1 files changed, 0 insertions, 143 deletions
diff --git a/c/src/lib/libbsp/no_cpu/no_bsp/clock/ckinit.c b/c/src/lib/libbsp/no_cpu/no_bsp/clock/ckinit.c
deleted file mode 100644
index 426b55137b..0000000000
--- a/c/src/lib/libbsp/no_cpu/no_bsp/clock/ckinit.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*  ckinit.c
- *
- *  This file provides a template for the clock device driver initialization.
- *
- *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
- *  On-Line Applications Research Corporation (OAR).
- *  All rights assigned to U.S. Government, 1994.
- *
- *  This material may be reproduced by or for the U.S. Government pursuant
- *  to the copyright license under the clause at DFARS 252.227-7013.  This
- *  notice must appear in all copies of this file and its derivatives.
- *
- *  $Id$
- */
-
-#include <stdlib.h>
-
-#include <rtems.h>
-#include <bsp.h>
-#include <clockdrv.h>
-
-/*
- *  The interrupt vector number associated with the clock tick device
- *  driver.
- */
-
-#define CLOCK_VECTOR    4
-
-/*
- *  Clock_driver_ticks is a monotonically increasing counter of the
- *  number of clock ticks since the driver was initialized.
- */
-volatile rtems_unsigned32 Clock_driver_ticks;
-
-/*
- *  Clock_isrs is the number of clock ISRs until the next invocation of
- *  the RTEMS clock tick routine.  The clock tick device driver
- *  gets an interrupt once a millisecond and counts down until the
- *  length of time between the user configured microseconds per tick
- *  has passed.
- */
-
-rtems_unsigned32 Clock_isrs;              /* ISRs until next tick */
-
-/*
- *  The previous ISR on this clock tick interrupt vector.
- */
-
-rtems_isr_entry  Old_ticker;
-
-/*
- *  Clock_initialize
- *
- *  Device driver entry point for clock tick driver initialization.
- */
-
-rtems_device_driver Clock_initialize(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void *pargp,
-  rtems_id tid,
-  rtems_unsigned32 *rval
-)
-{
-  Install_clock( Clock_isr );
-}
-
-/*
- *  Reinstall_clock
- *
- *  Install a clock tick handler without reprogramming the chip.  This
- *  is used by the polling shared memory device driver.
- */
-
-void ReInstall_clock(
-  rtems_isr_entry clock_isr
-)
-{
-  rtems_unsigned32 isrlevel = 0;
-
-  /*
-   *  Disable interrupts and install the clock ISR vector using the
-   *  BSP dependent set_vector routine.  In the below example, the clock
-   *  ISR is on vector 4 and is an RTEMS interrupt.
-   */
-
-  rtems_interrupt_disable( isrlevel );
-   (void) set_vector( clock_isr, CLOCK_VECTOR, 1 );
-  rtems_interrupt_enable( isrlevel );
-}
-
-/*
- *  Install_clock
- *
- *  Install a clock tick handler and reprograms the chip.  This
- *  is used to initially establish the clock tick.
- */
-
-void Install_clock(
-  rtems_isr_entry clock_isr
-)
-{
-  /*
-   *  Initialize the clock tick device driver variables
-   */
-
-  Clock_driver_ticks = 0;
-  Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000;
-
-  /*
-   *  If ticks_per_timeslice is configured as non-zero, then the user
-   *  wants a clock tick.
-   */
-
-  if ( BSP_Configuration.ticks_per_timeslice ) {
-    Old_ticker = ( rtems_isr_entry ) set_vector( clock_isr, CLOCK_VECTOR, 1 );
-    /*
-     *  Hardware specific initialize goes here
-     */
-
-    /* XXX */
-  }
-
-  /*
-   *  Schedule the clock cleanup routine to execute if the application exits.
-   */
-
-  atexit( Clock_exit );
-}
-
-/*
- *  Clean up before the application exits
- */
-
-void Clock_exit( void )
-{
-  if ( BSP_Configuration.ticks_per_timeslice ) {
-
-    /* XXX: turn off the timer interrupts */
-
-    /* XXX: If necessary, restore the old vector */
-  }
-}