1 files changed, 129 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/mips/hurricane/include/bsp.h b/c/src/lib/libbsp/mips/hurricane/include/bsp.h
new file mode 100644
index 0000000000..289385840d
--- /dev/null
+++ b/c/src/lib/libbsp/mips/hurricane/include/bsp.h
@@ -0,0 +1,129 @@
+/*  bsp.h
+ *
+ *  This include file contains all board IO definitions.
+ *
+ *  XXX : put yours in here
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  bsp.h,v 1.12.4.1 2003/09/04 18:44:52 joel Exp
+ */
+/* @(#)bsp.h       03/15/96     1.1 */
+
+#ifndef __HURRICANE_BSP_h
+#define __HURRICANE_BSP_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <bspopts.h>
+
+#include <rtems.h>
+#include <rtems/iosupp.h>
+#include <rtems/console.h>
+#include <rtems/clockdrv.h>
+#include <libcpu/rm5231.h>
+
+/*
+ *  confdefs.h overrides for this BSP:
+ *   - number of termios serial ports (defaults to 1)
+ *   - Interrupt stack space is not minimum if defined.
+ */
+
+/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
+#define CONFIGURE_INTERRUPT_STACK_MEMORY  (4 * 1024)
+
+extern void WriteDisplay( char * string );
+
+/*
+ *  Define the time limits for RTEMS Test Suite test durations.
+ *  Long test and short test duration limits are provided.  These
+ *  values are in seconds and need to be converted to ticks for the
+ *  application.
+ *
+ */
+
+#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
+#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
+
+/*
+ *  Stuff for Time Test 27
+ */
+
+#define MUST_WAIT_FOR_INTERRUPT 0
+
+#define Install_tm27_vector( handler ) set_vector( (handler), 0, 1 )
+
+#define Cause_tm27_intr()
+
+#define Clear_tm27_intr()
+
+#define Lower_tm27_intr()
+
+extern uint32_t mips_get_timer( void );
+
+#define CPU_CLOCK_RATE_MHZ     (200)
+#define CLOCKS_PER_MICROSECOND ( CPU_CLOCK_RATE_MHZ ) /* equivalent to CPU clock speed in MHz */
+
+/*
+ *  Simple spin delay in microsecond units for device drivers.
+ *  This is very dependent on the clock speed of the target.
+ *
+ *  NOTE: This macro generates a warning like "integer constant out 
+ *        of range" which is safe to ignore.  In 64 bit mode, unsigned32
+ *        types are actually 64 bits long so that comparisons between
+ *        unsigned32 types and pointers are valid.  The warning is caused
+ *        by code in the delay macro that is necessary for 64 bit mode.
+ */
+
+#define rtems_bsp_delay( microseconds ) \
+  { \
+     unsigned32 _end_clock = \
+          mips_get_timer() + microseconds * CLOCKS_PER_MICROSECOND; \
+     _end_clock %= 0x100000000;  /* make sure result is 32 bits */ \
+     \
+     /* handle timer overflow, if necessary */ \
+     while ( _end_clock < mips_get_timer() );  \
+     \
+     while ( _end_clock > mips_get_timer() ); \
+  }
+
+/* Constants */
+
+#define RAM_START 0
+#define RAM_END   0x100000
+
+/* miscellaneous stuff assumed to exist */
+
+extern rtems_configuration_table BSP_Configuration;
+
+/*
+ *  Device Driver Table Entries
+ */
+
+/*
+ * NOTE: Use the standard Console driver entry
+ */
+ 
+/*
+ * NOTE: Use the standard Clock driver entry
+ */
+
+/* miscellaneous stuff assumed to exist */
+
+rtems_isr_entry set_vector(
+  rtems_isr_entry, rtems_vector_number, int );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif	/* __HURRICANE_BSP_h */
+
+/* end of include file */