diff options
Diffstat (limited to 'c/src/lib/libbsp/m68k/gen68302/timer/timer.c')
-rw-r--r-- | c/src/lib/libbsp/m68k/gen68302/timer/timer.c | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/c/src/lib/libbsp/m68k/gen68302/timer/timer.c b/c/src/lib/libbsp/m68k/gen68302/timer/timer.c deleted file mode 100644 index 6749efc054..0000000000 --- a/c/src/lib/libbsp/m68k/gen68302/timer/timer.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * COPYRIGHT (c) 1989-1999. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#include <rtems.h> -#include <bsp.h> -#include <rtems/btimer.h> -#include <rtems/m68k/m68302.h> - -#define TMR2_VAL 0x071b /* Timer mode register - * (section 3.5.2.1 in 68302 manual) - * 15-8: "7" prescaler divide by 8 (x+1) - * 7-6: 00 dis. intr. on capture event - * 5: 0 active-low pulse - * 4: 1 intr. on reaching reference - * 3: 1 restart counter on reference - * 2-1: 01 master clock input source - * 0: 1 enable timer - */ -#define TRR2_VAL 2000 /* Timer reference register - * (section 3.5.2.2 in 68302 manual) - * 2000 ticks @ (16MHz/1)/8 = 1-ms count - */ - -uint32_t Timer_interrupts; - -bool benchmark_timer_find_average_overhead; - -rtems_isr timerisr(void); - -void benchmark_timer_initialize( void ) -{ - m302.reg.tmr2 = 0; /* disable timer */ - - Timer_interrupts = 0; /* clear timer ISR count */ - - m302.reg.trr2 = TRR2_VAL; /* set timer reference register */ - m302.reg.tmr2 = TMR2_VAL; /* set timer mode register */ - m302.reg.imr |= RBIT_IMR_TIMER2; /* set 68302 int-mask to allow ints */ -} - -/* - * The following controls the behavior of benchmark_timer_read(). - * - * FIND_AVG_OVERHEAD * instructs the routine to return the "raw" count. - * - * AVG_OVEREHAD is the overhead for starting and stopping the timer. It - * is usually deducted from the number returned. - * - * LEAST_VALID is the lowest number this routine should trust. Numbers - * below this are "noise" and zero is returned. - */ - -#define AVG_OVERHEAD 0 /* It typically takes X.X microseconds */ - /* (Y countdowns) to start/stop the timer. */ - /* This value is in microseconds. */ -#define LEAST_VALID 1 /* Don't trust a clicks value lower than this */ - -/* - * Return timer value in 1/2-microsecond units - */ -benchmark_timer_t benchmark_timer_read( void ) -{ - uint16_t clicks; - uint32_t total; - - /* - * Read the timer and see how many clicks it has been since counter - * rolled over. - */ - - clicks = m302.reg.tcn2; - - /* - * Total is calculated by taking into account the number of timer overflow - * interrupts since the timer was initialized and clicks since the last - * interrupts. - */ - - total = (Timer_interrupts * TRR2_VAL) + clicks; - - if ( benchmark_timer_find_average_overhead == true ) - return total; /* in XXX microsecond units */ - - if ( total < LEAST_VALID ) - return 0; /* below timer resolution */ - - /* - * Convert 1/2-microsecond count into microseconds - */ - - return (total - AVG_OVERHEAD) >> 1; -} - -void benchmark_timer_disable_subtracting_average_overhead( - bool find_flag -) -{ - benchmark_timer_find_average_overhead = find_flag; -} |