1 files changed, 47 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/mpisr.c b/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/mpisr.c
new file mode 100644
index 0000000000..592c0cfcc5
--- /dev/null
+++ b/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/mpisr.c
@@ -0,0 +1,47 @@
+/*  Shm_isr_nobsp()
+ *
+ *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
+ *  On-Line Applications Research Corporation (OAR).
+ *  All rights assigned to U.S. Government, 1994.
+ *
+ *  This material may be reproduced by or for the U.S. Government pursuant
+ *  to the copyright license under the clause at DFARS 252.227-7013.  This
+ *  notice must appear in all copies of this file and its derivatives.
+ *
+ *  $Id$
+ */
+
+#include <rtems.h>
+#include <bsp.h>
+#include <shm.h>
+
+rtems_isr Shm_isr_nobsp( void )
+{
+  /*
+   *  If this routine has to do anything other than the mpisr.c
+   *  found in the generic driver, then copy the contents of the generic
+   *  mpisr.c and augment it to satisfy this particular board.  Typically,
+   *  you need to have a board specific mpisr.c when the interrupt
+   *  must be cleared.
+   *
+   *  If the generic mpisr.c satisifies your requirements, then
+   *  remove this routine from your target's shmsupp/mpisb.c file.
+   *  Then simply install the generic Shm_isr in the Shm_setvec
+   *  routine below.
+   */
+}
+
+/*  Shm_setvec
+ *
+ *  This driver routine sets the SHM interrupt vector to point to the
+ *  driver's SHM interrupt service routine.
+ *
+ *  Input parameters:  NONE
+ *
+ *  Output parameters: NONE
+ */
+
+void Shm_setvec( void )
+{
+  /* XXX: FIX ME!!! */
+}