1 files changed, 0 insertions, 49 deletions
diff --git a/c/src/lib/libbsp/lm32/lm32_evr/README b/c/src/lib/libbsp/lm32/lm32_evr/README
deleted file mode 100644
index 13712c91e0..0000000000
--- a/c/src/lib/libbsp/lm32/lm32_evr/README
+++ /dev/null
@@ -1,49 +0,0 @@
-#  The Lattice Mico32 port uses the system_config.h generated by the Mico
-#  System Builder to retrieve the properties of the peripherals.
-#
-#   Implemented (in shared/ subdirectory)
-#     Polled console driver (uart)
-#     Clock interrupt with 10 ms tick
-#     Networking using Lattice tri-speed ethernet MAC
-#
-#   Todo
-#     Support more peripherals:
-#       - uart driver using interrupts
-#
-#  jukka.pietarinen@mrf.fi, 3.12.2008
-#    
-
-BSP NAME:           lm32_evr
-BOARD:              cRIO-EVR, Micro-Research Finland Oy
-BUS:                wishbone
-CPU FAMILY:         lm32 (Lattice Mico32)
-CPU:                small
-COPROCESSORS:       none
-MODE:               32 bit mode
-
-DEBUG MONITOR:      none
-
-PERIPHERALS
-===========
-TIMERS:             clock
-  RESOLUTION:       10 ms
-SERIAL PORTS:       uart
-REAL-TIME CLOCK:    none
-DMA:                none
-VIDEO:              none
-SCSI:               none
-NETWORKING:         tsmac
-
-To on the simulator included in lm32-gdb use these commands:
-
-tar sim --hw-device lm32cpu \
-  --hw-device "lm32uart/reg 0x80006000 0x100" \
-  --hw-device "/lm32uart > int int0 /lm32cpu" \
-  --hw-device "lm32timer/reg 0x80002000 0x80" \
-  --hw-device "/lm32timer > int int1 /lm32cpu" \
-  --memory-region 0x08000000,0x4000000
-load
-
-The simulator is VERY VERY slow when RTEMS is idle.
-To speed this up, add SIMULATOR_FAST_IDLE=1 to the
-configure command.