1 files changed, 0 insertions, 89 deletions
diff --git a/c/src/lib/libbsp/m68k/mcf5235/startup/init5235.c b/c/src/lib/libbsp/m68k/mcf5235/startup/init5235.c
deleted file mode 100644
index 5066941be0..0000000000
--- a/c/src/lib/libbsp/m68k/mcf5235/startup/init5235.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- *  This is where the real hardware setup is done. A minimal stack
- *  has been provided by the start.S code. No normal C or RTEMS
- *  functions can be called from here.
- *
- * This routine is pretty simple for the uC5235 because all the hard
- * work has been done by the bootstrap dBUG code.
- */
-
-#include <rtems.h>
-#include <bsp.h>
-
-#define MM_SDRAM_BASE		(0x00000000)
-
-/*
- * MCF5235_BSP_START_FROM_FLASH comes from the linker script
- * If it is set to 0 then it is assumed that the motorola debug monitor
- * is present and we do not need to re-initialize the SDRAM. Otherwise,
- * if it is set to 1 then we want to boot our own code from flash and we
- * do need to initialize the SDRAM.
- */
-
-extern uint32_t MCF5235_BSP_START_FROM_FLASH;
-extern void CopyDataClearBSSAndStart (void);
-extern void INTERRUPT_VECTOR(void);
-
-extern void CopyVectors(const uint32_t* old, uint32_t* new);
-
-void Init5235 (void)
-{
-    int x;
-    volatile int temp = 0;
-    int *address_of_MCF5235_BSP_START_FROM_FLASH;
-
-    /*Setup the GPIO Registers */
-    MCF5235_GPIO_UART=0x3FFF;
-    MCF5235_GPIO_PAR_AD=0xE1;
-
-    /*Setup the Chip Selects so CS0 is flash */
-    MCF5235_CS_CSAR0 =(0xFFE00000 & 0xffff0000)>>16;
-    MCF5235_CS_CSMR0 = 0x001f0001;
-    MCF5235_CS_CSCR0 = 0x1980;
-
-    address_of_MCF5235_BSP_START_FROM_FLASH = (int *) & MCF5235_BSP_START_FROM_FLASH;
-    if ( (int)address_of_MCF5235_BSP_START_FROM_FLASH == 1) {
-        /*Setup the SDRAM  */
-        for(x=0; x<20000; x++)
-        {
-	       temp +=1;
-        }
-        MCF5235_SDRAMC_DCR  = 0x042E;
-        MCF5235_SDRAMC_DACR0 = 0x00001300;
-        MCF5235_SDRAMC_DMR0 = (0x00FC0000) | (0x00000001);
-        for(x=0; x<20000; x++)
-        {
-	        temp +=1;
-        }
-        /* set ip ( bit 3 ) in dacr */
-        MCF5235_SDRAMC_DACR0 |= (0x00000008) ;
-        /* init precharge */
-        *((unsigned long *)MM_SDRAM_BASE) = 0xDEADBEEF;
-        /* set RE in dacr */
-        MCF5235_SDRAMC_DACR0 |= (0x00008000);
-        /* wait */
-        for(x=0; x<20000; x++)
-        {
-	        temp +=1;
-        }
-        /* issue IMRS */
-        MCF5235_SDRAMC_DACR0 |= (0x00000040);
-        *((short *)MM_SDRAM_BASE) = 0;
-        for(x=0; x<60000; x++)
-        {
-	        temp +=1;
-        }
-        *((unsigned long*)MM_SDRAM_BASE)=0x12345678;
-    } /* we have finished setting up the sdram */
-
-    /* Copy the interrupt vector table to address 0x0 in SDRAM */
-    CopyVectors((const uint32_t *)&INTERRUPT_VECTOR, (uint32_t*)0);
-
-    m68k_set_vbr(0);
-
-    /*
-     * Copy data, clear BSS and call boot_card()
-     */
-    CopyDataClearBSSAndStart ();
-
-}