diff options
Diffstat (limited to 'c/src/lib/libbsp/m68k/ods68302/include/bare.h')
-rw-r--r-- | c/src/lib/libbsp/m68k/ods68302/include/bare.h | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/c/src/lib/libbsp/m68k/ods68302/include/bare.h b/c/src/lib/libbsp/m68k/ods68302/include/bare.h index 3942ce9732..81352f4f3d 100644 --- a/c/src/lib/libbsp/m68k/ods68302/include/bare.h +++ b/c/src/lib/libbsp/m68k/ods68302/include/bare.h @@ -13,7 +13,7 @@ Chip selects are programmed as required. Three are controlled in the boot code. They are RAM, ROM, and peripherals. You can optionally configure the other two chip selects. - + SYSTEM_CLOCK - You must defined this. It is used for setting the baud rate. @@ -30,7 +30,7 @@ CSEL_1, CSEL_2 - If defined the other macros needed to define the chip select must be defined. If not defined they are not programmed and registers are left in the reset state. - + Card Specific Devices - The MVF card uses a chip select to address a range of peripherials (CSEL_2). These include front panel leds, and 4 digit diagnostic display device. Put what ever you need. @@ -45,7 +45,7 @@ This file allows a range of common parameters which vary from one variant of card to another to placed in a central file. - + */ /*****************************************************************************/ @@ -53,7 +53,7 @@ #define _BARE_H_ #if __cplusplus -extern "C" +extern "C" { #endif @@ -84,8 +84,8 @@ extern "C" #define CSEL_2_SIZE (0x00040000) #define CSEL_2_WAIT_STATES (OR_DTACK_EXT) -/* - * Need to define a watchdog period +/* + * Need to define a watchdog period */ #define WATCHDOG_TIMEOUT_PERIOD (3000 * 2) @@ -182,42 +182,42 @@ extern "C" #define PIA_BASE (PERIPHERIALS_BASE + 0x0001C000) #define LED_1 0x0002 -#define LED_1_GREEN 0xFFFD +#define LED_1_GREEN 0xFFFD #define LED_1_RED 0xFFFF -#define LED_1_OFF 0xFFFC +#define LED_1_OFF 0xFFFC #define LED_2 0x0001 -#define LED_2_GREEN 0xFFFE +#define LED_2_GREEN 0xFFFE #define LED_2_RED 0xFFFF #define LED_2_OFF 0xFFFC #define LED_3 0x0000 -#define LED_3_GREEN 0xFFFC +#define LED_3_GREEN 0xFFFC #define LED_3_RED 0xFFFC #define LED_3_OFF 0xFFFC #define LED_4 0x0000 -#define LED_4_GREEN 0xFFFC +#define LED_4_GREEN 0xFFFC #define LED_4_RED 0xFFFC #define LED_4_OFF 0xFFFC #define LED_5 0x0000 -#define LED_5_GREEN 0xFFFC +#define LED_5_GREEN 0xFFFC #define LED_5_RED 0xFFFC #define LED_5_OFF 0xFFFC #define LED_6 0x0000 -#define LED_6_GREEN 0xFFFC +#define LED_6_GREEN 0xFFFC #define LED_6_RED 0xFFFC #define LED_6_OFF 0xFFFC #define LED_7 0x0000 -#define LED_7_GREEN 0xFFFC +#define LED_7_GREEN 0xFFFC #define LED_7_RED 0xFFFC #define LED_7_OFF 0xFFFC #define LED_8 0x0000 -#define LED_8_GREEN 0xFFFC +#define LED_8_GREEN 0xFFFC #define LED_8_RED 0xFFFC #define LED_8_OFF 0xFFFC @@ -239,7 +239,7 @@ extern "C" #else #define GDB_RUN_MONITOR() (1 == 0) #endif - + #if __cplusplus } #endif |