1 files changed, 0 insertions, 64 deletions
diff --git a/c/src/lib/libbsp/i960/rxgen960/timer/timerisr.S b/c/src/lib/libbsp/i960/rxgen960/timer/timerisr.S
deleted file mode 100644
index 984a360b39..0000000000
--- a/c/src/lib/libbsp/i960/rxgen960/timer/timerisr.S
+++ /dev/null
@@ -1,64 +0,0 @@
-/*  timer_isr()
- *
- *  This routine initializes the Z8536 timer on the SQSIO4 SQUALL
- *  board for the CVME961 board.  The timer is setup to provide a
- *  tick every 0x10000 / 2 milliseconds.  This is used to time
- *  executing code.
- *
- *  Input parameters:  NONE
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1997.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may in
- *  the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <rtems/asm.h>
-
-.set PORT_A,     0xc00000a8                 # port A
-.set PORT_B,     0xc00000a4                 # port B
-.set PORT_C,     0xc00000a0                 # port C
-.set CTL_PORT,   0xc00000ac                 # control port
-
-.set T1CSR,      0x0a                       # T1 command/status reg
-.set RELOAD,     0x24                       # clr IP & IUS,allow countdown
-
-/*
- * Duplicating this symbol is stupid but eliminates
- * toolset variation problems.
- */
-        PUBLIC(timerisr)
-        PUBLIC(_timerisr)
-SYM (timerisr):
-SYM (_timerisr):
-        #ldconst   1,r4
-        #modpc     0,r4,r4               # enable tracing
-
-        ld      _Ttimer_val,r6           # r6 = test timer
-
-        ldconst T1CSR,r4                 # r4 = T1 control status reg
-        stob    r4,CTL_PORT              # select T1CSR
-        ldconst RELOAD,r5                # r5 = reset value
-        stob    r5,CTL_PORT              # reset countdown
-        addo    1,r6,r6
-        st      r6,_Ttimer_val           # increment test timer
-loop_til_cleared:
-        /* clrbit 4,sf0,sf0 XXX JRS */
-        /* bbs    4,sf0,loop_til_cleared XXX JRS */
-leaf:   ret
-
-        .leafproc _flush_reg, flush_reg.lf
-        .globl    _flush_reg, flush_reg.lf
-_flush_reg:
-        lda     leaf,g14                 # g14 = exit address
-flush_reg.lf:
-        flushreg
-        mov     g14,g0                   # g0 = exit address
-        ldconst 0,g14                    # set g14 for non-leaf
-        bx      (g0)