/* Retrieve all received buffers from the RX ring, replacing them + * by fresh ones (obtained from the alloc_rxbuf() callback). The + * received buffers are passed to consume_rxbuf(). + * + * RETURNS: number of buffers processed. + */ +int +BSP_mve_swipe_rx(struct mveth_private *mp); + +/* read ethernet address from hw to buffer */ +void +BSP_mve_read_eaddr(struct mveth_private *mp, unsigned char *eaddr); + +/* read/write media word. + * 'cmd': can be SIOCGIFMEDIA, SIOCSIFMEDIA, 0 or 1. The latter + * are aliased to the former for convenience. + * 'parg': pointer to media word. + * + * RETURNS: 0 on success, nonzero on error + * + * NOTE: This routine is thread-safe. + */ +int +BSP_mve_media_ioctl(struct mveth_private *mp, int cmd, int *parg); + +/* Interrupt related routines */ + +/* Note: the BSP_mve_enable/disable/ack_irqs() entry points + * are deprecated. + * The newer API where the user passes a mask allows + * for more selective control. + */ + +/* Enable all supported interrupts at device */ +void +BSP_mve_enable_irqs(struct mveth_private *mp); + +/* Disable all supported interrupts at device */ +void +BSP_mve_disable_irqs(struct mveth_private *mp); + +/* Acknowledge (and clear) all supported interrupts. + * RETURNS: interrupts that were raised. + */ +uint32_t +BSP_mve_ack_irqs(struct mveth_private *mp); + +/* Enable interrupts included in 'mask' (leaving + * already enabled interrupts on). If the mask + * includes bits that were not passed to the 'setup' + * routine then the behavior is undefined. + */ +void +BSP_mve_enable_irq_mask(struct mveth_private *mp, uint32_t irq_mask); + +/* Disable interrupts included in 'mask' (leaving + * other ones that are currently enabled on). If the + * mask includes bits that were not passed to the 'setup' + * routine then the behavior is undefined. + * + * RETURNS: Bitmask of interrupts that were enabled upon entry + * into this routine. This can be used to restore the + * previous state. + */ +uint32_t +BSP_mve_disable_irq_mask(struct mveth_private *mp, uint32_t irq_mask); + +/* Acknowledge and clear selected interrupts. + * + * RETURNS: All pending interrupts. + * + * NOTE: Only pending interrupts contained in 'mask' + * are cleared. Others are left pending. + * + * This routine can be used to check for pending + * interrupts (pass mask == 0) or to clear all + * interrupts (pass mask == -1). + */ +uint32_t +BSP_mve_ack_irq_mask(struct mveth_private *mp, uint32_t mask); + +/* If the PHY link status changes then some + * internal settings in the ethernet controller's + * serial port need to be updated to match the + * PHY settings. Use this routine to perform the + * necessary steps after a link change has been + * detected. + * + * RETURNS: 0 on success, -1 if the PHY state + * could not be determined. + * + * The current state of the media as read + * by BSP_mve_media_ioctl() is returned in + * *pmedia. + * + * NOTE: This routine calls BSP_mve_media_ioctl(). + */ +int +BSP_mve_ack_link_chg(struct mveth_private *mp, int *pmedia); + +/* Retrieve the driver daemon TID that was passed to + * BSP_mve_setup(). + */ + +rtems_id +BSP_mve_get_tid(struct mveth_private *mp); + +/* Dump statistics to file (stdout if NULL) + * + * NOTE: this routine is not thread safe + */ +void +BSP_mve_dump_stats(struct mveth_private *mp, FILE *f); + +/* + * + * Example driver task loop (note: no synchronization of + * buffer access shown!). + * RTEMS_EVENTx = 0,1 or 2 depending on IF unit. + * + * / * setup (obtain handle) and initialize hw here * / + * + * do { + * / * ISR disables IRQs and posts event * / + * rtems_event_receive( RTEMS_EVENTx, RTEMS_WAIT | RTEMS_EVENT_ANY, RTEMS_NO_TIMEOUT, &evs ); + * irqs = BSP_mve_ack_irqs(handle); + * if ( irqs & BSP_MVE_IRQ_TX ) { + * BSP_mve_swipe_tx(handle); / * cleanup_txbuf() callback executed * / + * } + * if ( irqs & BSP_MVE_IRQ_RX ) { + * BSP_mve_swipe_rx(handle); / * alloc_rxbuf() and consume_rxbuf() executed * / + * } + * if ( irqs & BSP_MVE_IRQ_LINK ) { + * / * update serial port settings from current link status * / + * BSP_mve_ack_link_chg(handle, 0); + * } + * BSP_mve_enable_irqs(handle); + * } while (1); + * + */ + +#ifdef __cplusplus + } +#endif + +#endif |